|
| 1 | Earth work excavation for foundation in Hard stiff clay, stiff black cotton, hard red earth, shales murram, gravel, stoney earth and earth mixed with small size boulders SS 20B and Sand, silt or other loose soil, wet sand, silt not under water, light black cotton soil, sandy loam ordinary soil and to full depth as may be directed except in hardrock requiring blasting inclusive of shoring shuttering and baling out water wherever necessary refilling the sides of foundation with excavated soil other than sand in layers of 15cm thick well rammed and completed, cleaning and levelling the site etc., complete - Footings- First Depth Upto 2.00M . For Foundation upto 2.00M - Footing |
| 2 | Plinth Beam |
| 3 | Supplying and filling in foundation andbasement with filling sand in layers of not more than 15cm.thick well rammed watered and compacted - etc., complete complying with standard specification. |
| 4 | Plain Cement concrete 1:4:8 (one cement, four sand, eight aggregate) using 40mm gauge handbroken granitestone jelly for foundation including dewatering if foundnecessary and laid in layers of not more than 15cmthick and compacted,etc., complete complying withstandard specfication. |
| 5 | Supplying and erecting steel centering including necessary supports for plane surfaces for Reinforced Cement Concrete works such as column footings, column pedestals, plinth beams, grade beams, staircase steps, etc. which require only nominal strutting using mild steel sheets of size 90cm x 60cm and 10 BG stiffened with welded mild steel angles of size 25mm x 25mm x 3 mm for boarding, laid over silver oakjoists of size 10cm x 6.5cm spaced at about 75cm centre to centre or at suitable intervals etc. complete in all floors complying with standard specifcationFooting,Pedestal, Grade beam & RCC Belt |
| 6 | Ground floor & First Floor RCC Column |
| 7 | Ground floor & First Floor RCC Lintel,RCC Roof Beam& RCC Slab |
| 8 | Providing and laying in position Standardised Concrete Mix M-25 Grade in accordance with IS 456 - 2000 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement contenet of 325Kg/ cum and maximum water cement ratio of 0.55 including admixture (Plasticiser / super plasticiser) in recommended proportions as per IS 9103 to accelerate, related setting of concrete, improve workability without imparing strength and durability with about (5.0cum), 7730Kg of 20mm machine crushed stone jelly and with about (3.3 cum), 5156kg of 10 - 12mm machine crushed stone jelly and with about (4.79cum) 7670 kg of sand, but excluding cost of reinforcement grill and fabricating charges centering and shuttering but including laying, vibrating with mechanical vibrators, finishing, curing, etc and providing fixtures like fan clamps in the RCC floor / roof slabs wherever necessary without claiming extra cost etc., complete complying with standard specification and as directed by the departmental officers - The Coarse and Fine aggregates to be used should comply with the requiremnents of IS staandards. (No separate payment will be made by the Department for the excess usage of materials) Below Basement Level- Footing, pedestal,Grade Beam & RCC Belt. |
| 9 | For Ground floor -RCC Lintel,RCC Roof Beam, RCC Loft, RCC Column & RCC Roof slab |
| 10 | For first floor -RCC Lintel,RCC Roof beam,RCC Loft,RCC Colun &RCC Roof |
| 11 | Suppling and fabricating and placing in position MS(or) R.T.S. bar for reinforcement to all RCC works as per the design given including cost ofsteel and binding wire also in all floors as per standard specification. |
| 12 | Supplying and filling the basement with Goodwell gravel filling in layers of not more than 15cmthick well rammed watered and compacted - etc., complete complying with standard specification. |
| 13 | Brick work in CM 1:5 (one cement & Five sand) using II class ground moulded bricks of size 9\"X43/8\"X 23/4\" standard specification including finishing, curing, etc., complete complying with standard specification (Masonry projections wherever necessary for obtaining required elevation shall be done without extra cost)- Upto Basement |
| 14 | Brick work in CM 1:5 (one cement & Five sand) using II class ground moulded bricks of size 9\"X43/8\"X 23/4\" standard specification including finishing, curing, etc., complete complying with standard specification (Masonry projections wherever necessary for obtaining required elevation shall be done without extra cost)- Ground Floor |
| 15 | Brick work in CM 1:5 (one cement & Five sand) using II class ground moulded bricks of size 9\"X43/8\"X 23/4\" standard specification including finishing, curing, etc., complete complying with standard specification (Masonry projections wherever necessary for obtaining required elevation shall be done without extra cost)-FirstFloor |
| 16 | Brick Partition Walls using III class ground moulded country bricks of size 8.75\"X4.25 \" X 2 3/4\" in C.M 1:3using hoop iron reinforcement,if found necessary standard specification including finishing, curing,etc., complete complying with standard specification - 10 sqm |
| 17 | Plastering with cement mortar 1:5 (One cement and five sand) 12mm thick in all floors including cost and conveyance of all materials to site etc,complete as per standard specifications |
| 18 | ceiling plastering in all floors and finishing the exposed surface of RCC items of work such as slab, beam, sunshade, facia, canopy slab, staircase waist slab, landing slab etc., with cement mortar 1:3 (One cement and three sand) 10mm thick including hacking the surfaces and providing cement mortar nosing, beading for sunshade, staircase, step, landing slab etc., including neat finishing and curing etc., complete complying with standard specification and as directed by the departmental officers |
| 19 | Providing and fixingI Class Teak Wooden Frame & Shutter (Pannels) as per the drawing for Door, windows & ventilators with necessary fixtures and accessories approved by the Architect and client & other sections of approved make confirming to IS fixed with rawl plugs & screws or with fixing clips including necessary filling up of gaps at junctions, at top, bottom & sides, with 4mm glass, all complete as per architectural drawings & directions of Engineer- in-Charge at all levels.(glazing & panelling to be added in the rate). Cost Including spray painting,etc. |
| 20 | Supply and fixing of SS false ceiling(SOR 2023-2024 P.72 .M-0689 . |
| 21 | Dadooing walls withGlazed tiles of sizes 305mm X200mm X 6mm size of approved make and quality and colour Set in cement mortar 1:2 (one cement, two sand) over 10mm base layer plastering and pointing with white cement neatly as directed etc., complete as per standard specification |
| 22 | Paving the floor with design Antiskid ceramic tiles (colour and shade as directed) of size 305 mm x 305mm x 6 mm in all floors over a base layer of cement mortar 1:3 (one cement and three sand ) 20mm thick laid in-situ and pointed with same coloured cement etc, complete as per standard specification. |
| 23 | Paving the floor with Vitrified Marbonite tiles of stain free nano polish approved quality and colour of size 600x600x8mm thick of approved make, quality and colour in all floors over a base layer of cement mortar 1:3(one cement three sand) 20mm thick and laid straight alignment and pointed neatly with colour cement at the rate of 0.40kg/m2 laid without any air gap in the tiles neatly and fixing in position as per standard specifications and as directed by the departmental officer.The colour & quality of tiles should be got approved by Municipal Engineer before use on workion. |
| 24 | Painting two coats with ready mixed Plastic Emulsion Paint approved quality and colour over a priming coat, including thorough scrapping, clean removal of dirt, etc complete and including necessary plaster of paris, putty, wherever required etc, complete as per standard specification. - 10 sq.m |
| 25 | Supply and fixing of M.S Grills with Doors and Windows with one coat of Red oxide with Primer including all costs such as welding, grinding and fabrication charges, cost and conveyance of all materials to site etc,complete as per standard specification. |
| 26 | Manufacturing, Supplying and Fixing of Stainless Steel Hand rails for staircase using 50mm dia 304L Grade Stainless Steel pipe of 1.60mm thick at required locations to a height of 900mm from finished floor level welded to 38mm dia Stainless Steel pipe post of 1.00mm thick as vertical at 900mm centre with 2 Nos. of 25mm dia intermediate horizontal stainless steel pipe of 1.60mm thick in between. The vertical pipe has to be welded to the 100 X 100 X 6mm MS base plate encased in the base concrete. The rate is inclusive of the charges for cutting, bending, welding, grinding, polishing, conveyance, electrical charges, etc. complete |
| 27 | Weathering Course with Concrete Broken Brick (S.I.No.278) & ( P & D) Data 54.Jelly 20mm gauge in pure slaked lime (no sand to be added) over roof slab,the proportion of brick jelly to lime being \"32 to 12.5 well beated with wooden beaters for giving required slope and thickness as directed by the departmental officers.etc., complete as per standard specification. |
| 28 | Finishing the top of roof with one course of machine pressed tiles of size 200 mm x 200 mm x 20 mm of approved quality in Cement Mortar 1:3 (One Cement add three sand) 12 mm thick mixed with water proofing compound conforming to ISS at 2% by weight of cement used and the joints pointed neatly to full depth of tiles with the same cement mortar mixed with red oxide and water proofing compound including curing etc., complete as per standard specification. |
| 29 | Painting two coats with Ready Mixed Enamel Paint over the new iron works of approved quality and colour without priming coatincluding the cost all materials etc.,complete, in all floors. |
| 30 | Supply and fixing of Stainless steel (Salem stainless steel) Door frame ( Box section using stainless steel plate of 1.6mm thick) of size 100mm X 60mm with a rebate of 30 / 35mm X 15mm on one side of the frame including supplying and fixing dovetail splayed end stainless steel holdfast etc. |
| 31 | Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Windows of casement type (open) from the profile the size of outer frame 60mm x 58mm and shutter profile are reinforcement with GI/1mm 25GSM and 100% corrosion free, the profiles are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with over all the edges of frame and shutter the shutter will be provided with spag multi power point locks and also it operates as handle. The corners and joints should be welded and cleaned. Radiations free pin headed plain or brown olour glass 4mm thick should be provided to the shutter and it should not allow leakage of water even at most ranging storms and should have key lockable action, security protective hinges, strong locking systems and as per size for arresting noise and energy loss. The connecting mechanism between sash and outer frame that enables opening of the window. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The window should be got approved from the executive Engineer before use on work |
| 32 | Supplying and fixing UPVC (Un-Plasticized PolyvinylChloride) Louvered Ventilators of from the profile the size of outer frame 60mm x 58mm and shutter profile size of 60 x 78mm both profiles are reinforced with GI/1mm 125GSM and 100% corrosion free, the profile are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with all over the edges of frame and shutter. The corners and joints should be welded and cleaned. Radiations pin headed glass 4mm thick should be provided in the louvers. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The ventilator should be got approved from the Executive Engineer before use on work |
| 33 | Supplying, fabricating, erecting structural steel work for roofing welded or bolted type using MS channels, angles, plates and round bars etc. conforming to IS specification including primer coating and enamal painting as per Design given by the departmental officers etc, complete as per standard specification |
| 34 | Internal Wall Painting : Providing and applying 3 coats of Asia Paint Royal Premium Emulsion Paint to internal walls over primer and 2 coat putty at all levels and heights to give an even shade including scaffolding, curing, etc. all materials and labour complete in all respects and as directed by the Engineer |
| 35 | Fabricating supplying and fixing of pre painted galvanized iron sheets with the following specification. The materials should be of PPGI tile profile with a red colour or any other approved design 0.47 mm thick 24 guage having width 1050 mm. The sheet should be G.I.base pre painted hot dipped galvanized iron sheet and to be fixed with shelf tapping screws,plastic washer.The washer and screws to be fixed by using minute power machine drilled with out damaging the sheets paint coating to be regular modified polyster coat with zinc coating of Z 120 GSM paint thickness the finish should be terra cotta finish like malabar mangalore tiles finish optional matt finish. The sheet to be fixed with making suitable corrugated,cutting the sheet in to the required ssize and making ornamental designs as per the site condition and as directed by the departmental officers. |
| 36 | Plain Cement Concrete 1:2:4 (one cement, two Crushed Stone Sand (M- Sand) and four coarse aggregates) using 20mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour chargesetc., complete as per standard specification |
| 37 | Providing and laying, spreading and compacting graded stone aggregate to wet mix macadam (WMM) specification including premixing the material with water at OMC in mechanical mix plant carriage to mixed material by tipper to site laying in uniform layers with paver in sub base / base course on well prepared surface and compacting with vibratory roller to achive the desired density complete as per clasue 406 of MORTH specifications. |
| 38 | Supplying and laying Rubberised interlocking Paver blockM40 grade Providing and laying of83mmthick high strength type conforming IS 15658-2006 of rubberized interlocking paver lock in size of minimum compressive strength of 40N/mm2 in uniform shape of approved make to be laid in flurring bone pattern with stone dust cushion below the uniform shap of approvednon skitting surface in the top and the rate including levelling the base preparation ofpavers as sub base, Stone Dust cushion 150mm thick layingout of pavement cut the pieces to fix the edge vibring the pavers,sweeping tranporting loading unloading of laying paver block as per standard specification,. |
| 39 | Supplying and fixing in European Water Closet (white ) with \"P\" or \"S\" Trap with Double Flapped seat and seat cover with Brass Highes and 10 litre capacity PVC low level flusing tank with all internal fittings & accessories etc.. |
| 40 | Supplying and fixing of position of Indian make whiteglazed earth were wash basin 550mm x 400mm with all accessories such as cost Iron brackets, 32mm dia C.P. Waste coupling, Rubber plug and chain, 32mm dia \"B\" class, G.I. Waste pipe, 15mm dia, G.M.Wheel valve, 15mm dia Nylon connection, 15mm dia Brass Nipples, 15mm C.P. pillar tap etc., |
| 41 | Supply and fixing in position ofbrass chromium plated screw down Tap 15 / 12mm Dia (Heavy Type) with necessary accessories, , etc.complete complying with standard specifications and as directed by the departmental officers. |
| 42 | Supply and fixing in position ofchromium plated stop cock 15mm Diawith necessary accessories, , etc.complete complying with standard specifications and as directed by the departmental officers. |
| 43 | Supply and fixing in position of Porcelain soap dish of size 150mm x 150mm x 50mmwith necessary TW plugs, clamps, screws, etc.complete complying with standard specifications and as directed by the departmental officers. |
| 44 | Supply and fixing in position of brass chromium plated towel rail 60cm long and 20mm dia with Brackets with necessary TW plugs, clamps, screws, etc.complete complying with standard specifications and as directed by the departmental officers.( |
| 45 | Supply and fixing in position ofPVC / Fibre Glass framed 5.5mm thick mirror, shelf type with Hard Board Backing with necessary TW plugs, clamps, screws, etc.complete complying with standard specifications and as directed by the departmental officers. |
| 46 | Supply and fixing in position of Stone ware gully trap of size 150mm x 100mm with cast Iron Double Gratings with necessary accessories, , etc.complete complying with standard specifications and as directed by the departmental officers. |
| 47 | Supply and fixing in position of Cast Iron Nahini / Floor Trap with stainless Steel Gratingwith necessary accessories, , etc.complete complying with standard specifications and as directed by the departmental officers. |
| 48 | Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc. 40 mm pipe 6Kgf/cm2 |
| 49 | Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc. 50 mm pipe 6 kgf/cm2 |
| 50 | Supplying and laying the following dia un plasticized PVC pipes 6KSC & 10 KSCconfirming to IS 4985/2000 and relevant specials including packing the joints with rubber /lubricant fixing ,holding wherever necessary and making good of the dismantled portion with necessary connectionsetc., complete as directed by engineer in charge. 75 mm dia |
| 51 | 110 mm dia |
| 52 | Supply and fixing under ground sump and over head tank Coverwith necessary accessories, , etc.complete complying with standard specifications and as directed by the departmental officers. Manhole Cover Size 900x900 mm double seal, air tight, non-slip SFRC cover & frame for manhole |
| 53 | Manhole Cover Size 60 cm x 60 cm(heavy duty) with frame - SFRC |
| 54 | Manhole Cover Size 1000 mm circle type double seal, air tight, non-slipFRP manhole cover with frame |
| 55 | Supply and fixing of Precast RCC(M30) Bio septic tank of 2.25KLD consists of three chambers - sedimentation chamber,Bioprocessing chambe with PP flower media(virgin plastics bio balls) & settling chamber which shall be coated inside and outside of tank with PU paint for extended life of tank up to 25 years. 2nos of manholes of 500mm shall be provided for easy and safety service. Bio-enzyme shall be used which consists of 20 different types of enzymes and bacteria which can develop in both aerobic and anaerobic conditions and this will start to reduce the BOD and COD of the sewagewater and the water will loses its hardness during this process and neutralizes the PH between 6.6 to 7.5. The settled sludge shall be self-digestive. Treated water is orderless and colorless and shall be discharged to Garden/Choke pit/connected to existing sewer line. (Q) |
| 56 | Providing Geophysical survey incuding all and conveyance,etc., complete |
| 57 | Drilling ofBorewell 150 mm diainSedimentary formationand hard rock area including labour charges for inserting of casing pipesand supplying and packing of pebbles etc., complete |
| 58 | Supply and delivery of 150 mm dia PVC Plain casing pipe etc., complete.as per standard specification |
| 59 | Supply and fixing of 1000 lit HDPE Tank ISI make with all accessories such as Tank Nipple, Washer etc,including cost and conveyance of all materials to site etc, complete as per standard specifications. |
| 60 | Supplying and erecting in position of following liters capacityIndustrial Model Reverse Osmosis Water-cum-Purifier todeliver Potable Water with World Health Organisation (WHO)Standards with following accessories.(a) MS Skid - 1 No.(b) Media 11054 No. Vessel with 20 nb Multiport Valve (withMedia Pubble and Fine Sand and Activated Carbon Filling) set(c) Feed Pump 0.50 HP – 1 No.(d) Vertical Pump 2-9, 2.00 HP / Single Phase – 1 No.(e) Membrane 40 x 40 filmtech (or) equilaents / Osmonic(USA) - 1 No. and Membrane Pressure Vessel 40 x 40 -1 No.& Pressure Gauge - 2 Nos.(f) Flow Meter - 1 No. 20” Filter with Housing - 1 No., LowPressure Switch - 1 No., Level Switch - 1 No. & NecessaryCPVC Pipes and Fittings.The system shall be provide with Two Panel Control Systemwith necessary Stainless Valves and Fittings and Float Controletc. The rate should be inclusive of all civil works, wherevernecessary to install the System in position and intact.Data For PWD Rate - 2023-2024 S. No:295 250 Litter |
| 61 | Supply and Delivery ofPVC INSULATED AND SHEATHED 3 CORE FLAT TYPE COPPER CABLE CONFORMING TO IS 694/1990 AND AS AMENDED THEREAFTER 4 sqm 3 core copper cable |
| 62 | Supply of following GI pipes and PVC Special etc.,complete125LpmX25m head submercible pump set of ISI make |
| 63 | 2.00 Hp Submercible Three Phasepannel board |
| 64 | MS Koosk box |
| 65 | 2.5 sqm 3 core copper cable |
| 66 | 40 mm dia HDPEHose pipe(4Kg/sqm) |
| 67 | 32 mmdia GI hex nipple |
| 68 | 32 mm GI pipe |
| 69 | 32 mmdia GM NRV |
| 70 | 32 mmdia GI union |
| 71 | 12 mmdia nylon rope |
| 72 | Bore cover |
| 73 | 32 mm diakitty set |
| 74 | Bore stand |
| 75 | 32 mm x 20 mm diaGI reducer |
| 76 | 20 mm diax 0.20 m G I pipe nipple |
| 77 | 20 mmdia GI coupling |
| 78 | 32mm dia GI Coupling |
| 79 | 32 mm dia PVC pipe(10Kg/sqm) |
| 80 | 32 mm dia PVC tee |
| 81 | 32 mm fuse carrier |
| 82 | 32 A mainSwitch |
| 83 | 32mm diax 0.20 mG I pipe nipple |
| 84 | 40mm dia PVC pipe |
| 85 | 40mm dia PVC Coupler |
| 86 | 40mm dia PVC Elbow |
| 87 | 40mm dia PVC Tee |
| 88 | Supply, installation testing and commissioning of 3Ph EB Service panel & all necessary protection as per TNEB standard, including all fuse unit, EB meter shall be suitable for utilizing excess power from Solar panel, 40A DP MCB - 1 No, 32A DP MCB-2 Nos. As per quatation |
| 89 | Supply, excavation, laying, connection, testing and commissioning of 4C x 50sqmm Al.Ar.Cable from EB pillar to Metering panel. As per quatation |
| 90 | Earthing with G.I. earth pipe 3 meter long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required. SD 233 |
| 91 | Supply and installation of sheet steel, phosphatised and painted, dust and vermin proof enclosure of single phase, 8 way - double cover (IP 42/43) MCB DB including copper /brass bus bar, neutral link, earth bus and DIN rail suitable for fixing MCB/ isolator etc, 40A DP MCB-1 No & 40A DP RCCB-1No, 6/10/16 SPMCB-12 Nos, fixed on wall using suitable anchor bolts or fixed in recess including cutting hole on the wall , making good the damages, colour washing etc. as required. |
| 92 | Supply, installation testing and commissioning of Online 5 KVA Hybrid inverter with 1 hours battery backup, solar panel for 2 KW, suitable to connect with grid to transfer excesss power, 1 phase, 230 V single phase output,necessary protection, 40A incoming & outgoing MCB control, all connections, Junction Boxes, solar panel mounting supports, Inverter stand& all nessorary accessories. |
| 93 | Supply, conveyance, installation, testing and commissioning of 1200mm sweep -5star rated ceiling fan complete with 300mm down rod , canopies, shackles and blades and resistance type regulator working on 230V/240V single phase A/C, using standard accessories , wiring the down rod with 16/0.20mm PVC insulated and PVC sheathed 650/1100V grade 3 core round copper conductor flex wire or with extended original wiring etc. as required. |
| 94 | Supply and fixing of 300 mm (12\") sweep (light duty) 1400 RPM, AC exhaust fan complete without provision of holes in the wall |
| 95 | Wiring with 2 x 4sqmm (56 /0.3 ) PVC insulated single core unsheathed copper conductor cable of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories inflush with wall with 150 x 100 x 113 mm TW switch box with 3mm hylum sheet cover for15A 3 pin non inter locking CS plug with continuous earth wire connection of 14 SWG TC wire and making good of the concealed portion with suitable colour for concealed PVC power plug point. |
| 96 | Supplying and laying of PVC insulated, PVC sheathed, armoured, LTUG cable of size 2 core 10 sqmm Al.cable clamped on walls |
| 97 | Supplying and fixng of cable gland and termination with earth connection of size 2 core 10 sqmm etc, complete as per standard specification. |
| 98 | Supply and fixing of TNEB Board suitable for 3 Phases 63A service connection made up of suitable angle iron frame work of size 2 feet x 1 1/2 feet using angle iron of size 1 1/2\" x 1 1/2\" x 1/4\" rigidly fixed on wall covered with hylem sheet of size 2 feet x 1/2 feet of 6mm thickness with necessary bolts and nuts supports and supply and fixing of 3 Nos 63A fuse units(500V) 1 No. Neutral link, copper earth flat of size 1\" x 1/4\" with inter connection of EB meter to fuse units by 7/16 PVC insulated copper wire with earth connection complete.SD 129 |
| 99 | Supply and fixing of 32 A TPN MC switch on incoming and 3 Nos 32 A DPMC Switch (Front Handle) as outgoing with suitable adoptor box with suitable MS cable entry box trunking boxes and internal connections on internal connections on suitable AI frame work with earth connection etc,complete. |
| 100 | Supply and fixing of 3 phase 4 wire 4 way ICDB of 16 A per way with 32 A TPN MC switch with suitable MS cable entry boxes trunking box and internal connections on suitable angle iron frame work with PWD earthing etc,complete. |
| 101 | Earthing as per the ISI specification with an earth electrode of 2.1mt class \"B\" GI pipe of dia not less than 40mm, with copper earth plate of size 125mm x 50mm x 6mm, with necessary funneling arrangements with necessary masonry work and with 38mm RCC cover slab for the brick masonry . |
| 102 | Supply and run of 2 of 4sqmm (56/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V Grade in suitable PVC rigid pipe concealed in wall and ceiling with continuous earth wire connection of 14SWG Cuwireand making good of the concealed portion with suitable colour |
| 103 | Supplying and Laying of 3½ x 50 sq.mm PVC armoured LTUG cable in a trench to be excavated at a depth of 0.75 M putting 0.15 M layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good. |
| 104 | Supplying of 4 x 10 sq.mm PVC armoured LTUG cable in a trench to be excavated at a depth of 0.75 M putting 0.15 M layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good. |
| 105 | Conveyance, installation, testing and commissioning of decorative type, 4mtr length, pre-wiredhanging type 60 watts LED Tube Light complete with all accessories etc. directly on ceiling using 2 nos hanging rope of length 60 cm properly hooked to steel hooks anchored to the ceiling and giving connections with required length of 16/0.20mm 3 core copper conductor flex wire conforming to relevant ISS or extending the original wiring and giving connection etc. as required. |
| 106 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 2Nos x 3 pin 5/6 amps modular socket outlet and 5/6 amps modular switch, connection etc. as required. (For light plugs to be used in non residential buildings). |
| 107 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 1Nos x 3 pin 5/6 amps modular socket outlet and 5/6 amps modular switch, connection etc. as required. (For light plugs to be used in non residential buildings). |
| 108 | Wiring with 2 x 1.5 sqmm (22 /0.3 ) PVC insulated single core unsheathed copper conductor cable of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories inflush with wall with 3mm thick hylum sheet cover with TW switch box and 5A F.T. switch with continuous earth wire connection of 14 SWG TC wire for making good of the concealed portion with suitable colour for PVC concealed light point / Fan point (For Electronic regulator). |
| 109 | Wiring with 2 x 1.5 sqmm (22 /0.3 ) PVC insulated single core unsheathed copper conductor cable of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories inflush with wall with 150 x 100 x 113 mm TW switch box with 3mm hylum sheet cover for5A 3 pin non inter locking CS plug with continuous earth wire connection of 14 SWG TC wire and making good of the concealed portion with suitable colour for concealed PVC plug point. |
| 110 | SUPPLY & INSTALLATION OF AIR-CONDITIONER WITH COPPER COIL 1.5 TR Split Type AC Unit - 5 Star Rated |
| 111 | R.C.C.Jolly by a new of followingsize in R.C.C. 1:1.5:3 using 20mm gauge hard broken granite stone jelly and river sand excluding cost of reinforcement but includingcharges,fabrication chargescuring neat finishing and labour charges for fixing the jolly in position with standard spefication |
| 112 | Brick work for seating - Construct 115mm thick brick wall of with standard wire cut bricks and use CM 1:3 (one cement & Six sand), size of 9\"x 4 3/8 \" 2 3/4\" including finishing, curing, etc., complete and fill with approved coarse rubbles for filling. |
| 113 | Brick work for seating - Construct 230mm thick circular brick wall of with standard wire cut bricks and use CM 1:5 (one cement & Six sand), size of 9\"x 4 3/8 \" 2 3/4\" including finishing, curing, etc., complete and fill with approved coarse rubbles for filling. |
| 114 | Counter top - Providing and fixing of 2 inch thick natural stone Kadappa equivalent to the prescribed size and shape with cement Grout 1:6 as instrcuted by site engineer |
| 115 | Seating area - Providing and fixing of 1 inch thick natural stone Kadappa equivalent to the prescribed size and shape with cement Grout 1:6 as instrcuted by site engineer |
| 116 | Supply and delivery of HIGH BACK CHAIR with Executive ergonomic mesh chair with headrest in Black, 700mmAluminum base, Adjustable lumbar for excellent back support, Height adjustable back with 5 separate positions,Adjustable tension control, Dual pivot mechanism, Multi-functional 3D adjustable arms, Full diamond mesh, Extralarge executive headrest, Heavy duty SHS gas lift, Waterfall seat, Maximum Weight limit - 150kg, Suitable for 2 |
| 117 | Supply and delivery of OFFICE CHAIR with Deluxe Mesh chair with folding Arms, Breathable Mesh Back, Air Flow Mesh Seat, Tilt Mechanism lockable in the upright position, Folding Arms, Heavy duty gas lift (110 kilos), Foam and Fabric conform to BS5852 UK FR, W690 x D755 x H960 - 1060mm etc., complete |
| 118 | Supply and delivery of STUDY CHAIR / CLASS ROOMCHAIR with Seat Material –Fabric, Back Type - Mid BackArm Type – Fixed, Arm Warranty - 1 Year, Brand - MBMSeating Height - 20 - 21 Inches, Color – Black, HeightAdjustable – Yes, Seat Height Adjustable – Yes etc., |
| 119 | Supply and delivery of COMPUTER CHAIR with Low backchair with arms and plastic outer cover, PrimaryMaterial – Castors, Chair base, Gas lifter, chair arm,Press wood sheet, Plastic outer cover, Style – Modern |
| 120 | Supply and delivery of CHILDEREN’S CHAIR withLightweight and easy to move, About $15 in materials tobuild each chair, Easy to build plan designed for a novicewoodworker, Uses basic tools, Classic style can isbeautiful painted or stained, Storage compartment isbig enough for notebooks and more, Works withstandard children\"s tables, Measurement - 0.42m |
| 121 | Supply and delivery of CLASS ROOM CHAIR with Seat Material –Fabric, Back Type - Mid BackArm Type – Fixed, Arm Warranty - 1 Year, Brand - MBMSeating Height - 20 - 21 Inches, Color – Black, Height Adjustable – Yes, Seat Height Adjustable – Yes etc |
| 122 | Supplying and fixing of Conference Hall - Half RoundTable to site, by using of MDF (Medium Density Fiber)panel sheets for 15 nos of seating capacity, the costincluding of material charges, required hinges at bottomsupport, nails, screws for joints and finish the top withMica sheet, also including making and labour chargescomplete. (Total length(straight table) = 4.85m,Curveportion table length = 2.45m,Straight portion Tablewidth = 0.70m,Curveature portion Table width = 0.90m)Note : Reading table may also be provided as studytable on theatre type having 8 to 10 seats on either sideof the table in rows to accommodate 30 seats for |
| 123 | Supplying and fixing of System table with Key BoardRack to site, by using of MDF (Medium Density Fiber)panel sheets, the cost including of material charges,making charges ,Required hinges at bottom support,nails, screws for joints and labour complete. Atcomputer Zone area tables based on number ofcomputers.(Measurements for Computer tables, Foreach system cabin Length =0.90m,Width = 0.60m,Heightof table top from ground = 0.76m,Cabin |
| 124 | Supplying and fixing of Study Table with Cabin to site,Each cabin length = 0.90m,width = 0.60m, Height oftable top from ground = 0.77m ,Cabin partition heightfrom table top = 0.43m the cost including of all materialcharges, making charges, Required hinges at bottomsupport, nails, screws for joints and labour etc.,complete |
| 125 | Supplying and fixing of Reception table with Fittings tosite, by using of MDF (Medium Density Fiber) panelsheets, the table with the size of 2.20m x 0.60m andHeight = 0.90m with Required trays and draws andComputer spaces as per site conditions. The costincluding of material charges, |
| 126 | Supplying and fixing of Librarian table with Fittings tosite, by using of MDF (Medium Density Fiber) panelsheets, the table with the size of 2.20m x 0.60m andHeight = 0.90m with Required trays and draws andComputer spaces as per site conditions. The costincluding of material charges, making charges andlabour etc., complete |
| 127 | Supplying and fixing of Manager Room Table to site, byusing of MDF (Medium Density Fiber) panel sheetssystem fittings and keyboard section with the over alltable size of 2.20m x 1.10m with Height = 0.77m to sitewith required trays and Draws at both sides, the costincluding of material charges |
| 128 | Supplying and fixing of Paper Display to site, By using ofMDF (Medium Density Fiber) panel sheets the displayfurniture table size of 2.50 x 0.45m and Height = 1.23mwith Magazine Bay opening Each = 0.25m at both sides,the cost including of material charges, making chargesand labour etc., |
| 129 | Supplying and fixing of Book racks at Ramp side : (4.16mx 2.56m =9.81Sqm) to site, By using of MDF (MediumDensity Fiber) panel sheets the cost including ofmaterial charges, |
| 130 | Supplying and fixing of Book racks at Ramp side of size3.86m x 1.67m = 6.44 Sq.m, by using of MDF (MediumDensity Fiber) panel sheets the cost including ofmaterial charges, making charges and labour etc.,complete. |
| 131 | Supplying and fixing of Book self size 2.45m x 2.22m X2.22m, by using of MDF (Medium Density Fiber) panelsheets the cost including of material charges, makingcharges and labour etc., complete. |
| 132 | Supplying and fixing of Children\"s Table to site for inbottom of OTS area, By using of MDF (Medium DensityFiber) panel sheet and also the table top should befinished with mica sheet of variant colour as per theinstruction of Departmental officers, the over all tablesize of 1.00m x 1.00m to site With Height = 0.55m withseating capacity of 5nos (per each table) the costincluding of material charges, making charges andlabour etc |
| 133 | Providing rain water harvesting using 3 nos.of RCC well rings of 90cm inner dia (clear) with 5cm wall thickness made out of cement concrete 1:2:4 using 20mm hard broken jelly to a height of 30cm each supplying and fabricating 16 nos. of 6mm dia MS rod vertically and 3 nos. of 6mm dia MS rod circumferentially tied together with 18 guage binding wire for well rings including necessary earth work excavation 1m dia toa depth of 1m, supplying and filling 40mm HBG inside the erected well ring to a depth of 90cm, and top covered with RCC circular perforated cover slab of 1m dia and 5cm thick which inclusive of cost and fabrication of 6mm M.S reinforcement at 15 cm spacings on both directions and one 6mm M.S rod ties at the edge of the slab circumferentially including cost of moulding, curing, finishing and well placing in position and disposing off excavated earth with all initial leads and lifts in places as shown by the Departmneal officers etc., complete in all respects. |
| 134 | Supply errection and commisioning of 40KV Genset of diesel capacity 50liter and automatic type of ISI Make including cost of concrete bed , errection and all other cost and conveyance etc complete. |
| 135 | Supply anrrection of Fire Shield brand\" Stored Pressure Fire Extinguisher ISI Marked, Powder type Fire 6 Kg. Capacity |
| 136 | ADD GST 18% |
