Uttar Pradesh Industrial Development Corporation Limited has published Tender For Up-Gradation Of Electrical System Of Street Light Under Atal Industrial Infrastructure Mission At I.A. Foundry Nagar, Epip, Sikandra Abc And Staff Colony Agra.. Submission Date for this Tender is 23-06-2023. Street Lighting Tenders in agra Uttar Pradesh. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Supply & Fixing of LED street light fittings having die cast aluminium body and diffuser with driver set suitable for 90 Watt LED light confirming to IP 66 and above protection complete in all respect as per UPPWD Sch. No. 1423 CAT- AA (Philips, Crompton, Bajaj, Wipro make) |
| 2 | Supply, sagging, jointing and binding of insulated ACSR Weasel conductor including cost of aluminium tape binding and jointing sleaves etc. complete in all respect. |
| 3 | Supplying and laying of aluminium conductor PVC insulated, armoured, served, sheathed cable 1100 V grade at a depth of 750 mm below ground level over a cushion of 75 mm thick sand alround and protected with burnt bricks on sides and on top complete in all respects. as per PWD Sch. No. 501(i) 16 sq.mm 4 core(Polycab, Havells, Gloster, Granlay make) |
| 4 | Supply & laying 16 sq mm 2 core Al. conductor PVC insulated armoured, served, sheated cable 1100 V grade in existing HDPE pipe laid below ground level. The armouring of the cable shall be properly connected with earth conductor by clamp etc. as per PWD Sch. 501(c) & 507 (Polycab / Havells/ Grandle/gloster Make) |
| 5 | Supply & Laying of 90 mm dia (OD-90 mm & ID-76 mm nominal) DWC HDPE pipe ISI marked along with all accessories like socket, bend,couple etc. confirming to IS 14930 Part-II complete with fitting and cutting, jointing etc. direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning andprotective covering etc. complete in all respect |
| 6 | S/F of following capacity of automatic street light cubical control panel painted with anti corrosive alkali and acid proof paint consisting of timer switch TSO 100 series with contactors HRC fuses, isolating switch metering instrument box with CTS etc. (40 Amp. TPN) as per PWD Sch. No. 807(f) |
| 7 | S/B of 40 mm dia x 4.5 mtr. long G.I. pipe vertically for earthing having 12 mm dia. Holes spaced 75 mm apart drilled upto 2 mtr. from the bottom complete with earthing lead of no.6 to 8 SWG GI wire in G.I.pipe upto appron upto switch board 30 cm square box with hinged cover masonary enclosure. Funnel of top, alternate layers of charcoal and salt at least 150 mm thick alround etc. as per direction E/I complete in all respect as per drawing as per UPPWD Sch. No. 701 |
| 8 | Painting of ST pole and all mountings on it with two coats of aluminium paints with an under coat of red oxide paint on length of above 10 M. support above the ground level as per direction of Engineer in-charge of work/site including T&P , men & material required for proper completion of work as per SIDC Sch. No. 20.2(B) |
| 9 | S/F of palm or pin type copper tin plated cable socket (lug) to the cable leads insulating with tap and making connection etc. complete in all respects as per direction of the Engineer-inchargeas per UPPWD Sch. No. 504 (d) 16 sq.mm |
| 10 | S/F of brass nickel plated compression gland for PVC insulated and armoured served sheathed, underground cable including rubber ring etc. complete in all respects. The armouring of the cable shall be properly connected with the earth as per direction of Engineer-in charge as per UPPWD Sch. No. 503 (i) 16 sq.mm 4 core |
| 11 | S/F of brass nickel plated compression gland for PVC insulated and armoured served sheathed, underground cable including rubber ring etc. complete in all respects. The armouring of the cable shall be properly connected with the earth as per direction of Engineer-in charge as per UPPWD Sch. No. 503 (c) 16 sq.mm 2 core |
| 12 | S/F of palm or pin type copper tin plated cable socket (lug) to the cable leads insulating with tap and making connection etc. complete in all respects as per direction of the Engineer-inchargeas per UPPWD Sch. No. 504 (f) 35 sq.mm |
| 13 | S/F of brass nickel plated compression gland for PVC insulated and armoured served sheathed, underground cable including rubber ring etc. complete in all respects. The armouring of the cable shall be properly connected with the earth as per direction of Engineer-in charge as per UPPWD Sch. No. 503 (k) 35 sq.mm 3.5 core |
| 14 | Supply and laying of aluminium conductor PVC insulated, armoured, served, sheathed cable 1100 V grade at a depth of 750 mm below ground level over a cushion of 75 mm thick sand alround and protected with burnt bricks on sides and on top complete in all respects as per UPPWD Sch. No. 501(K) (35 sq.mm 3.5 core)(Polycab, Havells, Gloster, Grandlay make) |
| 15 | Supply & fixing of 100 mm dia G.I.pipes "B" class for climbing up the cable from ground to over head line including all accessories, material, labours and T&P required for proper completion of work as per specification as per SIDC Sch. No. 25.1 |
| 16 | Supply & Fixing of 25 x 3mm GI strip from earth electrode directly in the ground as required complete in all respect.(PWD Sch. No. 716) |
| 17 | Supply, sagging, jointing and binding of ACSR Weasel conductor including cost of aluminium tape binding and jointing sleaves etc. complete in all respect. SIDC Sch NO 10 (For LT Line3 Phase) |
| 18 | Supply & Fixing of L.T. ordinary pole fitting single phase 3 wire for street light mains in vertical configuration of supply &fixing of G.I. Shackleinsulator 250x50x3 mm 2 pairs with 18 mm dia holes SIDC.SCH NO 15.03 |
| 19 | Supply & Fixing of L.T. ordinary pole fitting for single circuit 3 phase 6wire linein vertical configuration consisting of two numbers 50x6 mm clamp of MS flat with two number 100x115 mm shackle insulator and one number 50x6 mm ms clamp for earth wire complete in all respect as per sidc sch. no. 13.4 |
| 20 | Repairing & Re-grouting of Steel tubular pole 410-SP.55 ,11 mtr long with 4 angles 100X100X6 mm Length 900 mmwith welding and 30 cm dia cement concrete plingth all arround the pole ground level complete all respect |
| 21 | supply and fixing of 32 mm dia 1.20 mtr long GI pipe bracket including bend pipe ,2 nos 50x6 mm ms clamp in all respect |
| 22 | Supply and wiring of submain with two nos.of 2.5 sq mm FRLSH PVC insulated 1100 V grade single core multistrand copper conductor cable in existing conduit complete with supply of all material labour and T&P required for proper completion of the work complete in all respect |
| 23 | Supply & Fixing of factory wired integral LED floodlight luminaries with die cast aluminium housing built with driver set suitable for 200 watt confirming to IP-66 protection complete in all respect as per UPPWD Sch. No. 1455Cat.-AA (Philips/Cromption/Bajaj /Wipro make) |
| 24 | Supply & Fixing of factory wired integral LED floodlight luminaries with die cast aluminium housing built with driver set suitable for 150 watt confirming to IP 66 protection complete in all respect as per UPPWD Sch. No. 1454Cat.-AA (Philips/Cromption/Bajaj /Wipro make) |
| 25 | S/F of wiring Cable(3Cx1.5 Sq.mm copper wire) for High Mast lighting system complete including all T&P men and material required for proper completion of work as per sanctioned Job No. ED-MFP(307) Dated 25.02.2023 |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
