Tender For Construction Of Office Building Of District Audit Office, Local Fund Audit, Angul At Angul
Tender Value
4.98 Crore
Estimated cost
Bid Submission
27 Jun 2023
0 days left
EMD
4.98 Lakhs
Bank guarantee accepted
Document Fee
10000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
angul → Odisha
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of Office Building Of District Audit Office, Local Fund Audit, Angul At Angul
BOQ
| Sl. No. | Item Description |
| 1 | Clearing and grubbingland including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth upto 300mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable materials to be used or auctioned upto a lead of 1000metres including removal and disposal of top organic soil not exceeding 150mm in thickness as per Clause 201 of MoRT&H Specifications for Road & Bridge works Latest Revision & including cost of all labour, T&P, royalty etc complete and as per direction of Engineer-in-Charge. |
| 2 | Earth workexcavation in foundation trenches in hard soil including dressing and leveling the bed up to required depth and depositing the excavated materials at places away from work site within 50mtr initial lead and 1.5mtr initial lifts T&P shoring shuttering dewatering if required etc. complete as per direction of the Engineer-in-charge. |
| 3 | Up to 1.5Mtr Depth |
| 4 | Beyond 1.5Mtr to 3.00Mtr Depth |
| 5 | Supplying and stacking of good earth at site obtained from approved borrow pits including including carriage by mechanical means fromwithin a specified Lead from from the site, including loading, unloading to approved dumping ground or as approved /directed by Engineer-in-charge, including cost of equipments/ labour, conveyance, royalty, T&P etc. as per the direction of Engineer-in-charge. |
| 6 | Disposal ofsurplus/ excavated materials by mechanical means within 5km. Lead away from the site including cost of all labour , T&P complete as perthe direction of the Engineer-in-charge. |
| 7 | Providing Pre Anti termite treatement of best quality including basic cost, conveyanceof all materials, cost of all labour, T&P required for the work etc. including labour cesscomplete as per direction of the Engineer-in-charge |
| 8 | Supplying filling in foundation and plinth with sand in layers not exceeding 150mm thick including watering, ramming including cost, conveyance, royalty and taxes of all materials, all labour T&P required for the work etc. complete (measurement will be taken on finished compacted section only). |
| 9 | Cement concrete of propertion (1:4:8) in foundation and floors using 40mm nominal size clean hard black cursher broken granite metal of approved quality from approved quarry including lowering laying concrete in layers not exceeding 15cm thick to the required level ramming watering curing centering & shuttering etc. complete including cost conveyance royalty taxes of all materials and alllabour T&P required for the work etc. complete as per direction of the Engineer-in-charge. |
| 10 | Cement concrete of propertion (1:3:6) in foundation and floors using 40mm nominal size clean hard black cursher broken granite metal of approved quality from approved quarry including lowering laying concrete in layers not exceeding 15cm thick to the required level ramming watering curing centering & shuttering etc. complete including cost conveyance royalty taxes of all materials and alllabour T&P required for the work etc. complete as per direction of the Engineer-in-charge. |
| 11 | Cement concrete of propertion (1:2:4) in foundation and floors using 12mm nominal size clean hard black cursher broken granite metal of approved quality from approved quarry including lowering laying concrete in layers not exceeding 15cm thick to the required level ramming watering curing centering & shuttering etc. complete including cost conveyance royalty taxes of all materials and alllabour T&P required for the work etc. complete as per direction of the Engineer-in-charge. |
| 12 | RCC work of M-25 in all floors having a minimum compressive strength ( in work test) 250kg/cm2 in 15cm cubes at 28 days after mixing and tests conducted in accordance with IS 456 and IS 516 using 10mm size to 20mm size black hard crusher broken granite stone chips (10mm size 40% & 20mm size 60%) of approved quality & from approved quarry including hoisting lowering laying and compacting concrete with centering & shuttering and finishing the exposed surface smooth providinggrooves or beads where necessary and providing required No. of fan hooks as required including cost, conveyance, royalties and taxes of all materials and cost of all labour with T&P required for the work etc. complete in all respect but excluding cost of MS rod / Tor steel and binding wire and labour charges for bending binding and tying the grills.(In all Floors) |
| 13 | A) Column base & footing |
| 14 | B) Plinth beam |
| 15 | C) Column & Roof Beam |
| 16 | i) Ground Floor |
| 17 | ii) 1st Floor |
| 18 | iii) 2nd Floor |
| 19 | iv) 3rd Floor |
| 20 | D) Lintel Band |
| 21 | i) Ground Floor |
| 22 | ii) 1st Floor |
| 23 | iii) 2nd Floor |
| 24 | iv) 3rd Floor |
| 25 | E) Chhaja (6.50cm average thick) |
| 26 | i) Ground Floor |
| 27 | ii) 1st Floor |
| 28 | iii) 2nd Floor |
| 29 | iv) 3rd Floor |
| 30 | F) Roof slab |
| 31 | i) Ground Floor |
| 32 | ii) 1st Floor |
| 33 | iii) 2nd Floor |
| 34 | iv) 3rd Floor |
| 35 | G) Stair Case |
| 36 | i) Ground Floor |
| 37 | ii) 1st Floor |
| 38 | iii) 2nd Floor |
| 39 | I) Wall |
| 40 | Labour charges for straightening the coiled or bend up M.S. rod / HYSD bars confirming to Gr.Fe-500, cutting bending binding lapping placing welding etc. (Confirming to ISI specification) and jointing if necessary by lapping and tying the grills and placing in position as required for RCC work as per approved design hoisting lowering and laying in position including cost conveyance & taxes of M.S. rod / tor steel(Primary Producer like- SAIL/RINL/TATA/ JINDALSTEEL/ SHYAM STEEL) make) and binding wire of 18 to 20 gauge (as approved by the deptt.) weight of over lapping, couping, welded joints, spacer bar, chair, stage, hanger andbinding wires shall not be considered for payment at all. Standard co-efficient of different size of the steel shall be considered. Welding & lapping should be confirming to relevant clause of IRC 1987 in all floors. |
| 41 | i) Ground Floor |
| 42 | ii) 1st Floor |
| 43 | iii) 2nd Floor |
| 44 | iv) 3rd Floor |
| 45 | Fly Ash brick masonary in cement mortar of (1:6) in Foundation & Plinth using bricks of 25x12x8 cm sizehaving crushing strength not less than 75kg/cm2 with dimensional tolerance + 2% including splays cutting circular moulding chamfering, corbelling and similar such type of works with all necessary projections watering and curing after immersing the bricks in water at leastfor six hoursbefore use includingcost conveyance royalty taxes of all materials and cost of all labour with T&P required for the work as per specification & direction of Engineer-in-charge.) |
| 46 | Fly Ash brick masonary in cement mortar of (1:6) in Super Structure using bricks of 25x12x8 cm sizehaving crushing strength not less than 75kg/cm2 with dimensional tolerance + 2% including splays cutting circular moulding chamfering, corbelling and similar such type of works with all necessary projections watering and curing after immersing the bricks in water at leastfor six hoursbefore use includingcost conveyance royalty taxes of all materials and cost of all labour with T&P required for the work as per specification & direction of Engineer-in-charge.) |
| 47 | i) Ground Floor |
| 48 | ii) 1st Floor |
| 49 | iii) 2nd Floor |
| 50 | iv) 3rd Floor |
| 51 | Providing and laying Brick masonry work in Superstructure usingFly-Ash bricks confirming to IS 12894 and IS 2212 in cement mortar (1:4) for Half Brick Masonry Wall with provisions for 2 nos 6mm dia MS bar at each 4th layer after immersing the bricks for minimum 6 hours in water before use, with all necessary projections, splays cutting, circular moulding, corbelling, etc. as per the drawings including the cost of all materials, cost of all labour, conveyance, royalties, loading, unloading, scaffolding, staging, watering and curing, sundries, T&P, etc. complete as per the direction of the Engineer-in-charge. |
| 52 | i) Ground Floor |
| 53 | ii) 1st Floor |
| 54 | iii) 2nd Floor |
| 55 | Providing 16mm thick cement plaster in cement mortar (1:6)finished smooth to brick walls after racking out joints, scrapping & cleaning the surface & finishing the plaster surface smooth using wooden float only to proper plumbs & level and making necessary grooves, beads & drip course to give required ornamental finish as per drawing, watering, curing, scaffolding, screening sand etc. complete with cost, conveyances, royalties, taxes of all materials and cost of all labour with T&P, sundries required for the work etc. complete as per specification & direction of Engineer-in-charge. |
| 56 | i) Ground Floor |
| 57 | ii) 1st Floor |
| 58 | iii) 2nd Floor |
| 59 | iv) 3rd Floor |
| 60 | Providing 12mm thick cement plaster in cement mortar (1:6)finished smooth to brick walls after racking out joints, scrapping & cleaning the surface & finishing the plaster surface smooth using wooden float only to proper plumbs & level and making necessary grooves, beads & drip course to give required ornamental finish as per drawing, watering, curing, scaffolding, screening sand etc. complete with cost, conveyances, royalties, taxes of all materials and cost of all labour with T&P, sundries required for the work etc. complete as per specification & direction of Engineer-in-charge. |
| 61 | i) Ground Floor |
| 62 | ii) 1st Floor |
| 63 | iii) 2nd Floor |
| 64 | iv) 3rd Floor |
| 65 | Providing 6mm thick cement plaster in cement mortar (1:4)finished smooth to RCC work after racking out joints, scrapping & cleaning the surface & finishing the plaster surface smooth using wooden float only to proper plumbs & level and making necessary grooves, beads & drip course to give required ornamental finish as per drawing, watering, curing, scaffolding, screening sand etc. complete with cost, conveyances, royalties, taxes of all materials and cost of all labour with T&P, sundries required for the work etc. complete as per specification & direction of Engineer-in-charge. |
| 66 | i) Ground Floor |
| 67 | ii) 1st Floor |
| 68 | iii) 2nd Floor |
| 69 | iv) 3rd Floor |
| 70 | Providing 12mm thick cement plaster in cement mortar (1:4)finished smooth to brick walls after racking out joints, scrapping & cleaning the surface & finishing the plaster surface smooth using wooden float only to proper plumbs & level and making necessary grooves, beads & drip course to give required ornamental finish as per drawing, watering, curing, scaffolding, screening sand etc. complete with cost, conveyances, royalties, taxes of all materials and cost of all labour with T&P, sundries required for the work etc. complete as per specification & direction of Engineer-in-charge. |
| 71 | Providing 25 mm thick Grading Concrete (1:2:2) using10mm to 6mm size chips finished smooth on roof slab etc. complete with cost, conveyances, royalties, taxes of all materials and cost of all labour with T&P, sundries required for the work etc. complete as per specification & direction of Engineer-in-charge |
| 72 | Providing & installing two component acrylic modified cementitious waterproofing coating with masterseal 551/ Equivalent over roof slab after carrying out pond test on roof slab, filling all defects, saturating the surface, mixing the products and then application in 2.0 mm thickness (1.8 kg/sqm coverage rate for 1.0 mm thickness) in suitable layers complete in all respect, all materials, tools, plant & labour complete in all respect as per direction of the Engineer -in-charge. |
| 73 | Supplying, fitting, fixing of Vitrified Tiles of premium grade having thickness 8mm to 10mm confirming to IS 13756 of size 600mmx600mm Colour/printed series of approved make in floors on 20mm thick bed of cement mortar (1:4) and filling the joint with white cement mixed with pigment to match the shades of the tile including cost of all materials, taxes, labour, labour cess T&P erc. required for the work complete in all respect as per direction of the Engineer-in-charge. |
| 74 | i) Ground Floor |
| 75 | ii) 1st Floor |
| 76 | iii) 2nd Floor |
| 77 | Supplying, fitting, fixing of Vitrified Tiles of premium grade having thickness 8mm to 10mm confirming to IS 13756 of size 600mmx600mm Colour/printed series of approved make as directed by Engineer-in-charge in dados skirting and risers of steps on 12mm cement plaster (1:3)jointed with white neat cement slurry mixed with pigment to match the shades of the tile including rubbing and polishing etc.complete with cost, conveyance, royalities and taxes of all materials labour, labour cess complete in all respect. |
| 78 | i) Ground Floor |
| 79 | ii) 1st Floor |
| 80 | iii) 2nd Floor |
| 81 | Supplying, fitting, fixing of 20 mm thick Granite Tilesin floors, treads, steps and landing slab on 20mm thick bed of cement mortar (1:4) joined with neat cement slurry mixed with pigments to match the shades of the tiles including polishing the surface with cost, conveyance, royality and all taxes of all materials etc. complete as per direction of the Engineer-in-charge. |
| 82 | i) Ground Floor |
| 83 | ii) 1st Floor |
| 84 | iii) 2nd Floor |
| 85 | Supplying, fitting, fixing of 16 mm thick Granite stone Tiles in dados skirting and risers of steps on 12mm thick cement plaster (1:3) jointed with neat cement slurry etc. complete including polishing the surface with cost, conveyance, royality and all taxes of all materials etc. complete as per direction of the Engineer-in-charge. |
| 86 | i) Ground Floor |
| 87 | ii) 1st Floor |
| 88 | iii) 2nd Floor |
| 89 | Supplying, fitting, fixing of Chequard Tiles in floors, treads, steps and landing slab on 20mm thick bed of cement mortar (1:4) joined with neat cement slurry mixed with pigments to match the shades of the tiles including, rubbing and polishing the surface with cost, conveyance, royality and all taxes of all materials etc. complete as per direction of the Engineer-in-charge. |
| 90 | Supplying fixing and fittings MS window grills, Doors, MS verandha grills and MS grill gate of approved design and drawing made out of MS flat and MS angle at work site with one coat of anticorrosive red oxide zink chrome primer including cutting holes in brick or RCC walls and fixing with CC (1:3:6) including cost conveyance royalty and taxes of all materials all labour T&P required for the work complete (payment will be made on weight basis only) |
| 91 | Grill |
| 92 | Supplying, fitting & fixing of 32mm thick flush door shutter with approved quality of 30mm thick BWR block board pasted with 1mm thick sunmica on both side of approved design and quality with frame of 1st class hard wood including cost of all door fittings and fixtures,conveyance of all materials labour and T&P require for the work etc.compolete as directed by Engineer-in-charge. |
| 93 | Supplying and fitting-fixing of Un-plasticised Poly Vinyl Chloride(UPVC) ( FENESTA / NCL VEKA LTD.)Three Track - Three Panel sliding window– 60- Series duly manufactured using UPVC reinforced profiles of 108mm x 45 mm x 2.5 mm for outer frames and Window Sash of 39 mm x 58 mm x 2.5 mmcapable of mounting single glazing system, structurally reinforced with hot dip galvanised up to 50 microns of minimum thickness of 1.5 mm prefabricated & welded through fusion welding the window frame shall be fitted with 6 mm thick clear toughened glass of SAINT-GOBAIN make duly fixed with EPDM weathering seal resistantand the system is to be installed using Reinforced Large Coupler at the site using anchor fasteners, silicon rubber sealant, easy glazing/ deglazing at site etc., including* cost and conveyance of all materials, accessories, labour charges, materials andproduct conferming to ASTM D 638-14,EN-477-95 and other applicable codes and standards. |
| 94 | Supplying and fitting-fixing of Un-plasticised Poly Vinyl Chloride (UPVC) ( FENESTA / NCL VEKA LTD.) Ventilator/ Top Hung – 60- Series duly manufactured using UPVC reinforced profiles of 60 mm x 55 mmx2.5 mm for outer frames, 75 mm x 60 mm x 2.25 mm for casement Window Sash Profile capable of mounting single glazing system, structurally reinforced with hot dip galvanised up to 50 microns of minimum thickness of 1.5 mm prefabricated & welded through fusion welding the window sash shall be fitted with 6 mm thick clear toughened glass of SAINT-GOBAIN make duly fixed with EPDM weathering seal resistantaccessories like clipping locking system made of aluminium 1 No., per set of sashes and the system is to be installed at the site using anchor fasteners, silicon rubber sealant, easy glazing/ deglazing at site etc., including* cost and conveyance of all materials, accessories, labour charges, materials andproduct conferming to ASTM D 638-14,EN-477-95 and other applicable codes and standards. |
| 95 | Providing and supplying aluminium extruded tubular and other aluminium sections as per the architectural drawings and approved shop drawings, the aluminium quality as per grade 6063 T5 or T6 as per BS 1474, including super durable powder coating of 60-80 microns conforming to AAMA 2604 of required colour and shade as approved by the Engineer-in-Charge. (The item includes cost of material such as cleats, sleeves, screws etc. necessary for fabrication of extruded aluminium frame work. Nothing extra shall be paid on this account). |
| 96 | Designing, fabricating, testing, protection, installing and fixing in position semi (grid) unitized system of structural glazing (with open joints) for linear as well as curvilinear portions of the building for all heights and all levels, including: |
| 97 | (a) Structural analysis & design and preparation of shop drawings for the specified design loads conforming to IS 875 part III (the system must passed the proof test at 1.5 times design wind pressure without any failure), including functional design of the aluminum sections for fixing glazing panels of various thicknesses, aluminium cleats, sleeves and splice plates etc. gaskets, screws, toggles, nuts, bolts, clamps etc., structural and weather silicone sealants, flashings, fire stop (barrier)-cum-smoke seals, microwave cured EPDM gaskets for water tightness, pressure equalisation & drainage and protection against fire hazard including: |
| 98 | (b) Fabricating and supplying serrated M.S. hot dip galvanised / Aluminium alloy of 6005 T5 brackets of required sizes, sections and profiles etc. to accommodate 3 Dimentional movement for achieving perfect verticality and fixing structural glazing system rigidly to the RCC/ masonry/structural steel framework of buildingstructure using stainless steel anchor fasteners/ bolts, nylon seperator to prevent bimetallic contacts with nuts and washers etc. of stainless steel grade 316, of the required capacity and in required numbers. |
| 99 | (c) Providing and filling, two part pump filled, structural silicone sealant and one part weather silicone sealant compatible with the structural silicone sealant of required bite size in a clean and controlled factory / work shop environment, including double sided spacer tape, setting blocks and backer rod, all of approved grade, brand and manufacture, as per the approved sealant design, within and all around the perimeter for holding glass |
| 100 | (d) Providing and fixing in position flashings of solid aluminium sheet 1 mm thick and of sizes, shapes and profiles, as required as per the site conditions, to seal the gap between the building structure and all its interfaces with curtain glazing to make it watertight |
| 101 | Extra for openable side / top hung vision glass panels (IGUs) including providing and supplying at site all accessories and hardwares for the openable panels as specified and of the approved make such as heavy duty stainless steel friction hinges, min 4 -point cremone locking sets with stainless steel plates, handles, buffers etc. including necessary stainless steel screws/ fasteners, nuts, bolts, washers etc. all complete as per the Architectural drawings, as per the approved shop drawings, as specified and as directed by the Engineer-in- Charge. |
| 102 | Providing and fixing Glass Reinforced Concrete (G.R.C) Jallis in approved size, pattern, design, shade and thickness of 50mm on frame and design element in 30mm thick casted with layering technique Power Spray methodology have weight approximately between 3.5 – 4 Kg per Sq. Ft. and color of M/S UniStone make or equivalent. The above weight and thickness is considering dimensions of screens up to 2133mm in height and 1219mm in width and having at least 50% void space. The screens casting shall take place with layering methodology using-Direct Power Spray machines. The screens shall be casted from ‘53 grade’ White Portland Cement fine graded, sieved Quartz & Silica Sand, reinforced with Alkali Resistant Glass Fiber manufactured between 4-5% having Zirconia content at least 16%, Super Plasticizers and U.V resistant Synthetic inorganic pigments should be used. The material casting should take place in FRP Molds. The GRC Panels flexural strength average L.O.P should be above or equivalent to 6 N/mm2 & M.O.P should be above or equivalent to 15 N/mm2 for tests done on 28 days cured samples. The fixing of panels should be ‘Dry fixing’ i.e. to be done with M.S Galvanized Clamps, fixtures and fasteners & Self Tapping screws or as per approved shop drawings approved by site engineer in charge. |
| 103 | Painting 2 coats with Plastic Emulsion paints over a coat of primer and putty of approved shade by means of brush to inside surface of walls after cleaning the surface etc. complete in all floors including cost of all materials with all taxes and cost of all labour with T&P required for the work etc. complete in all respect as directed by Engineer – in – Charge. |
| 104 | i) Ground Floor |
| 105 | ii) 1st Floor |
| 106 | iii) 2nd Floor |
| 107 | iv) 3rd Floor |
| 108 | Painting two coats with weather coat paintof approved shade over a coat of primer by means of brush to outside surface of walls complete in all floors with cost, carriage and all taxes of all materials and cost of all labour with T&P required for the work etc. complete in all respect as per direction of the Engineer – in – Charge. |
| 109 | i) Ground Floor |
| 110 | ii) 1st Floor |
| 111 | iii) 2nd Floor |
| 112 | iv) 3rd Floor |
| 113 | Painting two coats with synthetic enamel paints over a coat of primer including cleaning the surface with sand papering and using paints of approvedquality and approved shade including cost conveyance taxes of all materials all labourT&P etc. complete as directed by the Engineer in charge. |
| 114 | i) Ground Floor |
| 115 | ii) 1st Floor |
| 116 | iii) 2nd Floor |
| 117 | Providing, Fitting & Fixing of Stainless steel of 304 grade in hand Railing of 50mm outer diameter of 2mm thick of approved Quality & Specification with balustrade of size 32mmX32mmX2mm square pipes in rows including Cost,conveyance of all Materials, Labour ,T&P required for fabrication, buffing & polishing, cost of all fixtures etc. complete and as per specification & direction of Engineer-in-charge (In all floors) |
| 118 | Supply, fabrication, erection, testing & commissioning of structural steel work made out of channels, angles, flats, plates, chequerd plates, I Section, Beam, Hollow Section in all types of frame, space frame, gates, attrium in top, truss, purlins, columns, beams etc. of YST-310 conforming to IS: 4923 grade inlcuding cutting, hoisting, fixing in position and painting with one coat of red oxide primer including cost of all material, labours, all consumables, all required plants & machinery, conveyance, loading and unloading etc all complete as per the direction of Engineer-in-charge. MAKE:-TATA STRUCTURA/ EQUIVALENT |
| 119 | Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement :3 coarse sand :6 graded stone aggregate 20mm nominal size well rammed ,with side rcc wall and consolidated and grouted with fine sand including finishing the top smooth including watering, curing, cost, conveyance, royalties, taxes of all materials, cost of all labour, T&P etc. complete as required for the finished item of work as directed by the Engineer-in-charge. |
| 120 | Loosening to a depth of 150mm,levelling and compacting original ground supporting embankment/ sub-grade as per approved drawing andtechnical specifications complete in all respect as per Section 900 and Clause 305 of MoRT&H Specifications for Road and Bridge works (latest Revision) & including cost of all labour, T&P, royalty etc. complete and including cost of all labour, T&P,etc. complete and as per direction ofEngineer-in-charge. |
| 121 | Construction of granular Sub-base by providing Coarse graded Granular sub-baseGrading-IV material as per table 400-1 ,spreading in unifrom layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC , and compacting with vibratory roller to achieve the desired density as per approved drawing andtechnical specifications complete in all respect as per Section 900 and Clause 401 of MoRT&H Specifications for road & Bridge works(latest Revision) & including cost & conveyance of all materials, labour, T&P, royalty etc. complete and as per direction ofEngineer-in-charge. |
| 122 | Providing wet mix macadum using crushed stone aggregates as per approved drawing and technical specification complete in all respect as per Section 900 and Clause 406 of MoRT&H Specifications for road & Bridge works(latest Revision) & including cost & conveyance of all materials, labour, T&P, royalty etc. complete and as per direction ofEngineer-in-charge. |
| 123 | Supplying, fitting and fixing of Zigzag paver blockof 80mm thick including cost of all materials with all taxes and cost of all labour with T&P required for the work etc. complete in all respect as directed by Engineer – in – Charge. |
| 124 | Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67 made of high intensity grade sheeting vide Clause No. 801.3 of specifications for road and bridge works of Ministry of Road Transport & Highways (Latest Revision) fixed over aluminium sheeting, 1.5mm thick supported on a mild steel angle iron post 75mm x 75mm x 6mm , firmly fixed to the ground by means of properly designed foundation with M-15 grade cement concrete 45cm x 45cm x 60cm, 60cm below ground level as per approved drawing& including cost of all materials, labour, T&P,royalty etc completein all respect and as per direction of the Engineer-in-charge. |
| 125 | 90cm equilateral triangle |
| 126 | 80 x 60 cm rectangular |
| 127 | Supplying & fixing of Pre cast kerb stone of size 600mm x 300mm x 150mm of M-30 grade of approved make, design, colour and size made by block making machine with proper compaction fixed in required patternetc complete as per direction in all respect conforming to 5758:1984 and as per direction of Engineer-in-Charge. |
| 128 | Providing, laying and fixing in position reinforced cement concrete 300mm dia NP4 hume pipesfor culverts on first class bedding of granular materialsincluding pointing ends fixing collars with cement mortar 1:3 for finished item of work as per approved drawing and technical specifications complete in all respectas per Section 1000 & 2900 of specifications for road and bridge works of Ministry of Road Transport & Highways (Latest Revision) including cost & conveyance of all materials, labour, T&P, royalty etc complete and as per direction of Engineer-in-Charge. |
| 129 | PLAIN GYPSUMCEILING :- Providing fitting and fixing of false ceiling with aluminium anodised T section No - 3215 with 2\"-0\" center to center , l section No -1705 upto 15 micron on 4 walls to be fixed by means of steel screw and pvc plug and alluminium grid 2\"-0\"x2\"-0\" with 12. 5 mm th gypsum board suspended from ceiling etc complete. The rate shall be exclusive of trap door which shall be paid for separately.including all cost of materials , labour, overheads T & P etc., excluding gstcomplete excluding gst . |
| 130 | First Floor |
| 131 | Second Floor |
| 132 | PAINTING ON PLAIN CEILING :- Providing and applying two coats ofPlastic Emulsion Paint of approved quality and shade over a coat ofputty &primer of approved quality to surfaces (interior) including throughly brushing the surface free from foreign materials, sand papering smooth the intermediate coats, including of all materials, labour, conveyance, royalties, scaffolding, watering, curing, sundries, tools and plants etc as per the direction of Engineer-in-charge. (colour & shade to be approved before procurment & use) excluding gstcomplete.(DULUX /Equivalent ) |
| 133 | First Floor |
| 134 | Second Floor |
| 135 | Supply & Installation ofDune Beveled Tegular Mineral Fiber Ceiling /equivalentusing Dune Beveled Tegular Mineral Fiber Ceiling Tiles of size 600x600x16mm, NRC-0.50 with Silhouette Grid 15x38mm wall angle 19x19mm and Armstrong Suspension system. Etc etc. includingcost of all labours, materials, conveyance,fixing & fitting ,loading and unloading, scaffoldings, sundries and T&P etc all complete as per direction of the Engineer -in-charge. ( OFFICE)excluding gst . (Armstrong /Equivalent ) |
| 136 | First Floor |
| 137 | Second Floor |
| 138 | GRID CEILING FOR PANTRY & TOILET :- Supply & Installation ofUltima Beveled Tegular Mineral Fiber Ceiling /equivalentusing Ultima Beveled Tegular Mineral Fiber Ceiling Tiles of size 600x600x19mm, NRC-0.70 with Silhouette Grid 15x38 mm wall angle 19x19mm and Armstrong Suspension system. Etc etc. including cost of all labours, materials, conveyance, fixing & fitting, loading and unloading, scaffoldings, sundries and T&P etc all complete as per direction of the Engineer -in-charge. excluding gst .(Armstrong /Equivalent ) |
| 139 | First Floor |
| 140 | Second Floor |
| 141 | Woodworks Grille (Ceilings & Wall) |
| 142 | Supply & Installation of Woodworks Grille (Ceilings & Wall) (Natural /Carbonized Shade)- /equivalent 300*2400*16mm with Accessories etc. including cost of all labours, materials, conveyance, fixing & fitting, loading and unloading, scaffoldings, sundries and T&P etc all complete as per direction of the Engineer -in-charge. excluding gst . (Armstrong /Equivalent ) |
| 143 | First Floor |
| 144 | Second Floor |
| 145 | LAMINATED WOODEN RAFTER FALSE CEILING:- Providing and fixing of wooden rafter false ceilling of size maxmimum upto 50 x125mm made outof with 19 mm bwp PLY frame workand then fixing 6 mm th bwp ply to it over which is finished with 1 mm th SUEDE/ TEXTURE laminate & fixed by means of stainless steel sturdsincluding all the cost of material & labour, t&p etc complete and as per the direction of EIC / ARCHITECT.excluding gst . |
| 146 | First Floor |
| 147 | Second Floor |
| 148 | Providing and Fixing Woodworks Linear of nominal width 100mm, having 80mm wide panel with 20mm reveal having a thickness of 15mm thickness and length 2400 mm. The panel shall be made of a Moisture resistant fibre board substrate having a minimum density of 595 Kg/m3 with a laminated facing as per the approved shade (Portland Maple, Sea Beech, Siam Wood & Mystique Walnut) and a melamine balancing layer on the reverse side. The panel shall have 0.7mm PVC edge banding along the length side with a similar finish as that of the face. The back of the panel shall have a black acoustic felt to cover the reveal of 20mm to attain an NRC of 0.5 (Average value of Absorption Co-efficient readings taken at 250 Hz, 500 Hz, 1000 Hz and 2000 Hz) as per ASTM C423. |
| 149 | The panels shall provide a Humidity Resistance (RH) of 70% with camber limit less than 1mm/1000mm and bow less than 1mm/300mm. The back of the panels shall be profile-grooved to receive 3600mm special linear carrier (PeakForm Prelude XL Main Beam) with integrated factory fitted clips for installation etc. includingcost of all labours, materials, conveyance, fixing & fitting, loading and unloading, scaffoldings, sundries and T&P etc all complete as per direction of the Engineer -in-charge. excluding gst . ( Armstrong/ EQUIVALENT) |
| 150 | First Floor |
| 151 | Second Floor |
| 152 | PANELLING |
| 153 | WOODEN PANELING WITH LAMINATE :- Providing and fixing wooden panelling suitably fixed to the wallswith 19 mm thick WPC, plyfinished with 1 mm thick texture / suede laminatecomplete with necessary Hardwood, skirting , mouldings & teak wood beading on the edgeetc. as per the detail design including the cost of all materials, labour, overheads and T & Petc. complete. The exposed frame workshall be finished with matt finsish enamel paints / polish with mellamine to match with the shade of the Laminates.excluding gst . |
| 154 | First Floor |
| 155 | Second Floor |
| 156 | WOODEN PANELING WITH SOLID SURFACE :- Providing and fixing wooden panelling suitably fixed to the wallswith 19 mm thick WPC ply , finished with 6 mm thickSOLID SURFACEcomplete with necessary Hardwood, etc. as per the detail design including the cost of all materials, labour, overheads and T&P etc. complete. (Basic cost of SOLID SURFACE- Rs 930/sft ) excluding gst . |
| 157 | PARTITION & DOOR |
| 158 | DOUBLE SKINED SOLID PARTITION FINSHED WITH LAMINATE:- Providing , fitting and fixingup partition walling aluminium anodized section no 9210 and 9207as single groove and doublerespectively as horizontal and vertical member and section 4660 as tapered clip and joining angle no 1855 etc. including 12 mm th bwp ply , 1mm th suede/ texture laminate on it. as per thedesign and specification with necessary teak wood plain / moulded beading including the cost of all materials , labour , nails, screw adhesives, overhead T & P etc. complete. The exposed frame work shall be finished with mat finish automotive paint or polish with mellamine as per the directions of the EIC/Architect. .)excluding gst . |
| 159 | First Floor |
| 160 | Second Floor |
| 161 | LAMINATED LOW HEIGHT PARTITION:- Providing , fitting and fixing 89mm thick double skinnedlow height partition suitably fixed to the wall and floor and storage unit with19 mm th bwp ply frame work / almunium frame workof size 37mm x 63 x1.6 mm with angle section 40x25x1.5 mmof sizeat 600 mm C / C with 12mm thick bwp ply on both side and finished with 1mm thick texture / suedelaminate,fixed to the ply on both sidesas per thedesign and specification with necessary teak wood plain / moulded beading including the cost of all materials, labour, nails, screw adhesives, overhead T&P etc. complete. The exposed frame work shall be finished with mat finish automotive paint or polish with mellamine as per the directions of the EIC/Architect. |
| 162 | First Floor |
| 163 | BOTHSIDE LAMINATEPARTIALY GLAZED DOOR :- Providing and fixing ISI marked BOTHSIDE LAMINATEPARTIALY GLAZED DOOR (8mm th plain/ frostedglass) shutters confirming to IS 2202(Part1) of 32mm thickness including ISI marked necessary hardware fitting with approved colour paint over a coat of primer etc and hardware fittings such as SS Concil Hinges (5\"),door magnet ,Handle with Mortise lock, door clouseretc. includingcost of all labours, materials, conveyance, hardware fixing, loading and unloading, all taxes and royalties, sundries and T&P etc all complete as per direction of the Engineer -in-charge. excluding gst . |
| 164 | First Floor |
| 165 | Second Floor |
| 166 | BOTHSIDE LAMINATEFLUSH DOOR :- Providing and fixing ISI marked flush door with both side laminated shutters confirming to IS 2202(Part1) of 32mm thickness including ISI marked necessary hardware fitting with approved colour paint over a coat of primer etc and hardware fittings such as SS Concil Hinges (5\"),door magnet ,Handle with Mortise lock, door clouseretc. includingcost of all labours, materials, conveyance, hardware fixing, loading and unloading, all taxes and royalties, sundries and T&P etc all complete as per direction of the Engineer -in-charge. excluding gst . |
| 167 | First Floor |
| 168 | Second Floor |
| 169 | TOUGHENDOOR |
| 170 | Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & double acting hydraulic floor spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-in-charge excluding gst . |
| 171 | First Floor |
| 172 | Second Floor |
| 173 | TRAP DOOR :- Providing and fixing trap doors for access to the areas above false ceiling. The trap door shall have an external frame made of 50mm x 50 mm in good quality seasoned wood scantling on which the shutter is hinged. Shutter shall be made of 12mm thk bwp ply and finished with 1.0mm thick laminate externally and automotive paint internally.Concealed heavy duty hinges shall be used to mount the shutters and locking shall be provided with panel locks. The shutter shall be moulded in level with the false ceiling forming a groove all around. Sufficient number of hinges and locks shall be provided to avoid sagging of the shutter. Key also shall be supplied for opening the shutter. No extra rate shall be provided for suspenders or frame works alround for linking the trap door to gypboard false ceiling.as per directions of Engineer-in-charge /Architect. excluding gst . |
| 174 | First Floor |
| 175 | Second Floor |
| 176 | Third Floor |
| 177 | Supplying, fitting and fixing in WPC Door frames of size 125 mm X 62.5 mmwhich is in contact with concrete and masonry surface fitted with required W.I. Clamps and required screws of approved quality etc. fixing in CC 1:2:4 including cost, conveyance and taxes of all materials and cost of all labour, sundries, T & P etc. required for all the work complete as per the directions of Engineer -in-charge. |
| 178 | First Floor |
| 179 | Second Floor |
| 180 | FURNITURE & FIXTURE |
| 181 | RECEPTIOPN TABLE :- Providing & supplying of Reception tableof width 600-750 MM,height 750 -1050mm with storagemade out of 19 mm th bwpply& finished with 1.0mm th suede /texture laminate,glass , ss pipe, 6mmTH solid surfacewhere ever necessary . & inner surface finished with 0.8 mm th laminate& beading to be finished with automative paint or mellamine polishincluding all types of material, labour , hardware etc. as per the detail design & specifications approved by EIC .excluding gst . (BASIC COSTOF LAMINATE - RS 53.76 /SFT & SOLID SURFACE RS 930.00 /SFT) |
| 182 | First Floor |
| 183 | RECEPTION BACK DROP :-Providing and fixing of 75-150 thick parttitionwithvinylsheet / solid surface / sand stone /19 MM THOnyxas a backdrop for the Reception. The structure shall be made of 19 mm thbwpply members 55mmx 40mm and then over it 6mm bwp ply shall be fixed and then thecorian shall be fixed to the partitions. The joints shall be finished with silicon adhesive to match withe the shade of the corian. as per the detail design and specifications and inclusive of all cost of labour, materials, T&P etc complete as per the directions of the EIC/Architect.excluding gst . (BASIC COSTOF LAMINATE - RS 53.76 /SFT & SOLID SURFACE RS 930.00 /SFT) |
| 184 | First Floor |
| 185 | Second Floor |
| 186 | CONSOLE / display unit:- Providing, fitting and fixing theconsole /display unitmade of 19mm bwp ply and finished with 1mm thicktexture / suede laminate , 6 M TH SOLID SURFACE , 12 mm th glass shelf whever necessary and the exposed edges& wooden surface are to be finished with wooden lipping and finshed with automative paints/polish with melamine finish as per approved design and specifications including cost of all materials, labour, hardware if any etc. complete as per the detail design & directions of the EIC.excluding gst . ( BASIC COSTOF LAMINATE - RS 53.76 /SFT & SOLID SURFACE RS 930.00 /SFT) |
| 187 | First Floor |
| 188 | Second Floor |
| 189 | STORAGE BELOWPANTRYPLATFORM ( MODULAR ) :- |
| 190 | Base Cabinets & Wall Cabinets :-Carcase is made up of bwp (Boiling Water Resistant) Plywood with Mini fix systems. Both side Laminated with all around PVC Edge Banding.Carcase Specification Details:1. Plywood Thickness - 18 mm after both side off-White lamination & all around PVC Edge Banding. 2. Base & Wall Cabinet Height - 700 mm.3. Wall Cabinet Depth - 350 mm (Including Shutter)4. Base Cabinet Depth - 580 mm (Including Shutter) 5. PVC (Polyvinyl Chloride) Front Edge Banding Thickness – (2 x 22 mm).6. Frame Thickness- 18 mm after both side lamination & all around PVC Edge Banding. |
| 191 | Shutters & Others Wood Works :- Shutter is made up ofbwp (Boiling Water Resistant) Plywood with both side Lamination & all around PVC Edge Banding.Shelf & Base and Back Details:1. Plywood Thickness -18 mm after both side lamination & all around PVC Edge Banding.2. Laminate Thickness – 1 mm3. PVC (Polyvinyl Chloride) Edge Banding Thickness – (2 x 22 mm) |
| 192 | Hardwares :-All Kitchen Hardwares & Fittings are from HAFLE (SS 304) or as per company standards specified. |
| 193 | Accessories :- All Kitchen Hardwares & Fittings are from Hetic (SS 304) or as per company standards specified.? PVC Cutlery Tray- 1 Pc ? 4\" Plain Wire Basket- 1 Pc? Cup & Saucer Basket- 1 Pc ? Thali Basket - 1 Pc? 8\" Plain Basket- 4 Pc, ? Waste Bin Holder- 1 Pc ? Fixed Detergent Rack- 1 Pc ? Magic Corner- 1 Pc(Dores)? Bottle Pullout- 1 Pc ? Cylinder Trolley- 1 Pc as per the detail design andapproved by the EIC. excluding gst . |
| 194 | MIRROR IN TOILETS |
| 195 | Providingand fixing of 8mm thmirror with8 mm th wpcply wood at the back side and the outer surfacefinished with1mm thlaminate shade and as approved by the EIC.( IN THE TOILET ) excluding gst . ( BASIC COSTOF LAMINATE - RS 53.76 /SFT) |
| 196 | OVER HEAD STORAGE :- Providingand fixing of over head storage cabinetof depth 375-400 mmwith out drawerwith 19mm th bwp & 8 mm th WPC ply wood at the back side and finished with 1.0 mmth texture / suedelaminates,8mm th glassin shutter and finished the teak wood lippingwith mat finish enamel paint or polish with mellamineto match the laminate shade , internal surface finished with 0.8 mm th laminateas per the detail design andapproved by the EICexcluding gst . ( BASIC COSTOF LAMINATE - RS 53.76 /SFT) |
| 197 | MODULAR FURNITURE |
| 198 | STORAGE CABINET - LAMINATE FINISH :- Supply, Fitting & Fixing ofPostlam Storage. Storage Top- Shall be made of 20mm thick Postlam (OSL) Postlambwp Ply for low height Postlam storage up to 750 Height and above 750mm height 21mm Thick Postlam bwp Ply is used. Both the 25mm and 21mm thick Postlambwp Postlam Ply confirming to IS 710with 2mm thick PVC lipping glued with Kliberit-779.6 glue. Storage top is under goes from distributed load test for deflection by applying 0.027kg/ mm load on Top and concentric load test by applying 90kg load on weaker section. Load carrying capacity of 21mm thick shelf shall be 25kgs UDL. |
| 199 | Storage Body- The construction shall be aesthetically appealing completely knock down construction .side panel and back panelis made from 21mm Postlam (OSL) Postlam Ply conforming to IS 710 ;. All the exposed edges are with 2mm PVC lipping & sealed edges are with 0.8mm thick PVC Lipping. Both the LH & RH side panel and back panel are connected with each other by using fittings such as Minifix & Dowels. Shelf can be made up of 21mm Postlambwp excluding gst approved by eic .(APP MAKE - SOS / EQUIVALENT ) |
| 200 | Back Storage 450 D x 750 H |
| 201 | Supply, Fitting & Fixing ofPostlam Storage. Storage Top- Shall be made of 20mm thick PostlambwpPly for low height Postlam storage up to 750 Height and above 750mm height 18mm Thick Postlam bwp Ply is used. Both the 25mm and 18mm thick Postlam bwp Ply confirming to IS 710 with 2mm thick PVC lipping glued with Kliberit-779.6 glue. Storage top is under goes from distributed load test for deflection by applying 0.027kg/ mm load on Top and concentric load test by applying 90kg load on weaker section. Load carrying capacity of 18mm thick shelf shall be 25kgs UDL. Storage Body- The construction shall be aesthetically appealing completely knock down construction .side panel and back panelis made from 18 mm Postlam bwp Ply conforming to IS 710;. All the exposed edges are with 2mm PVC lipping& sealed edges are with 0.8mm thick PVC Lipping. Both the LH & RH side panel and back panel are connected with each other by using fittings such as Minifix & Dowels. Shelf can be made up of 18mm Postlam bwp plyexcluding gst approved by eic .( APP MAKE - SOS / EQUIVALENT ) |
| 202 | Storage 450 D x 1200 Ht |
| 203 | Supply, Fitting & Fixing of SOS Make SL 60 Modular workstation. Work Top- Work top shall be made 20 mm thick Postlam Ply confirming to IS 710 with 2mm thick PVC lipping glued with Kliberit-779.6 glue. Table top is under goes from distributed load test for deflection by applying 0.027kg/mm load on Top and concentric load test by applying 90kg load on weaker section.Leg/ Gabble end should be provided. Frame: -The frame shall be made of extruded aluminum sections having 60mm width and average wall thickness 1.6mm. The frame shall be powder coated with epoxy polyester powder with the average thickness 50 to 60 microns conforming to IS 13871: 1993. A-pole which is vertical supporting member of frame and horizontal members namely Top bar and Mid bar. Top bar shall be made of Aluminum extrusion having 60mm width and 1.6mm thickness and Mid bar is made up of MS pipe 15x15x1mm thick confirming the IS 13871:1993 end plates welded on both the ends .Mid bar end plate shall made up of CRCA sheet 50x20x2 mm thick confirming IS grade IS513: 2008 .Tile holder used to incorporate the tile at specified location shall be made of Aluminum. Top bar holder and leveler foot shall be made of 2mm thick CRCA confirming to IS513: 2008 with zinc coated finish. The frame shall be joined together by Aluminum connectors and all visible aluminum shall be powder coated. Main Frame shall be of 60mm thickness offering various functional and decorative finishes as well as cable management capacity. Height of frame available: 1200mm. |
| 204 | Width of frame available:1200mm. Raceway above worktop, Top tile Backpainted glass, Bottom tile MDF Postlam. Joints/ posts/ connectors/trims:- The Two frame shall be joined together in 90 degree by using post connector shall be made of CRCA sheet confirming to IS513:2008. APP MAKE - SOS / EQUIVALENT |
| 205 | Curveliner Workstation 1500 x 1500 x 1200 Ht |
| 206 | Providing & supplyingof key board treywithmouse pad as per the detail design & specification includingall cost of labour , materialhardware ,etcexcluding gstapproved by eic(APP MAKE - SOS / EQUIVALENT. ) |
| 207 | Providing & supplyingofcpu standas per the detail design & specification includingall cost of labour , materialhardware ,etcexcluding gstapproved by eic .(APP MAKE - SOS / EQUIVALENT. ) |
| 208 | Supply, Fitting & Fixing ofPostlam Cabin table with storage . Work Top- Shall be made 20 mm thick Postlambwp Ply confirming to IS 710with 2mm thick PVC lipping glued with Kliberit-779.6 glue. Work top is under goes from distributed load test for deflection by applying 0.027kg/mm load on Top and concentric load test by applying 90kg load on weaker section Understructure- Modesty panel shall be made of 21 mm thick Postlam bwp Plyto IS 710/ Metal confirmingwith 2mm thick PVC lipping glued with Kliberit-779.6 glue. Gable ends shall be made of 21 mm thick Postlam bwp Ply confirming to IS 710/ Metal Leg. The construction shall be aesthetically appealing completely knock down construction fitting is done by using the Minifix & Dowels. Gable end height will be 725mm and its depth varies as per the depth of work top. Standard depth of work top will be 600mm and 750mm. Wire management- Wire manager cap on the table top shall be made of ABS material having Diameter 63.5mm standard. |
| 209 | The product must be from a Manufacturer having ISO 9001,ISO 14001,Latest BIFMA 5.1 certificates for few of its products. includingall cost of labour , materialhardware ,etcexcluding gstapproved by eic . ( APP MAKE - SOS / EQUIVALENT) |
| 210 | Main Table 1800 x 750 with storage + Side Storage 1050 x 450 |
| 211 | MOBILE PEDESTAL PEDESTAL 2D+1F :- Specificetion:- Top & Sides: 18mm Thk pre laminated particle board. Back: 9mm Thk pre laminated particle board. Edge: All exposed area with 2mm thick PVC edge lipping. Handle: Finger Groove Handle. Lock: Regular lock includingall cost of labour , materialhardware ,etcexcluding gstapproved by eic . ( APP MAKE - SOS / EQUIVALENT) |
| 212 | Table 1650 x 675 + Side Storage 975 x 450 |
| 213 | Supply, Fitting & Fixing of Postlamcubicle table . Work Top- Shall be made up of Work top shall be made 20 mm thick Postlambwp Ply confirming to IS 710 with 2mm thick PVC lipping glued with Kliberit-779.6 glue. Work top is under goes from distributed load test for deflection by applying 0.027kg/mm load on Top and concentric load test by applying 90kg load on weaker section. Understructure- Modesty panel shall be made of 21mm thick Postlam bwp Ply / Metal confirming to IS 710 with 2mm thick PVC lipping glued with Kliberit-779.6 glue. Gable ends shall be made of 20 mm thick Postlam bwp Ply confirming to IS710/ Metal Leg. The construction shall be aesthetically appealing completely knock down construction fitting is done by using the Minifix & Dowels. Gable end height will be 725mm and its depth varies as per the depth of work top. Standard depth of work top will be 600mm and 750mm. |
| 214 | Wire management- Wire manager cap on the table top shall be made of ABS material having Diameter 63.5mm standard.The product must be from a Manufacturer having ISO 9001,ISO 14001,Latest BIFMA 5.1 certificates for few of its products. (APP MAKE - SOS / EQUIVALENT ) |
| 215 | CHAIRS |
| 216 | Providing & supply ing * Liberate Medium Mesh Back Chair* IS 20D Mesh *Fabric Upholstered Cushion Seat* Multilock Mechanism* One Way Adjustable Arms ( Height )* Nylon Base includingall cost of labour , materialhardware ,etcexcluding gstapproved by eic .( App make * Liberate Medium Mesh Back ChairFEATHER LITE/Equivalent ) |
| 217 | Providing & supplying of * Amaze Project Medium Back Chair * Fabric Upholstered Cushion Seat & Back* Self Calibrating Multilock Mechanism* Adjustable Lumbar Support* One Way Adjustable Arms (Height)* Nylon Baseincludingall cost of labour , materialhardware ,etcexcluding gstapproved by eic .( App make Amaze Project Medium Back Chair,Featherlite /Equivalent ) |
| 218 | Providing & supplying of *Amaze Project Medium Back Mesh Chair * AN 70 Mesh* Fabric Upholstered Cushion Seat* Self Calibrating Multilock Mechanism* Adjustable Lumbar Support* One Way Adjustable Arms (Height)* Nylon Base including all cost of labour, material hardware ,etc excluding gst approved by eic . ( App make Amaze Project Medium Back Mesh Chair ,Featherlite /Equivalent ) |
| 219 | Providing & supplying ofTHREE Seater Tandem with Arms Withblack leatheretteincluding all cost of labour, materialhardware, etc excluding gst approved by eic . ( App make SJ-820A-3S-black pvc FEATHER LITE /Equivalent ) |
| 220 | LINEN |
| 221 | TRANSLUCENT ROLLER BLIND :- Providing and fixing ofROLLERS BLIND |
| 222 | inclusive of all cost of labour,materials . (excluding GST)as per the d etail design & specification. approved by eic .( Basic price Rs 500 /SFT) excluding gst APP MAKE -DEDECOR / EQUIVALENT |
| 223 | DECORATIVE ITEM |
| 224 | Providing & supplying of painting & art work made out of acrylic painting on canvas with pvc framing, 5 mm th glass on top & 6 mm ply on back side of the painting as per design approved by eic . |
| 225 | Providing & fitting fixture of Frosted Film For GlassBrand: 3M Monomeric Calendered, White With Matt Finish, Thickness: With adhesive: 3.5-4.5 mils (0.09-0.11 mm) Glue: Permanent, Pressure Sensitive Acrylic Glue , With Polycoated Craftpaper based Liner as per the approved shade and design Including all cost of labour , taxes T & P etc as per the detail design & specifications approved by EIC . |
| 226 | Providing & fitting fixture of 3M VINAYLE WITH LAMINATION ON WALL / WALL GRAPHICS as per the approved shade and design Including all cost of labour ,T & P etc as per the detail design & specifications approved by EIC . |
| 227 | Providing & supplying ss toilet sinage of size 150mmx150 mm as per the approved shade and design Including all cost of labour ,T & P etc as per the detail design & specifications approved by EIC |
| 228 | Providing & supplying of sinage made out of lazer cut retro letter on acp with ms frame & all necessary asscories Including all cost of labour ,T & P etc as per the detail design & specifications approved by EIC |
| 229 | Providing & supplying of sinage made out of lazer cutvinayle on acrylics includingall necessary asscories Including all cost of labour ,T & P etc as per the detail design & specifications approved by EIC |
| 230 | P.H Works :- Supplying all materials, labour, T&P and providing and fixing to wall or ceiling and floor GI/PVC pipes, class-IV (10 k.g. F/cm) on firming I.S.4985 of the following nominal bore, tube fittings and clamps including making good the wall, ceiling and floor, testing all complete as per specification and direction of the Engineer in charge. |
| 231 | 20mm dia CPVC Pipe |
| 232 | GroundFloor |
| 233 | 1st Floor |
| 234 | 2nd .Floor |
| 235 | 3rd floor |
| 236 | 25mm dia CPVC Pipe |
| 237 | 1st Floor |
| 238 | 2nd .Floor |
| 239 | 3rd floor |
| 240 | 32mm dia PVC Pipe |
| 241 | 40mm dia PVC Pipe |
| 242 | Supplying all materials, labour T&P and fitting and fixing brass/CP fittings of the following nominal bore with supply of all joiniting materialsincluding cost & conveyance of all materials to worksite, payment oftaxes etc. allcomplete as per P.H specification and direction of the Engineer-in-charge. |
| 243 | 15mm dia CP angle stop cock (Jaquar Make) |
| 244 | 15mm dia CP Short body bib cock (Plaza Make) |
| 245 | 15mm dia CPLong body bib cock (Plaza Make) |
| 246 | 15mm dia CP two in one bib cock (Con-CHR-041KN Jaquar make) |
| 247 | 15mm dia CP Health faucet (Con-ALD-MCH-573 Jaquar make) |
| 248 | Grab bar (Jaquar make) WAC - WHT - BG0800 |
| 249 | Grab bar (Jaquar make) WAC - WHT - BAI 090 |
| 250 | 450MM long Grab bar (Jquar make)AHS - CHR - 1507 |
| 251 | 25mm dia brassfull way valve (Shakti make) |
| 252 | 32mm dia brassfull way valve (Shakti make) |
| 253 | 40mm dia brassfull way valve (Shakti make) |
| 254 | 15mm CP Extension piece |
| 255 | 125mm CP grating |
| 256 | 15mm size C.P. flange |
| 257 | Supplying all materials , labour, T&P and fixing rotational mouldedpolyethylene cylindrical vertical water storage tanks conforming to IS:12701/1996 including cutting holes through the tank and fixing mild steel tubes and fittings and providing extra sockets and jam nuts, fixing ball valve etc. including hoisting upto a height of 5 metres above ground level and placing the tank to the required position and providing 5.40 mtr. lengthx0.25 mtr widthKBbrickwork in cement mortar (1:6) of 0.46m height in staging and 0.13mtr thick circular protection wall of 0.46mtr height to support the tank,12mm thick cement plaster in cement mortar (1:6) over brick work, RCC slab of size 1.60mX1.60m and 0.10m thick ,RCC beam of 0.25mx0.30m and 3.40m average length in cement concrete (1:2:4) using 12mm size crusher broken hard black granite chips and required steel reinforcement including centering and shuttering,watering,curing ,cost of all materials,conveyance of all materials to worksite , payment of royalty, all taxesetc.all complete as per approved drawing , P.H. specification and direction ofEngineer-in-charge. |
| 258 | 2000 liters capacityPVC water storage tank roof of 3rd floor |
| 259 | supplying all materials, labour, T&P and cutting holes through existing brick work including making good the damages in cement mortar (1:4) for taking G.I. Pipes and fittings/ P.V.C. pipes and fittings including watering, curing, cost & conveyance of all materials to worksite,payment of royality, taxes etc. all complete as perdirection ofEngineer-in-charge. |
| 260 | Ground Floor |
| 261 | 1st Floor |
| 262 | 2nd .Floor |
| 263 | 3nd .Floor |
| 264 | Supplying all materials , labour, T&P and cutting holes in RCC floors and roofs upto 19cm thick for passing P.V.C pipes and G.I fittings etc. , and repairing the holes after insertion of pipe etc. with cement concrete (1:2:4) including finishing complete so as to make it leak-proofas per P.H. specification and direction of Engineer-in-charge |
| 265 | Ground Floor |
| 266 | 1st Floor |
| 267 | 2nd .Floor |
| 268 | 3nd .Floor |
| 269 | Supplying all materials, labour, T&P and cutting grooves in pucca floors and walls for taking G.I./P.V.C. pipes and making good the damagesincluding watering ,curing , cost & conveyance of all materials to worksite, payment of royality, taxes etc all complete as per direction of the Engineer-in-charge. |
| 270 | Ground Floor |
| 271 | 1st Floor |
| 272 | 2nd .Floor |
| 273 | 3nd .Floor |
| 274 | Supplying all materials, labour, T&P and fitting and fixing U-PVC SWR soil waste ventilating pipes and fittings of the following outside diameter conforming to ISI No 13592/1992 to walls with nails, bobbins and wooden plugs or laying in trenches including jointing with supply of approved rubber lubricant by non-heat application method/as per manufacturer\"s specification, testing, earthwork in excavation in all kinds of soil and refilling of trenches , cost & conveyance of all materials to worksite, payment oftaxes etc.all complete as per P.H specification and direction of the Engineer-in-charge. |
| 275 | 110mm U-PVC SWR Pipe (Ori Plast/Finolex/Supreme Make Type-B) |
| 276 | 110mm U-PVC‘P’ Trap(Ori Plast/Finolex/Supreme Make) |
| 277 | 110mm U-PVC door bend(Ori Plast/Finolex/Supreme Make) |
| 278 | 110mm U-PVC Plain bend(Ori Plast/Finolex/Supreme Make) |
| 279 | 110mm U-PVC offset without ear(Ori Plast/Finolex/Supreme Make) |
| 280 | 110mm U-PVC Cowl(Ori Plast/Finolex/Supreme Make) |
| 281 | 110mm U-PVC S/Jn door(Ori Plast/Finolex/Supreme Make) |
| 282 | 110mm U-PVC D/Jn door(Ori Plast/Finolex/Supreme Make) |
| 283 | 110mm U-PVC Soketr(Ori Plast/Finolex/Supreme Make) |
| 284 | Supplying all materials, labour, T&P and fixing vitreous china water closet, squatting pan (Indian type W.C pan/Orissa pattern squatting pan) duly embedded in cement concrete (1:5:10) using 4cm size hard granite metal including fixing a pair of vitreous china 250mm x 130mm x30mm footrest, fixing 100mm dia HCI \"p\" or \"s\" trap (with/without 50mm dia horn) for water colset squatting pan including jointing the trap with pan in cement mortar (1:1) cutting the floor and mending good the damages , cost & conveyance of all materials to worksite, payment of royality , taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge. |
| 285 | 580mm size Orissa pan (Hindware/Parryware/Neycer make) |
| 286 | Single Piece E.W.C (Hindware/Parryware/Neycer make) |
| 287 | Supplying all materials, labour T&P and and fixing 12.50 liters/10 liters capacity low level flushing cistern with a pair of cast iron or M.S. brackets complete with fittings such as siphonic arrangements 15mm nominal size brass/pvc ball valve with polythene float CP brass handle,unions and couplings for connection with inlet, outlet and overflow pipes, 32mm dia CP long flush bend, 15mm dia pvc inlet connection pipe including cutting holes and making good the same and connecting the flush bend with cistern and closet and connceting the inlet pipe with suupply main , cost & conveyance of all materials to worksite, payment oftaxes etc. all complete as perP.H specification and direction of the Engineer-in-charge |
| 288 | 10 ltr. Capacity pvc L.L. cistern with 32mm. Dia CP long flush bend ( Slimline-white-Parryware make ) |
| 289 | Supplying all materials, labour T&P and fixing wash basins with hole for pillar taps with cast iron or M.S.brackets painted white including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc, fixing pedestal for wash basin recessed at the back for the reception of pipes and fittings, fixing PVC waste pipe of 32mm nominal diameter for wash basin including brass check nut complete, fixing pillar taps capstan head screw down high pressure lettered \"Hot\" and \"Cold\" with long screws, shanks and back nuts of 15mm dia nominal bore, fixing 15mm dia PVC inlet connection pipe and making connection with pillar cocks and supply mains for wash basin, fixing 32mm dia CP brass waste, cost & conveyance of all materials to worksite, payment oftaxes etc. all complete as perP.H specification and direction of the Engineer-in-charge |
| 290 | 550mmx400mm W.H.basin (Hindware/Parryware/Neycer make)with 15mm dia C.P.pillar cock (Plaza make) with pedestal (Hindware/Parryware/Neycer make)with |
| 291 | Under Counterbasin(560x450)Hindware-No.10095 |
| 292 | Supplying all materials,labour,T&P and fixing Flat back lipped wall (Mini stall urinal -630mmx180mm) urinal of the following sizes including connecting the urinal with 32mm. dia pvc waste pipe 910mm. long by means of white lead mixed with chopped hemp, fixing 32mm. dia CP dome waste, 15mm. dia CP spreader including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc. all complete as per specification and direction of the Engineer in charge Half stall urinal |
| 293 | Supplying all materials, labour, T&P and fixing standard sized CP towel rail complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge |
| 294 | Towel ring |
| 295 | Supplying all materials, labour, T&P and fixing standard sized glass-shelf with CP brass brackets and guard rail complete fixed to wooden plugs with CP screws as per specification and direction of Engineer in charge. |
| 296 | 600mmx125mm plate glass shelf with CP/NP guard rails. |
| 297 | Supplying all materials, labour, T&P and fixing mirror of superior glass mounted on 6mm.thick A.C. sheet or ply wood sheet and fixed to wooden plugs with CP screws and washers complete as per specification and direction of Engineer in charge.(large mirror) |
| 298 | 600mmx450mm size B.E mirror (swivelled type) |
| 299 | Supplying all materials, labour, T&P and fixing CP soap holder complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge |
| 300 | Supplying all materials , labour, T&P and cutting holes through existing brickor laterite masonry wall for takingU-PVC pipes and fittings including making good the damages etc. all complete as per P.H. specification and direction of Engineer-in-charge |
| 301 | Supplying all materials ,labour ,T&P and constructing Inspection Chamber ofinside size 760mmx760mmx460mmwith cement concrete (1:3:6) using 40mm size crusher broken hard black granite metal on bed , KB brick work in cement mortar (1:6) in foundation and plinth, moulding and shaping the channel inside and benching with cement concrete (1:2:4) using 12mm size crusher broken hard black granite chips,12mm thick cement plaster (1:3)with cement punning to inside, cement flush pointing (1:3) to outside, R.C.C cover slab (1:2:4) using 12mm size crusher broken hard black granite chips with R.C.C man hole cover, earth work in excavation in all kinds of soil and refilling the cavity around the chamber including watering,curing,cost of all materials, conveyance of all materials to worksite, payment of royalty,all taxesetc.all complete as perapproved drawing, P.H specification and direction of Engineer-in-charge |
| 302 | Inside size 76cmx76cmx46cm with 18” dia RCC MH cover |
| 303 | Supplying all materials, labour, T&P and providing cement concrete ( 1:4:8 ) with 40mm size crusher broken hard granite metal including watering, curing, cost of all materials,conveyance of all materials to work site with payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge |
| 304 | Supplying all materials, labour, T&P and providing cement concrete ( 1:2:4 ) with 12mm size crusher broken hard granite chips including watering, curing, cost of all materials,conveyance of all materials to work site with payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge |
| 305 | 1st Floor- |
| 306 | 2nd .Floor |
| 307 | Supplying all materials, labour, T&P and providing and fixing ceramic tiles in floors, treads or steps and landing on 25mm thick bed of cement mortar (1:1) ( 1 cement : 1 sand ) jointed with neat cement slurry mixed with pigment to match the shades of the tilesincludingwatering, curing,cost of all materials, conveyance of all materials to work site , payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge ( ceramic floor tiles of premium grade having thickness 7mm to 8mm conforming to IS 13755 of size Kajaria/Somany/Johnson tile 60cmx60cm special printed seriesto be pre-approved by the Engineer-in-charge ) |
| 308 | Kajaria/Somany/Johnson tile 60cmx60cm |
| 309 | Ground Floor |
| 310 | 1st Floor |
| 311 | 2nd .Floor |
| 312 | Supplying all materials,labour,T&P and providing 12mm thick cement plaster(1:4) on brick work including watering,curing,cost of all materials, conveyance of all materials to worksite,paymentof royalty,all taxes etc.all complete as per PWD specification and direction of the Engineer-in-charge. |
| 313 | Ground Floor |
| 314 | 1st Floor |
| 315 | 2nd .Floor |
| 316 | Supplying all materials, labour, T&P and providing and fixing porcelain glazed tiles in dado skirtingon 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigment to match the shades of the tilesincludingwatering, curing,cost of all materials, conveyance of all materials to work site , payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge( ceramic wall tiles of premium grade having thickness 6.5mm to 6.7mm conforming to IS 13753 of size Kajaria/Somany/Johnson tile 60cmx30cm special plain / printed series to be pre-approved by the Engineer-in-charge ) |
| 317 | Kajaria/Somany/Johnson tile 60cmx30cm |
| 318 | Ground Floor |
| 319 | 1st Floor |
| 320 | 2nd .Floor |
| 321 | Granite |
| 322 | Supply, installation,testing & commisioning of water cooler cum purifier with chiller infloor of following capacity:60/80 SS including fixing the same on the floor with necessary water connection & waste waste arrengments with all labour, T&P etc.all complete as per the specification & direction of EIC. (As per Model :AG Green pure Chill 1200 SS of Aquaguard) |
| 323 | Aqua guard pure Chill 120 PSS UV |
| 324 | Supplying all materials, labour, T&P and laying in trenches (to level or slope) unplasticized P.V.C. pipe conforming to IS 4985/2000 of the following out side dia for class- 3 (0.60mpa ) including jointing with supply of approved solvent cement by non-heat application method/as per manufacture\"s specification, provoding and laying in trench cement concrete (1:4:8) with 40mm size hard granite metal in the type C-1 standard bedding surrounding or encasing including concrete for bedding and curing etc all complete as per P.H. specification and direction of the Engineer in charge |
| 325 | 110mm dia P.V.C. pipe (All round) |
| 326 | 160mm dia P.V.C. pipe (All round) |
| 327 | Supplying all materials labor T&P and constructing MH chamber of sizes earth work in excavation in all kinds of soil CC(1:1:8) with black granite chips size 46mm brick work with K.B. brick having crossing strength not less than 75 Kg /CM2 to 90 Kg/CM2s in CM(1:6)12mm C.P(1:8) inside MH chamber over benching with cement slush pointing (1:3)outside the MH chamber providing painting MS or CI step iron RCC(roof of slab with CC(1:2:4)with black granite chips size 12mm bending binding tying the grills placing of the reinforcement providing RCC color of required size refilling the cavity around the MH chamber with excavated earth including channeling the bed of MH etc all complete as per PH specification. |
| 328 | MH size 0.91m x 0.91 m with 0.45 m (18” dia RCC Cover ) |
| 329 | Supplying all materials, labour, T&P and constructing soakway pit of the following size with dry brick walling from bottom upto invert of inlet pipe and 1st class K.B brickwork in cement mortar (1:6) for the remaining height at top, cement concrete (1:4:8) using 40mm size hg chips on bed, 12mm thick cement plaster (1:4) inside and outside over masonry brickwork, gravel backing in the rear of well steining, RCC cover slab in cement concrete (1:2:4) using 12mm size hg chips fitted with iron lifting handles including earthwork in open well excavation in all kinds of soil and refilling of cavity around the pit & painting the iron works, watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per approved specification and direction of the Engineer in charge |
| 330 | 1.80m dia x 2.60m deep soakway pit |
| 331 | 2 nos 50 Users Septic Tank |
| 332 | Earth work in excavation of foundation in all kinds of soil with in 1.5m initial lift including dressing and leveling of bed and breaking the clods and the excavated materials with in 50m initial lead as per direction of Engineer in charge. |
| 333 | Earth work in excavation of foundation in all kinds of soil with in 1.5m initial lift including dressing and leveling of bed and breaking the clods and the excavated materials with in 50m initial lead as per direction of Engineer in chargewith 1st extra lift of 1.50 m over initial laft. |
| 334 | Supplying all labor T&P & filling foundation and plinth with excavated materials well watered & rammed etc. all complete as per direction of EIC. |
| 335 | Supplying all materials labor T&P filling sand in foundation and plinth with well watered and rammed etc all complete as per direction of Engineer-in-charge |
| 336 | Supplying all materials, labour, T&P and providing cement concrete ( 1:3:6 ) with 40mm size crusher broken hard black granite metal including watering, curing,cost of all materials, conveyance of all materials to work site with payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge. |
| 337 | Supplying all materials, labour, T&P and providing cement concrete ( 1:2:4 ) with 12mm size crusher broken hard black granite chips including watering, curing,cost of all materials, conveyance of all materials to work site with payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge |
| 338 | Supplying all materials, labour, T&P and providing cement concrete (1:1½:3) with 12mm size crusher broken hard black granite chips for RCC works including hoisting, laying, watering, curing,cost of all materials, conveyance of all materials to worksite, payment of royalty,all taxes etc. all complete as per PWD specification and direction of the Engineer in charge. |
| 339 | Supplying all materials, labour, T&P and providing steel reinforcement of Fe-415 /Fe-500 grade for RCC work including cutting,bending,bindingand tying the grills and placing in position including cost of binding wire 18 to 20 gauge,cost of steel, conveyance of all materials to worksite, payment of royalty,all taxes etc all complete as per PWD specification and direction of the Engineer-in-charge. |
| 340 | Supplying all materials, labour, T&P and providing rigid & smooth centering and shuttering for RCC works including false work and dismantling them after casting including conveyance of all materials to worksite, payment of royalty, taxes etc. all complete as perspecification and direction of the Engineer-in-charge |
| 341 | RCC floor, roof slab chhaja up to 4.430 m height |
| 342 | Supplying all materials.labour.T&P and providing brick work in foundation and plinth with KB bricks having curshing strength not less than 75 kg/sqcm with dimensional tolerance+ 8% in cement mortar ( 1:3 ) including watering,curing,cost of all materials,conveyance of all materials to worksite,payment of royalty,all taxes etc.all complete as per PWD specification and direction of the Engineer in charge. |
| 343 | Supplying all materials,labour,T&P and providing 12mm thick cement plaster(1:3) on brick work including watering,curing,cost of all materials, conveyance of all materials to worksite,paymentof royalty,all taxes etc.all complete as per PWD specification and direction of the Engineer-in-charge. |
| 344 | Supplying all materials, labour, T&P and providing cement punning including watering, curing,cost of all materials, conveyance of all materials to worksite, payment of royalty,all taxes etc. all complete as perspecification and direction of the Engineer-in-charge |
| 345 | Supplying all materials labour T&P and fitting and fixing 12mm dia MS/CI step iron including supply of necessary CC(1:2:4) for fixing etc. complete as per PH specification. |
| 346 | Supplying all materials, labour T&P for providing fitting & fixing 150mm x 150mm SW Tee in wall including filling the recess with cement concrete (1:2:4) with 12mm size HG chips all complete including watering curing conveyance of all materials to work site payment of royalty all complete as per specification and direction of Engineer in charge. |
| 347 | 14,000 ltr capacity R.C.C. Under ground sumpof in side size (2.80m x 2.80m x 2.0m) |
| 348 | Earth work in excavation of foundation in all kinds of soil with in 1.5m initial lift including dressing and leveling of bed and breaking the clods and the excavated materials with in 50m initial lead as per direction of Engineer in charge. |
| 349 | Earth work in excavation of foundation in all kinds of soil with in 1.5m initial lift including dressing and leveling of bed and breaking the clods and the excavated materials with in 50m initial lead as per direction of Engineer in chargewith 1st extra lift of 1.50 m over initial laft. |
| 350 | Supplying all labor T&P & filling foundation and plinth with excavated materials well watered & rammed etc. all complete as per direction of EIC. |
| 351 | Supplying all materials labour T&P filling sand in foundation and plinth with well watered and rammed etc. all complate. As per direction of ELC. |
| 352 | Supplying all materials, labour, T&P and providing cement concrete ( 1:2:4 ) with 12mm size crusher broken hard black granite chips including watering, curing,cost of all materials, conveyance of all materials to work site with payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge |
| 353 | Supplying all materials, labour, T&P and providing cement concrete (1:1½:3) with 12mm size crusher broken hard black granite chips for RCC works including hoisting, laying, watering, curing,cost of all materials, conveyance of all materials to worksite, payment of royalty,all taxes etc. all complete as per PWD specification and direction of the Engineer in charge. |
| 354 | Supplying all materials, labour, T&P and providing steel reinforcement of Fe-415 /Fe-500 grade for RCC work including cutting,bending,bindingand tying the grills and placing in position including cost of binding wire 18 to 20 gauge,cost of steel, conveyance of all materials to worksite, payment of royalty,all taxes etc all complete as per PWD specification and direction of the Engineer-in-charge. |
| 355 | Supplying all materials, labour, T&P and providing rigid & smooth centering and shuttering for RCC works including false work and dismantling them after casting including conveyance of all materials to worksite, payment of royalty, taxes etc. all complete as perspecification and direction of the Engineer-in-charge |
| 356 | RCC floor, roof slab chhaja up to 4.430 m height |
| 357 | Supplying all materials,labour,T&P and providing 12mm thick cement plaster(1:3) on brick work including watering,curing,cost of all materials, conveyance of all materials to worksite,paymentof royalty,all taxes etc.all complete as per PWD specification and direction of the Engineer-in-charge. |
| 358 | Supplying all materials, labour, T&P and providing cement punning including watering, curing,cost of all materials, conveyance of all materials to worksite, payment of royalty,all taxes etc. all complete as perspecification and direction of the Engineer-in-charge |
| 359 | Construction of 1no production wells including scientific source finding through consolidated and unconsolidated rock with down the hammer drilling rig or combination rig with PVC pipe and installation of submersible pump set with all acessories |
| 360 | Labour for drilling a perfectly vertical bore hole of specified dia for a specified depth below ground level through consolidated and unconsolidated rock with down the hole hammer drilling rig or combination rig as required to suit the site condition as per the direction of the Engineer in charge including use of own rig with its accessories, tools and plant and consumables etc for lowering of 200mm/150mm dia G.I/P.V.C/M.S casing pipes for housing fitted with socket and with or without well screen as per the necessity for soft, medium, hard and boulder formation (G.I/ P.V.C/ M.S casing pipes if required to prevent collapse of overburden is to be provided by the contractor including lowering and withdrawing after completion of the tube well), 200mm dia to 400mm dia in overburden portion including packing of gravel supplied by the contractor for 400mm dia bore only |
| 361 | Drilling of 200mm dia bore |
| 362 | 00 mtr to 30mtr |
| 363 | 30 mtr to 45mtr |
| 364 | Drilling of 150mm dia bore |
| 365 | 45 mtr to above |
| 366 | Lowering the following size of G.I/P.V.C/M.S housing pipes with or without slotted pipes as per the necessity from ground level up to 45.00m depth and fitted and fixed up in perfectly vertical position including cutting and threading of pipes and slotted pipes and supplying and fixing all jointing materials, tools and plant etc all complete and keeping the top of casing pipe threaded including plugging tube wells to prevent entry of foreign materials. |
| 367 | Lowering of 200mm dia P.V.C casing pipes |
| 368 | 00 mtr to 30 mtrs |
| 369 | 30 mtr to 60mtr |
| 370 | Supplying polyvinyl chloride pipes as per ASTM-D-1785-89 having threads in accordance with DIN 2999 part-1/DIN-42225 part-II specification length of pipe (laying length) will be 3 mtrs. The pipes shall be supplied with both external and threaded with free socket. The pipe having external thread at one end i.e female and or belled end. The female end having internal thread is to be belled in order to accept the male end while jointing pipes with a bore threading shall be provided with a greave at the roof of the male thread accomodate flexible PVC/Rubber \"O\" ring to make the joint water tight colour of the pipe shall be blue. The name of the manufacture along with batch No class of pipe shall be stranded legibly of each pipe length. |
| 371 | 200mm dia PVC (sch-80) pipe |
| 372 | Supplying all materials, labour, T&P and providing and providing sanitary sealing by cement concrete grouting of annular space around GI/PVC/MS housing pipe upto 5m below ground level (as per drawing) to plug the bore hole excluding cost of cement all complete as per direction of the Engineer in charge. Minimum one metre of casing pipe to be inserted in the bore into the rock at the bottom to ensure sanitary sealing (excluding cost of cement which will be supplied directly by the department) |
| 373 | Cleaning and developing the tube well with supply of compressor worked till clear and adequate discharge is obtained from the tube well including supply and use of all necessary equipment and labour as per direction of the Engineer in charge |
| 374 | By DTH Rig |
| 375 | Supplying all materials , labour T&P and providing consturction of plat form as per UNICEF specifcation etc.all completes as per direction of Engineer-in-Charge |
| 376 | Supplying all materials ,labour T&P and providingfitting and fixing India Mark-II hand pump with C I Cylender and connectiong roads with providing 24.00 mtr of 32 mm dia GI raiser pipe etc. all complete as perP.H Specification and direction of Engineer-in-Charge |
| 377 | Supplying all materials, labour, T&P and providing, fitting and fixing submersible pump with squirrel cage induction type submersible type submersible electric motor to run on 3 phase/1 phase line voltage ranging from 320 volt to 450 volt conforming to IS: 8034/89 with following specifications with suitable control panel, jointing with GI/PVC/HDPE pipes, electrification, testing, commissioning, trial running, conveyance of all materials to worksite, payment of taxes etc all complete as per specification and direction of the Engineer in charge (Texmo/Crompton Greaves/Kirloskar make) |
| 378 | 1 H.P. Single phase/ three phase 3 stagehead renge of 20 to 35 mtr with discharge capasity 145 to 110 L.P.M With outlet dia 25 mm (keeping 100% standby) |
| 379 | DOL Control panel |
| 380 | 40mm dia steel short piece |
| 381 | Well cap |
| 382 | 50mm size CI bracket |
| 383 | 2.50sqmm flat cable |
| 384 | 20mm dia rigid UPVC pipes |
| 385 | Steel rope with cover |
| 386 | Labour charges for lowering including transportation |
| 387 | Supplying all materials, labour, T&P and providing and fixing to wall or ceiling and floor HDPE pipes and pipe fittings conforming to IS: 4984/2000 (10kgf/sqcm) of the following nominal bore with clamps and jointing by Fusion welding method including testing, making good the wall, ceilingand floor all complete as per specification and direction of the Engineer in charge |
| 388 | 32mm HDPE pipes (Finolex/Supreme make) |
| 389 | E.I WORKS :- Circuit Cum Wiring |
| 390 | Supplying & Wiring for light point/ fan/ exhaust fan point/ call bell point with 1.5 sqmm FR PVC insulated copper conductor single core cable in surface / recessed 1.6 mm thick PVC conduit with modular switch and earthing the point with 1.5 sqmm FRLS PVC insulated copper conductor single core cable including providing modular box with cover of requisite number of modules including providing cover plates as required. |
| 391 | Single light point controlled by one 6A switch or first light point of group control. |
| 392 | Subsequent point of group control |
| 393 | Supplying & Wiring for light point/ fan/ exhaust fan point/ call bell point with 1.5 sqmm FRLS PVC insulated copper conductor single core cable in surface / recessed2 mm thick PVC conduit with modular switch and earthing the point with 1.5 sqmm FRLS PVC insulated copper conductor single core cable including providing modular box with cover of requisite number of modules including providing cover plates as required.(Excluding rate of MCB) |
| 394 | Single light point controlled by one 6A MCB or first light point of group control. |
| 395 | Subsequent point of group control |
| 396 | Supplying & Wiring for twin control light point with 1.5 Sqm.m FRLS PVC insulated copper condutor single core cable in surface / recessed PVC conduit 2 way modular switch,modular plate,suitable GI box and earthing the point with 1.5 Sqm.m .FRLS PVC insulated copper conductor single core cable etc as required. |
| 397 | Supplying and fixing two module stepped type electronic fan regulator with proper modular plate switch box including connections etc. as required. |
| 398 | Supplying and fixing 6 Amp plug with 6 Amp switch (Modular Type) on existing switch board. |
| 399 | Supplying & fixing suitable size GI Box withmodular plate and cover in front on surface or in recess, including providing and fixing 3pin 5/6 amps modular socket outlet and 5/6 amps modular switch etc. as required. |
| 400 | Supply, installation, testing & commissioning of 6 / 16 Amp Plug Boards consisting of a 16 Amp clip-in type modular switch with indicator and a 6/16 Amp clip-in type modular shuttered plug socket fixed on metallic concealed box including interconnections and making good the damages caused complete as required and as per direction of Engineer-in-charge. |
| 401 | Supplying, installation, testing & commissioning of 20 Amp AC starter switch with 25 Amp modular socketoutlet with 25 Amp Plug on surface or in recess, on 2 Nos two module GI box with plate etc. complete with direction of Engineer-in-charge. Starter-Crabtree(cat no-ACT0202504) or equivalent. |
| 402 | Wiring for circuit/ submain wiring along with earth wire of following size of FRLS heavy gauge PVC insulated copper conductor single core cable in heavy duty PVC conduit laid in surface/ recess as required. (Make of Wire:- Polycab/Finolex/Havells/KEI/Equivalent) |
| 403 | 2X2.5 + 1X1.5 sqmm FRLS Cu wire |
| 404 | 2X4 + 1X1.5 sqmm FRLS Cu wire |
| 405 | 2X6 + 1X2.5 sqmm FRLS Cu wire |
| 406 | 4X10 + 2X4 sqmm FRLS Cu wire |
| 407 | Fan & indoor Fixtures |
| 408 | Supply, delivery and fixing of Ceiling fan hookbox made out of 18 swg GI sheet and containing 10 mm dia round ms bar projecting atleast 150mm on either side & duly bent to accommodate ceiling fan down rod bolt & having earthing arrangement as per direction of Engineer-in-charge. |
| 409 | Supplying, installation, testing and commissioning following type of light fixtures with dummy box for surface mounted fixtures only, fans and exhaust fans with all accessories, as required.(The colour temprature for fixtures shall be between 3500 deg K & white in colour as per application). |
| 410 | Fully diffused type recessed mounted 2\"X2\" LED fitting (3000 Lumen/ 25W)similar to PHILIPS (CAT No:RC380B LED25S -6500 G4 L60 W60 PSU OD) / Equivalent of Bajaj/ Wipro/Crompton/Havells. |
| 411 | Fully diffused type recessed mounted 1\"X1\" LED fitting (2000 Lumen/ 18W)similar to PHILIPS (CAT No:RC375 LED 15S 18 WATT CW) / Equivalent of Bajaj/ Wipro/Crompton/Havells. |
| 412 | Fully diffused type recessed mounted 6\"X6\" LED fitting (1800 Lumen/ 18W)similar to PHILIPS (CAT No:DN177 LED 15S 18 WATT CW) / Equivalent of Bajaj/ Wipro/Crompton/Havells. |
| 413 | Commercial Batten type wall mounted 4\" LED fitting (2200 Lumen/ 20W)similar to PHILIPS (CAT No:BN021C LED20S PSU CW GR S2) / Equivalent of Bajaj/ Wipro/ Crompton/ Havells. |
| 414 | Retail Down type LED Light surface fitting (1800 Lumen/ 16 W)similar to PHILIPS (CAT No:SM251C LED16S- 6500 PSU WH) / Equivalent of Bajaj/ Wipro/Crompton/Unilux. |
| 415 | 10 watt LED Light surface fitting with batten/angel Holdersimilar to PHILIPS (CAT No:Base B22) / Equivalent of Bajaj/ Wipro/Crompton/Unilux. |
| 416 | Endura type 700 Lumen/10W LED Bulkhead wall fitting PHILIPS (CAT No:WT140W LED7S CW PSU S1 PC)/ Equivalent of Bajaj/ Wipro/Crompton/Havells. |
| 417 | 5 mtr Blue/white Cove fitting/strips PHILIPS (CAT No:31308 led strip - blue/white)/ Equivalent of Bajaj/ Wipro/Crompton/Havells. |
| 418 | Infrared,Surface Mounted PIR occupancy Sensor on false ceiling, compatible with the existing LED fixtures ( as per Crabtree Model No. ST46B / Equivalent of Bajaj/ Wipro/ Philips/Crompton/ Honeywell. |
| 419 | Supplying and fixing call bell/ buzzer suitable for single phase,230 V, complete as required. |
| 420 | Supplying, installation, testing and commissioning of ceiling fan including wiring the down rod, earthing etc as required (Make : Bajaj/Usha/ Crompton/ Orient/ Khaitan/ Havells). |
| 421 | 1200 mm sweep |
| 422 | Supplying, installation, testing and commissioning of wall mounted fan including earthing etc as required (Make : Bajaj/Usha/ Crompton/ Orient/ Khaitan/ Havells). |
| 423 | 400 mm sweep 1300 RPM |
| 424 | Supplying, installation, testing and commissioning of Heavy Duty Exhaust fan including louvres, Ceiling Rose & Electric Connection asrequired. (Make -Bajaj/Usha/ Crompton/ Orient/ Khaitan/ Havells) |
| 425 | 300mm sweep 900 RPM |
| 426 | Panels, MDBs, DBs. MCBs |
| 427 | Supply, installation, testing and commissioning of cubicle type sectionalised, front operated top entry dust and vermin proof M.V. Panel Boards suitable for operation at 415V, 3 phase, 4 wire, 50Hz distribution system fabricated out of 2.0 mm (14 SWG) thick CRCA sheet for frame work and covers, 3mm thick for gland plated i/c cleaning & finishing complete with 7 tank process for powder coating in approved shade, having suitable capacity extensible type FP Aluminium alloy Bus bars of high conductivity with heat shrienkable PVC sleeve, DMC.SMC bus bar supports, with short circuit withstand capacity of 70 KA for 1 sec. bottom base channel of MS section not less than 100mm x 50mm x 5mm thick, fabrication shall be done in transportable sections, wiring with space heater, thermostat and control MCBs shall be provided for all vertical sections of main LT Panel, all hinged door shall be earthed through2.5 sq mm tinned braided, the incoming and outgoing feeders shall be accommodated in a modular arrangement, detachable gland plates, adequate size cable alley, Sign writing, Painting, Earthing entire panel shall have a common earth bar of suitable size at the rear with 2 Nos earth solid connections from main bus bar to switch gears with required 1.5 sq.mm. zero halogen fire retardant low smoke insulated copper conductor s/c cable, cable alleys, cable gland plate in two half, Numbering, Danger plate, including PVC insulated copper FRLS wires of minimum 1.5 sq.mm & 2.5 sq.mm for CT\"s etc. with all accessories including interconnections, earth bus, Surge protection Device(SPD) etc. as required. |
| 428 | LT Panel (To be installed inside the Electrical Room at Ground Floor) |
| 429 | Busbar - 630 Amp Al busbar with SC rating of 36 KA suitable for operation at 415 Volt, 50 Hz, 3 Phase supply. |
| 430 | Two(2) Nos Incomer from EB & DG Source each comprising of |
| 431 | One (1) - 400 Amp FP, 36 KA, MCCB with 3 Nos Phase indicating lamps with control fuse/ MCB, 3 Nos 400/5 A 10VA Cl 1.0 CTs, Digital Voltmeter, Ammeter With S/S. |
| 432 | One set - Indicating lamp for ON/OFF/Trip and Phase indication with control fuse/ MCB. |
| 433 | One(1)- Trip Push Button |
| 434 | One(1) Set- Trip Circuit Healty Test Push Button with Indicating Lamp. |
| 435 | 1 No PLC based Logic controller Comprising of |
| 436 | 1 No - PLC based logic controller for 1 no. supply from DG Set & 1 no. supply from Transformers (Raw/EB) with auto syncronisation. |
| 437 | Bus coupler (with electromechanical castle key interlocking provision) is comprising of |
| 438 | One (1) - 400A,TPN, 36KA,MCCB |
| 439 | One set - Indicating lamp for ON/OFF/Trip and Phase indication with control fuse/ MCB. |
| 440 | Two (2) - Outgoing Feeders (for 1 no. 45 KVAR Panel & 1 spare each comprising of |
| 441 | One (1) - 100A FP, 25KA,MCCB. |
| 442 | One(1) set of –100/5A , 10VA , CL 1.0, CT |
| 443 | One (1) - 3 Ph Digital Ammeter. |
| 444 | One Set ON/OFF Indicating lamp with control fuse/ MCB. |
| 445 | Four (4) - Outgoing Feeders (for 1 no. UPS I/C Breaker,2no. Lift Panels (1&2) & 1 spare each comprising of |
| 446 | One (1) - 63A FP, 25KA,MCCB. |
| 447 | One(1) set of –63/5A , 10VA , CL 1.0, CT |
| 448 | One (1) - 3 Ph Digital Ammeter. |
| 449 | One Set ON/OFF Indicating lamp with control fuse/ MCB. |
| 450 | Twentytwo (22) - Outgoing Feeders (for 1 Fire FightingPanel(Terrace Pump), 2 nos Water Supply Pumps , 1 Stp, 16 nos LDB/PDB & ACDBs & 2 nos spare each comprising of |
| 451 | One (1) - 32A TPN, 25KA,MCCB. |
| 452 | One(1) set of –32/5A , 10VA , CL 1.0, CT |
| 453 | One (1) - 3 Ph Digital Ammeter. |
| 454 | One Set ON/OFF Indicating lamp with control fuse/ MCB. |
| 455 | Two (2) - Outgoing Feeder each comprising of |
| 456 | One (1)- 32 Amp TPN 25 KA MCCB with 32 Amp TP contactor, over load trip, Programmable timer for automatic switching ON and OFF of external lighting, Auto/ Manual selector switch, Auxilliary Contactor, ON/OFF push button and indication along with control fuse etc as required. |
| 457 | PANEL AS ABOVE |
| 458 | APFC Panel(45 KVAR) |
| 459 | Busbar - 125 Amp Al busbar with SC rating of 25 KA suitable for operation at 415 Volt, 50 Hz, 3 Phase supply |
| 460 | One(1) - Incomingfeeder having |
| 461 | One (1) - 100 Amp, 25 KA TP MCCB with 3 Nos Phase indicating lamps with control fuse/ MCB, 3 Nos 100/5 A , 15VA, Cl 1.0 CTs, Digital Voltmeter, Ammeter, Ventilation fan. |
| 462 | One(1) No. 6 steps (required for the follwoing) Microprocessor APFC controller/Relay shall continuously monitor all three phases and LCD displays for various Electrical Parameters like voltage, input current, capacitive current, KVA demand,KW, Power Factor.Controller should be mounted on the front side of the panel. Bank with 45 KVAR capacity having 3 phase MPP based heavy duty dieelectric low loss as per ECBC/IS 7752 guidelines or 0.5w/kVAR ISI marked power capacitor (5x2+ 1x5 (fixed) +3x10 ) and provided with capacitor duty contactor based switching to supress switching of inrush current .Suitable rating Al. PVC insulated bus bar & interconnections shall be included. The panel shall be complete with minimum 7% detuned reactors (only filters)for harmonics control. |
| 463 | Five (5) Outgoing Feeders each provided with MCCB, Contactor, ON/OFF push button and indicating lamp and capacitors |
| 464 | Three (3)-Outgoings each having |
| 465 | One (1) - 32A TP,10 KA,MCB (D-Curve) |
| 466 | One (1) - Capacitor duty contactor suitable for 10 KVAr capacitor |
| 467 | One (1) - 10 kVAr, 480V, TP Heavy duty capacitor with internal wiring, fuses,Harmonic Filter (7%) etc. complete as required |
| 468 | Three (3)-Outgoings each having |
| 469 | One (1) - 25A TP,10 KA MCB (D-Curve) |
| 470 | One (1) - Capacitor duty contactor suitable for 5 KVAr capacitor |
| 471 | One (1) - 5 kVAr, 480V, TP Heavy duty capacitor with internal wiring, fuses,Harmonic Filter (7%) etc. complete as required |
| 472 | 1 Nos. 5 KVAR (fixed) capacitor Bank each with 7%harmonic filter with capacitor duty 32A TP contactor to carry expected current continuosly. |
| 473 | (i) All the capacitors shall be suitable for 480 V rating |
| 474 | (ii) Necessary control and firing card with proper wiring and lugs of the required rating to be provided. |
| 475 | (iii) Two nos 300 mm sweep Heavy duty exhaust fans to be provided |
| 476 | (iv) LED indication for number of capacitor banks ON & Power Factor lagging or leading. |
| 477 | (v) The APFC shall be protected from following |
| 478 | * Over-voltage & voltage unbalance * Total Harmonic Distortion |
| 479 | * Over temperature-system should be in standby mode and automatically restart after above condition restored. |
| 480 | PANEL AS ABOVE |
| 481 | DBS |
| 482 | Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator). (For all Floors LDBs,PDBs, ACDBs & UDBs)(Make-Legrand/Schneider/Siemens/Equivalent) |
| 483 | 6 way, Double door(4+18) |
| 484 | Supplying and fixing following rating MCBs/ Isolator in the existing MCB DB complete with connections,testing and commissioning etc. as required.(Make-Legrand/Schneider/Siemens/Equivalent) |
| 485 | 32 Amps, FP 10 KA MCB (C-Curve) |
| 486 | 6 Amp to 32 Amp, 10 KA SP MCB (C-Curve) |
| 487 | Cables, Cable Laying & Termination |
| 488 | Supplying & Testing of 1.1 KV grade Aluminium XLPE power cable of following size suitable for 415 Volt, 3Ph, 50 c/s supply.(Make-Havells/Polycab/KEI/Equivalent) |
| 489 | 3C X 4 sqmm |
| 490 | 4C X 6 sqmm |
| 491 | 4C X 10 sqmm |
| 492 | 4C X 16 sqmm |
| 493 | 3.5C X35 sqmm |
| 494 | 3.5C X50 sqmm |
| 495 | 3.5C X70 sqmm |
| 496 | 3.5C X120 sqmm |
| 497 | 3.5CX240 sqmm |
| 498 | Supply, laying, connecting, testing & commissioning of following sizes of FRLSH PVC insulated PVC sheathed copper conductor armoured/unarm. control cable of 1.1 KV gradeconforming to IS 1554 (Part-I) with upto date amendments etc. complete as required. Including both end termination with copper lugs, brass comprasion gland etc., ferrule numbering. |
| 499 | 12 Core x 2.5 Sqmm. |
| 500 | 3 core X 1.5 Sq.mm. (copper conductor Aromoured/unarmoured cable including termination with cu. Lugs.) |
| 501 | 3 core X 2.5 Sq.mm. (copper conductor Armoured/unarmoured cable including termination with cu. Lugs.) |
| 502 | Supplying & Testing of 1.1 KV grade Cu XLPE Un Armoured(Flexible) power cable of following size suitable for 415 Volt, 3Ph, 50 c/s supply. |
| 503 | 1C X 16 sqmm |
| 504 | CABLE LAYING |
| 505 | Laying of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1KV grade of following size direct in ground including excavation (75 cm),sand cushioning,protective covering and refilling the trench etc as required. |
| 506 | Upto 35 sq. mm |
| 507 | Above 35 sq. mm and upto 95 sq. mm |
| 508 | Above 95 sq. mm and upto 185 sq. mm |
| 509 | Above 185 sq. mm and upto 400 sq. mm |
| 510 | Laying of One No. PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of following size in the existing RCC/HUME/MASONERY TRENCH/HDPE Pipe/Metal Pipe/On Wall Surface(Clamped with saddle/PVC & UPVC Pipe)/ Cable Trayas required. |
| 511 | Upto 35 sq. mm |
| 512 | Above 35 sq. mm and upto 95 sq. mm |
| 513 | Above 95 sq. mm and upto 185 sq. mm |
| 514 | Above 185 sq. mm and upto 400 sq. mm |
| 515 | TERMINATION OF CABLES |
| 516 | Supply & Making end Termination with brass compression gland and Cu/aluminium lugs for PVC insulated and PVC sheathed cable of 1.1 kv grade (without cost of Cable) |
| 517 | 3C X 4 sqmm(19 mm) |
| 518 | 4C X 6 sqmm (19 mm) |
| 519 | 4C X 10 sqmm(19 mm) |
| 520 | 4C X 16 sqmm(28mm) |
| 521 | 3.5C X 35 sq. mm (32mm) |
| 522 | 3.5C X50 sqmm(35 mm) |
| 523 | 3.5C X 70 sq. mm (38mm) |
| 524 | 3.5C X 120 sq. mm (45mm) |
| 525 | 3.5C X 240 sq. mm (62mm) |
| 526 | Supply & making of Sigle Compression cable glands and crimping type Cu. cable lugs with required tools and equipments as per IS. The glands and lugs shall be suitable for 2XY cables. |
| 527 | 1C X 16 sqmm |
| 528 | Providing,fixing and laying of fallowing dia HDPE pipe (medium class) in ground complete withfitting incl. trenching(75 mm depth)and refilling as per direction of Engg.-in-Charge. Ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free after sales service within warranty period for acceptance of materials. |
| 529 | 50 mm dia (for Gate crossing) |
| 530 | 200 mm dia (for Road crossing) |
| 531 | CABLE TRAY |
| 532 | Supply, fabricating and installingfollowing size of hot dip G.I. perforated type cables trays including suspending from ceiling with angle, rods connection pieces, horizontal vertical bends, reducers, tees, cross members,G.I. nut bolts, G.I. washers, fasteners etc. complete as required per specifications & approved by the Engineer Incharge. |
| 533 | 150 mm (W) X 50 mm depth X 1.2 mm thickness |
| 534 | Conduits |
| 535 | Supply, delivery and laying of following sizes of 2mm thick PVC Conduit concealed in wall/ column/ roof slab of the building alongwith other accessories and 18 swg GI wire complete for Electrical Wiring/Telephone / TV & Data cable wiring as required and as per direction of Engineer-in-charge. |
| 536 | 20mm dia |
| 537 | 25mm dia |
| 538 | Miscellaneous Items |
| 539 | Supplying and fixing 3 nos GI fire bucket of 9 ltr capacity with suitable pedastal arrangement for sub-station yard etc as reqd. |
| 540 | Supplying 11 kV hand gloves as reqd. |
| 541 | Supplying and Laying Rubber mat 1M X 2M X 2.0MM thick to withstand 1.1 KV dielectric strength, Electrical Safety/Shock Chart & SLD etc as required. |
| 542 | Supplying & fixing Route Markers for LT UG Cable lines. |
| 543 | Providing and fixing LT danger notice plate of 200 mm X 150 mm, made of mild steel, at least 2 mm thick, and vitreous enameled white on both sides, and with inscription in single red colour on front side as required. |
| 544 | Supplying of First aid box as approved by St.John Ambulance Brigade/Indian Red Cross Society and confirming to IS 2217/ 1963. |
| 545 | S/F of Shock Treatment chart duly glazed mounted on Aluminum Frame with sheet glass as required. |
| 546 | Providing & fixing of M.S. angle iron with fixing materials and painting for cable racks in trenches/ on walls etc .as required. |
| 547 | S/F of Shock treatment/ restoration charts written in Hindi/ local lenguageand English duly framed and covered with 3.0 mm glass as required. |
| 548 | Supplying of Caution Boards manufactured out of 16 SWG, MS sheet of 450mmx 300mm size duly painted white and having `MAN ON LINE\" and \"DO NOT SWITCH ON\" written in Red complete with hanging arrangement as required and& approved by the Engineer Incharge. |
| 549 | External Light Fittings |
| 550 | Supplying, installation testing and commissioning following type of external light fixtures with all accessories as required. |
| 551 | 60 Watt Outdoor LED Luminaires Street Light (6500 lumen) PHILIPS (CAT No:Make: Philips BRP062 LED 65 CW SLA S1 PSU) / Equivalent of Bajaj/ Wipro/Havells connected to 32 MM Dia 800 mm GI bend pipe fixed on Wall or column with GI Clamps & hard ware etc. as required. |
| 552 | Gate Light (Make: Bajaj Spigot for BJMPTI 125 MV LPF CAT No: HPMV 125 W or equivalent of Philips/ Wipro/Havells)along with loose wire box, connectors with one 10A MCB as required suitable for operation on 240 Volt AC supply as required. |
| 553 | Feeder Pillar for External Lights |
| 554 | Supplying installation testing commissioning of double door feeder pillar fabricated out of 2 mm thick CRCA sheet duly painted, 200 Amp Al busbar with neutral bus rincluding cc/ brick foundation as required including following internal fixtures. |
| 555 | 1 No - 32 Amp TPN MCB Incomer (C-Curve) |
| 556 | 4 Nos - 16 Amp SP MCB Outgoing (C-Curve) |
| 557 | 1 No - 16 Amp SP MCB with 6/16 Amp socket outlet with 10 Amp modular switch and 1 No- Bracket Holder with 6 Amp Modular switch. |
| 558 | Lightning Protection System (Arrestor) |
| 559 | Providing and fixing of lightning conductor finial, made of 25 mm dia 1000 mm long, Solid Copper , having multiple prong at top, with 85 mm dia 6 mm thick copper base plate including holes etc. Along with Test junctioncomplete as required. |
| 560 | Earthing |
| 561 | Supply & Fixing of Copper plate Earthing (600x600x3mm thick) including accessories, and providing masnory enclosure with cover plate having locking arrangement and watering pipe of 2.7 meter long etc. with charcoal/coke and salt as required. |
| 562 | Providing and fixing 25 mm X 5 mm copper strip in 40 mm dia GI pipe from earth electrode including connection with brass nut, bolt, spring, washer excavation and refilling etc. as required. |
| 563 | Providing and fixing 25 mm X 5 mm dia copper strip on wall/surface or in recess for connection etc. as required. |
| 564 | Providing and fixing 4.0 mm dia cu wire on surface or in recess for loop earthing as required. |
| 565 | Fire Extinguishers |
| 566 | Supplying installation testing and commissioning of ABC type fire extinguishers of 6 kg capacity confirming to IS:14609 including cost of all material & labour for all floors & service building etc. all complete. Make-MINIMAX/CEASEFIRE/SAFEX/SAFEFIRE/SAIEX or equivalent |
| 567 | Supplying, installation, testing and commissioning of CO2 type Fire Extinguisher 4.5 kg capacity confirming to IS: 2878 made from ISI marked seamless cylinder confirming to IS: 7285, fitted with ISI marked controlled valve confirming to IS: 3224, high pressure 1mtr discharge hose & horn complete with initial gas charged with carrying handle & wall mounting bracket for all floors & service building etc. as per direction of Engineer-in-charge.Make-MINIMAX/CEASEFIRE/SAFEX/SAFEFIRE/OMEX or equivalent |
| 568 | Supplying, installation, testing and commissioning of Mechanical Foam type 9 litre capacity Fire Extinguisher,ISI marked, IS: 10204, containing 540 ml AFFF liquid ISI marked, IS: 4989 Part II and a polyurethane coated CO2 Gas Cartridge, ISI marked, IS: 4947 complete with gunmetal union cap, nylon hose with plastic foam making branch and wall mounting bracket as per direction of Engineer-in-charge. |
| 569 | Fire Pump , Down Comer System And Other Accessories |
| 570 | Supplying, installation, testing and commissioning of Electric Motor DrivenPressurization Pump complete with Pump Set, Electric Motor, Base Frame and with 1 no. pressure switch, 1 no. pressure gauges, 2 nos. Butterfly valves, 1 no. NRV . PCC foundation and foundation bolts as per required for downcomer and system complete with Copper interconector from pump panel to pump drawn through PVC Rigid/Flexible Conduit(Maximum distance 5 meter) as required. Make- KIRLOSKAR/ WILO/ GRUNDFUS or equivalent |
| 571 | i) Flow rate: 450 Ltrs/Min , 2840 RPM |
| 572 | ii) Head: 35 Meter |
| 573 | iii)Type: Single Head |
| 574 | Providing, fixing, testing and commissioning of precharged air vessel (size 450 mm dia & 1500 mm height) fabricated shell from 8 mm thick & dished end 10 mm thick M.S. Plate for pressurization of hydrant system complete with adequate pressure switches (as per design / requirement) with valve to operate as per operating sequences including 25 mm dia drain valve, air release valve with ball cock on top, 25mm diainlet with isolating valve duly painted from inside and out side complete as required. |
| 575 | MCC Panel |
| 576 | Supply, installation, testing and commissioning of Wall mounted sectionalised, front operated top entry dust and vermin proof M.V.Panel Boards suitable for operation at 415V, 3 phase, 4 wire, 50Hz distribution system fabricated out of 2.0 mm thick CRCA sheet, compartmentalised with hinged lockable doors, dust and vermin proof, powder coated of approved shade after 7 tank treatment process, cable alley, insulated busbar with heat shrienkable PVC sleeve, base channel, complete with all accessories including interconnections, proper earthing etc as required. Make:-LEGRAND, L&T, Siemens or equivalent. |
| 577 | One (1)- 32 Amp, 10 KA,4P MCB with 3 Nos Phase indicating lamps with control fuse/ MCB,Digital Voltmeter & Ammeter with selector switch suitable for motor duty. |
| 578 | One (1) - DOL with O/L and Single Phasing Preventor suitable for 7.5 HP motor. ON/OFF indication lamps, Auto manual switch and ON/OFF push button. |
| 579 | One (1) - Set of Auxilliary relay for automatic operation through pressure switch. |
| 580 | Panel As Above |
| 581 | Supply, laying, connecting, testing & commissioning of following size of 1.1 kv grade multicore aluminium/ copper conductor XLPE insulated PVC sheathed armoured cable as per IS: 7098:1988 (Part-I) with upto date amendments etc. complete as required. Tagging on both the ends will be done with aluminium tags etc. complete as required.(Quantities as per site requirement shall be finally estimated & executed accordingly with prior approval.) |
| 582 | 3 core x 10 sqmm Al. Ar. XLPE Cable (Fire Fighting MCC Panel to Terrace Pump Set) |
| 583 | Supplying and making indoor end termination with brass compression gland (Heavy duty) and suitable copper / aluminium lugs for following size of XLPE insulated PVC sheathed copper/ aluminium conductor armoured/ unarmoured cable of 1.1 KV grade including cost of ferrules, cable sockets, insulation tape & other accessories etc. complete as required. |
| 584 | 3 core x 10 sqmm Al. Lugs |
| 585 | Providing and fixing following size of GI strips/ GI wire etc. on surface or in recess for connections, including GI clamps etc. as required. |
| 586 | 25 mm x 5 mm GI strip |
| 587 | 6 SWG dia G.I. wire |
| 588 | Providing, laying, testing & commissioning of \"C\" class heavy duty MS Pipe conforming to lS 3589 and 1239 including fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc.,fixing the pipe on the wall/ceiling with proper core cutting & filling with treatment, providing proper supports,using clamps and painting with two or more coats of synthetic enamel paint of required shade complete as required. Make:- SAIL/TATA/JINDAL or equivalent |
| 589 | 100mm dia (Heavy class) as per IS-1239(Part-I)/2004 |
| 590 | 80mm dia (Heavy class) as per IS-1239(Part-I)/2004 |
| 591 | Providing, fitting & fixing of following size cast iron double flanged slim seal wafer type Butterfly valves with EPDM rubber lined with lever operated as per IS-13095 with ISI mark of pressure ratting PN-1.60 including fixing the same with supply of required jointing materials like rubber insertion, MS nuts & bolts, paint etc. and testing the joints with required water pressure for all floors etc. all complete as per specification & direction of E.I.C. Make-KIRLOSKAR/IVC/ZOLOTO/KARTAR/HONEYWELL or equivalent |
| 592 | 80mm NB |
| 593 | Providing, fixing, testing and commissioning of following size cast iron double flanged type Non Return Valve as per IS- 5312 (Part 1): 2004 with ISI mark of pressure ratting PN-1.60 including fixing the same with supply of required jointing materials like flanges, rubber insertion, MS nuts & bolts, paint etc. and testing the joints with required water pressure etc. all complete as per specification & direction of E.I.C. Make-KIRLOSKAR/IVC/ZOLOTO/KARTAR/HONEYWELL or equivalent |
| 594 | 80mm NB |
| 595 | Providing, fixing, testing and commissioning of 25 MM C.I. single Air Relief Valve with stop cock confirming to IS:14845/2000 with ISI mark for water works purpose including fixing the same with hydrant riser including testing & commissioning the system etc. all complete as per approved specification & direction of EIC. Make-KIRLOSKAR/IVC/ZOLOTO/VENUS/HONEYWELL or equivalent |
| 596 | Providing, fixing, testing and commissioning of 25MM SS Ball Valve suitable for test pressure of not less than 15kg/sqcm with nuts, bolts, gaskets, necessary accessories etc. all complete as per approved specification & direction of EIC. Make-KIRLOSKAR/IVC/ZOLOTO/VENUS/HONEYWELL or equivalent |
| 597 | 25mm |
| 598 | 1/2 inch |
| 599 | Providing, fixing, testing and commissioning of 2 Way Fire Brigade inlet 63MM dia of CI body with 2 No. Gun Metal male instantaneous inlet couplings complete with cap and chain as required. For 100 mm dia M.S. Pipe connection conforming to lS : 904 as required With brick platform & duly painted with Post office red externally and white internally with synthetic enamel paint cornplete in all respect, for external hydrant, as required. (Fire Brigade inlet) Make:- KARTAR/NEWAGE or equivalent |
| 600 | Supply, Installation, Testing & Commissioning of Pressure gauge of 0-16 Kgf/sq.cm. range with cut-off bronze ball valves below of suitable size with all accessories as per direction of Engineer-in-charge. Make:- H-GURU/ALTRON or equivalent |
| 601 | Supply,Installation,Testing & Commissioning of Pressure Switch with cut-off bronze ball valves with integral strainer & flare nut (mixed ends) of suitable size with all accessories as per direction of Engineer-in-charge. |
| 602 | Supply, Installation, Testing & Commissioning of Swinging pattern wall fixing first aid hose reel made from MS sheet and waterways and moving parts with rubber hose of 20 mm dia. and 30 Rmt long with ABS(Plastic) shut-off Noszzle as per IS: 444/IS: 12585 Type-I., complete with all accessories as per direction of Engineer-in-charge.Make:- KARTAR/NEWAGE or equivalent |
| 603 | Supply,Installation,Testing & Commissioning of Stainless steel Hydrant Valve / Landing valve, of 63 mm NB size, type-A, single headed , oblique type, as per IS :5290/93 and as per direction of Engineer-in-charge. |
| 604 | Supply,Installation,Testing & Commissioning of SS short branch pipe with 63 mm male inlet and 19 mm outlet Noszzle, as per IS:903 and as per direction of Engineer-in-charge. |
| 605 | Supply,Installation,Testing & Commissioning of 63 mm NB and 15Rmtt long RRL Fire Hose fitted with63mm intstantaneous stainless steelmale & female SS coupling, complete by GI wire binding for Internal Hydrant as per direction of Engineer-in-charge. |
| 606 | Providing supply & fixing of MS Hose Box for of suitable size(750X600X250mm) to accomodate 2 Nos. of 15/ 1 Nos of 30 Rmtt long fire hose and a branch pipe, wall mounted type as per direction of Engineer-in-charge. |
| 607 | MANUALLY OPERATEDELECTRIC FIRE ALARM SYSTEMS: |
| 608 | Supplying, installation, testing & commissioning of heat detector operating at 54ºC/57ºC with rate of rise cum fixed temperature (dual thermistor) type with mounting base complete with all connection etc. as required. |
| 609 | Supplying, installation, testing & commissioning of smoke detector with builtin LED and mounting base complete with all connections etc. as required. |
| 610 | Supplying, installation, testing & commissioning of manual call boxes of MS construction in surface/recess with stainless steel chain & hammer assembly complete with glass and push button etc. as required. |
| 611 | Supplying, installation, testing & commissioning fire alarm sounder with facility to make announcement, mounted in M.S. box (16 SWG) with hinged cover plate & suitable for operation with amplifier i/c line matching transformer etc. complete as required. |
| 612 | Supplying, installation, testing & commissioning of main control and indicating panel made out of 16 SWG MS sheet to accommodate the following items duly powder coated in approved colour with louvers for ventilation, locking arrangement, audio and visual indication for fire alarm and public address system, monitoring system including connections, interconnections etc complete as required. 6 zone panel for fire alarm system 100 watt amplifier racks suitable for operation on 230V AC/24V DC supply conforming to IEC-268-3 complete with all Talk back master station with LED PTT (press to talk) push button for operation on 230V AC/24 V DC supply conforming to IEC-268 for simplex mode of operation/communication suitable for 20 Nos.talk back unit -1 set. Annoucement control desk suitable for selection of different zones selectively and ON ALL CALL switch with visual indication etc., complete as required- 1 set. Amplifier change over switch for inter changing amplifier- 1 No. Monitor panel for loudspeaker complete output selector ON/OFF switch, fuse visual indications etc. complete as required- 1 No. Gooseneck microphone with stand and ON/OFF switch -1 No. Mains ON/OFF switch, fuse indication lamps, DC and AC voltmeters & ammeters terminal blocks etc. complete as required -1 set. Battery charger trickle cum boost to take complete load of fire alarm & PA system complete with all accessories including providing & fixing of 2 nos. 12 volt,30 AH each sealed maintenance free batteries -1 set. |
| 613 | Supplying installation testing and commissioning of a pair of 1.5 sq.mm single core flexible copper cable (2X1.5sq mm) to be laid within Existing MS conduit of suitable size to be erected above the wall or concealed, as the case may be, with all accessories as per direction of Engineer-in-charge. |
| 614 | Supply, delivery and laying of following sizes of PVC Conduit in surface/ in recess alongwith other accessories and 18 swg GI wire complete for Fire Alarm wiring including painting as required and as per direction of Engineer-in-charge. |
| 615 | 25mm dia |
| 616 | MISCELLANEOUS WORK : |
| 617 | Single sided EXIT LED Light fitting signage(both side visible) with built in battery back-up for 2 hrs with proper wiring with PVC conduiting from the existing power sources for all floors etc. Make:- BAJAJ (CAT No : BESL O3 LED SSD WBB Green) / Equivalent of Crompton/ Wipro/ Philips |
| 618 | Data Net Working, Telephone(IP EPBX) & CCTV System |
| 619 | Supply,Installation,Testing & Commissioningof 4 pair Cat6 U/UTP Cablein the existing surface/ recessed steel/ PVC conduit as required: The 4 pair Unshielded Twisted Pair cable shall be UL Listed,exceeds the requirements of ANSI/TIA-568-C.2 and ISO/IEC 11801 Class E , 4 twisted pairs separated by internal PE Cross Separator. Full separator. Half shall not be accepted. Rip Cord is must,Insertion Loss of 32.8 db/100m at 250 MHz ,Cable should support operating temperature from -20° to +70°C Cable support Conductor Resistance = 9.38 O/100m Max., Cable support Delay Skew: < 45 ns/100m, Operating Voltage: 72V , Impedance: 100 ± 15 O @100 MHz. and Propagation Delay @250 MHz : 536 ns/100m, ETL Verified 4 connector channel performance up to 700 MHz , RoHS Compliant. Make: Tyco / Legrand / Panduit |
| 620 | Supply,Installation,Testing & Commissioningof Cat6 I/O with Face plate: The Outlet shall meet or exceed requirementas per ANSI/TIA 568C.2,ISO/IEC 11801, & EN50173.The information outlet NEXT, PSNEXT, FEXT, ELFEXT, PSELFEXT and return loss should be verified for CAT6 @ 250Mhz & CAT6A @ 500Mhz. The information outlet connector shall be of gold/nickel, thickness of gold > 0.8 µm. The connectors shall be compatible as per IEEE 802.3af standard for POE application. The PVC material of Face plate should complie ABS /UL94-V-O certified.Make: Tyco / Legrand / Panduit |
| 621 | I/O Dual |
| 622 | I/O Single |
| 623 | Supply,Installation,Testing & Commissioningof Cat 6, 24-portloaded, 1U Modular Jack Panel Should accommodate Cat6 with Rear Cable Management and Front removable Tooless Information outlet. Should have easy clip management with labels and clear label covers, Made with of Dicast Aluminium Alloy Material and Non Corrosive with Cat6 toolless RJ45 x 24 ports with color code front panel with patch cord locking. Make: Tyco / Legrand / Panduit |
| 624 | Supply and installation of Cat6 UTP 24 AWG Patch Cord Patch cord: 6 UTP Patch Cords are Factory Tested for Better Quality and Suitable for the High Speed Data Transmission. Complies to theStandard ANSI/TIA/EIA-568-C.2 Standard. Supports Data Networks Speeds Up to 10/100-Base-T and 1000-Base-T. Available In LSZH Jacket- Reduced Toxic Gasses Emitted During Combustion ,RJ45, 8P8C, 2 FORK 50µ’’ Gold Plated Contacts ,100% Factory Tested ,Transparent Boot Cable Assemblies. Make: Tyco / Legrand / Panduit |
| 625 | 1mtr Lenghth |
| 626 | 2mtrs Length |
| 627 | Supply,Installation,Testing & Commissioningof L-2 Managed Switch with minimum 24 X 10/100 Base-T ports and additional 4 nos. SFP upl ink ports , Switch should have mia 56 Gbps Switching Fabric and I6K MAC Address, Support 1Pv6 Management , support LEEE 802.17/equivalent for sub 50ms ring protection, lGMP and MLD snooping, Operating temperature 0 to 50 degree C, Shou ld support CLl, GUl, USB or equivalent interface for talcing backu p, UDLD and single LP management of min 24 switches. Make: Cisco/HP/Netgear/Digisol |
| 628 | Supply,Installation,Testing & Commissioningof24x 10/100/1000 Ethernet L2 Fully Managed Switch with 370W PoE budget, 4x 1G SFP uplinks. Switch should support 802.1Q VLAN, MSTP, L2 & L3 . All hardware should supplied with necessary mounting brackets and IN power cord with 3 years warranty. Make: Cisco/HP/Netgear/Digisol |
| 629 | Supply,Installation,Testing & Commissioningof24x 10/100/1000 Ethernet L3 Fully Managedphysically stackble Switch with 4x 1/10G SFP+ uplinks. Switch should support 802.1Q VLAN, MSTP, L2 & L3 ACLs, L3 static and Dynamic routing and redundancy features like RIP, OSPF, HSRP for IPv4 and IPv6 protocol stack with Dedicated USB managed ports All hardware should supplied with necessary mounting brackets and IN power cord with 3 years of comprehensive onsite warranty. Make: Cisco/HP/Netgear/Digisol |
| 630 | Supply,Installation,Testing & Commissioningof 1000BASE-LX/LH SFP transceiver module,SMF, 1310nm, 9/125 um Single mode Fiber Type up to 20 KM.Make: Cisco/HP/Netgear/Digisol |
| 631 | Supply,Installation,Testing & Commissioningof 6 core Single mode OS2 Unitube Armoured Optical fiber cable through existing conduit:The Fiber should be OS2 Single Mode Optical Fiber Cable of Size 9/125µm.Outdoor Corrugated Steel tape Central loose tube. ( Standard Approved: ISO 11801 2nd edition/EN 50173-1:2002 / IEC 60794-1/IEC 60793-2-50 class B1.3 / EN 60793-2-50: class B1.3 /ITU Recommendation G.652.D - the oder ITU designations A, B and C are also fulfilled / OS1/ISO/IEC 24702:2006, cat. OS2; also OS1 requirements are fulfilled/IEEE 802.3 - 2002 incl. 802.3ae )Jacket. Make: Tyco / Legrand / Panduit |
| 632 | Supply,Installation,Testing & Commissioningof 12 Port Rack mount Draw Type Loaded LIUavailable in Standard 19” ,Dimensions (mm) : 430 X 220 X 1U ,Cold Rolled Steel as Raw Material , Consist of Top Cover and Bottom Panel , Easy to Assemble and Dissemble ,Three Types of Input Holes Cable Entry Through Water Proof Cable Clamp ,12 Duplex SC or LC Adapter Interface , Splice 24 Fibers at Most with 1 Tray ,ADAPTER, SM, SIMPLEX SC, PC TYPE ,Support the TIA/EIA Telecommunication Wiring Standards. Compact Design ,Telcordia GR-326-Coreand PIGTAIL, SM (OS2), SIMPLEX SC, PC TYPE, 2M, LSZH,Insertion Loss : <= 0.2 db, Max 0.3db/MTRJ: Max 0.5db Return Loss : PC>= 45db, UPC>=50db, APC>=60db ,LSZH Jacket-Reduced Toxic Gasses Emitted During Combustion ,100% Factory Tested , Low Insertion Loss and Return Loss. Make: Tyco / Legrand /Panduit |
| 633 | Supply,Installation,Testing & Commissioningof OFC PATCHCORD, SM (OS2), DUPLEX LC-SC, PC TYPE, 2M, LSZH Fiber Optic Single Mode OS2 Patch Cords are offered in LSZH Jackets with Corning Fiber,Insertion Loss : <= 0.2 db, Max 0.3db/MTRJ: Max 0.5db Return Loss : PC>= 45db, UPC>=50db, APC>=60db. Make: Tyco / Legrand / panduit |
| 634 | Supply,Installation,Testing & Commissioningof 42U Floor MountServer Rack with Accessories: Size - 800 Width x 1000 Depth, Construction-Modular Constuction of the rack made of 4 vertical , 4 horizontal& 4 depthaluminum alloy extruded multifolded hollow profiles bolted and joined together with Links and Corner Block. 3 pairs of support channel to equate the load evenly and castor provision at bottom side, front and rear door of sheet steel, with foamed-in seal, special honeycomb punching pattern Single point and multi point locking rod, Floor Standing Panel on 3 Inch Height castors with brake, Accessories-1no Sheet steel, duly powder coated texture finish -700D, Power Distribution Unit - 06/16 Amp Indian-Standard - 12 Socket - Single Pole / Screw Mountable / 32 Amp MCB / Alternating Current -Industrial Plug 32A with Power Cable 6 sq.mm 3 meter Length, 1no Metal cable manager with PVC cable loops, 4nos cooling Fan(230V AC - 90 CFM, dB 42), H/W Screw Packet(20sets), Painting Shade-RAL 7035/7037 Fine Texture– 60 to 80uM. RAL 7037 for Frame structure and RAL 7035 for other parts, Corrosion Resistance-Salt spray test according to ISO 9227 (NSS test) and IEC EN 60068-2-11 (Ka test) for 168 hours: degree of Rusting Ri1 according to ISO 4628-3, propagation =1 mm according to ISO 4628-8, Compliance with standards-UL 2416., DIN 41494, IEC EN 60529, IEC EN 62262 , IEC EN 60068-2-11 , ISO 9001:2008. Make: Valrack/Rittal/ APW |
| 635 | Supply,Installation,Testing & Commissioningof 12U/500D Wall Mount Rack with Accessories: The rack size should be 600W x 500D, Front frame integrated with top, bottom, front and two side panels for better rigidity and strength, Front Glass Door with Lock loaded, Compliance with standards shall be UL 2416., DIN 41494, IEC EN 60529, IEC EN 62262 , IEC EN 60068-2-11 , ISO 9001:2008 including Power Distribution Unit (06/16 Amp Indian-Standard - 06 Socket - Single Pole / Screw Mountable / 16 Amp MCB / Alternating Current - 16 Amp 3 Pin Plug with Power Cable 2.5 sq.mm 3 meter Lengt), 1 cooling Fan(230V AC - 90 CFM, dB 42), 2nos 1U Metal Cable manager with Plastic cable loops and H/W screw. Make: Valrack/Rittal/ APW |
| 636 | Supply,Installation,Testing & Commissioningof IP PBX System support up to 2000 users and minimum60 concurrent calls, integrated 4 PSTN trunk FXO ports through External Gateway, 4 analog telephone FXS ports with lifeline capability and up to 50 SIP trunk accounts, Gigabit network ports with Integrates PoE, USB, SD card, Supports up to a 5-level IVR (Interactive Voice Response), Supports any SIP video endpoint that uses the H.264, H.263 or H.263+ codecs. Make: Grandstream/NEC/Matrix |
| 637 | Supply,Installation,Testing & Commissioningof IP Based PoE Phone, 2 SIP accounts, 2 line keys, 3-way conferencing, 3 XML programmable context-sensitive soft keys, Dual-switched 10/100 mbps ports, integrated PoE, HD audio on speakerphone and handset.Make: Grandstream/NEC/Matrix |
| 638 | Supply,Installation,Testing & Commissioningof 4MP Dome IR Network Camera (1/3\" CMOS sensor, Mini. Pixel of 2688*1520 or higher video quality, frame rate of Up to 25fps, Ultra 265, H.265, H.264 & MJPEg video compression, 2.8mm Fixed lens, physical ICR filter of both day and night, 30mtr IR Distance,120dB WDR ,3Streams Supported, WDR , 3D-DNR for noise reduction, BLC, ICR, EXIR, Audio In and Out, Alam in and Out. IPv4/IPv6 network supported, IP67, IK10 rated for weatherproofing, ONVIF ver 2.2 or higher, PoE IEEE 802. 3af (UL, FCC, CE, BIS certified.) with accessories as require. Make- Honeywell/UNV/Milesight/SIT |
| 639 | Supply,Installation,Testing & Commissioning of 4MP Bullet IR Network Camera (1/3\" CMOS sensor, Mini. Pixel of 2688*1520 or higher video quality, frame rate of Up to 25fps, Ultra 265, H.265, H.264 & MJPEg video compression, 2.8mm Fixed lens, physical ICR filter of both day and night, 30mtr IR Distance,120dB WDR ,3Streams Supported, WDR , 3D-DNR for noise reduction, BLC, ICR, EXIR, Audio In and Out, Alam in and Out. IPv4/IPv6 network supported, IP67, IK10 rated for weatherproofing, ONVIF ver 2.2 or higher, PoE IEEE 802. 3af (UL, FCC, CE, BIS certified.) with accessories as require. Make- Honeywell/UNV/Milesight/SIT |
| 640 | Supply,Installation,Testing & Commissioningof 4MP Motorised Verifocal Bullet IR Network Camera (1/3\" CMOS sensor, Mini. Pixel of2688*1520 or higher video quality, frame rate of Up to 25fps, Ultra 265, H.265, H.264 & MJPEg video compression, 2.8-12mm Fixed lens, physical ICR filter of both day and night, 50mtr IR Distance,120dB WDR ,3Streams Supported, WDR , 3D-DNR for noise reduction, BLC, ICR, EXIR, Audio In and Out, Alam in and Out. IPv4/IPv6 network supported, IP67, IK10 rated for weatherproofing, ONVIF ver 2.2 or higher, PoE IEEE 802. 3af (UL, FCC, CE, BIS certified.) with accessories as require. Make- Honeywell/UNV/Milesight/SIT |
| 641 | Supply,Installation,Testing & Commissioningof 2MP IP PTZNetwork Camera 1/2.8\" CMOS, ICR, 1920x1080:30fps, Ultra 265/H.264/MJPEG, Triple streams, DC12V, Micro SD card slot up to 256gb,-40-65 °C, IP66, 25x optical zoom(5.2~ 125mm), IR range: up to 150m, IR anti-reflection window IP66 rated for weather proofing, ONVIF, POE IEEE 802.3af (UL, FCC, CE, BIS certified).Make- Honeywell/UNV/Milesight/SIT |
| 642 | Supply,Installation,Testing & Commissioningof 64Ch Network Video Recorder, Support Ultra H.265/H.265/H.264 video formats Supports mainstream cameras of ONVIF conformance(Profile S, Profile G, Profile T and RTSP protocols. Support 2-ch HDMI, 1-ch VGA. HDMI1 and HDMI2 up to 4K (3840x2160) resolution Up to 12 Megapixels resolution recording. Support RAID 0, 1, 5, 6, 10, 8 SATA HDDs, Up to 10TB for each HDD. Support cloud upgrade.Make- Honeywell/UNV/Milesight/SIT |
| 643 | Supply,Installation,Testing & Commissioningof 8TB Surveillence Hardisk. Make: Segate/ WD/ Toshiba |
| 644 | Supply,Installation,Testing & Commissioningof 55\" UHD IPS Commercial Digital Display, Brightness (330 nits or higher), Dynamic Contrast Ratio (Dynamic MCI (Hz)):1000000:1), 1000000:1, Static (Panel) Contrast Ratio-1200:1, Response Time (G to G)-8 ms, Refresh Rate.-60 Hz, Life span (hrs)-30,000, Speaker (Sound Output):10W + 10W, Speaker System: 2.0 ch, DVB-T2/C Broadcasting System, Commercial Smart UX, webOS version (webOS 6.0), BIS Certification with 3 years onsite warrenty. Make: Samsung/ LG /SONY |
| 645 | Air Conditioning |
| 646 | Supply, Installation, Testing and commissioning of Three Phase/ Single phase INVERTER Cassette (Ceiling mounted IDU) Air conditioners with all fixing accessories, first fill of ecofriendly refrigerant (R32 or R410A) and electrical wiring between indoor and outdoor units complete. Piping to be laid through nitrile rubber sleeve with white taping and to be clamped neatly. Wall openings are to be sealed and finished using cement plastering. Make : BlueStar/Carrier/DAIKIN/Voltas/ Mitsubhish/Hitachi |
| 647 | Capacity 3.0TR Inverter Cassette AC3 phase with scroll/rotary/swing Compressor (Banking Hall) (Excluding cost of copper piping) |
| 648 | Supply, Installation, Testing & Commissioning of 1.5 Ton capacity Single Phase, 5 -Star rated Inverter Hi-wall Split AC with 4KVA stabilizer (BEE: 5star rated Make: V Guard) all copper condenser & evaporator coils and with cordless remote control including cost of copper piping upto 3 metre. The Piping to be laid through sleeve with white taping and to be clamped neatly. Wall openings are to be sealed and finished using cement plastering. Make : BlueStar/Carrier/DAIKIN/Voltas/ Mitsubhish/ Hitachi |
| 649 | Supply & erection of copper piping using copper refrigeration pipe complete with elbows, bends, supports, Insulation etc. interconnecting indoor and outdoor units(both suction and discharge lines shall be measured together as single unit) along with necessary electrical copper wiring through 20mm rigid PVC Pipe. Insulation using 4mm thick nitrile rubber sleeve insulation with teflon taping. (for cassette AC and beyond 3meter for split AC) |
| 650 | Supply and erection of 25mm dia insulated PVC drain water piping (4kg/sq.cm) upto just above ground level for all Acs including Split Acs and its insulation using 4 inch thick nitrile rubber sleeve insulation. |
| 651 | Supply and installation of readymade powder coated MS stand/angle heavy duty support for Cassette & split AC outdoor units. |
| 652 | SITC of communication cable ( control and power connection) for interconnection between IDU &ODU as specified by the manufacturer measured as running meter (single unit) |
| 653 | Supply and erection of 4 inch dia (4kg/sq.cm)PVC piping between indoor unit for taking the insulated suction, liquid and drain lines. The piping to be laid with enough slope and to be suspended using threaded rods. |
| 654 | Approved for 147 ( One hundred Forty Seven items only |
AI Tender Summary
Tender Timeline
Jun 13, 2023
11:30 IST
Tender Published
Tender notice published.
CompletedJun 27, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJun 28, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender