Translational Health Science And Technology Institute-THSTI has published Tender For Fabrication, Supplying And Installation In Position Wooden Lab Furniture And Aluminium Partition Work For Advanced Immunology Research Facility At 1St Floor Of Thsti Ncr Biotech Science Cluster, Faridabad. Submission Date for this Tender is 22-06-2023. Fabrication Work Tenders in faridabad Haryana. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. For fixed portion Powder coated aluminium (minimum thickness of powder coating 50 micron)OR Anodised aluminium (anodised transparent or dyed to required shade according to IS:1868, Minimum anodic coating of grade AC15) |
| 2 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately). Powder coated aluminium (minimum thickness of powder coating 50 micron) OR Anodised aluminium (anodised transparent or dyed to required shade according to IS:1868, Minimum anodic coating of grade AC15) |
| 3 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 5.0 mm thickness |
| 4 | Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete. |
| 5 | Providing and fixing100mm brass locks (best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete for sliding & hinged door shutters. |
| 6 | Providing and fixing aluminium handles ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete : up to 300 to 450mm length (Handle to be approved by EIC) |
| 7 | Providing and fixing sliding arrangement including allaccessories for aluminum sliding door shutters etc. complete as per the instructions of E.I.C. |
| 8 | Providing and fixing of frosted film on aluminum glazed partitions upto required height and pattern complete in all as per direction of E-in-C. |
| 9 | Providing, fabrication and fixing in position Laboratory Working Table of below mentioned following sizes consisting of two shelves with shutter on right side, three drawers unit on left side & leg space with one shelves on center, Unit shall be made of 19 mm thick BWP board on top, bottom, sides, partitions, shelves, shutters and 12 mm thick BWP ply in drawer units. Supporting frame shall be made of 14 swg thick 1”x1” MS square pipe fabricated in rectangle shape on top, one bracing all-around in bottom and four legs with height adjuster. Exposed exterior surface of Board (except granite stone top) shall be finished with 1 mm thick laminate and interior surface with 0.8 mm thick laminate, edges with 4 mm thick melamine polished teak wood margin / PVC lipping and MS square pipe shall be finished with synthetic enamel paint over a coat of primer. Not less than 15 mm thick polished z-black granite stone of adequate size shall be fixed on top with suitable adhesives including edge grinding chamfering & polishing including suitable locking arrangement, screws, fasteners, hinges, adhesives, telescopic drawer channels, magnetic catchers, handles/ knobs and all other necessary fitting/ fixing arrangement etc. complete as per design, drawing and as directed by the Engineer-In-Charge. Size of table 5"x2"8"x3"0" |
| 10 | Providing, fabrication and fixing in position Two Shelves Regent Rack (Hutch) with Frame of size 60"x18"x30" (to be common and properly fixed with lab tables). Supporting frame shall be made of 14 swg thick 1”x1” MS square pipe, wooden raceway made of 19mm thick BWP board to accommodate 2 nos. of switches/ sockets. Exposed surface of board/ ply shall be finished with 1 mm thick laminate, edges with 4 mm thick melamine polished teak wood margin and MS square pipe shall be finished with synthetic enamel paint over a coat of primer. Not less than 15 mm thick polished z-black granite stone of adequate size shall be fixed on top of both shelves with suitable adhesives including edge grinding chamfering & polishing. Unit shall include screws, fasteners, adhesives and all other necessary fitting/ fixing arrangement etc. complete as per design, drawing and as directed by the Engineer-In-Charge. |
| 11 | Providing and fixing 600mm deep over head storage cabinet on top of regent rack both side openable made of 19mm thick BWP board of approved make on top,bottom,sides,partitions,shelves,shutters (both side) and 6mm thick BWP ply of approved mak at middle of cabinets as per drawing.1.0mm thick laminate of approved make and shade on shutters & exposed sides of cabinets wherever required and 0.8mm thick laminets shal be fixed on all unexposed inner faces of cabintes including wooden lipping sutiable locking arrangement all type of screw fastners hinges/piano hinges, wooden screw adhesive polysing /painting iof lipping , magnetic catchers toverbolts door handales/knobs and all other type of necessary fittings etc. complete as per design drawinngs and site condition as directed by engineer in-charge (Only one side front elevation area shall be measured in sqm for payment). |
| 12 | Providing, fabrication and fixing in position of L-shape table with keyboard trayMade of 19mm thick BWP board, 6mm thick BWP ply back and 12 mm thick BWP ply in drawer units, 1mm thick laminate of approved shade on all exposed faces, 08 mm thick balancing laminate on all unexposed faces, teak wood edging, Pin board covered with cloth & white board shall be fixed in the middle, left side bottom portion shall have drawer unit including all hardware like handles, locks, magnetic catchers, hinges, all necessaryfixing arrangement etc. complete as per design, drawing and as directed by the Engineer-In-Charge. Size of table: 5" wide, 2’.6’’ height, 2’6’ Depth & L 18"" |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
