Tender For Providing Well, Pump Room, Glsr And Pipe Line At Chathakolli (Ward No 12) In Nelliyalam Municipality
Tender Value
30 Lakhs
Estimated cost
Bid Submission
23 Jun 2023
0 days left
EMD
30000
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Nilgiris → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Providing Well, Pump Room, Glsr And Pipe Line At Chathakolli (Ward No 12) In Nelliyalam Municipality
BOQ
| Sl. No. | Item Description |
| 1 | Earth work excavation for foundation in all kinds of soils and sub soils to full depth as directed by the departmental officers except hard rockinclusive of shoring strutting and balling out water wherever necessary and refilling the sides of foundation with excavated earth in layers of 15cm thick well rammed and consolidated and depositing the surplus earth with in the compound in places shown by the departmental officers with initial lead of 10 meters and initial lift of 2 meters including cost of all labour charges etc., complete as per standard specification 23 & 24VI (S2) VII.9,10 |
| 2 | Open well excavation complying with relevant clauses of T.N.D.S.S. Well sinking and with lead upto 10 metre in Medium rock and dense medium rock not requring blasting - First depth of 2 metre complete complying with standard specifications. (PWD SOR 2021-2022) |
| 3 | First depth |
| 4 | Second depth |
| 5 | Third depth |
| 6 | Fourth depth |
| 7 | Supplying and filling with fine river sand including cost and conveyance of all materials etc., complete complying with standard specifications and as per standard specifications and as directed by the departmental officers |
| 8 | Supply and erecting centering to sides and soffits including supports and strutting up to 5.29m height for plane surface such as R.C.C. slabs Rectangular beams, Tee or Ell beams lintels bed blocks stair case waist slab and landing beams, canopy slabs with all cross bracings using 90cm x 60 cm x 3 mm B.G. 10 stiffened with welded mild steel angles of size 25 mm x 25 mm x 3 mm for boarding laid over (Silver oak joists) of size 10 cm x 6.50 spread at about 90 cm center to center and supported by the casurina props of 10 cm to 13 cm diameter at 75 cm center to center etc., complete complying with standard specifications and as directed by the departmental Engineers. |
| 9 | For Pump Room |
| 10 | For Well and GLR |
| 11 | Reinforced cement concrete in 1:11/2:3[one cement and one and half M-Sand and fourtheaggregate ] using 20 mm size IRC grade machine crushed chips and excludingcost of reinforcement and centering works and including the cost of mixing,laying , curing ,and etc.,complete complying with standard specification . |
| 12 | Supply and fabricating and placing in position of R.T.S. rods of reinforcement and including the cost of binding wire andbar bending and includingthe cost of fabrication and using the binding wire at 1 Kg per quintal etc., complete complying with standard specifications. |
| 13 | Plain Cement concrete 1:4:8 mix (one cement and four sand and eight aggregate mix using 40mm size is hard blue granite metal laying in layers of not more than 15 cm thick etc., and including cost of mixing laying, curing etc., complete complying with standard specifications and as directed by the departmental engineers. |
| 14 | Brick work in Cement mortar 1:5 (One cement and six sand) using best quality of second class bricks of size 23 x 11 x 7cm for the following including curing et., complete complying with standard specification and as directed by the departmental officers. |
| 15 | Plastering with cement mortar 1:3 (One cement and Three sand) 12mm thick with well fine screened sand etc., complete including finishing the surface and curing charges etc., complete complying with standard specification and as directedby the departmental officers. |
| 16 | Plastering with cement mortar 1:3 (One cement and Three sand) 20mm thick with well fine screened sand etc., complete including finishing the surface and curing charges etc., complete complying with standard specification and as directedby the departmental officers. |
| 17 | Supplying and fixing of MS Sheet Manhole And Lder using 18 guageMS sheet with MS \"L\"angle 40 mm x 40mm x 6mm including necessary fittings locking arrangements cutting welding revelting cost and conveyance of all materials to site and all labour charges etc., complete as per standard specification |
| 18 | Plastering with cement mortar 1:3 (One cement and Three sand) 10mm thick with well fine screened sand etc., complete including finishing the surface and curing charges etc., complete complying with standard specification and as directedby the departmental officers. |
| 19 | Plastering with cement mortar 1:5 (One cement and five sand) 12mm thick with well fine screened sand etc., complete including finishing the surface and curing charges etc., complete complying with standard specification and as directedby the departmental officers. |
| 20 | Plastering with cement mortar 1:4 (One cement and five sand) 20mm thick with well fine screened sand etc., complete including finishing the surface and curing charges etc., complete complying with standard specification and as directedby the departmental officers. |
| 21 | Supplying and fixing of MS Sheet door using 18 guageMS sheet with MS \"L\"angle 40 mm x 40mm x 6mm including necessary fittings locking arrangements cutting welding revelting cost and conveyance of all materials to site and all labour charges etc., complete as per standard specification |
| 22 | Painting two coats with ready mixed Plastic Emulsion Paint approved quality and colour over a priming coat, including thorough scrapping, clean removal of dirt, etc complete and including necessary plaster of paris, putty, wherever required etc, complete as per standard specification. - 10 sq.m |
| 23 | Painting two coats with approved iron paint over one priming coat of cement paint over cement plastered wall surface and ceiling includingcost of one priming coat, Cost of all materials, all labour charges,brushes, cleaning preparing the surface,scaffolding charges and curing chargesetc, complete as per SS. |
| 24 | Supplying and Fixing of Open Well Submersible pumpset (IS 14220) with Panel board etc., complete ( 125x225 lpm x m TWAD SOR 2022-2023 ) |
| 25 | Supplying and laying of following dia G.I Pipes as per ISI Specifications etc., Complete complying with standard specifications. |
| 26 | 50mm G.I Pipe |
| 27 | 40mm G.I Pipe |
| 28 | 32mm G.I Pipe |
| 29 | 25mm G.I Pipe |
| 30 | 20mm G.I Pipe |
| 31 | Laying and jointing the 50mm G.I Pipe\"B\" classpipe and specials etc., complete |
| 32 | 50mm to 20mm G.I. pipe |
| 33 | Supply and run of 4 of 6 sq.mm. (84 / 0.3) PVC insulated SC unsheathed copper conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with continuous earth wire connection by 14 SWG TC wire and making good of the concealed portion with suitable colour SD. :63 |
| 34 | Supply and fixing of TNEB Moter Board suitable for 3 Phases 63A service connection made up of suitable angle iron frame work of size 2 feet x 1 1/2 feet using angle iron of size1 1/2\" x 1 1/2\" x 1/4\" rigidly fixed on wall covered with hylem sheet of size 2 feet x 1/2 feet of 6mm thickness with necessarybolts and nuts supports and supply and fixing of 3 Nos 63A fuse units (500V) 1 No. Neutral link, copper earth flat of size 1\" x 1/4\" with inter connection of EB meter to fuse units by 7/16 PVC insulated copperwire with earth connection complete SD. :129 |
| 35 | THREEPHASE PANEL BOARDSTAR- DELTAWITH TWO LEVEL GUARD AND AUTO STARTSupply and delivery of Star-Delta starter confirming to IS 13947, IEC60947-1 and as amended thereafter with suitable KW rating for operation in AC/ Three Phase/50HZ (+/- 5%) and 415V (+/- 10%) including 3 pole magnetic contactor with under voltage release - 3 nos., CT operated Ammeter (65 mm dia) with suppressed scale, Voltmeter (65mm dia), Voltmeter selector switch, Miniature circuit breaker, Thermal Overload relay, Air Break contactors suitable for next Standard higher KW rating, Single phasing preventor, dry running preventor and On/Off Push button switches, wiring with 1 sq.mm/4 sq. mm copper pvc insulated cable, powder coated vermin proof box, including the capacitor (the cost of capacitor is to be taken separately). |
| 36 | (MAIN SWITCH) TRIPLE POLE SWITCHES (SIDE HANDLE) (STANDARD /HPL/HAVELLS/ EQUIVALENT) 63 Amps TPN Metal clad switch with rewirable fuse units |
| 37 | Labour charges for the erection of submersible pumpset in borewell/openwell including fixingand jointing submersible cable with properclamps upto the starter toand testing the pumpset and trail run for 10 days.earthing as per IE rules etc., complete andlaying and jointing the cables and twin phasing preventor, water level guard and three pilot (indicating) lamps capacitor singleTPICN switches starter, Voltmeter, Ammeter,and erection of panel board consisting of gauges upto the exterior wall of pump room depth valves erection clamps, pressure also fixing of riser pipes to the required required depth |
| 38 | Provision of G.I. special and scour pipes and over flows pies etc., complete |
| 39 | 50 mm Dia G.I. Coupling |
| 40 | 50 mm Dia G.I.Bend |
| 41 | 50 mm Dia G.I.Union |
| 42 | Barrel Nipple 50 mm Dia. 30.00 cm length |
| 43 | 50 mm Dia G.M. Gate Valves |
| 44 | 50 mm DiaG.I. Equal Tee |
| 45 | 50 mm DiaG.I. Equal Elbow |
| 46 | 40 mm Dia G.I. Coupling |
| 47 | 40 mm Dia G.I.Bend |
| 48 | 40 mm Dia G.I.Union |
| 49 | Barrel Nipple 40 mm Dia. 30.00 cm length |
| 50 | 40 mm Dia G.M. Gate Valves |
| 51 | 40 mm DiaG.I. Equal Tee |
| 52 | 40 mm DiaG.I. Equal Elbow |
| 53 | 32 mm Dia G.I. Coupling |
| 54 | 32 mm Dia G.I.Bend |
| 55 | 32 mm Dia G.I.Union |
| 56 | Barrel Nipple 32 mm Dia. 30.00 cm length |
| 57 | 32 mm Dia G.M. Gate Valves |
| 58 | 32 mm DiaG.I. Equal Tee |
| 59 | 32 mm DiaG.I. Equal Elbow |
| 60 | 25 mm Dia G.I. Coupling |
| 61 | 25 mm Dia G.I.Bend |
| 62 | 25 mm Dia G.I.Union |
| 63 | Barrel Nipple 25 mm Dia. 30.00 cm length |
| 64 | 25 mm Dia G.M. Gate Valves |
| 65 | 25 mm DiaG.I. Equal Tee |
| 66 | 25 mm DiaG.I. Equal Elbow |
| 67 | 20 mm Dia G.I. Coupling |
| 68 | 20 mm Dia G.I.Bend |
| 69 | 20 mm Dia G.I.Union |
| 70 | Barrel Nipple 20 mm Dia. 30.00 cm length |
| 71 | 20 mm Dia G.M. Gate Valves |
| 72 | 20 mm DiaG.I. Equal Tee |
| 73 | 20 mm DiaG.I. Equal Elbow |
| 74 | Goods & Services Tax (GST) 18% |
AI Tender Summary
Tender Timeline
Jun 15, 2023
11:30 IST
Tender Published
Tender notice published.
CompletedJun 23, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJun 23, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender