Tender For Tiruvannamalai Municipality - 14.Providing Heavy Duty Storage Racks At Record Room And Store Room,Safety Locker,And Aluminium Partion At Revenue Section Municipal Office Building.

Sharing tender

Tiruvannamalai Municipality - 14.Providing Heavy Duty Storage Racks At Record Room And Store Room,Safety Locker,And Aluminium Partion At Revenue Section Municipal Office Building. 14. Providing Heavy Duty Storage Racks At Record Room And Store Room, Safety Locker, And Aluminium Partion At Revenue Section Municipal Office Building. , Providing Mild Steel Heavy Duty Storage Racks With Height Of 2000 Mm,Length 2000 Mm And Width 1500 Mm ,Number Of Shelves-8 Nos,Material-Mild Steel,Packaging Type -Box,Powder Coated,Maximum Load Per Layer-100 Kg Type-Slotted Angle Rack With One Year Warranty.Complete(Https://Mkp.Gem.Gov.In/Heavy-Duty-Storage-Racks/Heavy-Duty-Storage-Racks/P-5116877-73240807777-Cat.Html#Variant_Id=5116877-73240807777) , Providing Ri Table Size Of 5’X2.5’X2.5’Using Water Proof Of 19Mm Thick Over Which Laminated Sheet Of 1 Mm Thick Fixed Using Along With Necessaryfurniture Fittings Such As Hydraulic Hinges, Locks, Handles, Etc.,As Directed By The Departmental Officers. The Rate Inclusive Of Cost Of Materials And Labour, Etc., Complet.(Lr) , Providing Safety Locker Preferably Godrej 61 Defender Prime Tijori For Shop & Home, Defender Blue With 1 Year Warranty - 1280 Kg, 345 Litre Size (775 W X 720 D X 1541 H)Https://Mccoymart.Com/Buy/Godrej-61-Defender-Prime-Cl-C-Manual-Safe-Locker-For-Home-Amp-Office-Defender-Blue-With-1-Year-Warranty-1280-Kg-345-Litre/ , Supplying And Fixing In Position Of Alu. Anodised Partition With 62X38x2mm Extruded Box Section At Bottom Vertical And Horizontal Members. The Vertical Member Are Spaced At 90 Cm C/C And To Horizontal Members Are Spaced At 1.2M, 2.1M And 2.4M Height The Bottom Panels Should Be Covered With 12 Mm Thick Plb Exterior Grade And The Top And Middle Panels Should Be Fixed At 4Mm Thick Glass Thick Glass With Necessary Glassing Clips.Rubber Beading, Etc., Including Necessary Dismantling Holes In Rcc Columns, Beams Masonry Wherever Necessary With Power Power Drill Ti The Extent Required And Made Good To The Original Conditions After Fixing As Directed By The Departmental Officers. All The Aluminium Sections Should Be Anodised To 1.5Microns As Per Isi Specification 1868/1962.