Tender For Providing And Fixing Of Office Furniture Of Standard Make That Is Godrej Or Equivalent For Office Of Gm (Administration) At Block No. 7 And 8, 4Th Floor Shakti Bhawan Rampur Jabalpur., jabalpur-Madhya Pradesh

Providing And Fixing Of Office Furniture Of Standard Make That Is Godrej Or Equivalent For Office Of Gm ( Administration ) At Block No. 7 And 8, 4Th Floor Shakti Bhawan Rampur Jabalpur.- 1 Supply And Installation Of Mid Back Revol Ving Chair Having Seat / Back Assembly: The Seat And Back Are Made Up Of 1.2 Cm. Thick Hotpressed Plywood, Upholsered With Changeable Fabric Upholstery Covers And Moulded Polyurethane Foam, Together With Seat And Back Cover. The Back Foam Is Designed With Contoured Lumber Support For Extra Comfort. Back Size: 39.0Cm. ( W ) X 47.0Cm. ( H ) , Seat Size: 45.0Cm. ( W ) X 52. 0Cm. ( D ) . Polyurethane Foam: The Polyurethane Foam Is Moulded With Density = 45 + / -2 Kg / M3 And Hardness = 20 + / -2 On Hampden Machine At 25% Compression. Armrests: The Armrests Are Made Of Black Integral Skin Polyurethane With 50-70 Shore A Hardness And Reinforced With M.S. Insert. The P.U. Armrests Are Then Fixed To Black Powder Coated Armrest Brackets Made Of 0.5 Cm.Thk. Hr Steel Fitted With Claddings Made Of Injection Moulded Polypropylene. Approx. Size Of The Armrest Is 21.0Cm. ( L ) X 6.4 ( W ) . Permanent Contact Mechanism: The Permanent Contact Mechanism Is Designed With The Following Features: 360 Revolving Type. 14 Maximum Back-Itlt Only. Upright Position Locking. Tilt Tension Adjustment. Spine Cover: The Spine Cover Is Injection Moulded In Black Co-Polymer Polypropylene. Pneumatic Height Adjustment: The Pneumatic Height Adjustment Has An Adjustment Stroke Of 12.0 Cm. Telescopic Bellow Assembly: The Bellow Is 3 Piece Telescopic Type And Injection Moulded In Black Polypropylene Pedestal Assembly: The Pedestal Is Fabricated From 0.2 Cm. Thick Cr Steel, Powder Coated And Fitted With An Injection Moulded Black Polypropylene Hub Cap And 5 Nos. Twin Wheel Castors. ( Castor Wheel Dia. 5.0Cm. ) The Pedestal Is 60.Cm Pitch - Centre Dia. ( 70.0 Cm With Castors ) . Twin Wheel Castors: The Twin Wheel Castors Are Injection Moulded In Black Nylon. 2 Suply And Installation Of Modular Workstation Module Main Workstation Size - 1500Mm ( L ) X 600Mm ( D ) X 1050Mm Paneal Hightand Side Work Top Size- 900 Mm ( L ) X450mm ( D ) X1050mm Paneal Hight ( + / -10Mm ) The Worktop - Made Of 25 Mm ( + / -2Mm ) Thick Prelaminated Particle Board With Machine Pressed With 2Mm Thick Pvc Edge Band On All Sides. Tile Based Partition System - The Partition 50Mm Thick And 1050 Mm Ht. ( + / -10Mm ) With Top Tile In Fabric Of Approved Shade And Mid Blocks Prelaminated Board, Lower Tile In Metal Finish On Both Sides. All Metal Component Is In Power Coated Finish With The Thickness Of 50-60 U Dft. All Vertical Components Are Made Up Of Aluminum Exrusions. Prtition Systems Have Adequate Raceway At Single And Double Level For Running Data & Power Cables. Raceway Below Table Top And At Skirting Considered Including, Keyboard Trey, Cpu Trolley And Pedestal / Drawer Flat Metal Front, Full Ht Top Supporting Central Locking Of Size 390 Mm X 435 Mm D X 720 Mm Ht ( + / -10 Mm ) 3Dr = 2Box + 1 File. As Per Layout And Approved By Engineer In- Charge 3 Free Standing Partition Penals Tile Based Partition System - The Partition 50 Mm Thick 1050Mm ( H ) X 1200Mm ( L ) . ( + / -10Mm ) With Top Tile In Fabric Of Approved Shade And Mid Blocks Prelaminated Board, Lower Tile In Metal Finish On Both Sides. All Metal Component Is In Powder Coated Finish With The Thickness Of 50 - 60 U Dft. All Vertical Components Are Made Up Of Aluminum Extrusions. Partition Systems Have Adequate Raceway At Single And Double Level For Running Data & Power Cables. Raceway Below Table Top And At Skirting Considered Including 4 Free Standing Partition Penals Tile Based Partition System- The Partition 50 Mm Thick 1050Mm ( H ) X600mm ( L ) . ( + / -10 ) With Top Tile In Fabric Of Approved Shade And Mid Blocks Prelaminated Board, Lower Tile In Metal Finish On Both Sides. All Metal Component Is In Powder Coated Finish With The Thickness Of 50-60 U Dft. All Vertical Components Are Made Up Of Aluminum Extrustions. Partition Systems Have Adequate Raceway At Single And Double Level For Running Data & Power Cables. Raceway Below Table Top And At Skirting Considered Including 5 Free Standing Partition Penals Tile Based Partition System - The Partition 50 Mm Thick 1050Mm ( L ) . ( + / -10Mm ) With Top Tile In Fabric Of Approved Shade And Mid Blocks Prelaminated Board, Lower Tile In Metal Finish On Both Sides. All Metal Component Is In Powder Coated Finish With The Thickness Of 50-60 U Dft. All Vertical Components Are Made Up Of Aluminum Extrusions. Partition Systems Have Adequate Raceway At Single And Double Level For Running Data & Power Cables. Raceway Below Table Top And At Skirting Considered Including

INR 2360 /-

INR 38.02 Lakhs /-