Constructing Ht / Lt Line Using Ht Covered Conductor From Adikkadu To Valiyath Crusher And Vilanthara Under Electrical Subdivision Sasthamcotta
Tender Value
47.67 Lakhs
Estimated cost
Bid Submission
24 Jun 2023
0 days left
EMD
71600
Bank guarantee accepted
Document Fee
5900
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
sasthamcotta → Kerala
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Constructing Ht / Lt Line Using Ht Covered Conductor From Adikkadu To Valiyath Crusher And Vilanthara Under Electrical Subdivision Sasthamcotta
BOQ
| Sl. No. | Item Description |
| 1 | MATERIALS |
| 2 | Covered Conductor HT 70 Sq.mm |
| 3 | Pin insulator 11KV Composite Polymetric |
| 4 | Insulater tie for covered conductor |
| 5 | Disc Insulator 11 Kv Composite polymeric-covered conductor |
| 6 | Hard ware Fittings-GI-for HT Covered Conductor 120sq.mm |
| 7 | Midspan joint set for covered conductor HT |
| 8 | Single core outdoor termination kit for covered conductor |
| 9 | Insulation piercing connector set for covered conductor HT |
| 10 | Lightening arrestor 9 kv ,10kA( DistributionClasses)Composite polymer housing |
| 11 | GI-Wire 4mm 8swg |
| 12 | Bolt & Nut GI M 16x 40(1.5” x5/8”) |
| 13 | LABOUR |
| 14 | Loading HT Atype pole from the stacking place and unloading the same at work site ( Transport by vehicle ) |
| 15 | Transporting Pole by hired vehicle to a distance up to 5 km and carring up to 4 polesExcludingloading and un loading |
| 16 | Fitting and erecting 1 HT PSC pole in position including fitting cross arm ,Digging and back filling pit,Drawing earth leads |
| 17 | Fitting and erecting A typepole in position including fitting cross arm ,Digging and back filling pit,Drawing earth leads |
| 18 | Fitting and erecting HT DP using PSC poles including fitting two channel cross arm ,Digging and back filling pit drawing earth leads |
| 19 | Fitting and providing 1 HT Stay for PSC Pole including Digging and back filling pit |
| 20 | Additional rate for excavation of one pit for HT pole/HT Stay in hard laterite |
| 21 | Additional rate for excavation of one pit forA typepolein hard laterite |
| 22 | Providing one Earth using earth pipe incl. Digging separate pit at standard distance away from the pole/structure & backfilling. |
| 23 | Providing one coil Earth using GI Wireincl. Digging separate pit at standard distance away from the pole/structure & backfilling. |
| 24 | Fitting One Set of AB Switch and giving connections |
| 25 | Fitting One addition V-Cross arm in existing single poles including conveyance of materials |
| 26 | Fitting One One addition75x40 mm ,1.8 channel cross armin existing single poles including conveyance of materials |
| 27 | Fitting One One addition 100x50x60 mm ,2.4 channel cross armin existing 11 KV DPincluding conveyance of materials |
| 28 | Dismantling without damage one HT PSC/RCC Poles after disconnecting stays, struts and stacking the same |
| 29 | Transferring LT Single phase 2/3 wire OH Line to newely erected HT/LT Poles and refitting all items to the new poles |
| 30 | Transferring LT Three phase 4/5 wire OH Line to newely erected HT/LT Poles and refitting all items to the new poles |
| 31 | Dismantling and reconnecting Single phase servise connections from OH Line including lowering down the WP Portion |
| 32 | Dismantling and reconnecting Three phase servise connections from OH Line including lowering down the WP Portion |
| 33 | Dismantling one ordinary street light /CFL/LED Fitting from [pole repairing and refitting in the same in position and giving connections |
| 34 | Cutting tree beyond 30 cm but up to including 60cm girth,cutting of trunks and branches , removing the root completely and stacking |
| 35 | Cutting tree beyond 60 cm but up to including 120 cm girth,cutting of trunks and branches , removing the root completely and stacking |
| 36 | Loading HT PSC pole from the stacking place and unloading the same at work site ( Transport by vehicle ) |
| 37 | Fitting and providing HT Fly stay for 11 kv pole using HT PSC Pole including digging and back filling pit |
| 38 | Fitting and providing HT Strut using HT PSC pole incuding digging and back filling pit |
| 39 | Stringing1 KM Three phase 11 kv Line with XLPE Insulated ACSR Raccoon |
| 40 | Additional rae for providing one Disc set on any type of HT Pole for making cut point |
| 41 | Fitting one set ( 3 nos) of 11KV LA and giving connections excluding earthing |
| 42 | Installation of Insulation piercing connector for main to service line main :16-95sqmm, Tap : 16-95 sqmm |
| 43 | Doing straight joint on cables of sizes up to and including 3x 185 sq.mm using the cable joining kit supplied departmently as per specification |
| 44 | Doing one cable end termination on cable of sizes up to and including 3x185 sq.mm using the cable joining kit supplied departmently |
| 45 | Dismantling without damage One KM 11 KV Line ( 3 conductors) ,cross arms,insulators disc rolling the conductors and stacking |
| 46 | Installation of Insulation piercing connector for main to service line main :25-95 sqmm, Tap 25-95 sqmm |
AI Tender Summary
Tender Timeline
Jun 14, 2023
11:30 IST
Tender Published
Tender notice published.
CompletedJun 24, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJun 27, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender