Tender For Electrical/Mechanical Works At Lis Trikolbal New Of Misd Pattan.
Tender Value
Ref. Documents
Estimated cost
Bid Submission
20 Jun 2023
0 days left
EMD
1040
Bank guarantee accepted
Document Fee
50
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
pattan → Jammu And Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Electrical / Mechanical Works At Lis Trikolbal New Of Misd Pattan.
BOQ
| Sl. No. | Item Description |
| 1 | E/W in excavation of Trench by manual means with proper disposal of excavated earth upto 1m from cutting edge in all kinds of soil. The Trench shall be of size 20 feetin length, 1 feet in depth and 1 feet in width. |
| 2 | Dismantling of old worn out 200mm dia MS pipes by way of cutting of rusted nuts and bolts of the flangedusing oxy acetylene gas welding equipment. |
| 3 | Supply, installation, testing and commissioning of 200mm dia, 4.5 mm thick, MS pipe by means of cutting, arc welding using superior class welding electrodes. The pipe shall be provided in standard length of 6 meter and shall be fitted on delivery side of the pumping unit. The pipes are to be laid as per site requirement and all tools, tackles, skilled technician required for completion of the Job shall be provided by the firm. The pipes provided shall also be coated with two coates of red oxide paint and one coat of enamel paint. |
| 4 | Providing and fitting of 200 nominal dia MS flanges for fabrication of flanged pipe ends. The flanges shall be as per IS specified and 12mm thick. The flanges shall be fitted on the pipes using superior class welding electrodes and leak proof welding.The Job is to be carried out by highly skilled technician .Job includes all tools and tackles required for completion of the Job. |
| 5 | Providing and fitting of natural rubber gasket for flanged joints |
| 6 | Shifting of old damaged MS pipe to divisional store using private load carrier. The Job includes loading of the pipe at site and then unloading at divisional store Baramulla. |
| 7 | Modificationto priming pump pipingsystem by way of a.Providing and fitting of threaded C.I gate valve of40mm dia - 01nob. Providing and fitting of M.S funnel for priming purpose. The funnel should be of 40mm dia at the bottom and 80mm dia at the top.c. Providing and fitting of GI nipples of 40mm dia(3 inch long)(B-Class) - 01 noe. Providing and fitting of threaded C.I foot valve of 50mm dia - 01 nof. Arresting the leakage at few points in the delivery piping system by way of welding using superior class welding electrodes.The Job includes all the tools and tackles required for completion of Job. |
| 8 | Fabrication, providing and fitting of MS flanged tail piece of 200mm dia and 13 inch in length. The Job also includes disassembling of 200mm dia MS Sluice for fitment of tail piece. The Job includes all tools, tackles, skilled technician required for completion of the Job. |
| 9 | Repairs to 200mm dia MS foot valve by way of :a. Dismantling of suction pipe to retrieve foot valve by engaging skilled manpower.b. Dismantling of damaged foot valve at site shifting to workshop for its repairing by loading/unloading on private vehicle.c. Welding to the cracked hinges and its rebuilding by way of bushing and hinge rod as per requirement, finishing to the valve seat and valve plate. P/F of rubber washer to weight plate. d.P/F of rubber washer retaining platee. P/F of assorted size nuts and bolt as per requirement.f.Job includes Re-assembling of foot valve after repairs, shifting back to site and installingon suction side by engaging skilled labourbesides testing the foot valve. |
| 10 | Fabrication, providing and fitting of M.S windows (in 02 no) of size 4’ (Height) x 3\" 6\" (Width) by way of cutting and welding of MS angles, MS rectangular strips, MS sheets with following specifications and quantity.Frame of MS windows to be fabricated out of ISA 35x35x3Total length of ISA 35x35x3= 14 mtrTotal weight of ISA 35X35X3 (@1.6kg/mtr) = 22.5 kgs |
| 11 | Fabrication, providing and fitting of M.S windows (in 02 no) of size 4’ (Height) x 3\" 6\" (Width) by way of cutting and welding of MS angles, MS rectangular strips, MS sheets with following specifications and quantity.Frame of two partitionsof MS windows to be fabricated out of ISA 25x25x3Total length of ISA 25x25x3= 14 mtrTotal weight of ISA 25X25X3 (@1.1kg/mtr) = 15.5 kgs |
| 12 | Fabrication, providing and fitting of M.S windows (in 02 no) of size 4’ (Height) x 3\" 6\" (Width) by way of cutting and welding of MS angles, MS rectangular strips, MS sheets with following specifications and quantity.MS windows to be covered with rectangular sheets of 2mm thicknessTotal area of rectangular sheets ( 1mm thickness) = 2.6 sqmtrTotal weight of rectangular sheets= 20.41 kgs |
| 13 | Fabrication, providing and fitting of M.S windows (in 02 no) of size 4’ (Height) x 3\" 6\" (Width) by way of cutting and welding of MS angles, MS rectangular strips, MS sheets with following specifications and quantity.Securing the rectangular sheets in place by way of providing and fitting of rectangular strips of size 25 x 2mmTotal length of 25x3mm rectangular strip = 14 mtr Total weight of 25x3mm rectangular strip = 5.5 kgTotal approximate weight of latches and hinges = 2 kgs |
| 14 | Fabrication, providing and fitting of M.S windows (in 02 no) of size 4’ (Height) x 3\" 6\" (Width) by way of cutting and welding of MS angles, MS rectangular strips, MS sheets with following specifications and quantity.Total weight = (22.5+15.5+20.41+ 5.5+ 2)kgs =69kgsContingencies = 3kgsTotal =68.91 kgsNote: The MS windows should be made as per the actual site conditions and the contractor has to take the measurements before taking up the Job |
| 15 | Providing and fitting of MS square mesh having mesh size of 25mm x 25mm made out of 10SWG MS wire. The mesh is to be fixed to thewindow frames of pump station by means of 12mm width and 2mm thick MS strip with drilled holes in order to get it fitted to the wooden frames. |
| 16 | Preparing of surface of windows, Square mesh using blue lamp and metallic sand paper and then applying of two coats of red oxide anti corrosive primer followed by two coats of enamel paint of reputed make.Shade of paint to be specified by the site engineer. |
| 17 | Providing and fitting of Voltmeter (0-500V) of AE/Rishabh make |
| 18 | Providing and fitting of 20W Led light with IP 65 rating. The Job includes wiring of the light with 1sqmm FRLS copper wire and 6A MCB with gang boxfor ON and OFF operation. |
AI Tender Summary
Tender Timeline
Jun 14, 2023
11:30 IST
Tender Published
Tender notice published.
CompletedJun 20, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJun 21, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender