|
| 1 | Excavation in trenches n exc 1.5m wide and n exc 1.5 m depth and getting out in any type of soil complete all as specified. |
| 2 | Returning filling in incl spreading, leveling in layers n.exc 25 cm in any type of soil complete all as directed |
| 3 | Removing excavated soil n.exc50 mtr and depositing where directed at a level n exc 1.5 m from starting point complete all as directed |
| 4 | Taking down old unsv galvanised water tubing with fittings of following sizes:- |
| 5 | 20mm bore Pipe |
| 6 | 25 mm bore pipe |
| 7 | 40mm bore Pipe |
| 8 | 50mm bore Pipe |
| 9 | 80mm bore Pipe |
| 10 | Re-fixing old GI tubing after threading, cleaning and fix with new fittings to walls and ceiling or laid in floor and trenches complete size:- |
| 11 | 20mm bore Pipe |
| 12 | 25 mm bore pipe |
| 13 | 40mm bore Pipe |
| 14 | 50mm bore Pipe |
| 15 | 80mm bore Pipe |
| 16 | Taking down existing rusted GI tubing and supply & fixing medium grade including cutting, bending and necessary fittings like union, elbow, bend, Tee etc as required at site fix on wall or ceiling or laid under floor or in trench complete all as directed of following sizes :- |
| 17 | 20mm bore Pipe |
| 18 | 25 mm bore pipe |
| 19 | 40mm bore Pipe |
| 20 | 50mm bore Pipe |
| 21 | 80mm bore Pipe |
| 22 | Disconnecting and taking out old unsv gate valve and S& F gun metal globe/ gate valve with iron wheel head screwed both ends of following sizes:- |
| 23 | 20 mm bore pipe |
| 24 | 25 mm bore pipe |
| 25 | 40 mm bore Pipe |
| 26 | 50 mm bore Pipe |
| 27 | 80 mm bore Pipe |
| 28 | Taking down or up and repairing to existing pipe line where leakage occurred incl threading all necessary required fittings and earth work of following sizes:- |
| 29 | 20 mm to 40 mm bore Pipe |
| 30 | 50 mm bore Pipe |
| 31 | 80 mm bore Pipe |
| 32 | Taking down and removing old unsv CI body sluice valve and supply, install, testing and commissioningof cast iron sluice valve 80mm dia, class pin 1.60 ISI marked with both ends flanged with cast irin body and wheel and brass spindle non rising type including necessary jointing material with nuts, bolts, washers and rubber sheet 4mm thick with 2 Nosof 80mm GI flanged for GI pipe complete all as directed. |
| 33 | Supply and fixing MS framed work such as valve pit cover/ sump cover etc made out of angle iron and channelincl provision ofnecessary cutting, welding, drilling etc complete all as directed. |
| 34 | Material and labour for preperation of old iron surfaces of any descriptionand applying two coat of synthetic enamel paints over a coat of zinc chrome priming paints as per existing colour or directed by Engr-in-charge. |
| 35 | Repairing of existing valve pit chamber of any size byre-plastering, finishing & whitewash/paintingof chamber cover and cleaning of surrounding area including removal of unserviceable material from site all as directed. |
| 36 | Material and labour for cutting existing road/hard standing 40 cm wide including necessary excavation and earth work for taking out/laying pipe and making good disturbed surfaces to match with existing complete all as specified and as directed. |
| 37 | Taking up or downCI non return valve removing from site and supply and fixing of new 80mm CI non return valve brass spindle with both ends flanged and drilled incl necessary nut bolts nad washers and rubber gasket sheet 4mm thick with 02 Nos of 80mm GI flanged for GI pipe complete all as directed. |
| 38 | Material & Labour for repalcement of unsv HDPE pipe with 50 mm dia GI medium grade, 6 mtr in length having both the end welded with GI Flanged, duly supported with MS flat iron 25 mm x 6 mm and welded with GI Flange and Pipe for bore well complete all as specifed and directed. |
| 39 | Material & Labour for repair of DG set of cap 18.75 KVA to carry out following works :-Replacement of oil filter, diesel filter,and engine oil, battery 90AH (Exide/Amaron/Luminous) repair of engine by repair/replacment of piston, rings, cylinder, valves etc. and testing after repair all as specified and directed by Engr-in-charge. |
| 40 | Material & Labour for repair of DG set of cap 25 KVA to carried out following works :-Replacement of Oil Filter, Diesel filter, Engine oil, battery 90AH (Exide/Amaron/Luminous) andSupply & fixing of Battery charger and testing after repair all as spd and directed by Engr-in-charge. |
| 41 | Material & Labour for repair of DG set of cap 20 KVA to carry out following works:-Replacement of oil filter, diesel filter, battery 90AH (Exide/Amaron/Luminous) and engine oil, repair of engine by repair/replacment of piston, rings, cylinder, valves etc. and testing after repair all as specified and directed by Engr-in-charge. |
| 42 | Repair of DG set of cap 15 KVA to carried out following works :-Replacement of oil filter, diesel filter, engine oil, battery 90AHof (Exide/Amron/Luminos) andSupply & fixing of battery charger and testing after repair all as spd and directed by Engr-in-charge. |
| 43 | Material & Labour for fixing of automatic phase sequence corrector for Pump House complete all as specified and directed by Engr-in-Charge. |
| 44 | Material & Labour for fixing of 3 phase motor protection device to protect motor/pump of Pump House complete all as spd and directed by Engr-in-Charge. |
| 45 | Demolition of cement concrete (unreinforced) in ground floor and pavings not exceeding 15cm thickness below or above ground level andremovingmaterial from site ofm workas directed by the Engr-in-Charge. |
| 46 | Material & labour for PCC 1:4:8 type D2 (using 40 mm graded stone aggregate) as in sub base/mass concrete and finished the top surface even and fair complete all as specified. |
| 47 | Material and Labour for machine pressed precast concrete interlocking coloured paver block rubberisedany shape & size conforming to IS- 15658 - 2006 of 60 mm thickness M-35 Grade with grey cement & pigment and with and including 25 mm thick river sand cushoining etc. complete all as specified. |
| 48 | Material and Labour for machine pressed precast concrete interlocking coloured paver block rubberisedany shape & size conforming to IS- 15658 - 2006 of 40 mm thickness M-30 Grade with grey cement & pigment with and including 25 mm thick river sand cushoining etc. complete all as specified. |
| 49 | Material and Labour for 50 mm thick Cement concrete 1:3:6, type C-1 (using 20mm graded stone aggregate) as in plinth protection with fair finished surface complete. Note : Joints 12mm wide to the full depth of PCC shall be provided at every 3 meters and at every change of direction and shall be filled with mixture of bitumen and sand 1:3 by weight. Cost of this provision shall be deemed to be included in the quoted rate for concrete in plinth protection. |
