Tender For Upgradation Of Halam Basti Hsc To Health And Wellness Center Under R.D. Jubarajnagar Sub Division (Nhm).
Tender Value
6.91 Lakhs
Estimated cost
Bid Submission
30 Jun 2023
0 days left
EMD
13836
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
North Tripura → Tripura
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Upgradation Of Halam Basti Hsc To Health And Wellness Center Under R.D. Jubarajnagar Sub Division ( Nhm ) . Upgradation Work
BOQ
| Sl. No. | Item Description |
| 1 | 2.1 Clearing jungle including uprooting of rank vegetation,grass, brush wood, trees and saplings of girth upto 30 cmmeasured at a height of 1 m above ground level andremoval of rubbish upto a distance of 50 m outside theperiphery of the area cleared. |
| 2 | 2.13 Earth work in excavation by mechanical means (Hydraulicexcavator) / manual means in foundation trenches ordrains (not exceeding 1.5 m in width or 10 sqm on plan)including dressing of sides and ramming of bottoms, liftupto 1.5 m, including getting out the excavated soil anddisposal of surplus excavated soil as directed, within a leadof 50 m.-All kinds of soil |
| 3 | 2.12 Earth work in excavation by mechanical means (Hydraulicexcavator) / manual means over areas (exceeding 30cm indepth, 1.5m in width as well as 10 sqm on plan) includingdisposal of excavated earth, lead upto 50m and lift upto1.5m, disposed earth to be levelled and neatly dressed.-All kinds of soil |
| 4 | 2.16 Filling available excavated earth (excluding rock) intrenches, plinth, sides of foundations etc. in layers notexceeding 20cm in depth, consolidating each depositedlayer by ramming and watering, lead up to 50 m and liftupto 1.5 m.-All kinds of soil |
| 5 | 2.19 Supplying and filling in plinth, under floor, foundations etc.with sand (fine) from local quarry with all lifts includingspreading in horizontal layers, watering, grading torequired slope, ramming, consolidating and compactingeach layer by using plate compactor or by any suitablemethod complete. |
| 6 | 4.1 Providing and laying in position cement concrete ofspecified grade excluding the cost of centring andshuttering --All work upto plinth level:4.1.14 1:3:6 ( 1 Cement: 3 fine sand : 6 graded well burnt brick aggregate 40 mm nominal size) |
| 7 | 4.1.15 1:4:8 ( 1 Cement: 4 fine sand : 8 graded well burntbrick aggregate 40 mm nominal size) |
| 8 | 4.4 Centering shuttering including struttings, proppingetc. and removal of form work for:4.4.1 Foundations, footings, bases for columns. |
| 9 | 4.17 Making plinth protection 50mm thick of cementconcrete 1:3:6 (1 cement : 3 fine sand : 6 graded wellburnt brick aggregate 20 mm nominal size) over75mm bed of dry brick ballast 40mm nominal sizewell rammed and consolidated and grouted with finesand including finishing the top smooth. |
| 10 | 5.3 Reinforced cement concrete work in beams, suspendedfloors, roofs having slope upto 15° landings, balconies,shelves, chajjas, lintels, bands, plain window sills,staircases and spiral stair cases upto floor five levelexcluding the cost of centring, shuttering, finishingand reinforcement-5.3.2 1:1½:3 ( 1 Cement: 1½ fine sand : 3 graded stoneaggregate 20 mm nominal size) |
| 11 | 5.20 Reinforcement for R.C.C. work including straightening,cutting, bending, placing in position and binding allcomplete above plinth level.5.20.4 Thermo-Mechanically Treated bars of grade Fe-500D or more |
| 12 | 5.8.12.1 Edges of slabs and breaks in floors and walls under 20cm. wide |
| 13 | 5.8.4.2 Suspended floors, roofs, landings, balconies and access platform with 12 mm thick shuttering ply |
| 14 | 6.1 First class brick work in foundation and plinthincluding cost of all materials as required complete:-6.1.5 In cement mortar 1:6 ( 1 cement : 6 fine sand ). |
| 15 | 6.10 Half brick masonry work with first class bricks infoundation and plinth including cost of all materials asrequired complete:-6.10.3 In cement mortar 1:4 ( 1 cement : 4 fine sand ). |
| 16 | 16.3 Providing and fixing glazing of approved quality inaluminium doors, windows, ventilator, shutters andpartition etc. with EPDM rubber / neoprene gasket etc.complete as per architectural drawing and the directionof Engineer-in-charge (Cost of snap beading shall be paidin basic item) :-16.3.1 With float glass panes of 4.0 mm thickness ( weight notless than 10.0 kg / sqm ) |
| 17 | 16.1 Providing and fixing aluminium work for doors,windows, ventilators and partitions with extruded builtup standard tubular sections/ appropriate Z sectionsand other sections of approved make conforming toIS: 733 and IS : 1285, fixing with dash fasteners ofrequired dia and size, including necessary filling up ofgaps at junctions, i.e. at top, bottom and sides withrequired EPDM rubber/neoprene gasket etc. Aluminiumsections shall be smooth, rust free, straight, mitred andjointed mechanically wherever required including cleatangle, aluminium snap beading for glazing / paneling,C.P. brass / stainless steel screws, all complete as perarchitectural drawing and the direction ofEngineerincharge.(Glazing and paneling and dashfasteners to be paid for separately) :-16.1.1 For fixed portion of approved quality:-16.1.1.1 Anodised aluminium (anodised transparent or dyed torequired shade according to IS: 1868, Minimum anodiccoating of grade AC 15). |
| 18 | 16.1.2 For shutters of doors, windows & ventilators includingproviding and fixing hinges / pivots and makingprovision for fixing fittings wherever required includingthe cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately ):-16.1.2.1 Anodised aluminium (anodised transparent or dyed torequired shade according to IS: 1868, Minimum anodiccoating of grade AC 15). |
| 19 | 8.1 Providing wood work in frames of doors, windows,clerestory windows and other frames, wroughtframed and fixed in position :8.1.3 Local Teak Wood |
| 20 | 8.4 Providing wood work in frames of false ceiling,partitions etc. sawn and put up in position :8.4.3 Local Teak Wood |
| 21 | 8.5 Providing and fixing panelled / or panelled andglazed shutters for doors, windows and clerestorywindows including ISI marked bright finished /black enamelled M.S butt hinges with necessaryscrews excluding panelling and or glazing, whichwill be paid for separately but including the woodenbeading of 20 × 12 mm for fixing panelling and orglazing as per direction of Engineer-In-Charge.8.5.1 Local Teak wood8.5.1.2 30 mm thick shutters |
| 22 | 8.6 Providing and fixing panelling or panelling andglazing in panelled or panelled and glazed shuttersfor doors, windows and clerestory windows (Area ofopening for panel inserts excluding portion insidegrooves or rebates to be measured). Panelling forpaneled or paneled and glazed shutters 25 to 40 mmthick.8.6.1 Local Teak Wood 16 mm thick |
| 23 | 8.51 Providing 40 × 5 mm flat iron hold fast 40 cm longincluding fixing to frame with 10 mm diameter bolts,nuts and wooden plugs and embedding in cementconcrete block 30 × 10 × 15 cm 1:3:6 mix |
| 24 | 8.120 Providing and fixing factory made door frame (singlerebate) made of solid PVC foam profile withhomogenous fine cellular structure having smoothouter integral skin having 60mm width & 30mmthickness and shall be fixed to wall as perinstructions of Engineer-In-Charge using 100x8 sheetmetal CSK screws. |
| 25 | 8.121 Providing and fixing 28 mm thick door shutter madeof solid PVC foam profile with homogenous finecellular structure having smooth outer integral skinhaving 71mm width & 28mm thick as vertical &horizontal styles. Joints are made using solventadhesive and GI ‘C sections (39mm x 19mm x 0.6mmthick) or M S pipe (40mm x 20mm ) stiffener frameinsert & telescopic polymeric ‘L’ corners .The panelshall be filled with 3mm thick high - pressurecompact laminate as per manufacturer’sspecifications and directions of the Engineer-incharge,cover moulding shall be provided forcovering fixing screws and elegant look.( for W.C.bathroom door shutter). |
| 26 | 8.94 Providing and fixing aluminium sliding door bolts ISImarked anodised (anodic coating not less than gradeAC 10 as per IS : 1868) transparent or dyed torequired colour or shade with nuts and screws etc.complete :8.94.1 300x16 mm |
| 27 | 8.95 Providing and fixing aluminium tower bolts ISImarked anodised (anodic coating not less than gradeAC 10 as per IS : 1868 ) transparent or dyed torequired colour or shade with necessary screws etc.complete :8.95.1 300x10 mm |
| 28 | 8.98 Providing and fixing aluminium handles ISI markedanodised (anodic coating not less than grade AC 10as per IS : 1868) transparent or dyed to requiredcolour or shade with necessary screws etc. complete :8.98.1 125 mm |
| 29 | 8.46 Providing and fixing M.S. grills of required pattern inframes of windows etc. with M.S. flats, square orround bars etc. all complete.8.46.2 Fixed to openings /wooden frames with rawl plugsscrews etc. |
| 30 | 10.38A Providing and fixing rectified glazed wall tiles 300 x 450mm or more conforming to IS : 15622 - 2017 ( thicknessto be specified by the manufacturer ) of approved makein all colours, shades of any size as approved byEngineer-in-charge in skirting, risers of steps and dados,laid over 12 mm thick bed of cement mortar 1 : 3 ( 1cement : 3 fine sand ) jointed with ordinary cementslurry including pointing with white cement mixed withpigment of matching shade complete. |
| 31 | 10.39 Providing and laying ceramic floor tiles in different sizes(thickness to be specified by the manufacturer) of 1stquality conforming to IS : 15622 - 2017 of approvedmake in colours such as White, Ivory, Grey, Fume RedBrown, laid over 20 mm thick cement mortar 1:4 (1cement : 4 fine sand), Jointing with grey cement slurry @3.3 kg/sqm including pointing the joints with whitecement and matching pigment etc. complete.10.39.1 Anti-Skid Tiles10.39.1.1 Ceramic Tiles 1st quality 300 x 300mm in all shades anddesigns |
| 32 | 10.25 Providing and fixing chequered terrazo tiles 22 mm thickwith graded marble chips of size upto 6 mm, laid onfloors, footpath & courtyard on 20 mm thick bed ofcement mortar 1 : 4 ( 1 cement : 4 fine sand ) jointed withneat cement slurry mixed with pigment to match theshade of tiles including rubbing and polishing complete.10.25.1 Light shade pigment using white cement |
| 33 | 10.42 Providing and laying vitrified floor tiles in different sizes(thickness to be specified by the manufacturer) withwater absorption less than 0.08% and conforming to IS:15622 - 2017, of approved make, in all colours andshades, laid over 20mm thick cement mortar 1:4 (1cement : 4 fine sand), jointing with grey cement slurry @3.3 kg/ sqm including grouting the joints with whitecement and matching pigments etc., complete.10.42.2 Double charged Stainfree vitrified tiles10.42.2.1 Size of tile 60x60 cm |
| 34 | 9.12 Steel work in built up tubular (round, square orrectangular hollow tubes etc.) trusses etc., includingcutting, hoisting, fixing in position and applying apriming coat of approved steel primer, including weldingand bolted with special shaped washers etc. complete.9.12.1 Hot finished welded type tubes |
| 35 | 9.3 Providing and fixing in position collapsible steel shutterswith vertical channels 20x10x2mm at 100 mm centre tocentre and braced with flat iron diagonals 20x5mm sizewith top and bottom rail of T-iron 40x40x6mm with40mm dia. steel pulleys & with riveted bolts, nuts,locking arrangement, stoppers, handles, hold fast/anchor bolt including embedding in cement concrete ofrequired grade for fixing in position, all necessaryfittings, including applying a priming coat of approvedsteel primer etc. complete as required. |
| 36 | 12.1 12 mm cement plaster of mix12.1.4 Cement mortar 1:6 (1 cement : 6 fine sand) |
| 37 | 15 mm cement plaster on the rough side of single orhalf brick wall of mix:12.2.4 Cement mortar 1:6 (1 cement : 6 fine sand) |
| 38 | 12.4 6 mm cement plaster of mix :12.4.1 Cement mortar 1:3 (1 cement : 3 fine sand) |
| 39 | Neat Cement Punning |
| 40 | 12.47 Painting with synthetic enamel paint of approved brandand manufacture to give an even shade [Payment shallbe made after submission of Test Certificate issued bythe Manufacturer]:12.47.1 Two or more coats on new work |
| 41 | 13.39 Finishing walls with textured exterior paint of requiredshade of approved brand and manufacture on old work( one or more coats ) including preparation of surfaceas required complete as per direction of the Engineer incharge. |
| 42 | 13.33 Removing white or colour wash by scrapping and sandpapering and preparing the surface smooth includingnecessary repairs to scratches etc. complete |
| 43 | 13.40 Finishing walls with acrylic smooth exterior paint ofrequired shade of approved brand and manufacture onold work ( one or more coats ) including preparation ofsurface as required complete as per direction of theEngineer in charge. |
| 44 | 13.30 Repairs to plaster of thickness 12 mm to 20 mm inpatches of area 2.5 sqm and under including cutting thepatch in proper shape and preparing and plastering thesurface of the walls complete including disposal ofrubbish to the dumping ground with all leads and liftsincluding finishing even and smooth and curingcomplete as per direction of the Engineer in charge:-13.30.2 With cement mortar 1:4 ( 1 cement : 4 fine sand ). |
| 45 | 14.22 Dismantling GS sheet roofing including ridges, hips,valleys, gutters wind ties etc. includingdismembering and stacking of serviceable materialsand unserviceable materials separately with all liftsand upto a lead of 50 m etc.complete as perdirection of the Engineer- in-charge. |
| 46 | 11.1 Providing corrugated G.S. sheet roofing includingvertical/curved surface fixed with polymer coated Jor L hooks, bolts and nuts 8 mm diameter withbitumen and G.I. limpet washers or with G.I. limpetwashers filled with white lead and including a coatof approved steel primer and two coats of approvedpaint on overlapping of sheets complete (up to anypitch in horizontal/ vertical or curved surfaces)excluding the cost of purlins, rafters and trusses andincluding cutting to size and shape wherever required.11.1.2 0.63mm thick with zinc coating not less than 275gm/m2 |
| 47 | 11.4 Providing ridges or hips of width 60 cm overall widthplain G.S. sheet fixed with polymer coated J or L hooks,bolts and nuts 8 mm dia G.I. limpet and bitumenwashers complete.11.4.2 0.63mm thick with zinc coating not less than 275gm/m2 |
| 48 | 11.15 Supply & installation of pre-painted Galvalume sheetsfor roofing/cladding (size, shape and pitch ofcorrugation as approved by Engineer-in-charge) in550mpa steel grade, made out of Cold Rolled Steelcoated with Zinc-Aluminium alloy coating of 43.5% Zn,55% Al and 1.5% Silicon confirming to ASTMA792/A792M and AS1397, Alloy coating AZ150/AZ70,colour coated with high quality Polyester coating, topcoated of modified polyester of 20 micron, back sidecoat of 5 micron, having epoxy primer coat of 5 micronon both side. Sheet should have protective guard filmof 25 microns minimum to avoid scratches whiletransportation and should be supplied in singlelength upto 12 metre or as desired by Engineer-incharge.The sheet shall be fixed using self drilling/self tapping screws of size (5.5x 55mm) with EPDMwashers filled with white lead complete upto anypitch in horizontal/ vertical or curved surfacesexcluding the cost of purlins, rafters and trusses andincluding cutting to size and shape wherever required.11.15.1 0.40mm thickness |
| 49 | 11.19 Providing and fixing plain Multipurpose Cement board(High Pressure steam cured) as per IS : 14862 :2000 with suitable screws for fibre cement board inceiling etc. complete (frame work to be paid separately) :11.19.1 6 mm thick cement board |
| 50 | 18.7 Providing and fixing wash basin with C.I. brackets, 15mm C.P. brass pillar taps,32 mm C.P. brass waste ofstandard pattern, including painting of fittings andbrackets, cutting and making good the wallswherever require :18.7.1 White Vitreous China Wash basin size 630x450 mm with apair of 15 mm C.P. brass pillar taps |
| 51 | 18.7.9 White Vitreous China Surgeon type wash basin of size660x460 mm with single 15 mm C.P. brass pillar taps withelbow operated levers ISI marked. |
| 52 | 18.32 Providing and fixing mirror of superior glass (ofapproved quality) and of required shape and size withplastic moulded frame of approved make and shade with6 mm thick hard board backing :18.32.4 Rectangular shape 1500x450 mm |
| 53 | 18.33 Providing and fixing 600x120x5mm glass shelf withedges round of supported on anodised aluminium angleframe with C.P. brass brackets and guard rail completefixed with 40 mm long screws, rawl plugs etc., complete. |
| 54 | 18.73.2 600mm long towel rail with total length of 645mm, width78mm and effective height of 88mm, weighing not lessthan 190gms. |
| 55 | 18.83 Providing and fixing on wall face unplasticised RigidPVC rain water, soil, waste & vent pipes (workingpressure 6 kg / cm2) conforming to IS : 13592 Type Aincluding jointing with seal ring conforming to IS :5382 leaving 10 mm gap for thermal expansion:18.83.1 Single socketed pipe - 110 mm OD |
| 56 | 18.84 Providing and fixing on wall face unplasticised - PVCmoulded fittings/ accessories for unplasticised RigidPVC rain water, soil, waste & vent pipes pipesconforming to IS : 13592 Type A including jointingwith seal ring conforming to IS : 5382 leaving 10 mmgap for thermal expansion:18.84.1 Coupler18.84.1.2 110 mm |
| 57 | Providing hologram and other paintings complete as per the direction of Engineer-in-charge (NON SCHEDULE) |
AI Tender Summary
Tender Timeline
Jun 16, 2023
11:30 IST
Tender Published
Tender notice published.
CompletedJun 30, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJun 30, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender