Military Engineer Services-MES has published Tender For Repair To Flooring, Plastering, Plinth Etc In Md Accn Under Age Br-Iii At Bathinda Mil Stn. Submission Date for this Tender is 06-07-2023. Civil Work Tenders in bathinda Punjab. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | SCHEDULE "A" B/R Works |
| 2 | Demolition of floor hearth or wall tilling including cement mortar bedding but not backing including removing rubbish material from building and thrown in low lying empty area (as per direcction of AGE/JE) at any distance upto 500 metres from the site complete all as specified and as directed by Engineer-in-Charge |
| 3 | Taking down wooden shutters only of any description area exceeding 1.0 sqm and not exceeding 2.0 sqm eachand refixing in same opening after necessary easing, adjustments, minor repairs etc complete all as specified and as directed by Engineer-in-Charge |
| 4 | Resecuring and easing & adjusting without taking down shutters of any description exc. 1 Sqm and not exc. 2 Sqm each including all fittings, complete all as specified and as directed by Engineer-in-Charge |
| 5 | Material and labour for Non Skid ceramic coloured tiles 7 to 8mm thick square or rectangular area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, as in floor set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile includingnecessary cutting as per site requirement, tiles laid over and including 15 mm thick bedding layer (screed) in cement mortar (1:6) complete all as specified and directed by Engineer-in-Charge. |
| 6 | Material and labour for Non Skid ceramic coloured tiles 7 to 8mm thick square or rectangular each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, as in skirting, dado etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile includingnecessary cutting as per site requirement, tiles laid over and including 10 mm thick rendering/plastering in cement mortar (1:4) including making good excess taking down plaster area (above skirting tile ) complete all as specified and directed by Engineer-in-Charge. |
| 7 | Material and labour for Non Skid ceramic coloured tiles7 to 8 mm thick square or rectangular area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, as in floor set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile includingnecessary cutting as per site requirement, tiles laid over and including 15 mm thick bedding layer (screed) in cement mortar (1:6) complete all as specified and directed by Engineer-in-Charge. |
| 8 | Material and labour for Non Skid ceramic coloured tiles 7 to 8mm thick square or rectangular each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, as in skirting, dado etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile includingnecessary cutting as per site requirement, tiles laid over and including 10 mm thick rendering/plastering in cement mortar (1:4) including making good excess taking down plaster area (above skirting tile ) complete all as specified and directed by Engineer-in-Charge. |
| 9 | Material and labour for Glazed ceramic coloured tiles of size 300mmx 200mm / 450mmX 350mm// 450mmX 300mm, 7mm to 8mm thick, as in vertical surface set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile including necessary cutting as per site requirement, tiles laid over and including 10 mm thick (Av thickness) bedding layer (rendering) in cement mortar (1:4) complete all as specified and as directed by Engineer-in-Charge. |
| 10 | Demolition stone/marble slabs/tiles of any description or thickness as in floors/ cooking platform/steps etc. laid bedded and pointed in any mortar including removing rubbish material from the site complete all as specified and as directed by Engineer-in-charge. |
| 11 | Material and labour 20mm thick machine cut, granite duly factory grinding and polished (table rubbed and polished) of approved colour for counter sunk wash basin, plateform/cooking plateform or as directed, including screed bed 15mm thick in cement mortar (1:4) (grey cement slurry) including pointing in white cement(1:2)using marble dust with admiture of pigmentto matchwith shade of granite stone slab including cutting as required including cleaning and extra polishing if required complete all as specified and as directed by Engineer-in-Charge. |
| 12 | Material and labour for moulding the edges half round on exposed side (Rounding to edges of stone slabs one edge) of granite/marble as in kitchen shelf, cooking platform, WHB counter shelf, steps, and other similar situations etc complete all as specified and directed by Engineer-in-Charge. |
| 13 | Supply & fixing 20cm x 20cm x 25mm / 30cm x 30cm x 25mm thick chequered cement concrete tiles as in floor/path, set, jointed and pointed in neat cement slurry with grey cement and no pigment, tiles laid over and including 15 mm thick bedding layer (screed) in cement mortar (1:6) complete all as specified and as directed by Engineer-in-Charge. |
| 14 | Supply and fixing 60 mm thick (M35 grade) precast interlocking tile/paving block factory casted (made by using PVC paver mould / Rubber paver moulds on Vibrating Table Machine) using grey cement and no pigment, shape haxagon / trigular / zigzag / I-shaped etc, as directed, prepolished & preglazed, specification as per relevant IS, having compressive strength not less than 350 Kg/ Sqcm, laid over sand upto required thick layer and filling the interstices etc complete all as specified and as directed by the Engineer-in-Charge. Note : - (i) Sand for filling shall be measured & paid separately as Supply only but labour for spreding leveling shall be included in the unit rate of this item) |
| 15 | Supply only fine sand without silt (Fazilka/Zera or any other approved sources)for filling under interlocking tiles and the interstices etc complete all as specified and as directed by the Engineer-in-Charge. |
| 16 | Material and labour for 75mm thickcement concrete ( 1:4:8),type D-2 using 40 mm graded stone aggregate as in sub base complete all as specified and as directed by Engineer-in-charge. |
| 17 | Material and labour for PCC (1:3:6), type C-1 using 20 mm graded stone aggregate as incoping/packing around chequered tiles/interlocking tiles/PCC jalli & similar work etc complete all as specified and as directed by Engineer-in-charge. |
| 18 | Demolition of cement concrete (unreinforced) in ground floor and paving not exceeding 15cm thickness below or above ground level of any description and in any position including removing rubbish material from building and thrown in low lying empty area (as per direcction of AGE/JE) at any distance upto 500 metres from the site complete all as specified and as directed by Engineer-in-Charge |
| 19 | Material and labour for 75 mm thick PCC (1:3:6) type C-2 using 40mm graded stone aggregate as in flooring, hard standing, plinth protection/path etc. finished even and smooth without using extra cement complete all as specified and as directed by the Engineer-in-Charge. |
| 20 | Taking down cement or cement lime plaster from brick wall etc including racking out joints, hacking for key & scrubbing down with water etc complete all as specified and directed by Engineer-in-Charge. |
| 21 | Material and labour for plastering 15mm thick on internal surface at any story or any height in cement mortar (1:6) on fare face of Brick walls or concrete surfaces, finished even and smooth without using extra cement complete all as specified and as directed by the Engineer-in-Charge. |
| 22 | Material and labour for rendering/plastering 10mm thick at any height in cement mortar (1:3) on any face of ceiling, finished fair and even and smooth without using extra cement complete all as specified and as directed by the Engineer-in-Charge. |
| 23 | Material and labour for rendering/plastering 15mm thick on external surface at any story or any height in cement mortar (1:4) on any face of Brick walls or concrete surfaces or stone masonry, parapets, chajjas, shafts including finished even and smooth without using extra cementcomplete all as specified and as directed by the Engineer-in-Charge. |
| 24 | Material and labour for preparing newly plastered or concrete surface of ceiling by sand papering or by any other mean and after preparing the surfaces applying three coats of white wash complete all as specified & directed by Engineer-in- charge |
| 25 | Material and labour for preparation of new plastered surfaces of walls/pillars /cornices by brooming down with using broom/sand papering or by any other means, and preparing the surfaces smooth by applying chalk whiting to make the surface even and smooth upto entire satisfaction of Engineer-in-charge, and after preparing the surfaces applying two coats ofoil emulsion distemper (washable), as approved tint/colour by using paint roller brush complete all as specified and as directed by Engineer-in-Charge. |
| 26 | Material and labour for preparation of new plastered surfaces of walls/pillars /cornices by brooming down with using broom/sand papering or by any other mean, washing down with water and applying twocoats of exterior acrylic emulsion paint (one coat as as priming coat) as per approved tint/colour byusing paint brush complete all as specified and as directed by Engineer-in-Charge. |
| 27 | Demolition of brick work or stone / boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc, in any description including cleaning and stacking serviceable brick for re use and balance removing rubbish from the site complete all as specified and as directed by Engineer-in-charge. |
| 28 | Material and labour for brick work with sub class ‘B’ old size burnt clay bricks, straight or curved on plan exc. 6 metre mean radius built in cement mortar (1:6) complete all as specified and as directed by Engineer-in-charge. |
| 29 | Material & Labourfor 100 mm bore cast iron soil waste and vent pipe (sand cast pipe ) in any length with or without ears,fixed to wall with stack clamps (interval of 1m) made out of FI 50x5mm and 16mm dia round iron stay including nut bolt and jointing with cement mortar, including taking down old unserviceable pipe any size,complete all as specified and as directed by Engineer-in- charge. |
| 30 | Supply & fixing 100mm bore cast iron bends/T/Y (any radius)/elbo,diminishing pieces or tapers (larger bore measured) with oval access door fixed with cement joints complete all as specified and as directed by Engineer-in- charge. |
| 31 | Material & Labourfor 75 mm bore cast iron soil waste and vent pipe (sand cast pipe ) in any length with or without ears,fixed to wall with stack clamps (interval of 1m) made out of FI 50x5mm and 16mm dia round iron stay including nut bolt and jointing with cement mortar, including taking down old unserviceable pipe any size,complete all as specified and as directed by Engineer-in- charge. |
| 32 | Supply & fixing 75mm bore cast iron bends/T/Y (any radius)/elbo,diminishing pieces or tapers (larger bore measured) with oval access door fixed with cement joints complete all as specified and as directed by Engineer-in- charge. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
