Road And Building Department-RBD has published Tender For Upgradation Of Civil Infrastructure Of Biomedical Waste Management Area At Chc Baunsuni Under Kantamal Block For The Year 2022_23. Submission Date for this Tender is 03-07-2023. Civil Work Tenders in boudh Odisha. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Dismantling brick or stone masonry in lime or cement moratar above 3m. height including stacking the useful materials for reuse and removing the debris within 50mtr. lead. |
| 2 | Dismantaling & Removing Cement Concrete including the useful materials for reuse and removing the debris within 50mtr. lead. |
| 3 | Earth workin excavation of foundation hard soil with50 mtrinitial leadand1.5 mtr liftincluding rough dressing and breaking clods to minimum 5cm to 7cmand laying in layers not exceeding30 cm (12") in depthwithall labourand T&Prequired for thework includingfine dressing etc complete in all respect. |
| 4 | Supplying fillingfoundation and plinth withsand in 23.5cm (9") thick layersincludingwatering and ramming including cost, conveyance, royalities,taxesof all material, labour and T&P require for the work etc. complete as directed by E.I.C |
| 5 | Cement concrete of proportion (1:3:6) in foundation up to lowest bed level using crusher broken hard black granite metal of size 4cm down graded of approved quality from approved quarry as per approved design including hoisting lowering,laying compacting concrete in layers not exceeding 6" thick, watering, curing for three weeks shuttering the exposed surfaces, finished smooth, providing grooves of beads where necessary including cost, conveyance, royalty, & taxes of all materials, with labour, T&P required for the work etc., complete in all respects including dewatering if required as per direction of Engineer-in-charge. |
| 6 | Cement concrete (1:2:4)grade using 12mm sizeH.B.G Crusher broken aggregatesof approved quality including centering and shuttering including cost, conveyance, royalities,taxesof all material, labour and T&P require for the work etc. complete as directed by E.I.C. Andincluding cost of centering & shuttering ETC. |
| 7 | Fly ash brick masonary in Foundation & Plinth in CM(1:6) of 23cm x 11cmx8 cm size having crushing strength not les than 75 Kg/cm2 with dimensional tolerance including cost and conveyance of all materials and labour T&P etc complete. |
| 8 | Super structure (Ground Floor) |
| 9 | RCC in different work in gradeM-20 gradeusing 20mm& down gradedsizeH.G Crusher broken chips including cost, conveyance, royalities,taxesof all material, labour and T&P require for the work etc. complete as directed by E.I.C. Andincluding cost of centering & shuttering ETC. Column Base & Footing |
| 10 | Column |
| 11 | Plinth Beam |
| 12 | Lintel |
| 13 | Wall Beam |
| 14 | Roof slab |
| 15 | Chajja |
| 16 | Providing fitting and fixing in position R.C.C precast ring using of 5"-0" dia and 1"-0" height including cost material and labour and fixing in proper position. |
| 17 | Providing straighting,cutting,bending,binding of MS tor bar including tying the grills & placing in proper position including cost of 18 to 20 gauge binding wires & MS rod with all labour, T&P etc.complete |
| 18 | 12mm (1/2”) thick cement plaster (1:6) finished smooth to out side brick walls after raking out joints including watering and curing with cost and conveyance, of all materials and labour with T&P required for the work with all taxes and royalties etc. complete. |
| 19 | 16mmthick cement plaster (1:6) finished smooth to out side brick walls after raking out joints including watering and curing with cost and conveyance, of all materials and labour with T&P required for the work with all taxes and royalties etc. complete. |
| 20 | 2.5cm (1”) thick artificial stone flooring with cement concrete (1:2:4) laid to proper slope in to two layers using 12mm hard black broken granite stone chips of approved quality and from approved quarry including rounding the corners including watering and curing with cost conveyance of all materials and labour with T&P required for the work with royalties, taxes etc. complete |
| 21 | Painting two coats with any approved Colored Weather seal coat to outside surface coat of priming including cost of Paint with conveyance taxes of all materials and labour with T&P required for the work etc. complete |
| 22 | Wall Painting two coats with Plastic Emulsion paint over a coat of water bound wall cement primer on plastered surface with cost and conveyance royalties and taxes of all materials and labour with T&P required for the work etc. complete |
| 23 | Providing fitting and fixing in position of M.S.grills of approved quality and design including all materials, labour with T&P required for the work taxes and royalties etc. complete |
| 24 | Providing fitting and fixing of 80mm Cement Concrete InterlockingPaver block of M30 grade and and approved make variety coloured and size made by block backing including cost of sand papering polishing the surface with cost conveyance taxes of all materials and labour with T&P required for the work etc. complete. |
| 25 | Painting two coats to steel work with any approved enamale paint over a coat of primring including cost,conveyance, taxes and labour with T&P etc. complete. |
| 26 | GPH Supplying all materials , labour, T&P and providing and fixing to wall or ceiling and floor CPVC pipes conforming to IS: 15778 and G.I pipe fittings of the following nominal bore with clamps including making good the wall,ceiling and floor ,testing all complete as per P.H. specification and direction of Engineer-in-charge 25mm dia PVC ASTM pipe (sch-80) |
| 27 | Supplying all materials, labour T&P and fitting and fixing brass/CP fittings of the following nominal bore with supply of all joiniting materialsincluding cost & conveyance of all materials to worksite, payment oftaxes etc. allcomplete as per P.H specification and direction of the Engineer-in-charge. 15mm dia CP angle stop cock (Jaquar Make) |
| 28 | 15mm dia CPbib cock (Jaquar Make) |
| 29 | 25mm dia brassfull way valve (Shakti make) |
| 30 | 32mm dia brassfull way valve (Shakti make) |
| 31 | 15mm CP Extension piece |
| 32 | 125mm CP grating |
| 33 | 15mm size C.P. flange |
| 34 | Supplying all materials , labour, T&P and fixing rotational mouldedpolyethylene cylindrical vertical water storage tanks conforming to IS:12701/1996 including cutting holes through the tank and fixing mild steel tubes and fittings and providing extra sockets and jam nuts, fixing ball valve etc. including hoisting upto a height of 5 metres above ground level and placing the tank to the required position and providing 5.40 mtr. lengthx0.25 mtr widthKBbrickwork in cement mortar (1:6) of 0.46m height in staging and 0.13mtr thick circular protection wall of 0.46mtr height to support the tank,12mm thick cement plaster in cement mortar (1:6) over brick work, RCC slab of size 1.60mX1.60m and 0.10m thick ,RCC beam of 0.25mx0.30m and 3.40m average length in cement concrete (1:2:4) using 12mm size crusher broken hard black granite chips and required steel reinforcement including centering and shuttering,watering,curing ,cost of all materials,conveyance of all materials to worksite , payment of royalty, all taxesetc.all complete as per approved drawing , P.H. specification and direction ofEngineer-in-charge 1000 liters capacityPVC water storage tank |
| 35 | Supplying all materials, labour, T&P and fitting and fixing U-PVC SWR soil waste ventilating pipes and fittings of the following outside diameter conforming to ISI No 13592/1992 to walls with nails, bobbins and wooden plugs or laying in trenches including jointing with supply of approved rubber lubricant by non-heat application method/as per manufacturer"s specification, testing, earthwork in excavation in all kinds of soil and refilling of trenches , cost & conveyance of all materials to worksite, payment oftaxes etc.all complete as per P.H specification and direction of the Engineer-in-charge. 110mm U-PVC SWR Pipe (Ori Plast/Finolex/Supreme Make Type-B) |
| 36 | Supplying all materials, labour T&P and fixing wash basins with hole for pillar taps with cast iron or M.S.brackets painted white including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc, fixing pedestal for wash basin recessed at the back for the reception of pipes and fittings, fixing PVC waste pipe of 32mm nominal diameter for wash basin including brass check nut complete, fixing pillar taps capstan head screw down high pressure lettered "Hot" and "Cold" with long screws, shanks and back nuts of 15mm dia nominal bore, fixing 15mm dia PVC inlet connection pipe and making connection with pillar cocks and supply mains for wash basin, fixing 32mm dia CP brass waste, cost & conveyance of all materials to worksite, payment oftaxes etc. all complete as perP.H specification and direction of the Engineer-in-charge 550mmx400mm W.H.basin (Hindware/Parryware/Neycer make)with 15mm dia C.P.pillar cock (Plaza make) with |
| 37 | Supplying all materials, labour, T&P and fixing standard sized CP towel rail complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge Towel ring |
| 38 | Supplying all materials, labour, T&P and fixing standard sized glass-shelf with CP brass brackets and guard rail complete fixed to wooden plugs with CP screws as per specification and direction of Engineer in charge. 600mmx125mm plate glass shelf with CP/NP guard rails. |
| 39 | Supplying all materials, labour, T&P and fixing mirror of superior glass mounted on 6mm.thick A.C. sheet or ply wood sheet and fixed to wooden plugs with CP screws and washers complete as per specification and direction of Engineer in charge. 600mmx450mm size B.E mirror (swivelled type) |
| 40 | Supplying all materials, labour, T&P and laying in trenches (to level or slope) unplasticized P.V.C. pipe conforming to IS 4985/2000 of the following out side dia for class- 3 (0.60mpa ) including jointing with supply of approved solvent cement by non-heat application method/as per manufacture"s specification, provoding and laying in trench cement concrete (1:4:8) with 40mm size hard granite metal in the type C-1 standard bedding surrounding or encasing including concrete for bedding and curing etc all complete as per P.H. specification and direction of the Engineer in charge 100mm dia P.V.C. pipe |
| 41 | Supplying all materials labour T&P and constructing 1.40m dia x 2.00 m deep soak way pit with dry brick having crossing strength not less than 75Kg/CM2 to 99Kg/CM2 in CM(1:6) for the remaining 0.4572mm height of wall at top CC(1:3)inside and outside inside fill with dry brick khoa size 38mm ,CM thick RCC perforated slab to a height of 1.9012m from bottom covered by means of 50mmthick RCC wall cover in pieces filled with iron plugs including earth work in excavation refilling of cavity around the pit and painting the iron works complete as per PHD design and specification including carriage of all materials to site. |
| 42 | EI Recessed / Surface wiring to light point / fan point call bell point exhaust fan point / wall fan point with 1.5 sqmm FRLSH PVC insulated single core multistrand copper conductor of ISI marked in 20 mm dia non-metalic PVC conduit with 6 Amp, 250 V clip in type switch ISI marked and celling rose ISI marked mounted on G.I modular box with face plate & cover of suitable size, with 1.5 sq.mm FRLSH PVC Insulated single core multistrand copper conductor as earth wire including all accesories and connection as per direction of Engineer in Charge. (Make of wire Finolex /Polycab/ Anchor Havels/Eq) (Make of modular box cover,switch & socket-Legrand Myrios/schneider opale With 10Years Warenty. Group - A |
| 43 | Group - B |
| 44 | Group - C |
| 45 | Supply and fixing of 6Amp plug with 6Amp switch on existing board. (Modular type) (Make-Great white/ Legrand/Roma/Havells/HPL/ Cona) |
| 46 | Recessed wiringfor 5 / 6 amp socket outletwith2 x 6Amp, 250 V clip in type modular switch ISI markedmounted on G.I moular box with face plate & cover of suitable sizeincluding all accesories and connection on same switch board as per direction of Engineer-in-charge.(Separate) |
| 47 | Supplying and fixing of 15/16 Amp Plug point Modular type on modular metal box on surface/Recess with suitable size of Modular cover in front including cutting the wall and making good the same in cases of recessed conduit as required (Make-Great white/ Legrand / Roma/ Havells/ HPL/ Cona) |
| 48 | Receseedwiring to sub main wiring to following sq mm FRLS PVC insulated single core multistrand copper conductor of ISI marked conforming to IS-694/1990 in the following mm dia non-metallic heavy duty flexible conduit 1.6mm thick along with the followong sq mm FRLS PVC insulated single core multistrand copper conductor as earth wire as required. (Make of wire Finolex/Havells/Polycab/ V-Guard ) 2x1.5mm2 + 1x1.5mm2 |
| 49 | 2x2.5mm2 +1x1.5mm2 |
| 50 | 2x 4 mm2 +1x1.5mm2 |
| 51 | 2x 6 mm2 +1x2.5mm2 |
| 52 | 4x 6 mm2 +2x2.5mm2 |
| 53 | S/F of 100 A TPN Main Switch make Of Anchor/Havells/L&T/Cona |
| 54 | S/F of 100 A 4 pole Busbar make Of Anchor/Havells/ L&T/Cona |
| 55 | S/F of 63 amp FP MCB with Box make of Anchor/Havells/ L&T/Cona |
| 56 | S/F of 6 way Single door DB, 1x63 A DP MCB+ 4 x6-16 A Sp MCB make- Schneider /Legrand/ABB |
| 57 | S/F of Bakelite angle holder/batten holder of Modular type make of Havells/Cona/Anchor/Legrand |
| 58 | S/F of 9 watt Bulb make of Panasonic/Philips/crompton/jaquar make |
| 59 | S/F of tube light 18watt /20 watt LED fitting with cover (Make-Havells/ Philips/Crompton) as per the direction of side engineer in charge. |
| 60 | Supply and fixing of modular type Electronic Type fan regulator (Make- Cona/Anchor/ Usha/Bajaj) |
| 61 | S/F of 450mm,1400 rpm exhaust fan of Usha/Havells/Equivalent make |
| 62 | Extra for fixing of louvers / shutters complete with frame for exhust fan of all sizes |
| 63 | S/F of 45Wt. LED Street light fittings complete with Gl. bracket. Of Bajaj/Havells/Crompton/Philips make |
| 64 | S/F of Standard earthing complete with 3 mtr long G.I pipe including all accessories & connections |
| 65 | Providing and fixing 8 SWG (4 mm) dia copper wire on surface or in recess for loop earthing as required |
| 66 | Supply of 3 1/2 core 35 mm2 Al.Armoured cable ISI maked. (Make- Havells/Polycab/Equivalent) |
| 67 | Cable treanching in all type of soil including excavation of earth laying of cable with brick & sand including filing of loose soil upto ground level with Cable |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
