|
| 1 | Earth work in excavation of foundation in all kinds of soil including hard moorum, stoney earth, earth mixed with boulders (except sheet rock and boulders requiring blasting) with all leads and lifts for guard wall including dressing & levelling the bed and depositing the excavated earth at places away from work site with all leads and lifts including cost of all labour T&P required for the work etc. complete and as directed by the Engineer-in-charge. |
| 2 | Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with approved material. |
| 3 | Filling in foundation trenches and plinth with good river sand well watered and rammed in layers not eceeding 23cm. In depth with all leads and lifts including cost, conveyance, royalties and taxes of all materials, cost of all albour, sundries, T&P required for the work etc. complete in all respect as directed by the Engineer-in-charge. |
| 4 | Cement concrete of proportion (1:3:6) in foundation and floors using 4cm (3/2\") size clean black broken granite metal of approved quality from approved quarry including hoisting, lowering and laying in layers not excedding 15cm. (6\") thick to the required level, ramming, watering, curring including frame work etc. complete including cost, conveyance, royalties and taxes of all materials and labour with T&P required for the work etc. complete as directed by the Engineer-in-charge. (Without frame work) |
| 5 | Plain Cement Concrete (1:2:4) using 6mm to 18mm (1/4\" to 3/4\") size (18mm not to exceed 25%) hard black broken granite chips of approved quality from approved quarry including hoisting, lowering and laying concrete, watering and curing including cost of all labour T&P royalties etc. required for the work as directed by the Engineer in Charge. |
| 6 | P.C.C. M-15 Grade in foundation bed as levelling course using 40mm to 10mm size crushed stone aggregates mixed by concrete mixer, laying in layers and compacting by vibrator & all leads and lifts as per approved Drawing & Technical Specifications and as per Section - 1700 & 2100 ofMoRT&H Specifications for Road & Bridge works (5th Revision) including cost, conveyance, royality & other taxes of materials, cost of labour, machinery, T&P etc complete. |
| 7 | P.C.C. M-15 Grade in foundation bed with formwork using 40mm to 10mm size crushed stone aggregates mixed by concrete mixer, laying in layers and compacting by vibrator & all leads and lifts as per approved Drawing & Technical Specifications and as per Section - 1700 & 2100 ofMoRT&H Specifications for Road & Bridge works (5th Revision) including cost, conveyance, royality & other taxes of materials, cost of labour, machinery, T&P etc complete. |
| 8 | RCC-20 grade in substructureusing 4cm (3/2\") size clean black broken granite metal of approved quality from approved quarry including hoisting, lowering and laying in layers not excedding 15cm. (6\") thick to the required level, ramming, watering, curring including frame work etc. complete including cost, conveyance, royalties and taxes of all materials and labour with T&P required for the work etc. complete as directed by the Engineer-in-charge. |
| 9 | RCC of M-20 grade (equivalent to a nominal mix of proportion 1:1.5:3) as per approved designs and drawings having a minimum compressive strength (in work test) of 200kg/cm2 in 15 cm cubes at 28 days after mixing and test conducted in accordance with I.S. 456 and I.S. 516 using 12mm to 20mm size black hard crusher broken granite chips (20mm size chips not to exceed 25%) and screened and washed sharp sand for mortar of approved quality from approved qarry to be mixed in concrete mixture including hoisting, lowering, laying and compacting concerete by using vibrators, watering and curing for 28 days, centring and shuttering then after dismantling and removing debries from the work site and finishing the exposed surface smooth including cost, conveyance, royalties and taxes of all materials and cost of all labours, sundries, T&P, required for the work etc. complete but excluding cost and conveyance of M.S. rods or Tor steel and binding wires of 18 to 20 guage and labour charges for straightening, cutting, bending etc. of M.S. rods or Tor steel tying the grills and placing in proper position in all floors as directed by the Engineer in Charge.Column base |
| 10 | Plinth Beam |
| 11 | Column superstructure |
| 12 | Lintel |
| 13 | Chajja |
| 14 | Roof Beam |
| 15 | Roof Slab |
| 16 | RCC Well Ring |
| 17 | Cover Slab |
| 18 | Supplying, cutting, straightening coiled or bent up M.S. rods or Tor steel of SAIL (HYSD Fe-415) welding or jointing if necessary, bending, binding, tying the grills and laying in position as required for RCC works and hoisting, lowering and placing in position in all floors according to approved designs and drawings including cost, conveyance, taxes of M.S. rods or Tor steel and binding wires of 18 to 20 gauge required for the work and cost of all labour, sundries, T&P etc. complete in all respect as directed by the Engineer in Charge. |
| 19 | Fly Ash Brick Masonary in cement mortar (1:6) in foundation & plinth using Fly Ash bricks of 23cm x 11cm x 8cm size having a crushing not less than 35kg per Sq.Cm, including splays cutting, circular moulding, chamfering, corbelling, watering and curing including cost, conveyance, royalties, taxes of all materials and labour with T&P required for the work etc. complete in all respect in all floors. |
| 20 | Fly Ash Brick Masonary in cement mortar (1:6) in foundation & plinth using Fly Ash bricks of 23cm x 11cm x 8cm size having a crushing not less than 35kg per Sq.Cm, including splays cutting, circular moulding, chamfering, corbelling, watering and curing including cost, conveyance, royalties, taxes of all materials and labour with T&P required for the work etc. complete in all respect in all floors. |
| 21 | Fly Ash Brick Masonary in cement mortar (1:6) in superstructure using Fly Ash bricks of 23cm x 11cm x 8cm size having a crushing not less than 35kg per Sq.Cm, including splays cutting, circular moulding, chamfering, corbelling, watering and curing including cost, conveyance, royalties, taxes of all materials and labour with T&P required for the work etc. complete in all respect in all floors. |
| 22 | 2.5cm (1\") thick grading concrete with cement (1:2:2) using 6mm & down graded size over roof slab to proper slope finished smooth, watering and curing including cost, conveyance, taxes and royalties of all materials and labour with T&P required for the work etc. complete in all respect in all floors. |
| 23 | 16mm (5/8\") thick cement plaster (1:6) finished smooth to brick work after racking out joints including watering and curing, cost, conveyance, royalties and taxes of all materials, labour with T&P required for the work etc. complete in all respect in all floors. |
| 24 | 12mm (1/2\") thick cement plaster (1:6) finished smooth to brick work after racking out joints including watering and curing, cost, conveyance, royalties and taxes of all materials, labour with T&P required for the work etc. complete in all respect in all floors. |
| 25 | 6mm thick cement plaster (1:4) finished smooth to rcc surface after racking out joints including watering and curing, cost, conveyance, royalties and taxes of all materials, labour with T&P required for the work etc. complete in all respect in all floors. |
| 26 | Supplying, fiting & fixing of Vetrified Tiles of premium grade having thickness 8mm to 10mm confirming to IS 13756 of 60cm x 60cm plain size (Ivory) in floors, treads or steps and landing on 25mm thick bed of cement mortar, cement and sand (1:1) jointed with neat cement slurry mixed with pigment to match the shade of the tiles including cost, conveyance, royalties and taxes of all materials with labour, T&P required for the work etc. complete in all respect in all floors as directed by the Engineer in Charge. |
| 27 | Supplying, fiting & fixing of Vetrified Tiles of premium grade having thickness 8mm to 10mm confirming to IS 13756 of 60cm x 60cm plain size (Ivory) in dados, skirting and rises of steps on 12mmthick cement plaster 1:3 (1 cement : 3 Sand) jointed with neat cement slurry mixed with pigment to match the shade of the tiles including cost, conveyance, royalties and taxes of all materials with labour, T&P required for the work etc. complete in all respect in all floors as directed by the Engineer in Charge. |
| 28 | Supplying, fiting & fixing of Industrial Vetrified Tiles of premium grade having thickness 8mm to 10mm confirming to IS 13756 of 60cm x 60cm plain size (Ivory) in floors, treads or steps and landing on 25mm thick bed of cement mortar, cement and sand (1:1) jointed with neat cement slurry mixed with pigment to match the shade of the tiles including cost, conveyance, royalties and taxes of all materials with labour, T&P required for the work etc. complete in all respect in all floors as directed by the Engineer in Charge. |
| 29 | Supplying, fiting & fixing of Granite Tiles of premium grade having thickness 8mm to 10mm confirming to IS 13756 of 60cm x 60cm plain size (Ivory) in floors, treads or steps and landing on 25mm thick bed of cement mortar, cement and sand (1:1) jointed with neat cement slurry mixed with pigment to match the shade of the tiles including cost, conveyance, royalties and taxes of all materials with labour, T&P required for the work etc. complete in all respect in all floors as directed by the Engineer in Charge. |
| 30 | Supplying, fiting & fixing of Kota stone tiles of minimum 16mm thick above 0.10 Sqm. of approved quality, colour and size in floors, treads or steps and landing on 25mm thick bed of cement mortar cement and sand (1:1) jointed with neat cement slurry mixed with pigment to match the shade of the tiles including cost, conveyance, royalties and taxes of all materials with labour, T&P required for the work etc. complete in all respect in all floors as directed by the Engineer in Charge. |
| 31 | Supplying, fitting and fixing of Ceramic tiles of premium grade having thickness 8mm to 10mm confirming to IS 13756 of 60Cm x 60Cm plain size (Ivory) in dados, skirting and rises of steps on 12mm thick cement plaster 1:3 (1 Cement : 3 Sand)jointed with neat cement slurry mixed with pigment to match the shade of the tiles including cost, conveyance, royalties and taxes of all materials with labour, T&P required for the work etc. complete in all respect in all floors as directed by the Engineer-In-Charge. |
| 32 | Supplying, fitting & fixing of M.S Window, Grills, Grill doors & M.S. Doorswith angle iron frame of approved design in proper position and making good to the damages to wall or RCC structure including mending or cutting to sizes or grooves in walls and fixing with C.C (1:2:4) with cost, coveyance, royalties and taxes of all materials with all labour, T&P required etc. complete in all floors. |
| 33 | Providing, fitting & fixing of false ceiling with Arm Strong man runner cross tee, wall angle with fine fissured RH-99 board on 4 walls to be fixed by means of steel screw, PVC plug & the Arm strong gnd 2\"-0\" x 2\"-0\" suspended from ceiling etc. complete. |
| 34 | Providing, fitting & fixing up partition walling OEL aluminium anodised section No. 9210 and 9207 as single groove and double groove respectively as horizantal and vertical member and OEL section 4660 as Tapered clip for fixing up 12mm thick prelaminated board (Nova pan Make) and jointing angle No.1855 etc. |
| 35 | Providing , fitting & fixing of Al. door with OEL anodized Al. door section of 9202 aas vertical member, 9201 as top member and 9200 as bottom and middle member and 6mm plain glass in top portion with 12mm thick prelaminated board in botttom portion fixed on door frame by means of tapered clip No.4660 and frame to be completed bt means of jointing angle No.1855 including all cost of labour T & P hire charges of drilling machine labour charges etc complete. |
| 36 | Supplying, fitting & fixing of window (sliding type made up alminum section) 151-154,151-155, as windows frame section No.151-155, 151-153 nad 151-167 as shutter framw with 5mm thcik black glass as panel fitted with rubber beading including locking arrangement including all fitting including cost of materials all taxes labour T & P etc complete as per direction of Enginner -in charge. |
| 37 | Finishing wall surface with acrylic wall putty (water based) of approved make and finished smooth to receive painting including cost of scaffolding, staging charges with cost & conveyance of all materials taxes labour T&P erc. Complete as directed by Engineer in Charge. |
| 38 | Providing, fitting & fixing of Stainless Mosquito Nets of approved design & quality including of all cost, conveyance, taxes & royalties of all materials, labour with T&P required for the work etc all complete. |
| 39 | Cement washing two coats with shell lime of approved quality to the interior surface of walls and ceiling in all floors to all heights, including, cost, conveyance and taxes of all materials and cost of all labour, scaffolding, sundries and T&P etc. required for the work complete as directed by the Engineer in charge. |
| 40 | Plastic emulsion paint two coats over a coat of primer of approved quality to the interior surface of walls and ceiling in all floors to all heights, including, cost, conveyance and taxes of all materials and cost of all labour, scaffolding, sundries and T&P etc. required for the work complete as directed by the Engineer in charge. |
| 41 | Weather seal paint two coats with any approved shade including of all cost, conveyance, taxes & royalties of all materials, labour with T&P required for the work etc all complete. |
| 42 | Weather seal paint two coats over a coat of primer with any approved shade including of all cost, conveyance, taxes & royalties of all materials, labour with T&P required for the work etc all complete. |
| 43 | Distempering two coats to wall surface with any approved quality and shade over prepared surface to give an even shade including cost, conveyance, taxes of distemper and brushes, all labour T&P required for the work etc. complete in all respects. |
| 44 | Enamel paint two coats over a coat of primer with any approved shade including of all cost, conveyance, taxes & royalties of all materials, labour with T&P required for the work etc all complete. |
| 45 | Supplying, fitting & fixing of prepainted sheet in roof including fixing of ridges, wind ties, \"J\" hook G.I and limpet washers, bolts and nuts, drilling in wind tiles with cost, conveyance, royalties and taxes of all materials with all labour, T&P required etc complete as directed by the Engineer in Charge. |
| 46 | Filling in foundation trenches and plinth with excavated earth well watered and rammed in layers not eceeding 23cm. In depth with all leads and lifts including cost, conveyance, royalties and taxes of all materials, cost of all albour, sundries, T&P requiered for the work etc. complete in all respect as direceted by the Engineer in Charge.` |
| 47 | Providing Two Nos bore well of 150mm dia and 6.0 m depth with encasing of perforated PVC pipe and geo fabric etc as per direction of Engineer in charge |
| 48 | Manufacturing, supplying of information sign board of size 6x4 ft made of 1.5inch diameter TP304 stainless steel fixed with 3 inch diameter TP304 stainless steel pipes of height 12ft with ground clamps arrangement including cutting, welding and shaping to the size of ACP sheet board sticking with High Intensive Prismatic (HIP) retro reflective sheet, coated with an overlap sheeting with computerized letter of subject matter and symbols as per the direction including cost of materials, labour and T&P etc. complete as per the direction of Engineer-In-Charge. --Single Side |
| 49 | Both Sides |
| 50 | Providing, fitting & fixing of Name Plates & Letter Branding including of all cost, conveyance, taxes & royalties of all materials, labour with T&P required for the work etc all complete.---Acrylic Name Plate (18x8) B/S |
| 51 | Acrylic Name Plate (30x8) S/S |
| 52 | Acrylic Name Plate (24x8) S/S |
| 53 | Acrylic Name Plate (18x6) S/S |
| 54 | Acrylic Vinyle Name Plate (24x12) |
| 55 | 6mm Sunboard Name Plate (24x8) |
| 56 | Stainless Steel Letter Branding (12\") |
| 57 | Stainless Steel Name Plate (3168 Sqm) |
| 58 | Stainless Steel Logo (900 Sqin) |
| 59 | PH WORKSSupplying all materials , labour, T&P and providing and fixing to wall or ceiling and floor CPVC pipes conforming to IS: 15778 and G.I pipe fittings of the following nominal bore with clamps including making good the wall,ceiling and floor ,testing all complete as per P.H. specification and direction of Engineer-in-charge----20mm dia C - PVC pipe |
| 60 | 25mm dia C - PVC pipe |
| 61 | Supplying all materials, labour T&P and fitting and fixing brass/CP fittings of the following nominal bore with supply of all joiniting materialsincluding cost & conveyance of all materials to worksite, payment oftaxes etc. allcomplete as per P.H specification and direction of the Engineer-in-charge.--15mm dia CP angle stop cock (Con-CHR-053KN Jaquar make) |
| 62 | 15mm dia CP two in one bib cock (Con-CHR-041KN Jaquar make) |
| 63 | 15mm dia CP Long Body Bib cock (Con-CHR-107KN Jaquar make) |
| 64 | 25mm dia brassfull way valve (Shakti make) |
| 65 | 15mm dia CP Health faucet (Con-ALD-MCH-573 Jaquar make) |
| 66 | supplying all materials, labour, T&P and cutting holes through existing brick work including making good the damages in cement mortar (1:4) for taking G.I. Pipes and fittings/ P.V.C. pipes and fittings including watering, curing, cost & conveyance of all materials to worksite,payment of royality, taxes etc. all complete as perdirection ofEngineer-in-charge. |
| 67 | Supplying all materials, labour, T&P and cutting grooves in pucca floors and walls for taking G.I./P.V.C. pipes and making good the damagesincluding watering ,curing , cost & conveyance of all materials to worksite, payment of royality, taxes etc all complete as per direction of the Engineer-in-charge. |
| 68 | Supplying all materials, labour, T&P and fitting and fixing U-PVC SWR soil waste ventilating pipes and fittings of the following outside diameter conforming to ISI No 13592/1992 to walls with nails, bobbins and wooden plugs or laying in trenches including jointing with supply of approved rubber lubricant by non-heat application method/as per manufacturer\"s specification, testing, earthwork in excavation in all kinds of soil and refilling of trenches , cost & conveyance of all materials to worksite, payment oftaxes etc.all complete as per P.H specification and direction of the Engineer-in-charge. ---110mm U-PVC SWR Pipe (Ori Plast/Finolex/Supreme Make Type-B) |
| 69 | 110mm U-PVC door bend(Ori Plast/Finolex/Supreme Make) |
| 70 | 110mm U-PVC Plain bend(Ori Plast/Finolex/Supreme Make) |
| 71 | 110mm U-PVC Cowl(Ori Plast/Finolex/Supreme Make) |
| 72 | 110mm U-PVC Plain tee(Ori Plast/Finolex/Supreme Make) |
| 73 | 110mm U-PVC Door tee(Ori Plast/Finolex/Supreme Make) |
| 74 | 110mm U-PVC Plain shoe bend(Ori Plast/Finolex/Supreme Make) |
| 75 | 110mm U-PVC Socket(Ori Plast/Finolex/Supreme Make) |
| 76 | Supplying all materials , labour, T&P and fixing rotational mouldedpolyethylene cylindrical vertical water storage tanks conforming to IS:12701/1996 including cutting holes through the tank and fixing mild steel tubes and fittings and providing extra sockets and jam nuts, fixing ball valve etc. including hoisting upto a height of 5 metres above ground level and placing the tank to the required position and providing 5.40 mtr. lengthx0.25 mtr widthKBbrickwork in cement mortar (1:6) of 0.46m height in staging and 0.13mtr thick circular protection wall of 0.46mtr height to support the tank,12mm thick cement plaster in cement mortar (1:6) over brick work, RCC slab of size 1.60mX1.60m and 0.10m thick ,RCC beam of 0.25mx0.30m and 3.40m average length in cement concrete (1:2:4) using 12mm size crusher broken hard black granite chips and required steel reinforcement including centering and shuttering,watering,curing ,cost of all materials,conveyance of all materials to worksite , payment of royalty, all taxesetc.all complete as per approved drawing , P.H. specification and direction ofEngineer-in-charge ----2000 liters capacityPVC water storage tank |
| 77 | Supplying all materials, labour T&P and and fixing 12.50 liters/10 liters capacity low level flushing cistern with a pair of cast iron or M.S. brackets complete with fittings such as siphonic arrangements 15mm nominal size brass/pvc ball valve with polythene float CP brass handle,unions and couplings for connection with inlet, outlet and overflow pipes, 32mm dia CP long flush bend, 15mm dia pvc inlet connection pipe including cutting holes and making good the same and connecting the flush bend with cistern and closet and connceting the inlet pipe with suupply main , cost & conveyance of all materials to worksite, payment oftaxes etc. all complete as perP.H specification and direction of the Engineer-in-charge---10 ltr. Capacity pvc L.L. cistern with 32mm. Dia CP long flush bend ( Slimline-white-Parryware make ) |
| 78 | Supplying all materials, labour, T&P and fixing the following vitreous china Wash Down Water Closet(European type W.C. pan)with integral \"p\" or \"s\" trap to the floor with wooden plug and chromium plated pedestal screws including jointing the trap with soil pipe in cement mortar (1:1) fixing plastic seat and cover for wash down water closet with chromium plated brass hinges and rubber buffers including polishing , cost & conveyance of all materials to worksite, payment of royality, taxes etc. all complete as per P.H specification and direction of the Engineer-in-chargeEuropean water closet with \"p\" trap plain(Hindware/Parryware/Neycer make) |
| 79 | Supplying all materials, labour T&P and fixing wash basins with hole for pillar taps with cast iron or M.S.brackets painted white including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc, fixing pedestal for wash basin recessed at the back for the reception of pipes and fittings, fixing PVC waste pipe of 32mm nominal diameter for wash basin including brass check nut complete, fixing pillar taps capstan head screw down high pressure lettered \"Hot\" and \"Cold\" with long screws, shanks and back nuts of 15mm dia nominal bore, fixing 15mm dia PVC inlet connection pipe and making connection with pillar cocks and supply mains for wash basin, fixing 32mm dia CP brass waste, cost & conveyance of all materials to worksite, payment oftaxes etc. all complete as perP.H specification and direction of the Engineer-in-charge----550mmx400mm W.H.basin (Hindware/Parryware/Neycer make)with 15mm dia C.P.pillar cock (Plaza make) with 22” x 16” pedestal |
| 80 | Supplying all materials, labour, T&P and fixing standard sized CP towel rail complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge25mmx600mm long CP towel rail |
| 81 | Towel ring |
| 82 | Supplying all materials, labour, T&P and fixing standard sized glass-shelf with CP brass brackets and guard rail complete fixed to wooden plugs with CP screws as per specification and direction of Engineer in charge.---600mmx125mm plate glass shelf with CP/NP guard rails. |
| 83 | Supplying all materials, labour, T&P and fixing mirror of superior glass mounted on 6mm.thick A.C. sheet or ply wood sheet and fixed to wooden plugs with CP screws and washers complete as per specification and direction of Engineer in charge. |
| 84 | Supplying all materials, labour, T&P and fixing CP soap holder complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge |
| 85 | Supplying all materials , labour, T&P and cutting holes through existing brickor laterite masonry wall for takingU-PVC pipes and fittings including making good the damages etc. all complete as per P.H. specification and direction of Engineer-in-charge |
| 86 | Supplying all materials, labour, T&P and providing cement concrete ( 1:2:4 ) with 12mm size crusher broken hard black granite chips including watering, curing,cost of all materials, conveyance of all materials to work site with payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge |
| 87 | Supplying all materials, labour, T&P and providing and fixing ceramic tiles in floors, treads or steps and landing on 25mm thick bed of cement mortar (1:1) ( 1 cement : 1 sand ) jointed with neat cement slurry mixed with pigment to match the shades of the tilesincludingwatering, curing,cost of all materials, conveyance of all materials to work site , payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge ( ceramic floor tiles of premium grade having thickness 7mm to 8mm conforming to IS 13755 of size 40cmx40cm special printed seriesto be pre-approved by the Engineer-in-charge ) |
| 88 | Supplying all materials,labour,T&P and providing 12mm thick cement plaster(1:4) on brick work including watering,curing,cost of all materials, conveyance of all materials to worksite,paymentof royalty,all taxes etc.all complete as per PWD specification and direction of the Engineer-in-charge. |
| 89 | Supplying all materials, labour, T&P and providing and fixing porcelain glazed tiles in dado skirtingon 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigment to match the shades of the tilesincludingwatering, curing,cost of all materials, conveyance of all materials to work site , payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge( ceramic wall tiles of premium grade having thickness 6.5mm to 6.7mm conforming to IS 13753 of size 25cmx33cm special plain / printed series to be pre-approved by the Engineer-in-charge ) |
| 90 | Factory made single leaf Solid WPC (Wood polymer) composite door shutter of 25mm thickcompacted with wood grain finishstructural foam panel of 29mm thickness and a density of 20kg/cu.mtr shall be used as core material for fitting the metal fittings such as tower bolts, aldrops, handles etc shall be provided. A structural adhesive compatible with (EPS) foam shall be used for bending the core material,The material and process for manufacturing the door shutters shall conform to RV-TIFAC composites Design Centre\"s standards and specifications and the door shutters Conforming to relevant I.S.specification. The finish of door shutter will be plain colour white/ Ivory/ Beige/ Light grey/ Mahogany/ Teak wood or any other colour using high quality pigments. Three heavy whight mild steel butt hinges type-I(ISI marked) size 100mm are to be fitted on one side of shutter. 2 x 0.75 x 2.10 = |
| 91 | Factory made Solid WPC door frame of size 95mmx55mm fabricated .The door frame consist of four segments which are provided with plug-in-socket arrangement in-situ in the mould. The segments are plugged in and are joined together by means of screw. The WPC frame shall be provided with The material and process for manufacturing the door frames shall conform to Relavent I.S.specification. The finish of door frame will be plain colour white/ Ivory/ Beige/ Light grey/ Golden brown/Mahogany/ Teak wood/sand stone/Champagne/Pastel blue or any other colour using high quality pigmentscomplete in all respect as per specification and direction of the Engineer in charge 2 x (0.75 + 2.10 +2.10 ) = |
| 92 | Supplying all materials, labour, T&P for fitting & fixing plain edge kitchen/wall sink of all standard sizes with a pair of bracket, C.P. waste, trap & P.V.C. waste pipe & painting brackets including supply of cement concrete & mortar etc. all complete. 24” x 18” x 10” sink |
| 93 | Supplying all materials, labour, T&P and providing fitting and fixing (Aqua guard) pure chill 80 PSS UV of size 750 x 570 x 1350mm hight with water storage capacity 120 liter\"s along withnoa of faucets 2 for cold water and 1 for normal water including a flow of 1.5 ltr per munite etc all complete as per approved drawing , specification and direction of the Engineer in chargeAqua guard pure Chill 80 PSS UV |
| 94 | External PH WorkSupplying all materials, labour, T&P and laying in trenches (to level or slope) unplasticized P.V.C. pipe conforming to IS 4985/2000 of the following out side dia for class- 3 (0.60mpa ) including jointing with supply of approved solvent cement by non-heat application method/as per manufacture\"s specification, provoding and laying in trench cement concrete (1:4:8) with 40mm size hard granite metal in the type C-1 standard bedding surrounding or encasing including concrete for bedding and curing etc all complete as per P.H. specification and direction of the Engineer in charge100mm dia P.V.C. pipe |
| 95 | Supplying all materials ,labour ,T&P and constructing Inspection Chamber ofinside size 760mmx760mmx460mmwith cement concrete (1:3:6) using 40mm size crusher broken hard black granite metal on bed , KB brick work in cement mortar (1:6) in foundation and plinth, moulding and shaping the channel inside and benching with cement concrete (1:2:4) using 12mm size crusher broken hard black granite chips,12mm thick cement plaster (1:3)with cement punning to inside, cement flush pointing (1:3) to outside, R.C.C cover slab (1:2:4) using 12mm size crusher broken hard black granite chips with R.C.C man hole cover, earth work in excavation in all kinds of soil and refilling the cavity around the chamber including watering,curing,cost of all materials, conveyance of all materials to worksite, payment of royalty,all taxesetc.all complete as perapproved drawing, P.H specification and direction of Engineer-in-charge--Inside size 76cmx76cmx46cm with 18” dia RCC MH cover |
| 96 | Supplying all materials labour T&P and constructing 1.40m dia x 2.00 m deep soak way pit with dry brick having crossing strength not less than 75Kg/CM2 to 99Kg/CM2 in CM(1:6) for the remaining 0.4572mm height of wall at top CC(1:3)inside and outside inside fill with dry brick khoa size 38mm ,CM thick RCC perforated slab to a height of 1.9012m from bottom covered by means of 50mmthick RCC wall cover in pieces filled with iron plugs including earth work in excavation refilling of cavity around the pit and painting the iron works complete as per PHD design and specification including carriage of all materials to site. |
| 97 | 1 no 20 Users Septic TankEarth work in excavation of foundation in all kinds of soil with in 1.5m initial lift including dressing and leveling of bed and breaking the clods and the excavated materials with in 50m initial lead as per direction of Engineer in charge.1 x 3.40 x 2.30 x 1.50 = |
| 98 | Earth work in excavation of foundation in all kinds of soil with in 1.5m initial lift including dressing and leveling of bed and breaking the clods and the excavated materials with in 50m initial lead as per direction of Engineer in chargewith 1st extra lift of 1.50 m over initial laft. 1 x 3.40 x 2.30 x 0.60 = |
| 99 | Supplying all materials labor T&P filling sand in foundation and plinth with well watered and rammed etc all complete as per direction of Engineer-in-charge. 1 x 3.40 x 2.30 x 0.15 = |
| 100 | Supplying all materials, labor T&P providing CC (1:3:6) with 4 cm HG metal including watering curing lead of all materials to site etc. complete 1 x 3.40 x 2.30 x 0.15 = |
| 101 | Supplying all materials, labour, T&P and providing cement concrete ( 1:2:4 ) with 12mm size crusher broken hard black granite chips including watering, curing,cost of all materials, conveyance of all materials to work site with payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge. |
| 102 | Supplying all materials, labour, T&P and providing cement concrete (1:1½:3) with 12mm size crusher broken hard black granite chips for RCC works including hoisting, laying, watering, curing,cost of all materials, conveyance of all materials to worksite, payment of royalty,all taxes etc. all complete as per PWD specification and direction of the Engineer in charge.. |
| 103 | Supplying all materials, labour, T&P and providing steel reinforcement of Fe-415 /Fe-500 grade for RCC work including cutting,bending,bindingand tying the grills and placing in position including cost of binding wire 18 to 20 gauge,cost of steel, conveyance of all materials to worksite, payment of royalty,all taxes etc all complete as per PWD specification and direction of the Engineer-in-charge. |
| 104 | Supplying all materials, labour, T&P and providing rigid & smooth centering and shuttering for RCC works including false work and dismantling them after casting including conveyance of all materials to worksite, payment of royalty, taxes etc. all complete as perspecification and direction of the Engineer-in-charge |
| 105 | Supplying all materials.labour.T&P and providing brick work in foundation and plinth with 25cmx12cmx8cm size Fly Ash bricks having curshing strength not less than 75 kg/sqcm with dimensional tolerance+ 8% in cement mortar ( 1:3 ) including watering,curing,cost of all materials,conveyance of all materials to worksite,payment of royalty,all taxes etc.all complete as per PWD specification and direction of the Engineer in charge. |
| 106 | Supplying all materials,labour,T&P and providing 12mm thick cement plaster(1:3) on brick work including watering,curing,cost of all materials, conveyance of all materials to worksite,paymentof royalty,all taxes etc.all complete as per PWD specification and direction of the Engineer-in-charge. |
| 107 | Supplying all materials,labour,T&P and providing 16mm thick cement plaster(1:6) on brick work including watering,curing,cost of all materials, conveyance of all materials to worksite,paymentof royalty,all taxes etc.all complete as per PWD specification and direction of the Engineer-in-charge. |
| 108 | Supplying all materials, labour, T&P and providing cement punning including watering, curing,cost of all materials, conveyance of all materials to worksite, payment of royalty,all taxes etc. all complete as perspecification and direction of the Engineer-in-charge |
| 109 | Supplying all labor T&P & filling foundation and plinth with excavated materials well watered & rammed etc. all complete as per direction of EIC. |
| 110 | EI WORKS Recessed wiring to light point / fan point / exhaust fan point / call bell point with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non-metalic PVC flexible conduit with 5 Amp, 250 V one way modularswitch ISImarked and modular ceilingrose ISI marked mounted on MS box having front bakelite coverof suitable size ,modular G.I box with 1.5 sq.mm FR PVC insulated single core multistrandcopper conductor as earth wireincluding all accesories and connection as per direction of Engineer in Charge.( Make of wire Finolex / L&T / Anchor / Havels /HPL/ V Guard )----Group-A. |
| 111 | Group-B |
| 112 | Group-C |
| 113 | Point wiring for 5 / 6 amp modularsocket outlet with 2 x 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked in recess 20 mm dia non-metalic PVC flexible conduit with modular one way type switch ,phenolic laminated sheet suitable size ISI markedMS box and earthing point with 1 x 1.5 sq.mm FR PVCinsulated single core multistrand copperconductor for loop earthing etc. as required. ( Make of wire Finolex / L&T / Anchor / Havels / V Guard )----Group-A. |
| 114 | On Existing board. |
| 115 | S/F of 15A plug points withModular switch on M.S box with bakalite cover of Havels/Std make including all connection. |
| 116 | S/F of 25A D.P MCB protected plug & socket with plastic cover of Havels/L&T/C&S make ncluding all connection. |
| 117 | Submain with following sizes of PVC S.C. Cu. FR wire in 20mm dia non-metalic pipe with all accessories. (Make of wire-Finolex/ Anchor/ Havells)----a) 1x1.5 mm2 for inverter wiring |
| 118 | b) 2x1.5mm2 + 1x1.5mm2. |
| 119 | c) 2x2.5mm2 + 1x1.5mm2. |
| 120 | d) 2x4mm2 + 1x1.5 mm2 |
| 121 | e) 4X6mm2+2X2.5 mm2 |
| 122 | S/F. Of 1x18Wt. LED Tube light fittings including all connections and accessories(Bajaj/ Havells/Crompton/Philips make) |
| 123 | S/F. Of 1x15Wt. LED Bulb including all connections and accessories.(Bajaj/ Havells/Crompton/Philips make) |
| 124 | S/F of 15Watt Recess mounted round shaped/square shaped LED downlighter with opal diffuser and separate electronic driver.(Make-Havells/Crompton /Philips/Bajaj) |
| 125 | Supplying and fixing of call bell/Buzzer of ISI marked suitable for AC/DC of single phase including connection etc. |
| 126 | S/F of 48\" 1200mm Orient New Hurricane-pearl Ivery/Usha-Aure Ivory/Havels-ES New (2 star)/C.G-H.S Décor plus Energy efficient/Bajaj-Esteem make |
| 127 | S/F of 5 step type electronic Fan regulator of cona Deluxe/Anchor Deluxe make. |
| 128 | S/F of 8 way double door D.Box with 1x40A.DP+ 6x6A-32A of S.P MCBof Havels/HPL/Std//Anchor make |
| 129 | S/F of 45W LED Street light fittings complete with G.I bracket ( Make Havels/Bajaj ) |
| 130 | S/F of 63A TPN Al. busbar with Sheet steel enclosure on wall including all accessories and connection. |
| 131 | S/F of 63A, FP MCB C- Series Legrand / Hager / L&T Make with mettalic cover with installation and connection |
| 132 | S/F of Vantilator/Exhaust fans of Orient-300 mm Spring Air/USHA Aeroclean 300mm Goodbye Oiland Dust metal Exhaust fan for Kitchen (Metalic Grey) Havels-Venti Air DSP/Cromprton-Drift Air plus make. |
| 133 | S/F of 3x1/225mm2 All Armoured cable of ISImarked (Make Havels/Polycab) |
| 134 | S/F of 125 A Cubical pannel board madeout of 16SWG C.R. Sheets with power coats and following items of 30\"x24\"x12 ( Main Pannela) 125A, 36kA 4 pole MCCB of Havels make/L&T/C&S make - 1 nos b) 200A Cu bus Bar complete 01 nos c) 63A DP MCB of Havels/L&T/C&S make - 4 Nos d) Digital Voltmeter,Ammetor, RYB indicator, CT coils,Selector switch etc- 01 Set f) The panal board is to wired with suitable size of cupper stripsswhich are to be taped with different colours & Cu F.R wire different colourg) The panal board is tofitted with M.S frame on floor with C.C work and M.S.Nut bolts |
| 135 | S/F of standard earthing confirming to IS-3043/1987 including of S/F of 38mm/40mm dia heavy duty G.I pipe 3 mtrs long confirming to IS-1239/part-i/1990. The pipe shall have 12m dia perforated holes at 15cm interval center to center upto 2.5mtrs height from the bottom to upper end threaded and fitted with 38mm/40mm dia G.I flange with provision of holes for making connection to earth continuity wire,complete with measonary works. |
