Tender For 15Th Finance Tied 1St Instalment
Tender Value
2 Lakhs
Estimated cost
Bid Submission
23 Jun 2023
0 days left
EMD
2000
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
naranammalpuram → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
15Th Finance Tied 1St Instalment Construction Of Disabled Toilet Near Town Panchayat Kalyana Mandapam In Naranammal Puram Town Panchayat.
BOQ
| Sl. No. | Item Description |
| 1 | Earth work excavation for foundation in Hard stiff clay, stiff black cotton, hard red earth, shales murram, gravel,stoney earth and earth mixed with small size boulders SS.20B and Sand,silt or other loose soil,wet sand,or silt not under water, light black cotton soil, sandy loam ordinary soil and to full depth as may bedirectedexceptinhardrockrequiring blastinginclusive of shoring shuttering, ,and baling out water and cleaning and levelling the site etc.,complete 10 m3 |
| 2 | Plain Cement concrete of mix 1:4:8 (One cement four M-sand and eight aggregates) using 40mm gauge hard broken including cost conveyance of all materials to site including labour charges, transporting and placing in position including shoring, strutting |
| 3 | Supplying & Erecting centering for sides & soffiots including necessary supports & strutting upto 3.29m height for plane surfaces in all floors with all cross bracings using mild steel sheets of size 90 x 60cm & 10 gauge stiffened, welded with steel Plinth beam |
| 4 | Supplying & Erecting centering for sides & soffiots including necessary supports & strutting upto 3.29m height for plane surfaces in all floors with all cross bracings using mild steel sheets of size 90 x 60cm & 10 gauge stiffened, welded with steelslab |
| 5 | Reinforced Cement Concrete 1:1½:3 Mix (One part cement, one and half part sand and three part of aggregate)using 20mm size ISS HBG metal machine crushed from approved quarry including cost and conveyance of all materials to site, loading and unloading charges and labour charges for mixing, laying and curing but excluding cost of reinforcement etc.Complete with std.Specifications.(Using Vibrator)TNDSS NO: 30 V, VI (S3), VII-3. |
| 6 | SupplyingandFabrication of Steel and placing in position TMT rod Grills for RCC works as per design given including cost of steel and GI binding wire in Floors etc,. Complete complying with standard specification in force and as directed by department |
| 7 | Manufacturing, Supplying and Fixing of Stainless Steel Handrails for staircase near wet riser using 50mm dia 304L GradeStainless Steel pipe of 1.60mm thick will be provided withtubular supports made of 304L Grade Stainless Steel pipe of25mm dia of 1.60mm thick welded to the railing. Thesupports will be grouted into the wall and provided with93.00mm thick Stainless Steel circular base plate of 304Grade. The rate shall included for grouting into concrete withnecessary supporting arrangements the hand rail in floorpolishing buffing, bonding, cutting, grinding, conveyance,welding charges, electrical charges, etc. complete |
| 8 | Brick Work in CM 1:5 (One part of cement & five parts of M - sand) mix using Third Class Country Brick Kiln Burnt bricks 8 ¾ \" x 4 ¼ \" x 2 ¾\" including cost and conveyance of materialsto work site and including all labour charges for mixing, laying, cur |
| 9 | Plastering with CM 1:5(One part of cement & five parts of sand) mix for 12mm thick including cost and conveyance of all materialsto work site and including all labour charges for mixing, laying, curing,finishing etc., complete as per standard specific |
| 10 | Special Ceiling Plastering with CM 1:3 (One part of cement & three parts of sand)mix for 10mm thick including cost and conveyance of materials to work site and including all labour charges for mixing, laying, curing,finishing etc., complete as per standar |
| 11 | Painting two coats with ready mixed Plastic Emulsion Paint S.I.358 Plastic emulison paint of\"approved quality and colour over a priming coat, including thoroughscraping, clean removal of dirt, etc complete and including necessary plaster of paris, putty |
| 12 | Paving the floor with design Antiskirt ceramic tiles (colour and shade as directed) of size 305 mm x 305mm x 6 mm in all floors over a base layer of cement mortar 1:3 (one cement and three sand ) 20mm thick laid in-situ and pointed with same coloured cement |
| 13 | Dadooing the walls with glazed tiles of 30 c.m x 20 c.m 6mm size laid in cement mortor 1:2 mix 10mm thick and pointing with 0.40 kg white cement per m2 etc. |
| 14 | Finishing the top of roof with one course of machine pressed tiles 23 C.m x 23 C.m x 2 C.m size using cement mortor 1:3 mix mixed with 2% by weight of Crude Oil and pointing with Cement Mortor 1:3 mix Cost of all materials and labour charges and brick jelly concrete etc., complete as per standard specifications. |
| 15 | Fabricating, supplying and fixing in positon of SOLID UPVC DOORS with frames of different sizes as per the specifications given below: PVC door frames made out of best quality PVC extruded section of 40mm * 58 mm * 2.50 mm +/- 0.3 mm thick, having multichamber cross section and duly reinforced with steel to be mitre cut at the corners and welded including providing tie rod at the bottom and necessary weather seal etc., and PVC door shutters made out of extruded plastic section of 60 mm * 24 mm size in the configruation of an \"A\" section for shutter frames and multi-chamber hollow plastic section of 200 mm *200 mm*1 mm (average thickness) with tongue and groove section for panels etc., with necessary holdfasts, rubber beedings, furniture fittings, locking arrangements etc., complete including dimantling the masnery, making chippings, holes in the RCC column, beam etc., wherever necessary with power drill to the extent required and redoing the same to the original condition after fixing etc., complete as per specifications and as directed by the departmental officers. |
| 16 | Supplying and fixing RCC Pre cast slab in RCC 1:1 1/2:3 mix including cost of reinforcement grill but including moduling, finishing watering curing and fixing in position etc., Complete as per std., Specifications., |
| 17 | Supplying, Delivery of PVC pipes and specialsincluding cost and conveyance of all material to site and all other labour charges for fixing etc., Complete.3/4\" PVC pipe |
| 18 | Supplying, Delivery of PVC pipes and specialsincluding cost and conveyance of all material to site and all other labour charges for fixing etc., Complete. 3/4\"PVC.Elbow |
| 19 | Supplying, Delivery of PVC pipes and specialsincluding cost and conveyance of all material to site and all other labour charges for fixing etc., Complete. 3/4\" PVC Tee |
| 20 | Supplying, Delivery of PVC pipes and specialsincluding cost and conveyance of all material to site and all other labour charges for fixing etc., Complete. 3/4\"x1/2\" PVC Reducer |
| 21 | Supplying, Delivery of PVC pipes and specialsincluding cost and conveyance of all material to site and all other labour charges for fixing etc., Complete.1/2\" PVC pipe |
| 22 | Supplying, Delivery of PVC pipes and specialsincluding cost and conveyance of all material to site and all other labour charges for fixing etc., Complete.1/2\" PVC elbow |
| 23 | Supplying, Delivery of PVC pipes and specialsincluding cost and conveyance of all material to site and all other labour charges for fixing etc., Complete.1/2\" S.S Nalli |
| 24 | Provision for sanitary pipes and specials including cost and conveyance of all material to site and all other labour charges for fixing etc., Complete. 4\" PVC Pipe |
| 25 | Provision for sanitary pipes and specials including cost and conveyance of all material to site and all other labour charges for fixing etc., Complete.4\"PVC Elbow |
| 26 | Provision for sanitary pipes and specials including cost and conveyance of all material to site and all other labour charges for fixing etc., Complete.4\" PVC Tee |
| 27 | Supply and Fixing of Electrical specials including Cost & Conyance etc Complete 9watts bulb |
| 28 | Supply and Fixing of Electrical specials including Cost & Conyance etc CompleteLight point SD18 |
| 29 | Supply and Fixing of Electrical specials including Cost & Conyance etc Complete Service pipe |
| 30 | Supply and Fixing of Electrical specials including Cost & Conyance etc Complete 16Amp 240 V mains |
| 31 | Supply and Fixing of Electrical specials including Cost & Conyance etc Complete Service wire |
| 32 | Supply and Fixing of Electrical specials including Cost & Conyance etc Complete 4feet LED Tube light fitting |
| 33 | Supplying and fixing in position best Indian make white glazed earthenware WASH HAND BASIN of 560x406mm with a a pair of C.I. Brackets, 15mm dia C.P. Pillar tap, 32mm G.I. Waster water pipe, 32mm dia C.P. Brass waster coupling, plug with chain, 15mm dia PVC connection, 15mm G.M. wheel valve with ISI mark and necessary G.I. union and G.I. Elbow, including fixing wash hand basin in position with white lead, clamps, teakwood plugs, screws, rubber washer etc., complete without any leakage complying with standard specifications. |
| 34 | Supplying and fixing in position best Bevelled Edge MIRROR of 6mm thick of size 50cm x 40cm fibre glass shelf type with necessary plywood backing and rubber button, chromium plated screws, teakwood plugs, etc., complete complying with standard specification and as directed by the departmental officers. |
AI Tender Summary
Tender Timeline
Jun 16, 2023
11:30 IST
Tender Published
Tender notice published.
CompletedJun 23, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJun 23, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender