Strengthening Of Veterinary Health Care Infrastructure Through Construction Of Veterinary Dispensary At Kalyanpur. /Construction Of Building For Vety. Dispensary In/C. Doctor/ Staff Room With Lavatory, Dispensing Room, Medicine Store, Small Laboratory, An
Tender Value
3.58 Lakhs
Estimated cost
Bid Submission
06 Jul 2023
0 days left
EMD
7162
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
kalyanpur → Tripura
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Strengthening Of Veterinary Health Care Infrastructure Through Construction Of Veterinary Dispensary At Kalyanpur. / Construction Of Building For Vety. Dispensary In / C. Doctor / Staff Room With Lavatory, Dispensing Room, Medicine Store, Small Laboratory, Animal Shed. / Sh. Building Portion Including Internal Water Supply And Sanitary Installations. [ Phase-I, Ground Floor And Part Of First Floor ] .” / Sh: Providing Internal Electrification Of [ Phase-I, Ground Floor And Part Of First Floor ] Thereof
BOQ
| Sl. No. | Item Description |
| 1 | Wiring for light / fan / exhaust fan / call bell point with 2 x1.5 sq. mm pvc insulated Copper conductor cable (FR) in pvc casing and capping complete with 6/10 amps modular type switch, cover plate, surface modular switch board including connection etc as required.(TSR (IE)2021 SL.No.201) |
| 2 | Short point |
| 3 | Medium point |
| 4 | Long point |
| 5 | Providing and fixing of 3 pin 6/10 amps plug point withmodulartype 6/10ampsswitch andsocketincludingconnectionwith 2x1.5 sq. mm PVC insulated Copper conductor cable (FR) on surface modularswitch board, earthing the 3rd pin etc. as required:-(As per TSR 2021, Sl- 203) |
| 6 | Providing and fixing of 3/6 pin 16/20 amps plug point withmodulartype 16/20ampsswitch andsocketincludingconnectionwith 2x2.5 sq. mm PVC insulated Copper conductor cable(FR) on surface modular switch board, earthing the 3rd pin etc. as required:-(As per TSR 2021, Sl- 204) |
| 7 | Wiring for circuit /Sub-main with following sizes PVC insulated copper conductor cable (FR) in PVC casing and capping etc. as required. (TSR (IE)2021 SL.No.205) |
| 8 | 2 x 1.5 sq.mm |
| 9 | 2 x 2.5 sq.mm |
| 10 | 2 x 4 sq.mm |
| 11 | 4 x 6 sq.mm |
| 12 | Wiring for Circuit/Sub-main with the following sizes of PVC insulated Copper conductor cable (FR) in existing PVC casing capping/ conduit in recess/surface including connection etc. as required:- (As per TSR 2021, Sl.no.503) |
| 13 | 1 X 1.5 sq mm |
| 14 | 1 X 2.5 sq mm |
| 15 | Earthing with 40 mm dia G.I. Earth pipe (medium gauge) 4.5 m. long complete with masonry enclosure on top CI cover plate size 12\"x 12\" having locking arrangement including CC work, holes on earth pipe etc. as required.(As per TSR 2021 Sl- 701) |
| 16 | Extra for using salt (12 kg) and charcoal (96kg) for plate earth electrode as required.(As per TSR 20321, Sl- 702) |
| 17 | Proving and fixing / drawing of 4.06 mm dia (8 SWG) G.I. wire on surface or in existing G.I/ PVC/ Polythene pipe for loop earthing as required. (As per TSR 2021, Sl- 706) |
| 18 | Providng and laying 15mm dia(medium gauge) G.I. pipe for drawing of4.06mm (8SWG) dia G.I./ Copper wire forearth connection from earth electrodes etc as required:-(As per TSR 2021, Sl- 710) |
| 19 | Supplying and installation of Switch disconnector fuse unit (main switch) of the following ratings with all accessories including necessary connection etc. as required.(TSR (IE)2021 SL.No.1202) |
| 20 | 32 amps 415 volts TPN main switch (rewireable) |
| 21 | Supplying and installation of Bus bar chamber of the following ratings and sizes made of steel sheet enclosure with all accessories including necessary connection etc. as required.(TSR(IE)2021 SL.No.1201) |
| 22 | 32 amps 415 volts four strip Copper busbar chamber 4 ways of size (300mmx240mmx80mm) |
| 23 | Supplying and installation of powder coated steel sheet enclosure (MCB DB) suitable for 240/415 volts MCB/Isolator/RCCB (SP/SPN/DP/TP/TPN/FP) complete with necessary bus bar, neutral link, din rail, earth bar etc i/c connectionas required:-(TSR-2021, SL-1208) |
| 24 | 2 way SPN MCB DB (single door) |
| 25 | (2+10) / 12way SPN MCB DB (single door) |
| 26 | Supplying & installation of 10 KA breaking capacity, B/C curve MCB of following ratings in the existing MCB DB including connectionas required:-(TSR-2021, SL-1215) |
| 27 | 6 to 32 amps SP MCB:- |
| 28 | 6 to 32 amps DP MCB |
| 29 | Supplying & fixing of following ratings isolator in the existing MCB DB including connection etc as required:-(TSR-2021, SL-1217) |
| 30 | 40 amps DP isolator |
| 31 | Supplying of ‘U’ clamp made with 40mm x 6 mm MS flat and fixing with necessary fasten nuts including painting etc as required.( TSR (IE)2021 SL.No.1507) |
| 32 | Supplying of 25 cm long ‘L’ hook made with 40mm x 6mm MS flat and fixing with necessary fasten nuts including finishing, painting etc as required.(TSR (IE)2021 SL.No.1508) |
| 33 | Supplying and fixing of following luminaries complete withnecesaary accessories and connection etc. as required (Commercial lighting fixtures with 50,000 burning hours)(TSR(IE)2021 SL.No.1001) |
| 34 | Bulk head fittings with frosted/clear glass suitable for GLS or retrofit CFL/LED (without lamp) |
| 35 | Supplying and fixing of following surface/recess mounted LED luminaries in powder coated die cast housing complete with high efficiency polycarbonate diffuser and necessary connection etc.as required (with 50000 burning hours and minimum lumen output of 100 lm/watt) (TSR (IE)2021 SL.No.1101) |
| 36 | Surface mounted box type batten suitable for single 18/20 watt integrated LED tube lamp (without lamp) |
| 37 | Recessed/Surface mounted 1ft x 1ft decorative 16/18 watt LED panel light with integral driver and high quality polycarbonate diffuser:- |
| 38 | Supplying and fixing of following outdoor LED luminaries in powder coated die cast housing complete with heat resistant tempered glass/diffuser including necessary connection etc. as required (50000 burning hours and minimum lumen output of 100 lm/watt):-(As per TSR 2021, Sl.no.1102) |
| 39 | 45 watt LED street light fixture with integral driver and secondary lens (IP 66):- |
| 40 | Supplying and laying of the following sizes XLPE insulated PVC sheathed aluminium conductor armoured cable with necessary connection etc as required(As per TSR 2021, Sl.no-1501) |
| 41 | 40 mm dia |
| 42 | Supplying & installation of 225/230 mm sweep metalic body exhaust fan including connection etc as required:-(As per TSR 2021 Item no-816) |
| 43 | Supplying & installation of 300 mm sweep light duty metalic body exhaust fan including connection etc as required:-(As per TSR 2021 Item no-817) |
| 44 | Supplying & installation of shutter for 225/230/300 mm sweep metalic body exhaust fan in the existing hole as required:-(As per TSR 2021 Item no-817) |
| 45 | Making different sizes of hole in the wall for fixing of exhaust fan including finishing the same with cement plastering and painting etc as required.(TSR (IE)2021 SL.No.831) |
| 46 | Supplying and fixing of the following electrical accessories including necessary connection etc. as required.:-(As per TSR 2021, Sl- 604) |
| 47 | Ding dong call bell |
| 48 | 15 amps power top |
| 49 | 3mm thick bakelite sheet |
| 50 | 32 amps DP kit kat switch |
| 51 | Supplyingof 1200 mm sweep white color AC ceilingfan capacitor typedouble ball bearing complete with 300 mm down rod, canopies, shackles, 3nos blades (Without regulator) (ISI marked, BEE 1star/minimum service value 4.0m3/min/W:-(As per TSR 2021 Item no-805) |
| 52 | Supplying and fixing of the following modular accessories including necessary connection etc. as required.(TSR (IE)2021 SL.No.609) |
| 53 | 5 step fan regulator (2M) |
| 54 | Supplying and fixing of Copper terminal ends (LUGS) - long barrel of following sizes.(TSR (IE)2021 SL.No.1402) |
| 55 | 2.5 sq mm |
| 56 | 4 sq mm |
| 57 | 6 sq mm |
| 58 | Supplying and fixing of the following sizes PVC conduit (medium gauge) on surface with all accessories etc. as required.(TSR (IE)2021 SL.No.602) |
| 59 | 25 mmdia |
| 60 | Supplying and fixing of following accessories for LED luminaries including necessary connection etc. as required:--(As per TSR 2017, Sl- 1103 ) |
| 61 | 18/20 watt LED tube with integral driver and polycarbonate diffuser (50000 burning hours and minimum lumen output of 100lm/watt) |
| 62 | 14 watt LED retrofit lamp with polycarbonate body and aluminium heatsink |
| 63 | Supplying and fixing of the following sizes wooden switch boards with 3mm thick bakelite cover etc. as required.(TSR (IE)2021 SL.No.605) |
| 64 | 102mm x 178mm (4\" X 7\") |
| 65 | 152mm x 203mm (6\" X 8\") |
| 66 | 254mm x 300mm (10\" x 12\") |
| 67 | Supplying and installation of fuse unit kitkat/HRC/HBC of the following ratings in existing main switch/panel board including necessary connection etc as required.(TSR (IE)2021 SL.No.1203) |
| 68 | 32 amps kitkat porcelain fuse unit with base (rewireable) |
| 69 | Supplying and fixing of thermoplastic cable junction box with connectors suitable for following sizes cable : -(TSR (IE)2021 SL.No.1405) |
| 70 | 1.5 sqmm - 4 sqmm Cable:- |
AI Tender Summary
Tender Timeline
Jun 16, 2023
11:30 IST
Tender Published
Tender notice published.
CompletedJul 06, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJul 07, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender