|
| 1 | Dismantling,Clearing away and carefully reinforced cement concrete etc., complete. |
| 2 | Dismantling,Clearing away and carefully plain cement concrete etc., complete. |
| 3 | Dismantling,Clearing away and carefully Brick work of any thickness of wall etc., complete. |
| 4 | Earth work excavation for foundation in Hard stiff clay, stiff black cotton, hard red earth, shales murram, gravel,stoney earth and earth mixed with small size boulders SS.20B and Sand, silt or other loose soil, wet sand,or silt not under water, light black cotton soil, sandy loam ordinary soil and to full depth as may be directed except in hardrockrequiring blasting inclusive of shoring shuttering and baling out water and cleaning and levelling the site etc.,complete |
| 5 | Cement concrete 1:4:8 (one cement, four sand and Eight stone jelly) using 40mm gauge hard broken granite stone jelly for flooring including consolidating as per standard specification, rendering the top rough to take the floor finish and curing etc., complete and complying with standard specification. |
| 6 | Cement concrete 1:1.5:3(one cement, one and half sand and theree stone jelly) using 20mm gauge hard broken granite stone jelly for flooring including consolidating as per standard specification, rendering the top rough to take the floor finish and curing etc., complete and complying with standard specification. |
| 7 | Brick work using Fly Ash Bricks in Cement Mortar 1:5 (one cement and five sand) including cost and conveyance of all materials ,and labour charges for mixing the mortar ,constructing ,curing to requried period and wherever the masonry projection is neccasary for elevation shall be done with out extra cost etc ,complete complying with standard specification. |
| 8 | Supplying, fabricating and placing in position M.S. or R.T.S. reinforcements grill for RCC works as per the design given including cost of steel and binding wire etc., complete complying with standard specification. |
| 9 | Supplying and erecting steel centering including necessary supports for plane surfaces in foundation and basement for reinforced cement concrete works such as column footings, plinth beam, grade beam, stair case steps, bed blocks etc. which require only normal strutting using M.S. sheets of size 90cm x60cm BG 10 gauge of stiffened with mild steel angles of size 25mm x 25mm x 3mm for boarding laid over silver oak joists of size 10 x 6.50cm spaced at about 90 cm centre to centre and supported by the casurina props of 10cm to 13cm dia spaced at 75cm centreto centre atsuitableintervals etc. complyingwithstandardspecification. |
| 10 | Cement concrete 1:2:4(one cement, two sand and four stone jelly) using 20mm gauge hard broken granite stone jelly for flooring including consolidating as per standard specification, rendering the top rough to take the floor finish and curing etc., complete and complying with standard specification. |
| 11 | Reinforcement Cement Concrete 1:1½:3 (One cement, one and half sand and three stone jelly) using 20 mm gauge hard granite broken stone jelly for all reinforced cement concrete works excluding cost of reinforcement grill and fabricating charges, centering and shuttering but including laying, vibrating with mechanical vibrator, finishing, curing, etc.complete as directed by the Departmental Officers |
| 12 | Plastering with Cement Mortar 1:5 (One cement and Five sand), 12 mm thick in all floors including curing etc. complete complying with standard specification and as directed by the departmental officers. |
| 13 | Plastering with Cement Mortar 1:3 (One cement and Three sand), 20 mm thick in all floors including curing etc. complete complying with standard specification and as directed by the departmental officers. |
| 14 | Supplying & fixingdoor shutters for Mediun Density Fiber Board of exterior grade 35 mm thick,single leaf conforming to IS:12406/1989 with 35x12 mm T.W.Lipping on all edges with necessary adhesives and CP screws complying with standard specifications. The rate is inclusive ofthreee coats of best quality varnish but excluding cost of furniture fittings.such as 300 mm tower bolt 2nos,200mm towerbolt I no. 300mm Aldrop 1 No. Alu handle ornamental type 2 Nos,and 1 No. Door stopper etc complete. |
| 15 | Supplying and fixing in Position of Indian Oriya pan type water closet with “P’’ or “S’’ trap to set inbrick jelly concrete 1:4:8 Mix concrete 10 cm thick using 20mm brick jelly and top finished with c.m. 1:3 mix 20mm thick without any leakage etc. complete. |
| 16 | Supplying and fixing in position colour glazed EUROPEAN WATER CLOSET with \"P\" or \"S\" trap and double flapped seat cover, 12.50 litres capacity P.V.C. low level FLUSHING TANK including all internal fittings fixed on C.I. brackets, 12mm PVC or brass nipple, chromium plated brown headed stopcock, 12mm nylon connection with necessary teakwood plugs, clamps, screws to the portion coming with walls and floors, including dismantling masonry and redoing the same to the original condition. |
| 17 | Laying the Flooring withAnti skid coloured ceramic tiles of sizes 305mm X305mm X 6mm size of approved make and quality and colour l Set in cement mortar 1:3 (one cement ,three sand) over 20 mm base layer plastering and pointing with white cement neatly as directed. |
| 18 | Dadoing walls withGlazed tiles of sizes 305mm X200mm X 6mm size of approved make and quality and colour l Set in cement mortar 1:2 (one cement ,two sand) over 10 mm base layer plastering and pointing with white cement neatly as directed. |
| 19 | Supply and delivery and fixing of HDPE tank as per IS 12701 / 1996 including loading, unloading, transportation and labour charges for fixing of the GI pipes and specials for pipe connection works including cutting, threading and fixing charges etc., |
| 20 | Wiring with 2 x 22/0.3mm PVC insulated multistrand copper conductor cable of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories in flush with wall and covered with hylum sheet of 3mm thick with TW switch box and making good of the concealed portion with suitable colour for PVC concealed light point( 5 points / coil) (DATA-A) SD 20 |
| 21 | LED INDOOR FITTINGS (LIGHT EMITTING DIODE) 24W LED 4000K 2 x 2 Square Type Recessed Fitting with LED |
| 22 | Supply and fixing of 1200mm (48\") AC ceiling fan complete with stepped electronic 300W regulator with 1 meter down rod on the existing clamp |
| 23 | Supply and fixing of WT bulk head fitting with guard suitable for 11W CFL lamp with CFL (SD 83) |
| 24 | Supplying and fixing of LED bulb with connecting and soldring wire properly and suitable capability condenser and curved sheet with labour charges etc.., complete |
| 25 | Supply and fixing of 5A / 15A 3 pin combined flush type wall socket with 15A flush type switch concealed in suitable MS box in flush with wall and covered with 3mm thick hylem sheet (SD 137) |
| 26 | Supply and fixing of 3 Nos. 5A (3 pin and 2 pin) combined flush type wall socket with control switches concealed in suitable TW box covered with hylem sheet in flush with wall with earth connection (for computer plug socket) (SD 139) |
| 27 | Painting two coats with ready mixed Plastic Emulsion Paint approved quality and colour over a priming coat, including thorough scrapping, clean removal of dirt, etc complete and including necessary plaster of paris, putty, wherever required etc, complete as per standard specification. |
| 28 | Painting one coats over the old wood work using ready mixed enamel paint including cost of all materials to site and all labour charges for mixing applying etc., Complete as per Standard Specifications |
| 29 | Supply and delivery of following Pipe and specials etc., complete.-110mm dia PVC Pipe |
| 30 | 110mm dia PVC Elbow |
| 31 | PVC Tee110mm dia |
| 32 | PVC Bend 110mm dia |
| 33 | 25mm dia GI Pipe |
| 34 | 32mm dia GI Pipe |
| 35 | 25mm dia Pipe Elbow |
| 36 | 32mm dia Pipe Elbow |
| 37 | 25mm dia Pipe Tee |
| 38 | 32mm dia Pipe Tee |
| 39 | 25mm GM Gate valve |
