Brahmaputra Cracker And Polymer Limited-BCPL has published Tender For Contract For Interior Works Involving Furniture, Electrical, Plumbing And Hvac Of Bcpl Office At Nrl Centre, Guwahati. Submission Date for this Tender is 07-07-2023. Electrical Maintenance Tenders in Dibrugarh Assam. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 03-Jul-2023 | Date Corrigendum | Date | 07-07-2023 |
| Sl. No. | Item Description |
| 1 | BRICKWORK |
| 2 | Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to all levels. |
| 3 | Cement mortar 1:4 (1 cement :4 coarse sand) |
| 4 | PLASTERING |
| 5 | 10 mm cement plaster of mix : |
| 6 | 1:4 (1 cement: 4 fine sand) |
| 7 | 15 mm cement plaster on the rough side of single or half brick wall of mix : |
| 8 | 1:4 (1 cement: 4 fine sand) |
| 9 | FLOORING |
| 10 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineerin- Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 11 | Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily. |
| 12 | Glazed Vitrified tiles Matt/Antiskid finish of size |
| 13 | Size of Tile 600 x 600 mm |
| 14 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. |
| 15 | Size of Tile 800x800 mm |
| 16 | DISMANTLING |
| 17 | Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. |
| 18 | In cement mortar |
| 19 | WALL PUTTY |
| 20 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 21 | PAINTING |
| 22 | Wall painting with premium acrylic emulsion paint of interior grade,having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour |
| 23 | Two coats |
| 24 | Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content. |
| 25 | With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre |
| 26 | Applying priming coat: |
| 27 | With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) |
| 28 | Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @0.75 ltr/10 sqm of approved brand and manufacture |
| 29 | DOOR |
| 30 | Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. |
| 31 | 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws |
| 32 | Providing & fixing in position Phenol bonded Bamboowood panelled or panelled and glazed shutters for doors windows, clerestorey windows with pre-molded minimum 30mm thick planks, in approved colours, texture & finish. It shall have 10mm wide, 25mm deep grove to fit in panels. The bamboo wood shall have minimum density of 1000 Kg/cum, minimum Hardness 1000 Kgf. All styles and rails shall have profiled interlocking system locked in place by bamboo pins, all complete as per direction of Engineer in charge. |
| 33 | WOOD WORK |
| 34 | DOOR FRAME |
| 35 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately). |
| 36 | Second class teak wood |
| 37 | FALSE CEILING |
| 38 | Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with |
| 39 | recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer"s specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with : |
| 40 | 12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- (Part I) :2011 (Board with BIS certification marks) |
| 41 | HARDWARE FITTINGS |
| 42 | Providing, fitting and fixing of SS 304 grade Door Handles with all necessary fittings of Hafele company or equivalent |
| 43 | Providing, fitting and fixing of SS 304 grade 6 inch tower bolt with all necessary fittings of Hafele company or equivalent |
| 44 | Providing, fitting and fixing of SS 304 grade Door Stopper with all necessary fittings of Hafele company or equivalent |
| 45 | Providing, fitting and fixing of SS 304 grade Hydraulic Door Closure with all necessary fittings of Hafele company or equivalent |
| 46 | Providing, fitting and fixing of SS 304 grade Euro Profile Cylinder with all necessary fittings of Hafele company or equivalent |
| 47 | Providing, fitting and fixing of SS 304 grade Mortice Door Lock System with all necessary fittings of Hafele company or equivalent |
| 48 | Providing, fitting and fixing of SS 304 grade 6 inch ball bearing hinges with all necessary fittings of Hafele company or equivalent |
| 49 | SANITARY WORK |
| 50 | Providing, fitting and fixing of S.S Fore Tri Pillar tap with all necessary fittings of jaguar or equivalent make. Model : 27484IN-4-CP |
| 51 | Providing, fitting and fixing of S.S Health Faucet with all necessary fittings jaguar or equivalent make. Model : 97258IN-CP |
| 52 | Providing, fitting and fixing of S.S Paper Tissue Holder with all necessary fittings jaguar or equivalent make. Model : 5633IN-CP |
| 53 | Providing, fitting and fixing of Kohler Vive Wall Hung Bowl,Seat,INSTAFLUSHTM NXT GEN-PNEU IN WALL TANK with all necessary fittings jaguar or equivalent make. Model : 28780IN-0 ; 28781IN-0;26351IN-P-NA |
| 54 | Providing, fitting and fixing of Mirror (24 inch x 18 inch) with all necessary fittings Ankur or equivalent make. Model : DAR1010 |
| 55 | Providing, fitting and fixing of S.S Towel Ring with all necessary fittings jaguar or equivalent make. Model : AKP-CHR-35721P |
| 56 | Providing, fitting and fixing of S.S Soap Dish with all necessary fittings jaguar or equivalent make Model : AKP-CHR-35731P |
| 57 | Providing, fitting and fixing of S.S Grating with all necessary fittings Lipka or equivalent make |
| 58 | Providing, fitting and fixing of S.S Stop Cock with all necessary fittings jaguar or equivalent make Model : KUP-CHR-35053PM |
| 59 | Providing, fitting and fixing of S.S Bib Cock with all necessary fittings jaguar or equivalent make jaguar or equivalent make Model : KUP-CHR-35037PM |
| 60 | Providing, fitting and fixing of Wash Basin with pedestal with all necessary fittings including waste coupling jaguar or equivalent make. Model : ARS-WHT-39801; ARS-WHT-39301 |
| 61 | PIPING |
| 62 | Providing and fixing Polyethelene-Aluminium-Polyethelene PE-AL-PE Composite Pressure Pipes conforming to IS - 15450, U.V. stabilized with carbon black having thermal stability for hot & cold water supply, capable to withstand temperature up to 80°C, including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. elbows,tees, reducers, couplers & connectors etc., with clamps at 1.00 metre spacing.This includes testing of joints complete as per direction of the Engineer-incharge. |
| 63 | Concealed pipe with cutting chases & making good the walls |
| 64 | 1216(16mmOD) pipe |
| 65 | 1620(20mmOD) pipe |
| 66 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. |
| 67 | External work |
| 68 | 100 mm nominal dia Pipes |
| 69 | 80 mm nominal dia Pipes |
| 70 | 50 mm nominal dia Pipes |
| 71 | NON SCHEDULE ITEMS |
| 72 | FULL HEIGHT PARTITION WITH BOTH SIDE VENEER FINISH |
| 73 | Supplying and erecting fullheight wooden partitions as per drawing and conforming to the following specifications: |
| 74 | Basic Frame Work: |
| 75 | Well seasonedwood sections, treated with two coats of wood preservatives, 50 mm wide x 50 mm (minimum) at maximum 600 mm x 600 mm horizontal or vertical spacings as per site conditions. Vertical members shall be suitably anchored at ceiling level to ensure rigidity. |
| 76 | 19mm thick ply board on each face. |
| 77 | Finishing: |
| 78 | 4.0 mm thick veneer of same or combination shades finished with melanine polish provided on each face, with grooves formed as per drawings up to false ceilingheight from floor level. |
| 79 | 50 mm nominal dia Pipes |
| 80 | LOW HEIGHT PARTITION WITH BOTH SIDE VENEER FINISH WITH GLASS |
| 81 | Supplying and erecting lowheight wooden partitions with 12mm thick toughened glass on top as per drawing and conforming to the following specifications: |
| 82 | Basic Frame Work: |
| 83 | Well seasonedwood sections, treated with two coats of wood preservatives, 50 mm wide x 50 mm (minimum) at maximum 600 mm x 600 mm horizontal or vertical spacings as per site conditions. Vertical members shall be suitably anchored at ceiling level to ensure rigidity. |
| 84 | 19mm thick ply board on each face. |
| 85 | 12mm thick toughened glass |
| 86 | Finishing: |
| 87 | 4.0 mm thick veneer of same or combination shades finished with varnish polish provided on outer face and 1mm thick laminate provided on innerface, with grooves formed as per drawings up to a height of 1200mm from floor level. |
| 88 | Quoted rates shall include all necessary materials, accessories and labour and also allow provisions for electrical/ telephone/ computer wiring conduits and switch boxes, etc. ( Materials for wiring conduits and switch boxes shall be seperately paid ) |
| 89 | FULL HEIGHT TOUGHENED GLASS PARTITION |
| 90 | Supplying and erecting Full height12mm thick toughened glass with pasting of etching paper as per drawing and direction given by the engineer in charge. |
| 91 | CABINET BELOW PLATFORM |
| 92 | Providing and Supplyingin positioncabinet with shelf and shutter below plateform of different sizes with 600mm depth made of 19mm thick plyboard of approved makewith shelves as per drawing. All exposed surfacesof the shelffinished with 1mm thick matt finish laminateof approved make, all inner |
| 93 | surfaces finished with 0.8mm thick laminate,including all necessary hardware fittings etc. ofapproved quality and make. All items shall be carried out as per drawings anddirection given by the engineer-in-charge. |
| 94 | WALL CABINET |
| 95 | Providing and Supplyingin position Wall cabinet with shelf and shutter of 19mm thick plyboard. All exposed surfacesof the shelffinished with 1mm thick matt finish laminateof approved make, all inner |
| 96 | surfaces finished with 0.8mm thick laminate,including all necessary hardware fittings etc. ofapproved quality and make. All items shall be carried out as per drawings anddirection given by the engineer-in-charge. |
| 97 | CONFERENCE TABLE: |
| 98 | Providing and Supplyingin positionconference table with Rectangular shape3600 mmx 1000 mm |
| 99 | The table of height 750mm made of 19mm thick block board of approved make. The table finished with 1mm thick matt finish laminate on all exposed surfaces and inner side of the tablefinished with 0.8mm thick laminateof approved make,including all necessary hardware fittings. All works shall be carried out as per drawings anddirection given by the engineer-in-charge |
| 100 | RECEPTIONIST TABLE |
| 101 | Providing and Supplyingin positionreceptionist table of size 2400X900mm made of 19mm thick block board of approved makewith shelves, sliding key board, drawers |
| 102 | etc.All exposed surfacesof the table finished with 1mm thick matt finish laminateof approved make, all inner surfaces finished with 0.8mm thick laminate.Two or more coats ofenamel paint over a coat of primer is provided where laminate is not provided,including all necessary hardware fittings ofapproved quality and make. All items shall be carried out as per drawings anddirection given by the engineer-in-charge. |
| 103 | RECEPTIONIST TABLE |
| 104 | Providing and Supplying of MD Executive Desk With Extension TableModel : EBJ-01D24 Executive Desk with Extension table 1 229871 229871 Size: 2400w x 1900d x 760h material MDF : wood * Make: Featherlite |
| 105 | Providing and Supplying ofMD High back office chair with leather and matchingPVC Alu. armrest with alu. base knee tilt mechanism Model : CS 6031E-HB High back office chair with leather and matching PVC Alu. armrest with alu. base knee tilt mechanism * Make: Featherlite |
| 106 | Providing and Supplying ofMD PU VISITORS CHAIRPADDED CHROME ARMS SLEDGE CHROME FRAMEModel : CL8-011V PU VISITORS CHAIR PADDED CHROME ARMS SLEDGE CHROME FRAME * Make: Featherlite |
| 107 | Providing and Supplying ofMD Three Seater leatherette SofaModel : 933-3S Three Seater leatherette Sofa * Make: Featherlite |
| 108 | Providing and Supplying ofMD Square Table Chrome Frame with Glass Top 600 X 600mm Model 610 - FS Square Table Chrome Frame with Glass Top 600 X 600mm * Make: Featherlite |
| 109 | Providing and Supplying of Director"s Executive Desk with Extension table MODEL: HT-501 * Main Table Size: 2000W x 800D x 780H MM * Side Table Size 1010W x 500D x 650H MM * Make: Featherlite |
| 110 | Providing and Supplying of Director"s High back office chair with leather and matchingPVC Alu. armrest with alu. base knee tilt mechanismModel : CS 6031E-HB Make: Featherlite |
| 111 | Providing and Supplying of BRAVO VA FXD ARMS - PC* Bravo Low Back Visitor * Leatherette Seat & Back * Fixed Arms * Powdercoated Sledge Base * Make: Featherlite |
| 112 | Providing and Supplying of GM Executive Desk with Extension table MODEL: HT 531 * Main Table Size 1600W x 750D x 780H MM * Side Table Size 905W x 440D x 650H MM * Make: Featherlite |
| 113 | Providing and Supplying of GM MODEL: FP Invention HB - Height Adj Arms *Quotient High Back Chair with Multilock Mechanism , Gaslift & Two Way Adjustable Arms (Height & Swivel) with Chrome Base *Leatherette Seat & Back *Make: Featherlite |
| 114 | Providing and Supplying of GM MODEL: FP Invention Visitor - PU Arms *Quotient Visitors Chair with Chrome plated Sledge Base & Fixed Arms *Leatherette Seat & Back*Make: Featherlite |
| 115 | Providing and Supplying ofMODEL: VMT 1575 * MAIN TABLE * Size: 1500 W x 750 D x 750 HT MOBILE PEDESTAL 2D1F Size : 400W X 450D X 600HT Pedestal are made of 18mm thick PLB with 2 drawer unitsand 1 filling folder unit.*Make: Featherlite |
| 116 | Providing and Supplying of FP Invention HB - Height Adj Arms *Quotient High Back Chair with Multilock Mechanism , Gaslift & Two Way Adjustable Arms (Height & Swivel) with Chrome Base *Leatherette Seat & Back*Make: Featherlite |
| 117 | Providing and Supplying of FP Invention Visitor - PU Arms *Quotient Visitors Chair with Chromeplated 4 29758 119032 Sledge Base & Fixed Arms nos. each *Leatherette Seat & Back*Make: Featherlite |
| 118 | Providing and Supplying of L SHAPE WORKSTATION WITH 350MM HT SCREEN Size : 1800/900W X 600/600D X 750HT (4 NOS) Size : 1500W X 600D X 750HT ( 1 NO) *Make: Featherlite |
| 119 | Providing and Supplying of AMAZE MB GRAY ML ADJ ARMS * Medium Mesh Gray Chair * Self Calibrating Multilock Mechanism * Adjustable Lumbar Support * Height Adjustable Arms * Nylon Base *Make: Featherlite |
| 120 | Providing and Supplying ofS 902-3S Three Seater leatherette Sofa*Make: Featherlite |
| 121 | Providing and Supplying of Roller Horizontal Blinds of MAC or equivalent |
| 122 | Providing and Supplying ofRoller Vertical Blindsof MAC or equivalent |
| 123 | Air Handling Unit for Office Area |
| 124 | STRUCTURE FRAME & PANELS :- Outer skin Inner Skin Panel thickness Frame work Material of Drain pan Unit Base Frame 0.6mm Pre- coated Sheet 0.6mm Plain GI 25mm thick injected with 40kg / cum density, CFC free PUF insulation Hollow Extruded aluminum profile 20G SS-304 with 12mm thick chemically cross linked fire retardant Polyethylene foam (XLPE) insulation. Heavy Gauge GI CHILLED WATER COIL :- Make Of Coil Coil Casing Tube Material Tube Dia (inch) Thickness of tube (mm) Header Material Fins Material & Thickness Fins Spacing (FPI) Face velocity across coil Expansion of tubes for perfect bonding of copper tubes with fins Testing Pressure REVO GI Imported special grade copper tube ½” 0.41mm MS Special grade aluminum alloy –sine wave and staggered pattern/0.15mm 11-12 500 FPM Hydraulically 21 kg/sqcm (300psig) pneumatically dipped in water for 2 hours FAN:- Fan Section Fan make With imported DIDW centrifugal Forward Curved Blower Nicotra/ Kruger(AMCA certified) MOTOR:- Motor make Motor Protection Electrical Characteristics Rated efficiency Drive set HAVELLS/BHARAT BIJLEE IP 55 415 V/3 Phase/50 HZ AC Supply IE-2 Taper lock drive set (statically & dynamically balanced) with V-belts FILTER :- Make Of Filters Media of Filters Efficiency of Pre-Filter(EU-4) Type of filter REVO Non-woven Synthetic type supported with wire mesh 90 % down to 10 micron Box type |
| 125 | 6700 CFM AHU |
| 126 | Refrigerant Pipe for VRF/VRV System |
| 127 | Supply, installation, testing and commissioning of interconnecting high pressure copper refrigerant piping work suitable forrefrigerantR410A/R32 duly insulated withclass-O, GC cloth pasted elastomeric nitrile rubber type tubular insulation of density 40 ~60kg/m3 between indoor & out door units. External refrigerant piping shall be laid on 16GGI covered perforated cable trays, it shall include the cost of all the fitting, insulation and all required fittings, joints etc. as per drawings of the following sizes. Piping inside occupiedarea and vertical shaft shall de supported usingGIHangers. The 19mm thick insulation shall be considered for 19.1mm and above dia copper pipe and 13mm thick from 15.9mm dia and below size. All exposed pipe shall have weather proof quoting on GC Cloth and cost to be included in the piping rate and cable tray is quantified separately. Price of Cable Tray will be charged in item of cable tray in electrical part. External piping should be covred with the GI sheet on cable tray for weather protection. |
| 128 | 38.1mm dia (1.2mm thick.) |
| 129 | 22.2mm dia (0.80mm thick.) |
| 130 | Communication and Transmission Cable |
| 131 | Supply,installation,testing and commissioning of3C x 2.5 sqmm copper conducter flexible cable laying in PVCcunduit with bent, tee as require for communication beetween VRV/VRF IDU and ODU and also for Central remote controlling system. |
| 132 | Ceiling Mounted Exhaust Unit |
| 133 | Supply, installtion,Testing and commissioning of ceiling mounted exhaust unit wiith motor complete in all respect & of following capacities. The casing offans Shall be PVC / METALIC and should be lower noise level. The fan shall be suitable for 230V, 1Ph., 50Hz AC power supply, |
| 134 | 75 CFM/ 100 CFM |
| 135 | Air Distribution System |
| 136 | GI Duct |
| 137 | Supply, Febrication & Fixing of 120 GSM GS sheet metal rectangular ducting as per IS 655/SMACNA complete with turning vanes, companion flanges, support, sealing of all seams with a suitable metal sealant as per drawings. |
| 138 | 24 G |
| 139 | 22 G |
| 140 | Duct Thermal Insulation |
| 141 | Supply and Fixing of Duct thermal insulation with following thickness Class-O Nitrile sheet (density 40-60kg/cum)/ XLPE(33±3kg/cum) sheet insulation with factory pasted aluminium foil on one side on the duct using low VOC adhesive. |
| 142 | 13mm thick with aluminium foil if duct passing through airconditioning area. |
| 143 | Auminium Powder Coated SA Diffuser |
| 144 | Supply, Instaaltion, testing and balancing of square shape ceiling diffuserswith VCD in extruded aluminium constuction with powder coated finish complete in all respect as per drawings. |
| 145 | Auminium Powder Coated RA Diffuser |
| 146 | Supply, Instaaltion, testing and balancing of square shape ceiling diffuserswithout VCD in extruded aluminium constuction with powder coated finish complete in all respect as per drawings. |
| 147 | Auminium Powder Coated Grill |
| 148 | Supply , Installtion, testing and balancing of Linear Discreet / Continious Grill extruded aluminium constuction with powder coated finish complete in all respect as per drawings. |
| 149 | Fire Retardent Canvas Connection |
| 150 | Supply, Fixing,testing and commssiooning of 150 mm depth fire retardent canvas connection along with proper nut bolt joint. |
| 151 | Drain Piping |
| 152 | Supply,installation,testing and commissioning of CPVC drain pipes density 20Kg/m3 completewith fittigs like elbows, tees, reducers, bends, flanges, supports with 9 mm thick class - O nitrile rubber insulatiions completewith supports as per drawings and specifications of below sizes. |
| 153 | 40 mm dia |
| 154 | 32 mm dia. |
| 155 | Unforeseen ExpensesItems purchased through vouchers added by 10% on account of contractor"s profit & overhead for the items other than the tender items required under this contract.Note: This is a lump sum amount kept for voucher purchased during contract period. The party need not quote for this item |
| 156 | ELECTRICAL WORKS |
| 157 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. |
| 158 | Group B |
| 159 | Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required. |
| 160 | 3 Module (100mmX75mm) |
| 161 | 6 Module (200mmX75mm) |
| 162 | 12 Module (200mmX150mm) |
| 163 | Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required. |
| 164 | Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A tinned copper bus bar, common neutral link, earth bar,din bar for mounting MCBs (but without MCBs and incomer ) as required . (Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required.) |
| 165 | 12 way (4 + 36), Double door |
| 166 | Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. |
| 167 | Double pole |
| 168 | Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. |
| 169 | 20 mm |
| 170 | 25 mm |
| 171 | 32 mm |
| 172 | Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. |
| 173 | 5/6 A switch |
| 174 | 15/16 A switch |
| 175 | 3 pin 5/6 A socket outlet |
| 176 | 6 pin 15/16 A socket outlet |
| 177 | Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required. |
| 178 | 25 A |
| 179 | Supplying and fixing following rating, four pole, 415 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. |
| 180 | 40 A |
| 181 | 63 A |
| 182 | Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required. |
| 183 | 100 A, 16 KA,TPMCCB |
| 184 | 40 A, 16 KA,TPMCCB |
| 185 | Supply of one number PVC insulated and PVC sheathed / XLPE Armoured Aluminium power cable of 1.1 KV grade of following size |
| 186 | 4 Core , 16Sq.mm |
| 187 | Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required. |
| 188 | Upto 35 sq. mm |
| 189 | Supplying and fixing cable route marker with 10 cm X 10 cm X 5 mm thick G.I. plate with inscription there on, bolted /welded to 35 mm X 35 mm X 6 mm angle iron, 60 cm long and fixing the same in ground as required. |
| 190 | Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. |
| 191 | 4 Core , 16Sq.mm |
| 192 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. |
| 193 | 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire |
| 194 | 2 X 6 sq. mm + 1 X 6 sq. mm earth wire |
| 195 | 4 X 10 sq. mm + 2 X 6 sq. mm earth wire |
| 196 | Non Schedule items :- |
| 197 | Supplying and fixing of Jaquar or equivalent Philips/ Wipro LED wall light fittings complete with Shade, back plate including connection cable,as approved by the Deptt.s etc. as required. |
| 198 | LED Wall Light 17W |
| 199 | Supplying installation testing and commissioning of 1/3" Super HAD Colour CCD, 540 TV LINES, 0.3LUX, 3mm Fixed Lens, Auto Iris, Compact, light weight, DC12V (SAMSUNGor equivalent HONEYWELL/PANASONIC make) |
| 200 | Sypply installation testing commissioning Surface mounted downlighters 12W LED of Phillips make cat no.SM250C LED 12S 6500 PSU WH or equivalent make including connection complete. |
| 201 | Supplying including fitting fixing of high speed 230mm sweep followingA.C. Exhaust fan (Havells make) model "Ventil Air DB " or equivalentin the existing hole on the wall of following sweeps with making necessary connection as approved by the Deptt.)as required complete and as directed by the Department. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
