Tender For Construction Of Kitchen-Cum-Dining Hall Inside Campus Of Oav At Darpan For The Year 2023-24
Tender Value
38.55 Lakhs
Estimated cost
Bid Submission
22 Jun 2023
0 days left
EMD
38600
Bank guarantee accepted
Document Fee
6000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
badachana → Odisha
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of Kitchen-Cum-Dining Hall Inside Campus Of Oav At Darpan For The Year 2023-24
BOQ
| Sl. No. | Item Description |
| 1 | Earth work excavation in foundation trenches in all kinds of soil including hard moorum stony earth mixed with stone and boulders (except sheet rocks and boulders required blasting) including dressing and leveling the bed up to required depth and depositing the excavated materials at places away from work site with all leads and lifts T&P shoring shuttering dewatering if required etc. complete as per direction of the Engineer-in-charge. |
| 2 | Supplying filling clean dry sand of approved from approved quarry in foundation, plinth & core with sand in layers not exceeding 150mm thick including watering, ramming, cost, conveyance, royalty and taxes of all materials and cost of all labour T&P required for the work etc. complete (measurement will be taken on finished compacted section only). |
| 3 | Back filling with excavated earth in layers not exceeding 150mm thick including watering ramming, cost conveynace of water and cost of all labour T&P required for the work etc complete (measurement will be taken on finished compacted section only) |
| 4 | Providing supplying diluting injecting chemical emulsion for existing building anti-termite treatment both sides below masonary walls existing floors, point of contact of wood work by chlorphyritos 20EC emulsion emulssifilable chemical as per manufactures specification including drilling & plugging holes of 6mm dia holes at 300mm C/C to walls to a depth of 200mm with making good to the holes with C.M (1:4) after treatment including cost of all materials labour T&P required for the work as perIS 6313 (part-III) second revision complete the work is to be executedas per specification anddirectionof the Engineer-in-Charge. |
| 5 | Cement concrete (1:4:8) in foundation and floors using 4cm(1½”) size hard crusher broken granite stone metal of approved quality and from approved quarry including lowering, laying concrete watering, curing etc, complete to required levels laid in layers not exceeding 0’-6” thick including cost, conveyances, royalties, taxes of all materials and cost of all labour with T&P required for the work etc, complete as per specification & direction of the Engineer-in-charge. |
| 6 | RCC M-20 usingblack hard granite crusher broken chips of 10mm to 20mm size (10mm 40% and 20mm 60% ) of approaved qualityfrom approved quarry to achieve the minimum compressive strength of 200kg/cm2 250kg/cm2, 3.00 kg/cm2 of 150mm size cubes on 28 days test confirming to codal provision including hoisting lowering and laying concrete in layers not exceeding 15cm thick compacting in vibrators and watering for 28 days including centering shuttering from works finishing the exposed surface smooth providing grooves where necessary including cost conveyance royalty taxes of all materials with all leads and lifts and cost of all labour T&P mechineries required for the work de-watering if necessary compalete in all respect as directed by Engineer-in-charge including dismantling the centering and shuttering but excluding cost conveaynce of MS rod or tor steel & bind wire and labour charges for strengthening cutting beinding binding wilding and tying the grills etc hoisting and placing in positing (to be paid separetely for RCC work) A. COLUMN BASE |
| 7 | B. PLINTH BAND |
| 8 | C. COLUMN AND BEAM |
| 9 | D. LINTEL |
| 10 | D. ROOF SLAB |
| 11 | E. CHAJJA |
| 12 | F. FIN WINDOW SIDE |
| 13 | Straightening the coiled or bent up M.S. rod / HYSD bars confirming to Gr. S 240 or S 415, cutting bending binding lapping placing welding etc. (Confirming to ISI specification) and jointing if necessary by lapping and tying the grills and placing in position as required for RCC work as per approved design hoisting lowering and laying in position including cost conveyance & taxes of M.S. rod / tor steel and binding wire of 18 to 20 gauge (as approved by the deptt.) weight of over lapping, coping, welded joints, spear bar, chair, stage, hanger andbinding wires shall not be considered for payment at all. Standard co-efficient of different size of the steel shall be considered. Welding & lapping should be confirming to relevant clause of IRC 1987. |
| 14 | 2.5cm thick grading concrete (1:2:2) using 6mm thick crusher broken hard granite chips with cost, conveyances, royalties, taxes of all materials and cost of all labour with T&P required for the work etc. complete as per specification & direction of Engineer-in-charge |
| 15 | Fly ash Brick masonry using Fly ashBricks in FOUNDATION AND PLINTHhaving crushing strength not less than 75Kg/sqcm in cement mortar (1:6) after immersing the bricks for six hours in water before useincluding splays, cutting, circular moulding, corbelling, champhering and similar such type of works,scaffolding, watering, curing, including cost, conveyances, royalties, taxes of all materials and cost of all labour with T&P required for the work etc. complete as per specification & direction of Engineer-in-charge. |
| 16 | Fly ash Brick masonry using Fly ashBricks in SUPERSTRUCTURE having crushing strength not less than 75Kg/sqcm in cement mortar (1:6) after immersing the bricks for six hours in water before useincluding splays, cutting, circular moulding, corbelling, champhering and similar such type of works,scaffolding, watering, curing, including cost, conveyances, royalties, taxes of all materials and cost of all labour with T&P required for the work etc. complete as per specification & direction of Engineer-in-charge. |
| 17 | Providing 16mm thick cement plaster in cement mortar (1:6)finished smooth to inside rough surface of brick walls after racking out joints, scrapping & cleaning the surface & finishing the plaster surface smoothwatering, curing, scaffolding, screening sand etc. complete with cost, conveyances, royalties, taxes of all materials and cost of all labour with T&P, sundries required for the work etc. complete as per specification & direction of Engineer-in-charge. |
| 18 | Providing 12mm thick cement plaster in cement mortar (1:6)finished smooth to out side rough surface of brick walls after racking out joints, scrapping & cleaning the surface, watering, curing, scaffolding, screening sand etc. complete with cost, conveyances, royalties, taxes of all materials and cost of all labour with T&P, sundries required for the work etc. complete as per specification & direction of Engineer-in-charge. |
| 19 | Providing 6mm thick cement plaster in cement mortar (1:4)finished smooth in ceiling & finishing the plaster surface smooth using wooden float only to proper plumbs & level and making necessary grooves, beads & drip course to give required ornamental finish as per drawing, watering, curing, scaffolding, screening sand etc. complete with cost, conveyances, royalties, taxes of all materials and cost of all labour with T&P, sundries required for the work etc. complete as per specification & direction of Engineer-in-charge. |
| 20 | Finishing the wall surface with Acrylic Wall putty (water based) of approved make and finished smooth & even surface to receive painting including cost of scaffolding staging charges with cost, conveyances, taxes of all materials, cost of labour, T&P required for the work etc. complete for all floors as per specification & direction of the Engineer-in-charge.(Ground floor & 1st floor) |
| 21 | Distempering two coats to wall in all hiehgts with distemper of approved shade on to give and even shade including cost of distemper all labour T&Petc complete in all respect as per the direction of the Engineer-in-charge. |
| 22 | Painting two coats with approved synthetic enamel paints to M.S. window and verendah grill overwahs in sand paper or iron paper received to paints smoothlyincluding cost, conveyance, taxes, cost of all labour as per direction and specification of Engineer in charge |
| 23 | Finishing wall surface two coats of weather coat over a coat of water bound cement primer with cost, conveyance, taxes, royalities, cost of all labour, T&P etc. complete as per direction and specification of Engineer-in-charge. |
| 24 | Supplying fitting and fixing KOTA TILES (SOMANY, KAJARIA, JOHNSON) in floorsof size 600mmx600mmin floor of approved quality over 12mm thickcement mortar(1:1)of approved make conforming to IS 13755 with application of polymer modified quick set cement based water resistant adhesive conforming to IS 15477 of 3mm thick bed and filling joints with white cement of approved quality including cost of all materials labour T&P etc required for the work all complete as per direction of Engineer-in-charge |
| 25 | Supplying fitting and fixing KOTA TILES (SOMANY, KAJARIA, JOHNSON) in floorsof size 600mmx600mmin floor of approved quality over 12mm thickcement mortar(1:3)of approved make conforming to IS 13755 with application of polymer modified quick set cement based water resistant adhesive conforming to IS 15477 of 3mm thick bed and filling joints with white cement of approved quality including cost of all materials labour T&P etc required for the work all complete as per direction of Engineer-in-charge |
| 26 | Supplying, fitting, fixing of Chequred tiles in floor of approved quality over 25mm thickcement mortar(1:1) including cost, conveyances, royalties, taxes of all materials and cost of all labour with T&P, sundries required for the work etc. complete as per specification & direction of Engineer-in-charge |
| 27 | Providing and fixing of Fixed Aluminium Ventilators of approved make to be fabricated from roll formed section made of pre painted steel fixed to the concrete masonary walls by means of self expending screws and glass to be used of 5mm reflective with all taxes etc complete |
| 28 | Supplying fixing and fittings MS door and window shutters with frames, window grills, MS verandha grills and MS grill gate of approved design and drawing made out of MS flat and MS angle at work site with one coat of anticorrosive red oxide zink chrome primer including cutting holes in brick or RCC walls and fixing with CC (1:3:6) including cost conveyance royalty and taxes of all materials all labour T&P required for the work complete (payment will be made on weight basis only).A. DOORS & WINDOWS |
| 29 | EI WORK-Recessed wiring to light point / fan point / exhaust fan point / call bell point with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non-metalic PVC flexible conduit with 5Amp, 250 V modular type switch ISI marked and ceiling rose ISI marked mounted on modular GI box with modular base & cover of suitable size , MS box with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor as arth wire including all accesories and connection as per direction of Engineer in Charge. ( Make of wire- Finolex/ L&T / Anchor / Havels or eq. model ) (Make of switch-Anchor Roma/Legrand arteor/Panasonic Visionor eq. model)Group-A |
| 30 | Group-B |
| 31 | Group-C |
| 32 | Separate Point wiring for 5 / 6 amp modularsocket outlet with 2 x 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked in recess 20 mm dia non-metalic PVC flexible conduit with modular one way type switch ,phenolic laminated sheet suitable size ISI marked MS box and earthing point with 1 x 1.5 sq.mm FR PVCinsulated single core multistrand copper conductor for loop earthing etc. as required. ( Make of wire- Finolex / L&T / Havels/Anchor) (Make of switch-Anchor Roma/Legrand arteor/Panasonic Vision or eq. model) |
| 33 | Supply and fixing of 5Amp modular switch and socket on existing board (Make of switch-Anchor Roma/Legrand arteor/Panasonic Vision or eq. model) |
| 34 | Supplying and fixing of metal box of Modular G.I box for 6 module 18 SWG on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 3 pin 15 / 16 amps modular socket outlet and 15 / 16 amps modulartype switch, connection, painting etc as required.( Make of wire-Anchor/ Finolex / L&T / Havels) (Make of switch-Anchor Roma/Legrand arteor/Panasonic Vision or eq. model) |
| 35 | Recessed wiring to submain in the following sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked conforming to IS-694/1990 in the following mm dia non-metallic heavy duty flexible conduit 1.6 mm thick along with the following sq.mm FR PVC insulatedsingle core multistrand copper conductoras earth wire as required.(Make of wire-Finolex/L&T/Anchor/Havells/V-Guard//HPL or eq model) 2 X 1.5 sq.mm +1 X 1.5 sq.mm in 20 mm dia |
| 36 | 2 X 2.5 sq.mm +1 X 1.5 sq.mm-do- |
| 37 | 2 X 4 sq.mm +1 X 1.5 sq.mm -do- |
| 38 | 4 X 6 sq.mm + 2 X 2.5 sq.mm 32 mm dia |
| 39 | Supply and drawing of following sizes FR PVC insulated single core multistrand copper conductor in existingsurface/recessed/STEEL /PVC conduit as required for Inverter wiring. 1 X 1.5sqmm |
| 40 | Supply and fixing of 15 Amp Top including all acessories and connection for Inverter ( Make : Cona/Anchor/Legrand/Havels) |
| 41 | S/F of A.C point consisting ofstatorwith 1 No 15 Amp Socket Modular type on modular box, base & cover with all connections completein all respect as per direction of Engineer in charge (Cona / Anchor / Havels or eq. model) |
| 42 | Supply and fixing of following way three pole and neutral, sheet steel, MCB distribution 415V on surface/recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, hinged front acrylic cover for the MCB knobs detachable gland plate, interconnections, phosphatized and powder painted including earthing etc. as required (But without MCB/ RCCB/ Isolator) make-HPL/ Havells/ Legrand /L&T/C&S.)4 way (4+12) double door horizontal type |
| 43 | Supply and fixing of 6Amp to 32A rating 240 V/415 V \"C\" series MCB suitable for lighting and other loads of the following poles in the exiting MCB DB ISI marked complete with connections testing and commissioning etc. (Make-L&T/C&S/Havells/Legrand or Eq.)6 to 32 SP MCB |
| 44 | 32A 4P MCB |
| 45 | Supply ,installation, testing and commissioning of main switches (IS 13940 part-3/1993) of following capacity on existing surface / wall mounting and completer with HRC fuse links, interconnections, earthing , etc as required as per direction of Engineer-in-charge. (Make-Seimens/ HPL/ Anchor/ L&T/Havells/C&S/RK)63AmpICTPN main switch |
| 46 | Supplying, installation, of exhaust fan of 300 mm sweep(Make-Havells/almonard/Anchor/Panasonic/Usha or equievalantof exhaust fan in the existing wall, including fixing & conntection as required as per direction of Engg.-in-Charge. |
| 47 | Supplying, installation, testing and commssioning of 1200 mm sweep white/milky colour ceiling fan Make-Equievalant higher model with 5 star ratedof Havells/almonard/Anchor/Panasonic/Ushaor equievalant reputed make & model A catagory ISI marked as approved ) including wiring the down rod of standard length (upto 30 cm) with 1.5 sq mm PVC insulated, copper conductor, single core cable etc. as required as per direction of Engg.-in-Charge |
| 48 | Supply and fixing of modularType fan regulator (Make-Roma/Legrand or Eq.) |
| 49 | Surface/Recess LEDLight fitting (1500 Lumen) of make BAJAJ (CAT No:BPSLR 15W WH PRO RD) / Equivalent of Philips/Havells/Lighting Technologies. |
| 50 | SITC of energy efficient LED tube light fittings with decorative alluminiumbatten and LED tube light having power rating not more than 20 wattcomplete with electronic driver and all other accessories withdiffuser having 5 years warrantyi/c connection etc as requiredas per direction of Engg.-in-Charge. (Similar to Panasonic Model No. PBTM08208 orsimilar modelofHavells/ Philips/ Crompton/Bajaj or equievalant reputed make & model A catagory ISI marked as approved.). |
| 51 | S/F of 90wattLEDstreet Light fitting new generation energy saving and environmental friendly long life versatile pressure die-cast aluminium IP66 roadway luminaire with high power LEDs as light source and electronic drive including withall acccessories and connection. (Make:Philips/Havells/Crompton/Panasonic or Equivalent as per the direction of Engineer-in-charge) |
| 52 | S/F of 2250 VA 12V (LCD) capacity Inverter (Make: Luminous/Microtech) |
| 53 | Supply and installation of 12 volt 150 AH Tall Tubular or eq model battery(Make:Luminous /Microtech/Exide) including all acessories and connection as per direction of Engineer-in-Charge |
| 54 | Supply & fixing of Inverter stand |
| 55 | Supply of 10sqmm 4core Allm. armoured XLPE insulated cables ISI marked.(Make- Glowstar/ Polycab/ Havells/KEI or eq. model) |
| 56 | Laying of one number of PVC insulated and PVC sheathed / XLPE power cable of 1.1KV grade of size not exceeding 25 sq.mm direct in ground including excavation, sand cushing, protective covering and refilling the trench etc. as required. |
| 57 | Supply and making end termination with brass compression gland and aluminium logs for 4 X 10sqmm size of PVC insulated and PVC sheathed / XLPE aluminium cable of 1.1kv grade (without cost of cable ) as required. |
| 58 | S/IT/C Of Earthing with copper earth plate 600 mm x 600mm x 6 mm thick ISI marked including accessories and providing masonary with cover plate having loccking arrangement and watering pipe etc (WITHcharcoal and salt) as required as per direction of Engg.-in-Charge. |
| 59 | Providing and fixing 25mm x 5 mm copper strip on surface or in recess for connections etc. as required as per direction of Engg.-in-Charge. |
| 60 | PH WORK:-Supplying all materials, labour, T&P and providing and fixing to wall or ceiling and floor CPVC pipesconforming to IS:15778 having thermal stability for hot and cold water supply, including all CPVC plain and brassthreaded fittings including fixing the pipe with clamps at 1.00. spacing. This includes Jointing of pipes & fittings with one step CPVC solvent cement and testing of Jointsall complete as per specification and direction of the Engineer in charge.20mm dia CPVC pipe In ground floor |
| 61 | 25mm dia C-PVCPipe |
| 62 | Supplying all materials, labour, T&P and providing and fixing to wall or ceiling and floor pvc pipesconforming to ASTM-D-1785/89 (Sch-80) and pipe fittings of the following nominal bore with clamps including making good the wall, ceilingand floor all complete as per specification and direction of the Engineer in charge 25mm dia PVC ASTM-D ( Sch-80) |
| 63 | 32mm dia PVC ASTM(SCH-80) Pipe |
| 64 | 40mm dia ASTM ( Sch-80 ) PVCPipe |
| 65 | Supplying all materials,labour,T&P and cutting holes through existing brick work including making good the damages in cement mortar(1:4) for taking GI pipes and fittings/PVC pipes and fittings etc.all complete as per PH specification and direction of the Engineer-in-charge.250mm thick wall |
| 66 | Supplying all materials , labour, T&P and cutting holes in RCC floors and roofs upto 19cm thick for passing P.V.C pipes and G.I fittings etc. , and repairing the holes after insertion of pipe etc. with cement concrete (1:2:4) including finishing complete so as to make it leak-proofas per P.H. specification and direction of Engineer-in-chargeIn ground floor |
| 67 | Supplying all materials , labour, T&P and cutting grooves in pucca floors and walls for taking P.V.C pipes and G.I fittings etc. and making good the damagesincluding finishing complete as per P.H. specification and direction of Engineer-in-charge.In ground floor |
| 68 | Supplying all materials , labour, T&P and fitting and fixing brass/CP fittings of following nominal bore with supply of all jointing materialscomplete as per P.H. specification and direction of Engineer-in-charge15mm C.P.Bib cock(Plaza make/Amber /Aquatic make ) |
| 69 | 15mm C.P.Long Body Bib cock (Plaza make/Amber /Aquatic make ) |
| 70 | 15mm dia CP Angle Stop cock.(Plaza make/Amber /Aquatic make ) |
| 71 | 25mm dia brass fullway valve(Shakti Make) |
| 72 | 32mm dia Brass fullway Vave (Shakti make) |
| 73 | 40mm dia brass fullway valve(Shakti Make) |
| 74 | 15mm dia. C.Pextension piece |
| 75 | 15mm dia. C.P flange |
| 76 | 125mm dia CP gratting |
| 77 | 15mm C.P.Pillar cock(Plaza make/Amber /Aquatic make ) |
| 78 | Supplying all materials,labour,T&P and fixing Rotational moulded polyethylene cylindrical vertical water storage tanks including cutting holes through the tank and fixing mild steel tubes and fittings and providing extra sockets and jam nuts, fixing ball valve etc, including hoisting upto a height of 5 metres above ground level and placing the tank to the required position and providing 1st class K.B brickwork in cement mortar (1:6) of 0.46m height in staging and in circular protection wall to support the tank, 12mm thick cement plaster (1:6) over brickwork, R.C.C slab of size 1.60mx1.60m and 0.10m thick, R.C.C beam of 0.25mx0.30m and 3.18m average length in cement concrete(1:2:4) using 12mm size h.g chips including centering and shuttering,watering, curing, conveyance of all materials to worksite etc all complete as per specification and direction of the Engineer in charge2000litre capacity water storage tanks(Sintex make) (1st Floor) |
| 79 | Supplying all materials,labour,T&P and fitting and fixing U-PVC SWR soil waste ventilating pipes and fittings of the following outside diameter conforming to ISI No.13592/1992 to walls with nails,bobbins and wooden plugs or laying in trenches including jointing with supply of approved rubber lubricant by non-heat application method/as per manufacturer\"s specification,testing,earthwork in excavation in all kinds of soil and refilling of trenches as per specification and direction of Engineer-in-charge110mm dia U-PVC SWR Pipe (Supreme/Ashirvad) |
| 80 | 110mm dia U-PVC Plain Tee |
| 81 | 110mm dia U-PVC Door Bend |
| 82 | 110mm dia U-PVC Plain Band |
| 83 | 110mm dia U-PVC Plain Shoe Bend |
| 84 | 110mm dia U-PVC \"P\"Trap |
| 85 | 110mm dia U-PVC Offset without ear |
| 86 | 110mm dia U-PVC Socket plain |
| 87 | Supplying all materials , labour, T&P and cutting holes through existing brickor laterite masonry wall for takingU-PVC / HCI pipes and fittings including making good the damages etc. all complete as per P.H. specification and direction of Engineer-in-charge250mmto 375mmthick wall |
| 88 | Supplying all materials ,labour ,T&P and fixing wash kitchen sinkwith outlet at end and weir overflow including fitting and fixing a pair of cast iron or MS brackets painted white, fixing 50mm/40mm dia CPbrass waste , fixing 50mm/40mm dia PVC waste pipe 910mm long with supply of wooden plugs, screws and cement etc. including cutting holes in walls and making good the damages etc.all complete as perspecification and direction of Engineer-in-charge600x450x250 mm stainless steel kitchen sink (Jayna make) |
| 89 | Supplying all materials ,labour ,T&P andfixing Wash basin with hole for pillar taps with cast iron or MS brackets painted white including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc. fixing pedestralfor wash basin recessed at the back for the reception of pipes and fittings, fixing PVC waste pipe of 32mm nominal diameter for wash basin including brass check nut complete, fixing pillar taps capstan head screw down high pressure lettered \"Hot\" and \"Cold\" with long screws, shanks and back nuts of 15mm dia nominal bore, fixing15mm dia PVC inlet connection pipe and making connection with pillar cocks and supply mains for wash basin , fixing 12mm dia CP brass waste etc.all complete as perspecification and direction of Engineer-in-charge.550mmx400mm size wash hand basin with Porcelain pedestal(Hind ware/Parryware/ Cera Make) |
| 90 | Counter top basin 560x455(Hind ware/Parryware/ Cera Make) |
| 91 | Supplying all materials ,labour ,T&P andfixing Mirror of superior glass mounted on 6mm thick A.C. sheet or ply wood sheet and fixed to wooden plugs with chromium plated brass screws and washers etc.all complete as perspecification and direction of Engineer-in-chargeBig size Mirror1 x 2.40 x 0.90 |
| 92 | Supplying all materials,labour,T&P and fixing standard sized Glass-shelf with C.P brass bracket and guard rail complete fixed to wooden pluges with screw etc.all complete as per specification and direction of Engineer-in-charge.600mmx125mm size glass shelf with C.P guard rail |
| 93 | Supplying all materials ,labour ,T&P andfixing standard sizedCP brass towel rail completewith CPbrass brackets fixed to wooden plugs with chromium plated brass screws etc.all complete as perspecification and direction of Engineer-in-charge25mmx600mm long CP Towel rail |
| 94 | C P TowelRing |
| 95 | Supplying all materials,labour,T&P and providing 12mm thick cement plaster(1:4) on brick work including watering,curing,cost of all materials, conveyance of all materials to worksite,paymentof royalty,all taxes etc.all complete as per PWD specification and direction of the Engineer-in-charge.In ground floor |
| 96 | Supplying all materials, labour, T&P and providing brick work withK.B.bricks having crushing strength not less than 75kg/cm² with dimensional tolerance± 8 percent in cement mortar (1:4) including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge InGround floor (Super structure ) |
| 97 | Supplying all materials, labour, T&P and fixing porcelain glazed tiles in dados skirting on 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigments to match the shades of the tiles including rubbing and polishing complete as per direction of the Engineer in charge . 30cm x 45cm Kajaria / SomanyIn ground floor |
| 98 | Supplying all materials, labour,T&P and providing cement concrete(1:1.5:3) with 12mm size hard broken granite chips for R.C.C works including hoisting, laying, watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge In ground floor |
| 99 | Supplying all materials, labour, T&P and providing rigid and smooth centering and shuttering for R.C.C works including false work and dismantling them after casting including conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge R.C.C floor and roof slabs up to 4.30m heightIn ground floor |
| 100 | Supplying all materials, labour, T&P and providing M.S reinforcement for R.C.C work including cutting, bending, binding, and tying the grills and placing in position including cost of binding wire 18 to 20 gauge, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge In ground floor |
| 101 | Supplying all materials, labour, T&P and fixing granite tiles in dados skirting on 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigments to match the shades of the tiles including rubbing and polishing complete as per direction of the Engineer in charge In ground floorIn Ground floor |
| 102 | Supplying all materials, labour, T&P and providing fitting and fixing (Aqua guard) Pure Chill 120 PSS RO+UV of size 750x570x1350mm height with water storage capacity 80 liters along with 2 nos of faucets 1 for cold water and 1 for normal water including a flow of 1.5 ltr per minute etc all completeas per approved drawing,specification and direction of the Engineer in charge.Aquaguard 120 PSS RO+UV |
| 103 | Supplying all materials,labour,T&P and laying in trenches ( to level or slope ) unplasticized PVC pipe conforming to IS:4985/2000 of the following outside dia for class-3 (0.60mpa) including jointing with supply of approved solvent cement by non-heat application method/ as per manufactures\"s providing and laying in trench cement concrete(1:4:8) with 40 mm size hard granite metal in the Type-C-1 standard bedding surrounding or encasing including concrete for bedding and curing etc all complete as per PH specification and direction of the Engineer-in-charge.110mm dia U-PVC pipe ( Allround concrete ) |
| 104 | Supplying all materials ,labour ,T&P and constructing gully trap chamber ofinside size 250mmx250mmwith 8cm thick RCC precast cover slab in cement concrete (1:2:4) mix using 12mm size crusher broken HG chips, foundation concrete (1:4:8) using 40mm size crusher broken HG metal on bed and around trap, KB brick work in cement mortar (1:6) in foundation and plinthand inside 12mm thick cement plastering (1:3) finished with a floating coat of neat cement including fixing 100mmx100mm size HCI gully trap, 150mmX150mm size CI gratingetc.all complete as per drawing,specification and direction of Engineer-in-charge.In side size 250mmx250mm |
| 105 | Supplying all materials ,labour ,T&P and constructing Inspection Chamber ofinside size 760mmx760mmx460mmwith cement concrete (1:3:6) using 40mm size crusher broken hard black granite metal on bed , KB brick work in cement mortar (1:6) in foundation and plinth, moulding and shaping the channel inside and benching with cement concrete (1:2:4) using 12mm size crusher broken hard black granite chips,12mm thick cement plaster (1:3)with cement punning to inside, cement flush pointing (1:3) to outside, R.C.C cover slab (1:2:4) using 12mm size crusher broken hard black granite chips with R.C.C man hole cover, earth work in excavation in all kinds of soil and refilling the cavity around the chamber including watering,curing,cost of all materials, conveyance of all materials to worksite, payment of royalty,all taxesetc.all complete as perapproved drawing, P.H specification and direction of Engineer-in-chargeInside size : 760mmx760mmx460mm |
| 106 | R.C.P.C.Cover(18\" round man hole cover) |
| 107 | Supplying all materials, labour, T&P & constructing Soak Way Pit of the following size with dry brick walling from bottom upto invert of inlet pipe andKB brick work in cement mortar (1:6) for the remaining height at top, cement concrete (1:4:8) using 40mm size crusher broken hard black granite metal on bed, 12mm thick cement plaster in cement mortar (1:4) inside and outside over masonry brick work, gravel backing in the rear of well steining, RCC cover slab in cement concrete (1:2:4) using 12mm size crusher broken hard black granite chips fitted with iron lifting handles including earth work in open well excavation in all kinds of soil and refilling of cavity around the pit and painting the iron works, watering, curing,cost of all materials,conveyance of all materials to worksite, payment of royalty, all taxes etc. all complete as per approved drawing,PH specification and direction of the Engineer-in- charge.1.40m dia x 2.00m deep inside size Soakway Pit |
AI Tender Summary
Tender Timeline
Jun 13, 2023
11:30 IST
Tender Published
Tender notice published.
CompletedJun 22, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJun 23, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender