Bids Are Invited For Purchase Of Raw Material For Tr, Plamber, Painter, Wd, Mmv, Smw, Ft Department For Pcmc (Q3) Total Quantity : 1, Pune-Maharashtra

Bids Are Invited For Purchase Of Raw Material For Tr, Plamber, Painter, Wd, Mmv, Smw, Ft Department For Pcmc--1 M.S round bar Φ 25 mm 2 M.S round bar Φ 20 mm 3 M.S round bar Φ 32 mm 4 M.S round bar Φ 35 mm 5 M.S round bar Φ 40 mm 6 M.S round bar Φ 45 mm 7 M.S round bar Φ 50 mm 8 M.S round bar Φ 70 mm 9 M.S round bar Φ 90 mm 10 M.S round bar Φ 100 mm 11 Alluminium bar Φ30 mm 12 Brass bar Φ30 mm 13 M.S flat 50 × 10 width 14 Cutting oil (soluble) 15 Boring tool assorted on holder (shank size 3mm) 16 Single poit (cutting tool assorled on holder) shank 15×15×100 mm 17 Drill set H.S.S (parallel shank) 4mm to 14 mm by 01 mm 18 Grinding wheel fine 250 × 25 ×31.5 V 228 19 Grinding wheel (green) 250 × 25 ×31.5 V 228 20 Right hand signal point tool cemented carbide tip assorted type (shank size 20×20×100mm) 21 ‘V’ tool signal point cemented carbide tip assorted on shank big tip size (shank size20×20×100mm 22 Safty goggle clear glass poly carborate material 500 liters capacity 23 Band saw blade mc grade (L 3000 mm×W 27mm × 0.9 Th×416 TPI) 24 Cobination drill A – 2 (centre drill) 25 Cobination drill A – 4 (centre drill) 26 Cobination drill A – 6 (centre drill) 27 CNC mc lithium Panasonic make BR 2/3 AGC14A 28 Lathe dead center mt – 3 with sleeve standerd morse taper–03 29 Flexible plastic pipe ¾” ISI mark good quality – 50 meter in length 30 Drill set parallel shank – 04mm to 12mm by 1mm – 02 set 31 Int. threading toll assorted tip on ms.shank 32 Parting tool assorted on shank 05mm tip width 33 Boaring tool assorted tip brazed on tool shank 34 Machine oil servo system 40 no – 5040 – EP – 140 No 35 Size spanner set 06mm to 24mm by 01mm – 01set 36 Dial bore gauge with mitutoyo dial haring 0.001mm least count for measuring bore 25mm to 50mm haring adjustuable three Self center shoes point to uehing 37 Portable hand drill m/c – 220volt,2700rpm, hevy duty size L44×W37×H11cm 38 Portable hand grinder 2200 Watt, 6500rpm,5300gms in weight 39 Three jaw chuck 200mm with back plate fitted to leath spindle 40 Dial test indicator with mitutoyo dial of 0.001mm LC.with magnetic base 41 Drill chuk 1 to 12mm capcity with fitted arbor & with MT – 3 having standard taper sleev with key 42 M.S square bar 40×40mm 43 Ele starter Mk – 1 for leath m/s dol starter 3 phase, ranse 6 – 10 A for 5HP moyor 44 Dial Vernier caliper 200mm with mitutoto dial L.C = 0.001mm 45 Revoling center - mores standard taper MT – 3 for leath tailstock 46 Tool post key □ 12×12mm sq. sutable for M 10 stud 47 Tool post stud small M 10×50mm Sq head 48 Tool post stud small M 12×65mm Sq head 49 Alluminum taper pin small dia – 3mm big dia = 6mm length 50mm 50 Vice machine 6” for milling machine heavy duty 51 Allumium Bar 15Φ 52 H.S.S tool bit white – ¼”× ¼” × 6” 53 Oil stone =12×12×70mm 54 TP-Link arced AC1200 Aeched C6 wi-fi speedup to 867 mbps/5HZ+300+mbps /2.4 GHZ 5 digabit parts 4 ext. antena mv – mimo dual band , wi-fi – 01Nos 55 Grinding wheel fine green 250×25×3105mm bore 56 Grinding wheel med. Grade 250×25×3105mm bore 57 Hand hacksaw blade 12”× ½”×18 TPJ H.S.S. 58 Marking block magnitic base 10” with monkyclamp 59 Sleeve mt taper std size 3 No(taper sleeve for drill) 60 Tap set of three m 6 61 Tap set of three m 8 62 Tap set of three m 10 63 Die with handel m 6 64 Die with handel m 8 65 Die with handel m 10 66 Mseal 50 gm in weight (Q3) Total Quantity : 1

Sr No	CorrigendumDate	Corrigendum	CorrigendumType	NewSubmissionDate
1	30-06-2023			04-07-2023

Refer document

Refer document

Refer document