Tender For Redevelopment Works In Tholkappia Poonga
Tender Value
Ref. Documents
Estimated cost
Bid Submission
14 Jul 2023
0 days left
EMD
20.66 Lakhs
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
chennai → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Redevelopment Works In Tholkappia Poonga
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 13-Jun-2023 | Tender Notice-1 Bid Documents Change | Technical Bid | 13-Jul-2023 |
| 2 | 28-Jun-2023 | Addendum | Technical Bid | 13-Jul-2023 |
| 3 | 10-Jul-2023 | Reply to the Queries | Technical Bid | 13-Jul-2023 |
| 4 | 13-Jul-2023 | Critical Dates | Date | 14-Jul-2023 |
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling, clearing away and carefully |
| 2 | Dismantling, clearing away and carefully stacking Brick / Stone Masonry in cement mortar walls under 3m Brick / Stone Masonry in cement mortar walls under 3mBrick / Stone Masonry in cement mortar walls under 3m high materials useful for re-use for any thickness of walls |
| 3 | Removal of Cut Stone Slabs/RCC Cover Slabs (for dismantling WC/WB/Tiles, etc) |
| 4 | Removal of Pantile or Mangalore Tiled Roof without Roof Timbers (for dismantling Roof) |
| 5 | Carting away the surplus earth and debris to a lead of 10km.including Loading, unloading and dumping in the Corporation Land as directed during the execution. |
| 6 | Dismantling, clearing away and carefully stacking materials useful for re-use for any thickness of walls Removalof existing grill &gate |
| 7 | Removing Cement Concrete Kerbs Clearing Away And Stacking The Same For Reuse |
| 8 | Removing C.C Slab Clearing Away And Stacking The Same For Reuse |
| 9 | Manual Desilting of Adyar Creek inside Tholkappia Poonga (Phase-I) |
| 10 | Earth work excavation for foundation in all kinds of soils invarying depths including dismantling any masonry or roots met within foundation and shoring with planks and baling water if necessary including clearing and levelling the site etc.,and excluding refilling, complete with an initial lead of 10m and lift of 2m |
| 11 | Supplying stone dust and filling in regular layers of 15cm thick including watering, consolidating etc. complete for foundation, basement, etc.. |
| 12 | Supplying clean Crushed Stone Sand (Commercially called M-Sand) Sand sand and filling in regular layers of 15cm thick each including watering, consolidating etc. complete for foundation, basement, etc. |
| 13 | Providing Quarry Rubbish From Approved Quarry Including Cost And Conveyance of All Materials To Work Site All Labour For Spreading. Watering Compacting Etc. Complete. |
| 14 | Refilling with excavated earth other than sand with an initial head load of 100 mts. and depositing the earth as shown by the departmental officersin layers of not more than 10 cm thick well rammed, watered and consolidated etc. complete complying with standard specification Refilling with excavated earth in regular layers of 15cm thickeach including carefully ramming, watering, consolidating, etc.,complete for foundation and basement. |
| 15 | Providing and Laying Granular sub base (GSB) by provided close graded material confirming to( table 400-1) mixing in a mechanical mix plant at OMC carriage of mixed material to work site spreading in uniform layers with motor grader on prepared surface and compacted with vibratory power roller to achieve the desired dry density to the required grade and cross slope as per drawings all others incidental charges etc.complete as per clause of 401 Morth Specification using Grade III metals for Top layer |
| 16 | Providing and laying, spreading and compacting graded stone aggregates to Wet Mix Macadam 250 mm thick specification including premixing the materials with water at OMC in mechnanical mix plant carriage of mixed material by tipper to site laying in uniform layers with pavers in Sub Base/ Base course on well prepared surface and compacting with vibratory roller to acheive the desired density including cost of material, labour charges, rentals for machinery,fuel and all other incidental charges etc., complete as per clause 406 of MORTH Rev-5 |
| 17 | preparation of Mounds of various size and shape by availlable excavated/ Supplied earth in layers not exceeding 20 cm in depth, breaking clods, watering of each layer, dressing etc., lead upto 50 meter and lift upto 1.5 m complete as per direction of Officer - in - charge |
| 18 | Plain Cement concrete work 1:4:8 (1 cement, 4 Crushed Stone Sand (Commercially called M-Sand) and 8 blue granite broken stone jelly 40mm gauge) including consolidation curing, etc. complete for foundation, etc. upto basement |
| 19 | Supplying and erecting shuttering includingnecessary supports for plane surface infoundation and basement for RCC columnfootings,pintol blocks, plinth beam, staircasesteps, critical steps, critical piers,etc.,using mild steel sheets of size 90x60cm and 10 gaugestiffened with welded mild steel angles ofsize25x25x3mm for boarding laid over silverOak (country wood) joists of size 10x6.5cmspaced at about 90cm centre to centre a ndsupported by casuarina props of 10 to 13cm diaspaced at 75cm centre to centre etc.,complete |
| 20 | Supplying and erecting centering for sides and soffits including supports and structting upto 3m high for plane surfaces such asRCC coloumns,top and bottom slabs of boxing. sill labs,sun shades,etc.,with necessary facia using mild steel sheets ofsize 90x60cm and 10 gauge stiffened with welded mild steel angles of size 25x25x3mm for boarding laid over silverOak (country wood) joists of size 10x6.5cm spaced at about 90cmcentre to centre and supported by casuarina props of 10 to 13cm dia spaced at 75cm centre to centre etc.,complete |
| 21 | Supplying and erecting centering for sides and soffits including supports and shuttering upto 3m high for plane surface such asRCC circular column using mild steel sheets of size 90x60cm,10gauge stiffened with welded mild steel angles of size 25x25x3mmfor boarding laid over silver Oak(country wood) joists of size10x6.5cm spaced at about 90cm centre to centre and supported bycasuarina props of 10 to 13cm dia spaced at 75cm centre to centreetc.,complete |
| 22 | Supplying and erecting centering for sides and soffits including supports and shuttering upto 3m high for plane surface such asside slabs of RCC boxing and similar vertical RCC slab,etc.,withall cross bracings using mild steel sheets of size 90x60cm and 10gauge stiffened with welded mild steel angles of size 25x25x3mm for boarding laid over Oak (country wood) joists of size 10x6.5cm spaced at about 90cm centre to centre and supported by casuarina props of 10 to 13cm dia spaced at 75cm centre to centreetc.,complete |
| 23 | Providing and laying in position ,Standardised Concrete Mix M-30 Grade in accordance with IS :456-2000,using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement content of 400 kg/m3 and m,aximum water cement ration of 0.45, including admixture (Plasticiser/ Superplasticier) in recommended proportions as per IS:9103 to accelerate ,retard setting of concrete,improve workability without impairing strength and durability with about(5.0 cum) 7730 kg of 20 mm machine crushed stone jelly and with about (3.3 cum) 5156 kg of 10-12mm machine crushed stone jelly and withabout (4.79 cum) 7670 kg of sand, nut excluding cost of reinforcement grill and fabricating charges,centering and shuttering and also including laying,vibrating with mechanical vibrators, finishing,curing,etc and providing complying with standard specification and as directed by the departmental officers.The coarse and fine aggregates to be used should comply with the requirements of IS Standrands.(No separate payment will be madeby the Department for the excess usage of materials) |
| 24 | Supplying, fabricating and placing in position Mild steel / Ribbed tor steel for all RCC works as per design given including cost of steel and GI binding wire (18 G) in all floors etc., complete complying with standard specification (contractor has to make his own arrangements for the supply of steel and binding wire) |
| 25 | BORED PILE 500 mm Dia Providing and installing Bored cast-in-situ reinforced cement Concrete pile of specified diametre and length below the pile cap in RMC M30 concrete to carry a safe working load not less than specified, excluding the cost of steel reinforcement but including Bentonite solution machinery charges labour chargres and necessary confirmatory boreholes to ensure the SBC as directed by the departmental officer etc., all complete. (Length of pile for payment shall be measured from bottom pile to the bottom of pile cap). |
| 26 | Providing NDT(ISO 17025:2017)onsite testing services from NABL Accredited Laboratory such as welder qualification test certification,Flourescent penetrant test (PT),Radiography test(RT) using AERB licensed RT lab with RSO &BARC Level 2,Ultrasonic test(UT)equipped with DAC,DGS and composite dry scan(UT Level 2 inspectors)and 100% weld visual inspection services to detect flaws &weld sizes as per relevant standard specification and complete as per directed by departmental officers. For Watch tower |
| 27 | Providing NDT(ISO 17025:2017)onsite testing services from NABL Accredited Laboratory such as welder qualification test certification,Flourescent penetrant test (PT),Radiography test(RT) using AERB licensed RT lab with RSO &BARC Level 2,Ultrasonic test(UT)equipped with DAC,DGS and composite dry scan(UT Level 2 inspectors)and 100% weld visual inspection services to detect flaws &weld sizes as per relevant standard specification and complete as per directed by departmental officers. For Spillway bridge |
| 28 | Providing initial pile load test (including the cost of boring, RCC, Tor Steel, etc. complete) for 1 No.by applying 2.5 times the safe bearing capacity of the pile & loading should be conducted as per Appendix A clause 6.3 of IS-2911 Part IV and routine pile load test 2 Nos.for finished pile and also providing Dynamic Pile load test(DLT) for all piles to evaluate pile load capacity.The methodology& instrument specification for DLT shall be followed as per ASTM D4945& IRC standard recommendations. Location of pile as directed by departmental officials. |
| 29 | Hire Charges for Structural Steel staging support arrangement to support the obligatory span at 7m height level etc., where required and as directed comprising MS cribs,cribs joining clamps (clamping @ 4 sides of each cribs of required size),angles,plates,spindle/Stirrup head by hydraulic jack system,tees flats,rounds,squares,other structural steel sections,pipe sleeves and pipes of various sizes,IS channels,IS beams,square rods,etc.,by approved make including bended required shape,painting exposed faces with two coats antocorrosive paint of approved colour over a coat of red lead primer, etc.complete all as per specifications and drawings incuding conveyance,fabrication & labour charges for structural steel staging support all other incidental charges,laoding,unloading using proper all mechanical means at site.The hire period will be for the entire construction of restoration (Conisidered 4 months) and the removal of hired structural steel items from site in safe manner as directed by department. |
| 30 | Providing two legged scaffolding using 15cm dia casuarinas post of 4 M over all length (3 M Height + 0.5 M Projection + 0.5 M into the Ground) the distance between the two rows being 1.25 M and the spacing of posts being 2.0 M in both the rows with two horizontal posts with 0.5 M.Overlap on either side and braces at 2.0 M center to center including longitudinal and transverse middle braces to step up and providing a platform with country wood planks of 40mm thick and 1.M width, etc. in a complete from using coil and nails.(Rate for an initial height of 3 M and length of 1 M). |
| 31 | Along with Scaffolding charges for every additional height of 2.5 M height over the initial height of 3 M till 12m (for Watch Tower). |
| 32 | Supplying, fabricating, fixing and Erection of structural steel (Grade E350), wherever required and as directed at all lifts in concrete or masonry work comprising of MS angles, plates, tees flats, rounds, squares, pipe sleeves and pipes of various sizes, channels, beams, other structural steel sections \"TATA/SAIL\" or other Approved equivalent make including cutting, welding, bending to shape complete all as per specifications and drawings. Note: The contractor shall submit fabrication drawings for work involved based on construction drawings (that may be issued during construction period) for approval by the Engineer-in-charge. The fabrication work shall start only after approval ofthe fabrication drawings. Any change required in the fabrication drawings shall be carried out at no extra cost. Fabrication shall be done in a perfect professional workmanship manner and as provided in Section 17 of IS 800 -2007. Welding shall be carried out by qualified welders. procedure, selection, test and inspectionshall confirm to provisions in IS 816, IS 818, IS 822, & IS 823. Electrodes forwelding, the Erection / hoisting shall commence only after the approval offabricated parts by the Engineer-in-charge.Fabricated Structural builtup Steel Sections |
| 33 | Hire Charges for Generator 125 KVA(including fuel charges, Billing will be done based on actual working days) |
| 34 | Brick work using best quality II class Ground moulded chamber burnt bricks of size 9\" X 4-3/8\" X 2-3/4\" in cement mortor 1:5 for foundation and basement including curing etc complete complying with standard specification. |
| 35 | Random rubble masonry work in cement mortar1:6 (1 cement and 6 Crushed Stone Sand(Commercially called M-Sand)) including fixing of bond stone wherever necessary includingcuring, etc., complete. |
| 36 | Plastering with cement mortar 1:5 ( 1 cement and 5 P sand)12mm thick including curing, etc., complete |
| 37 | Plastering with cement mortar 1:5(1 cement and 5 Crushed Stone Sand (Commercially called M-Sand)),20mm thick including curing, etc., complete. |
| 38 | Plastering with cement mortar 1:3 (1cement and 3 Crushed Stone Sand (Commercially called M-Sand)) 10mmthick including hacking, curing,etc., complete for ceiling andother exposed RCC surfaces. |
| 39 | Clean removal of cement plaster from walls and racking out joints 20mm deep.etc., complete. |
| 40 | Removing old paints from door and window by scrapping and refitting of shutter |
| 41 | Painting two coats with oil bound distemper of approved quality,make and colour including thorough scrapping,clean removal of dirt,etc.,complete and including necessary plaster of paris,putty wherever required over new plastered surface.( ISI STD ) |
| 42 | Painting the new plastered walls with two coats of Exterior emulsion paint (weather proof ) first class quality and of approved colour over a priming coat including thorough scrapping,clean removal of dirt,etc.,complete and including necessary plaster paris,putty etc., wherever required.as per (ISI STD) (It must provide excellent resistance against the growth of algae and fungi on the walls. And it must offer excellent protection against alkali and UV degradation and the durability period should be 5 years. |
| 43 | Supplying and painting with two Coats Ready Mixed epoxy paint first class quality and of Approved colour over existing painted Metal structuralsurface using brush including necessary Scaffolding, thorough Cleaning, Washing, Clean removal of dirt etc., Complete and necessary plaster or paris putty etc., Where ever required (ISI Std.) |
| 44 | Wall Murals ART Painting |
| 45 | Providing and mixing integral crystalline admixture for water proofing compared with control concrete as per DIN 1048 and resistant to 16 bar hydrostatic pressure. The crystalline admixture shall be capable of self-healing of cracks up to a width of 0.50mm. The work shall be carried out all complete as per specification and the direction of the Engineer-in-charge. The product performance shall carry guaranteefor 10 years against any leakage. treatment to RCC structures like basement raft, retaining walls, reservior, sewage & water treatment plant, tunnels / subway and bridge deck etc. at the time of transportingof concrete into the drum of the ready-mix truck , using integral crystalline admixture @0.80% (minimum) to the weight of cement content per cubic meter of concrete) or higher as recommended by the manufacturer\"s specification in reinforced cement concrete at site of work. The material shall meet the requirements as specified in ACI-212-3R2010 i.e. by reducing permeability of concrete by more than 90%, compared with control concrete as per DIN 1048 and resistant to 16 bar hydrostatic pressure. The crystalline admixture shall be capableof self-healing of cracks up to a width of 0.50mm. The work shall be carried out all complete as per specification and the direction of the Engineer-in-charge. The product performance shall carry guarantee for 10 years against any leakage. SUB HEAD : 22.0 WATER PROOFING 22.22 |
| 46 | Supplying and fixing of M.S.Grills for Windows/ Verandah/ Ventilators Grill of standard rectangular design using 25mmx10mm M.S.Flats for outer frame and 20mmx5mm M.S.Flatsfor inner frame and for inner grill portion. The Vertical grillspacing should be 9.6cm. The centre portion spacing in between twogrills should be 14.5cm. 10 Nos of hold fasts of size 25mmx10mm for fixing the grill for Verandah and 8 Nos of hold fasts of size25mmx10mm for fixing the grill for Windows in the wall including one coat of primer etc. complete., (As per sketch enclosed) and also as directed during execution. |
| 47 | Supply & fixing of MS Roof Truss work with rafter size 100x200x4mm & perlin 75x150x36mm approved quality, labour charges for fixing etc all complete and as directed by the departmental officers |
| 48 | Roofing with galvanised corrugated iron sheets (thicknessof sheet 0.8mm) including \"J\"bolts and nuts with bitumenwashers,etc.,complete (ISI STD). |
| 49 | Manufacturing, Supplying and Fixing of Stainless Steel Hand rails for ramp using 50mm dia 304L Grade Stainless Steel pipe of 1.60mm thick at required locations to a height of 900mm from finished floor level welded to 38mm dia Stainless Steel pipe post of 1.00mm thick as vertical at 900mm centre with 2 Nos. of 25mm dia intermediate honzontal stainless steel pipe of 1,60mm thick in between. The vertical pipe nas to be welded to the 100 x 100 x 6mm MS base plate encased in the base concrete. The rate is inclusiva of the charges for cutting, bending, welding, grinding, polishing, conveyance, electrical charges, etc. complete |
| 50 | Providing and laying first quality of double chargedvitrified tiles of all colours of size 600mmx 600mmx8mmset in cm 1:3, 12mm thick including pointing with whitecement, labour materials, etc(Relevent ISI STD) |
| 51 | Paving the floor with best approved quality fine polished /leather finishedGranite Stone Slabs of size 1200 x 600 of 18 / 20mm thick of Synthetic Grey, Paradise andsimilar varieties with machine cut edges laid over a cement mortar bed of 20mm thick using cement mortar 1:3 (One cement and three sand) fixing the slabs with required cement slurry and laid in true right angles with minimum possible width of joints and pointing the joints with white cement mixed with mathcing colouring pigments etc., The granite stone slabs and other materials to be used shall be got approved by the Executive Engineer concerned before use on work, etc., complete as per standard speicification. |
| 52 | Nosing for granite slab of thickness 18/20mm |
| 53 | Floor finish and dadooing walls in cement mortar with Mosaic Tiles / Glazed Tiles / Clay Tiles / Cuddapah Slabs |
| 54 | Dadooing walls withceramic tiles of size 300mm x450mmx 8mmand above in best approved quality tilesset in Cement Mortar 1:2 (One Cement and Two sand) 10mm thick and pointing the joints with white cement mixed with colouring pigments at the rate of 0.40 Kg. / sq.m. neatly in all floors, curing, etc., complying with standard specificationand as directed by the departmental officers. |
| 55 | Dadooing walls withceramic tiles of size 300mm x450mmx 8mmand above in best approved quality tilesset in Cement Mortar 1:2 (One Cement and Two sand) 10mm thick and pointing the joints with white cement mixed with colouring pigments at the rate of 0.40 Kg. / sq.m. neatly in all floors, curing, etc., complying with standard specification ( Non branded) and as directed by the departmental officers. |
| 56 | Cladding the vertical wall with Jet Black Granite slabs (16mm to 18mm thick) and best quality free from all defects and set in CM 1:2 for 10mm thick.etc., complete as directed by the Engineer - in - charge |
| 57 | Supply and installation ofGRG Core Ceiling (or) Equivalent Brand of Acoustical False Ceiling ofTiles of size 595 x 595 x 15mm having volume density 270 kgss / m3, weight 4kgs / m2 which is suspended by using 0.3mm thick skelet trelis T15 metal grid system. The skelet trelis T15 metal grid system of 600 x 600mm module ncludes skelet WA15 W30 wall angle with unequal flanges of 15 / 19mm, length 3000mm, fixed along the perimeter of walls with the help of nylon sleeves and suitable fasteners at 300mm centers. Then suspend the skelet MT15 W36 MainT with flange width 15mm, height 32mm and length 3600mm, from the soffit slab with help of soffit cleat and wire rod with leveling spring clip at 1200mm centres. Skelet CT15 W12 CrossT with flange width 15mm, height 26mm and length 1200mm is interlocked into the pre-cut slots in the Main T15 at 600mm centers in the perpendicular direction to the Main T15. Finally skelet CT15 W06 CrossT with flange width 15mm, height 26mm and length 600mm are interlocked into the precut slots in the CT15 W12 CrossT in direction parallel to the Main T15 to result in 600 x 600mm module.GRG Core Ceiling of size 595 x 595 x 15mm shall be placed into the grid size of 600 x 600mm. The systems to achieve noise reduction coefficient not less than 0.5 NRC, so as to have an neat appearance as directed by the department offices. The cost includes, cost of material, cost of labour, Scaffolding, transportation, conveyance, etc., complying to standard specication. |
| 58 | Pointing with cement mortar 1:3 to full depth 6mm thick of tiles 23cmx23cmx20mm etc., |
| 59 | Pointing with cement mortar 1:3 (1 cement and3 Crushed Stone Sand (Commercially called M Sand)) to a full depth of tiles, such as marbleslab, pressed tiles, ornamentaltiles,etc.,complete. |
| 60 | Providing And Laying 3 Line Hand Dressed Granite On Top With Machine Cut On All Other Sides (50mm Thick) Granite Slab Over Cement Mortar 1:3 For Platform (Pavement) Flooring Including Cost And Conveyance of Granite From Available Source Including Labour Charges For Fixing The Slab In Position To The Line Level And Gradient Including Pointing With cm.1:3 And All Other Incidental Charges Etc.Complete. |
| 61 | Providing UPVC (Un-Plasticized Polyvinyl Chloride) Door:Providing and fixing casement doors fabricated from Un-Plasticized Polyvinyl Chloride (UPVC) sections. Profiles:The profiles should be three chamber system which provides high insulation properties with outer frame 60mm x 55mm with an outer wall thickness of 2.4mm.The window unit should be designed with all corner joints mitred and fusion welded. Windows should be steel reinforced with 25 x 24 x 25mm steel reinforcement with a thickness of 1mm to have dimensional stability. The sash shold be of 60 x 102mm. The mullion should be of 60 x 74mm. The profiles should have co-extructed seals. Hardware: All the hardware like friction stays,handles should be screwed with self tapping screws. The handless, licks should be designed so that they cannot be released from outside. Glazing:The window system should be glazed with 5 mm plain float glass / 6mm bison lam Installation:The profiles should be cut to length and welded 45 degrees. The window should be designed such that the water drainage does not pass through the reinforcement chamber. The window system should be fixed directly to the |
| 62 | UPVC Window: Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Windows of casement type (open) from the profile the size of outer frame 60mm x 58mm and shutter profile are reinforcement with GI/1mm 125GSM and 100% corrosion free, the profiles are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with over all the edges of frame and shutter the shutter will be provided with Espag multi power point locks and also it operates as handle. The corners and joints should be welded and cleaned. Radiations free pin headed plain or brown colour glass 4mm thick should be provided to the shutter and it should not allow leakage of water even at most ranging storms and should have key lockable action, security protective hinges, strong locking systems and as per size for arresting noise and energy loss. The connecting mechanism between sash and outer frame that enables opening of the window. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The window should be got approved from the Departmental Officer before use on work (PWD _SOR =item no 269) |
| 63 | UPVC Ventilator Specification:Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) louvered Ventilators offrom the profile the size of outer frame60mm x 58mm and shutter profile size of 60x 78mm both profiles are reinforced withGI/1mm 125GSM and 100% corrosion free, the profiles are multi chambered sectionswith wall thick of 2mm. The EPDM rubber(black colour) covered with over all the edges of frame and shutter. The corners and jointsshould be welded and cleaned. Radiationspin headed glass 4mm thick should be provided in the louvers. The window shouldbe fixed to the wall with 100% packing withscrews and silicon packing all round the frames. The ventilator should be gotapproved from the Executive Engineer beforeuse on work |
| 64 | Supply & Fixing of WPC (Wood Plastic Composite) Floor Decking.The system will be installed using aluminum box section(50x25x1.3mm) and Aluminium L angle (38x25x2mm) for Decking workand using with necessary hardware like Screws, PVC plug, SS Starter Clip and PVC decking clip. Including all used materials and labors.(Non Sor) |
| 65 | Supply and fixing of WPC (Wood Plastic Composite) louvered cladding (fluted pannels) of size 2900x218x28mm along with wpc L profile. The system will be installed using aluminium box section [50x25x1.3mm] and aluminium L angle [38x25x2mm] for decting work and using with necessary hardware like screws, pvc plug ss starter clip and pvc decking clip .Includingh all used material and labour (FRONT, BACK, LEFT & RIGHT ) |
| 66 | Supply & Installation of Wood Plastic Composite (WPC) Post of Size 150 x 150 mm MS box section insert 980x80x6mm) coated with hot dip galvanization as per ISO 1461, to be anchored to the floor and celing through a base plate\ wall bracket of size 200mmx200mmx6mm with four numbers of12mm dia bolts fixed with epoxy grout with necessary mechanical expansion anchors with necessary fixtures, including scaffoldind charges all complete complying with relevent standard specifications and as directed by the department officers. |
| 67 | Supply & Fixing of WPC (Wood Plastic Composite) Handrail and Balusters. The system will be installed using 90x90 WPC Vertical post (1m height @ C/C 1.2m), 60x60 WPC horizontal beams (2 runs of 1.2m long @ top & bottom) and 60x40 vertical balusters (0.75m height @ C/C 0.25m) and using with necessary hardware like Screws, PVC Plug and L Cleat. Including all material and labors. |
| 68 | Supply and fixingWPC (wood composite polymer) pergola post with beamsand the system will be installed using MS Square Tube (80x80x2.5mm), (60x60x2.5mm) and (30x30x2mm) along with Yellow/ Redoxide primer for WPC Pergola work and using with necessary hardware like base Plate, screws, L Cleat and anchor fasteners. Including all material and labors. Rafter Gap - 1 feet.(Non SOR) |
| 69 | Providing and Fixing TW Wooden jaali made of battens of size 50x25mm fixed to a TW frame of size 80x60mm with necessary nails, screws, plugs and drilling holes for Rawl plugs, anchor bolts, etc for fixing the jaali onto the RCC/brick columns including priming coat complete as directed by the departmental officers. |
| 70 | Best varnishing wood work, two coats.(ISI STD) |
| 71 | Supplying and laying rubber mould hydraulic pressedPaver block Providing and laying of80mmthick high strength type conforming IS 15658-2006 of rubberized interlocking paver lock in size of minimum compressive strength of 40N/mm2 in uniform shape of approved make to be laid in flurring bone pattern with stone dust cushion below the uniform shape of approvednon skitting surface in the top and the rate including levelling the base preparation ofpavers as sub base, stone dust cushion 30mm thick layingout of pavement cut the pieces to fix the edge vibring the pavers,sweeping tranporting loading unloading of laying paver block as per standard specification,. |
| 72 | I Paver Grey - 80mm thk |
| 73 | I Paver Red - 80mm thk |
| 74 | Tactile Tile - 300x300mmx60 mm thick |
| 75 | Riven -Car parking 6000x600x80 mm |
| 76 | Bike parking drive way- Riven |
| 77 | Bike parking-Riven |
| 78 | Cobble grey 100x100x80 mm |
| 79 | Cobbel red 100x100x80 mm |
| 80 | Riven |
| 81 | Tivoli |
| 82 | Square gray-200x200x65 mm |
| 83 | Grass paver-Arch line (Design) |
| 84 | blue onyx pebble |
| 85 | Supplying And Fixing Rubber Moulded Interlocking Blocks Against Available Edge Restraints 80 mm Thick of Approved Design And Pattern of Strength 40 N/Sq.m. 10 mm Iss Metal With Minimum Cement Content As Applicable To M 40 Grade Concrete As Per Is-456-2000 Manufactures By Mechanical Or Hydraulic Machine Using Vibro- Compaction Process And Laid Over 50 mm Thick Laying Course (Bedding) Crushed Stone Sand (M Sand) Well Compacted By Plate Compactor With A Joint Width of 2 mm To 5 mm Including Filling of All Joints With Crushed Stone Sand (M Sand) And Compacting The Paved Surface With Plate Compactor Two Or Three Times Until All The Unit-To- Unit Joints Are Completely Filled With Crushed Stone Sand (M Sand) And Trimming The Edges Neatly Including All Labour Charges And Plate Compactor Charges Etc. Complete(Cost Inclusive of Crushed Stone Sand (M Sand)). |
| 86 | Supplying And Fixing of Rubber Moulded Grey Premium Concrete Kerb of Size 450X125X300mm Using M30 Concrete. The Concrete Shall Be Moulded By Table Mount Vibrated With Polypropylene Fibers At 5% And Curing Compound. The Rate Shall Include Cost of Materials Transportation Loading Unloading Charges And All Taxes Including Necessary Earth Work Pointing With cm. 1:3 To Full Depth Curing Thread Lining Etc Complete . Kerb 450X125X300MM |
| 87 | Supplying And Fixing of Rubber Moulded Grey Premium Concrete Kerb of Size 450X200X600mm Using M30 Concrete. The Concrete Shall Be Moulded By Table Mount Vibrated With Polypropylene Fibers At 5% And Curing Compound. The Rate Shall Include Cost of Materials Transportation Loading Unloading Charges And All Taxes Including Necessary Earth Work Pointing With cm. 1:3 To Full Depth Curing Thread Lining Etc Complete . Garden Edge 450x200x600mm |
| 88 | Design, Supply, Fabrication and Erection of aluminium channel for mist chamber using Box sections of size 80x50x2mm and other smaller sections as directed by departmental officers. |
| 89 | Sil poly sheet for Mist chamber and Poly tunnel Made of 200 GSM with cross laminated |
| 90 | Brass c.p mist nozzle for to spray liquid of size 6mm/8mm for every (0.45m) |
| 91 | 1/2\"\" Pipe line for liquid flow in mist chamber with working pressure of 15kgsqcm |
| 92 | 1 HP booster pump with automatic pressure discharge up to 135psi |
| 93 | GI rings for poly tunnel |
| 94 | WPC Profile of size 60x60mm with mild steel inserted of size 47x47mm, wpc profile of size60x40mm with 2 numbers of mild steel inserted of size 28x21.5mm, Wpc profile of size 100x50mm with 4mm thick with 2 numbers of mild steel inserted of size 38x25mm, Wpc solidprofile of size 140x 20mm. |
| 95 | supply and fixing of acrylic glass of size 8mm thick |
| 96 | Providing and fixing white glazed higher end branded European watercloset with white pvc seatings white low levelflushing tank with all internal fittings includingjointing the trap with soil pipe witProviding andfixing white glazed Eruopen water closet with rose wood seatings (black) low level flushing tank with all internal fittings including jointingthe trap with soil pipe with cement makingholes in the walls screws etc. complete as directed during execution.(ROCA/Kohler/Equivalent) |
| 97 | Supplying and fixing in position best Indian type water closet 51cm of superior quality and approved make whiteglazed earthernware with \"P\" or \"S\" trap and a pair of porcelin footrest and forming flooring alround water closet using 40mm size broken brick jelly concrete in C.C1:4:10(1 cement, 4 Crushed Stone Sand (Commercially called MSand)and 10 broken brick jelly) and sand filling around thecloset including finishing the surface with C.M.1:3 ( 1 cement and 3 Crushed Stone Sand (Commercially called MSand))20mm thick including making good all the disturbed portions,etc., complete. |
| 98 | Supply and fixing in position of best Indian make white / colour glazed earthernware lipped mouth flat back urinal (touchless sensor based)of best quality and approved make of size 430mm x 260mm x 350mm with GI pipe, 32mm dia bell mouth PVC connection and waste pipe, 15mm dia GI pipe of required length, 15mm dia GM wheel valve, 15mm dia brass nipple 2 Nos., and fixing the urinals in position with necessary TW plugs, clamps, screws, etc., including dismantling masnory and re- doing the same to the original condition, etc., including painting the pipe with two coats of best quality approved synthetic enamel paint over one coat of red oxide primer and checked without any leakage etc. complete complying with standard specifications and as directed by the departmental officers.(The urinal should be got approved by the Executive Engineer before use on works.)Colour glazed earthernwere lipped mouth flat back urinal.(ROCA/Kohler/Equivalent) |
| 99 | Supplying and fixing in position best quality and approved make Indian made white / colour glazed earthernware wash hand basin of size 550 x 400mm (with pedestal / without pedestal) with a pair of cast iron brackets, including cost 15mm dia brass CP pillar tap, 32mm dia \"B\" class GI waste pipe with rubber plug and chain, 15mm dia GM wheel valve, 15mm brass nipple, 15mm dia nylone connection, 32mm dia CP brass waste coupling including fixing of wash basin using CI brackets on to the wall in position with TW plugs and screws, rubber washers, white lead and giving necessary water supply connection and painting the brackets with two coat of painting over a priming coat of anti- corrosive paint including testing for leakages etc., complete complying with standard specification and as directed by the departmental officers. (The wash hand basin and specials should be got approved by the Executive Engineer before use on works)Cost of white glazed earthernware wash hand basin (with pedestal,One pair of cast iron brackets, One No. 15mm dia brass CP pillar tap,One No. 32mm dia \"B\" class GI waste pipe with rubber plug and chain,One No. 15mm dia GM wheel valve, One No. 15mm brass nipple,One No. 15mm dia nylone connection, One No. 32mm dia CP brass waste coupling) |
| 100 | Supplying and fixing best approved best quality Stainles steelHealth Faucetwith Stop coak of size 150 x 150mm including cost of teak wood plugs, brass screws, etc., complete complying with standard specifications.(The soap tray should be got approved by Executive Engineer before use on works).(ROCA/Kohler/Equivalent) |
| 101 | Automaticliquid soap dispenser made of polycorbonate/ acrylonitrile butadiene styrene with 6volt adapter |
| 102 | Battery operated Automatic Fragrance Spray Dispenser with 250 ml capacity made up of acrylonitrile butadiene styrene. |
| 103 | Supplying and fixing of PVC / Fibre Glass Framed 5.5mm thick Mirror, Shelf Type with Hard Board Backing of size 1000x780mm including cost of fittings labour for fixing etc, all complete and as directed by the departmental officers.(SPL Type Mirror) |
| 104 | Supplying and fixing 20mm dia G.I.pipe including cutting,threading and jointing with necessary specials fixing to wall with clamps and screws including making holes in the wall or drilling holes in roof and making good the wall or roof after fixing with necessary scaffolding,etc.,complete. |
| 105 | Supplying and fixing 40mm dia G.I.Pipe including cutting,threading and jointing with necessary specials fixing to wall with clamps and screws including making holes in the wall or drilling holes in roof and making good the wall or roof after fixing with necessary scaffolding etc.,complete. |
| 106 | Supplying, laying and jointing PVC pipes (having working pressure 10 kg. / sq.cm) of approved quality and best variety conforming to BIS of the following dia including cutting, threading and fixing UPVC specials using PVC adhesives (but excluding cost of such specials) and fixing into wall with teak wood plugs, PVC clamps and screws making holes on the wall (or) drilling holes in the roof and making good the dismantled portion to original condition with necessary brick work / cement concrete and plastering neatly wherever necessary with necessary scaffolding charges upto 4 metre height above ground level, etc., complete complying with standard specifications.The PVC pipes shall be got approved by Executive Engineer before use on works. and as directed by dept Office.(EXTERNAL)75 mm Dia |
| 107 | Supplying, laying and jointing PVC pipes (having working pressure 10 kg. / sq.cm) of approved quality and best variety conforming to BIS of the following dia including cutting, threading and fixing UPVC specials using PVC adhesives (but excluding cost of such specials) and fixing into wall with teak wood plugs, PVC clamps and screws making holes on the wall (or) drilling holes in the roof and making good the dismantled portion to original condition with necessary brick work / cement concrete and plastering neatly wherever necessary with necessary scaffolding charges upto 4 metre height above ground level, etc., complete complying with standard specifications.The PVC pipes shall be got approved by Executive Engineer before use on works. and as directed by dept Officers.(PWD SOR Sl.No:394).(EXTERNAL)110 mm Dia |
| 108 | Supplying, laying and jointing PVC pipes (having working pressure 6 kg. / sq.cm) of approved quality and best variety conforming to BIS of the following dia including cutting, threading and fixing UPVC specials using PVC adhesives (but excluding cost of such specials) and fixing into wall with teak wood plugs, PVC clamps and screws making holes on the wall (or) drilling holes in the roof and making good the dismantled portion to original condition with necessary brick work / cement concrete and plastering neatly wherever necessary with necessary scaffolding charges upto 4 metre height above ground level, etc., complete complying with standard specifications.The PVC pipes shall be got approved by Executive Engineer before use on works. and as directed by dept Officers.(PWD SOR Sl.No:394).(EXTERNAL)160 mm Dia |
| 109 | Construction of Inspection chamber of size 60x60x60cm with necessary earth work excavation, 40mm size brick jelly concrete in C.M.1:4:10 ( 1 cement, 4 Crushed Stone Sand (Commercially called M-Sand) and 10 broken brick jelly)stock brick work in c.M.1:y (1 cement and 6 Crushed Stone Sand (Commercially called M-Sand)) for 23cm thick wall, benching, channelling and plastering, interio , exterior and top with c.M.1:3 (1 cement and 3 Crushed Stone Sand (Commercially called M-Sand) Sandsand) 12mm thick and providing 7.5cm thick RCC loose slabcovering in CC 1:2:4 ( 1 Cement,2 Crushed Stone Sand (Commercially called M-Sand) and 4 blue granitebroken stone jelly of 12mm to 20mm size) with necessary reinforcement and arrangements to lift for cleaning purpose,etc.,complete.ides top and bottom including earth work excavation RCC 1:2:4 ( One of cement two of sand and four of 20mm gauge hard broken stone) Including SFRC Cover Heavy duty collor with slab of required size fixing in position curing finishing etc.,completecomplying with relevant standard specification and as directed by the departmental officer. (Inspection 0.60x0.60m (inside opening)). |
| 110 | Supplying and fixing 150mm x 100mm size stone ware Gully trap with iron gratings over a bed of 150mm thick brick jelly concrete in SFRC cover slab of size 300 x 300mm over using 40mm size brick jelly and brick masonry wall 115 mm thick using fly ash bricks of size 23x11x7cm in cm 1:5 (One of cement and five of sand ) plastered with CM 1:3 (One of cement and three of sand) 12mm thick Including fixing cover slab fixing in position curing finishing etc., All completecomplying with relevant standard specification and as directed by the departmental officer. |
| 111 | Supply and fixing 2HP summersible pump set asper isi specification with isi mark hydurallically testing and commisioning of submersible wet type suitable for sump with pressure gauge and necessary length of 2nos of pp from pumpset to the top of the sump and other required accessories etc complete in all respect and as directed by the departmental officers, the motor and the pumpset supplied should satisfied the following duty conditions etc complete complying with standard specification and as directed by the departmental officers. |
| 112 | Supply and fixing of GM Gate Valve 40mm Dia heavy type with necessary flanges, gaskets, nuts and bolts complete as required and shall be compatable with Composite pipes as applicable.etc.,completecomplying with relevant standard specification and as directed by the departmental officer. The quality and brand Gate Valves is to be got approved by the Department officer before fixing. |
| 113 | Supply and fixing of Ball Valve with necessary flanges, gaskets, nuts and bolts complete as required and shall be compatable with Composite pipes as applicable.etc.,completecomplying with relevant standard specification and as directed by the departmental officer. The quality and brand Gate Valves is to be got approved by the Department officer before fixing. |
| 114 | Supplying and fixing ofC.P 2Way Bip cock Long body with wall flange like ESSCO, Jaquar fitiingincluding cost of fittingslabour for fixing etc, all complete and as directed by the departmental officers., (The quality and brand of fittings should be check before use). |
| 115 | Supplying and erecting SINTEX or approved equivalent make HDPE plastic vertical cylindrical 1000 Litre water storage tank, strickly adhering ISI standard as per ISI Mark 12701 (Latest revision) including all taxes and freight charges within Corpn.City Limit. |
| 116 | MODULAR WIRING with 2 x 1.5 sqmm (22 / 0.3) PVC insulated SC unsheathed Cu. Conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories in flush with wall with continuous earth wire connection of 14 SWG TC wire for making good of the concealed portion with suitable colour for PVC concealed light point / Fan point (For electronic regulator).( WIRING FOR MODULAR SWITCHES,MODULAR PLATE, MODULAR PLATED M.S BOX, MODULAR MCB shall be added) (ED-267) |
| 117 | Supplyandrunof2of2.5sq.mm.(36/0.3)PVC insulated SC unsheathedcopper conductor of 1100V grade in rigid pipe concealed in wall and ceiling with continuous earth wire connection of 14 SWG TC wire andmakinggoodofthe concealed portionwith suitable colour and as directed by dept. Officers.. (PWD SD-42) |
| 118 | Supply and run of 2 of 4sqmm (56/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V Grade in suitable open PVC rigid pipe on wall and ceiling with continuous earth wire connection of 14 SWG TC wire with painting of suitable colour. (ED-154) |
| 119 | Supply and laying of 3Cx2.5 Sq.mm Armoured Copper Cables for electrical motor, control panel, pressure switch, jockey motor etc., all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary, etc., complete as per standard specification and as directed by the Departmental Officers. Make: POLYCAB/PARACON/FINOLEX / EQUIVALENT. (PWD SOR 364 (d)) |
| 120 | Supplyandlayingof 4Cx16 sq.mm.PVCLTUG aluminium armoured cable in a trench to be excavated at a depth of 0.75metreputting0.15metrelayerofsandand coveringthecablecompletelywithbricksandsand and refilling the earth to make good etc., complete and as directed by dept. Officers. (SD-203) |
| 121 | Supplyandlayingof 3-1/2x95 sq.mm.PVCLTUG aluminium armoured cable in a trench to be excavated at a depth of 0.75metreputting0.15metrelayerofsandand coveringthecablecompletelywithbricksandsand and refilling the earth to make good etc., complete and as directed by goverment Officers. (SD-208) |
| 122 | Cable Tray (SOR VIII, PART-H, 6a, 6b) GI Hot Dip / Powder Coated 16 SWG Cable Tray with 150mm width and 50mm height (PWD SOR VIII, PART-H, 6a) |
| 123 | Cable Tray (SOR VIII, PART-H, 6a, 6b) GI Hot Dip / Powder Coated 16 SWG Cable Tray with 300mm width and 50mm height (PWD SOR VIII, PART-H, 6b) |
| 124 | SINGLE PHASE DISTRIBUTION BOARD WITH MCBsSUPPLY & FIXING OF 4 way vertical SPMCB sheet steel distribution board flush type / surface type MODULE TYPE WITH IP 42 PROTECTION fitted with bus bars and neutral links with single phase MCB out goings and separate 2 way provision for accommodating one no. of 2 pole incomming MCB Isolator and another separate 2 way provision for accommadating one no. of 2 pole ELCB / RCD with lable holder and provisions for taking up cable for size not less than 35 sq.mm ( NO OF OUT GOING 4WAY)(WITH ACRYLICL DOOR COVER ) (seperateprovision shall be given forMCBs, Isolators, ELCB / RCD ) {M.S Angle Iron of size 1 1/2\" x 1 1/2\" x 1/4\" Mounting} ( THE ABOVE D.B SHALL BE PRE WIRED WITH SUITABLE SIZE PVC COPPER WIRE )(ED-513) |
| 125 | SUPPLY & FIXING OF HORIZONTAL THREE PHASE DISTRIBUTION BOARDMODULE TYPE WITH IP 42 PROTECTION 6 way TPMCB sheet steel distribution board flush type / surface type fitted with bus bars and neutral links with single / three phase MCB out goings and separate 4 way provision for accommodating one no. of 4 pole incomming MCB Isolator and another separate 4 way provision for accommadating one no. of 4 pole ELCB / RCD with lable holder and provisions for taking up cable for size not less than 35 sq.mm (WITH METAL DOOR COVER) No. of ways out going18way (seperateprovision shall be given forMCBs, Isolators, ELCB / RCD ) {M.S Angle Iron of size 1 1/2\" x 1 1/2\" x 1/4\" Mounting} ( THE ABOVE D.B SHALL BE PRE WIRED WITH SUITABLE SIZE PVC COPPER WIRE ) (ED-489) |
| 126 | Single Pole 6A to 32A, 10KA (ED-451) |
| 127 | Triple Pole & Neutral 63A, 10KA (ED-458) |
| 128 | 40 Amps 30 MA DP (ED-465) |
| 129 | Modular Switch Board |
| 130 | S5 / 6 amp Modular switch Single way |
| 131 | 5 / 6 amp Modular 5 pin socket |
| 132 | 15 / 16 amp Modular switch Single way |
| 133 | 15 / 16 amp Modular 5 pin socket |
| 134 | 20 Amps AC Socket & Switch |
| 135 | 2 module Plated / G.I Box concealed Type (ED-289) |
| 136 | 4 module Plated / G.I Box concealed Type (ED-289) |
| 137 | 8 module Plated / G.I Box concealed Type (ED-289) |
| 138 | 12 module Plated / G.I Box concealed Type (ED-290) |
| 139 | 16 module Plated / G.I Box concealed Type (ED-291) |
| 140 | 18 module Plated / G.I Box concealed Type (ED-292) |
| 141 | Modular plate for the above 2 modular box (concealed) |
| 142 | Modular plate for the above 4 modular box (concealed) |
| 143 | Modular plate for the above 8 modular box (concealed) |
| 144 | Modular plate for the above 12 modular box (concealed) |
| 145 | Modular plate for the above 16 modular box (concealed) |
| 146 | Modular plate for the above 18 modular box (concealed) |
| 147 | Earthing as per the ISI specification with an earth electrode of 2.1mt class \"B\" GI pipe of dia not less than 40mm, with copper earth plate of size 125mm x 50mm x 6mm, with necessary funneling arrangements with necessary masonry work and with 38mm RCC cover slab for the brick masonry. (SD-233) |
| 148 | Supply and run of 1 of No.8 SWG GI wire 1 of No.8 SWG GI wire for earth connection. (SD-74) |
| 149 | Supplyandrunof25mmx3mmtinnedcopperflat withnecessaryclamps/supportsonwall/floor/ ground for earth connection (SD-76) |
| 150 | Panel Board - Supplying, Erecting, connecting & commissioning of a madeupofsheetsteel,dustandverminproofof Cubicle type, Indoor type, floor mounting, free standing,Compartmentalizeddesignandfabricated with14CRCAsheetsteelformainframes,and16 CRCA sheet steel Doors & partitions and removable of Glandplates.ThePanelBoardshallbeincorporated with the following:- Incomer125 AmpsTPNMCCBof25kA(Ics) withstanding capacitywith FOD, Adjustable Overload, Fixed Short Circuit Relays - 1 Set Outgoing 63 AmpsTPNMCCBof25kA(Ics) withstanding capacitywith FOD, Adjustable Overload, Fixed Short - 10 Nos. Panel Board (Non-SOR) |
| 151 | Supply and Fixing of 18W LED 3000K Square Type Recessed Fitting with LED (ED-530) |
| 152 | Supply & Fixing of 48\" sweep size CEILING FAN of 5 Star Rated with double ball bearing , down rod, canopy complete set (with out speed regulator) ( INCLUDIN SUPPLY & FIXING OF FAN CLAMP WITH SIDE PLATE AND 45 cm. ( 18\" ) CROSS ARM WITH 700 MM DOWN PIPE ) (ED-172) |
| 153 | Supply and Fixing of LED Garden bollard light fitting of 20W (600mm tall) made of hot galvanized steel pole powder coated with grey matte finish (60.3 MM OD X 3.65mm THICK) with post top contemporary ccylindrical luminaire of size 200mm(h)x60mm(dia) and other necessary components, cost including civil work for foundation. (Non-SOR) |
| 154 | Supply and Fixing of LED Garden Post light fitting of 48W-60W along with Cost of Erection & materials required for 3 mtr tall hot galvanized steel pole powder coated with grey matte finish (60.3 MM OD X 3.65mm THICK) with post top contemporary conical luminaire of size 600mm(h)x600mm(dia) made of cast Aluminm (UNI EN 1706), hot galvanized steel sheet, phosphor treated transparent flat glass and SS fastners along with 4-core SMC Fuse box (IP65 waterproof rated) and other necessary components, cost including civil work for foundation. (Non-SOR) |
| 155 | Supply and Fixing of LED Warm White flexible strip light fitting (5m module) ofIP65 water proof rated with other necessary components suitable for wrapping around the Aluminium dye cast texts of the name board. (Non-SOR) |
| 156 | Supply and Fixing of LEDceiling mounted IP50 (dust proof) light fitting (Square Type) of18W with other necessary components as directed by departmental officers. (Non-SOR) |
| 157 | Supply and Fixing of LEDwall light (Up-Down 2 Ray/way) with IP65 waterproof outdoor grade enclosure made of Aluminium casing powder coated with black matte finish of 10W and other necessary components as directed by departmental officers. (Non-SOR) |
| 158 | Supply and Fixing of LEDwall light (Up-Down 4 Ray/way) with IP65 waterproof outdoor grade enclosure made of Aluminium casing powder coated with black matte finish of 10W and other necessary components as directed by departmental officers. (Non-SOR) |
| 159 | Supply & Fixing of 50W RGB Lens LED Brick Light (IP65 Waterproof grade) of Multi-Colour with Remoteand other necessary components as directed by departmental officers. (Non-SOR) |
| 160 | Supply & Fixing of 50W Warm White/Yellow Lens LED Brick Light (IP65 Waterproof grade)and other necessary components as directed by departmental officers. (Non-SOR) |
| 161 | Supply & Supply & installation of Split type 1.5 TON Air conditioner ( 3 Star rating ) (ED-258) |
| 162 | Supply & Supply & installation of Split type 2.0 TON Air conditioner ( 3 Star rating ) (ED-260) |
| 163 | Supply & Fixing of Brass cable gland for 4C x 16 sq.mm LT, UG Armoured Cable with earth connection. (SD-183) |
| 164 | Supply and providing cable end termination of 4 x 16 sq.mm. PVC LTUG aluminium armoured cable with necessary aluminium cable sockets by crimping etc with electrical connection complete. (SD-235) |
| 165 | Supply and fixing of brass cable gland for 3-1/2 x 95 sq.mm. PVC LTUG aluminium armoured cable with earth connection. (SD-190) |
| 166 | Supply and providing cable end termination of 3-1/2 x95 sq.mm. PVC LTUG aluminium armoured cable with necessary aluminium cable sockets by crimping etc with electrical connection complete. (SD-239) |
| 167 | Supply and laying ofthe following size RCC hume pipes with collar.The cost including excavation to a depth of 750mm to 1000mm from existing ground level, plasterings, back filling, ramping the soil, makingthe surface to match the original surface as required.300 mm dia |
| 168 | Supply and laying ofthe following size HDPE pipe for cable run-off.The cost including excavation to a depth of 750mm to 1000mm from existing ground level, plasterings, back filling, ramping the soil, makingthe surface to match the original surface as required. 100 mm Dia HDPE Pipe with accessories |
| 169 | Nursery Equipments |
| 170 | supply of2in1 battery operated sprayer unit (16L capacity) 12v and 8A as directed by departmental officers |
| 171 | Supply of portable sprinkler system consisting of 360 degree rotating spray nozzle of width 14cm and overall height of 26.5cm, with sharp ground insert provision (3 nozzle unit ) with 1/2\"\" dia irrigation hose(pvc braided) pipe of length 15m |
| 172 | supplyRegular pruning secateurs of size 26x7.6x25cm |
| 173 | supply of grafting/budding knives made of stainless steel with plastic handle |
| 174 | supply of stainless steel spade of size 12\"\"x11\"\" |
| 175 | supply of rakes made of mild steel (14 teeth with 48\"\" handle) |
| 176 | supply of stainless steel hand hoes with 4ft metal handle with black and red colour |
| 177 | supply of plant pot trolleys made of mild steel. it consist of 4 racks with 32 buckets. |
| 178 | supply of work bench made of mild steel of rectangular size (5\"x3\"x2.5\" feet) top covered with high resistance sheet. |
| 179 | supply of double hand wheel barrow for garden purpose with dimension of18\"\"x30\"\"x20\"\"(inc) with weight of 150kg |
| 180 | supply of tags, hand lable machines |
| 181 | supply of pruning saw made of carbon steel material and handle made of ABS plastic and its size of 240mm |
| 182 | supply of pruning knife made of stainless steel and finely polished blade |
| 183 | Vegetation Works |
| 184 | TREES (2mts) C/C Pits of size 600mm x 600mm x 600mm filled with 50% existing mother earth and balance 50% filled with a mixture of Red soil and manure. The rate includes labour charges for pitting, filling, supply and planting of healthy plants as per planting drawing. The trees should be stacking to protect the trees from wind. The rate does not include supply of soil, manure and maintenance 7\" TO 8\" Height] |
| 185 | Albizia procera |
| 186 | Alstonia scholaris |
| 187 | Erythrina variegata |
| 188 | Ficus religiosa |
| 189 | Lagerstroemia lanceolata |
| 190 | Syzygium cumini |
| 191 | Tectona grandis |
| 192 | Terminalia bellirica |
| 193 | Terminalia catappa |
| 194 | Vitex altissima |
| 195 | Bambosa Vulgaris |
| 196 | Bambosa wamin |
| 197 | Avicennia marina\"s |
| 198 | Excoecaria agallocha. |
| 199 | Thespesia populnea |
| 200 | Ziziphus mauritiana |
| 201 | Spathodea companulate |
| 202 | Annona reticulata |
| 203 | Aimona squamosa |
| 204 | Ficus benghalensis |
| 205 | Millingtonia hortensis |
| 206 | Mimusops elengi |
| 207 | Phyllanthus emblica |
| 208 | Pierocarpus mersupion |
| 209 | Swietenia mahagoni |
| 210 | SPL PLANTS (2 mts) C/C |
| 211 | SPL PLANTS (2 mts) C/CSPL PLANTS: Pits of size 450mm x 450mm x 450mm filled with 50% existing mother earth and balance 50% filled with a mixture of Red soil and manure. The rate includes labour charges for pitting, filling, supply and planting of healthy plants as per planting drawing The rate does not include supply of soil, manure and maintenance |
| 212 | Alangium salvifolium |
| 213 | Bauhinia purpurea |
| 214 | Bauhinia variegato |
| 215 | Nyctanthes ar bor-tristis |
| 216 | Pithecellobaum dulce |
| 217 | cassin glauca |
| 218 | Hibiscus tiltaceus |
| 219 | Gmelina arborea |
| 220 | SHRUBS (2 mts) C/C |
| 221 | SHRUBS (2 mts) C/CSHRUBS: Pits of size 300mm x 300mm x 300mm filled with 50% existing mother earth and balance 50% filled with a mixture of Red soil and manure. The rate includes labour charges for pitting, filling, supply and planting of healthy plants as per planting drawing. The rate does not include supply of soil, manure and maintenance which is seperately quoted. [1\"-0\" to 2\"-0\" Height |
| 222 | Carissa carandas |
| 223 | Lagerstroemia parviflora |
| 224 | Cymbopogon nardus |
| 225 | Avicennia rhizophora |
| 226 | Brugeria sexangala |
| 227 | Cymbopogon nardus |
| 228 | GROUND COVER |
| 229 | Apluda mutica L |
| 230 | Aristida adscensionis L |
| 231 | Aristida selacea Retz. |
| 232 | Bothriochloa pertusa (L.) A. Camis |
| 233 | Brachiaria remota (Retz) Haines |
| 234 | Chloris barbata Sve |
| 235 | Cymbopogon coloratus (Hook. f) Stopf Cynodon barberi Rang & Tad |
| 236 | Cynodon dactylon (L) Pers. |
| 237 | Cyrtococcum oxyphyllum (Steud.) Stapf |
| 238 | Echinochloa colona (L) Link |
| 239 | SEDGES |
| 240 | Cyperus CompressusL.. |
| 241 | Cyperus difformis L.. |
| 242 | Cyperus distans L.. |
| 243 | CREEPERS |
| 244 | Planting of Vernonia foliage creeper variety in polythene bag of dia 20 cm including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the site in-charge. |
| 245 | Planting of Ficus pumila (wall sticker/ creeper)foliage creeper variety in polythene bag of dia 20 cmincluding loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the site in-charge |
| 246 | Supply and laying of Shade grass in dibbling method |
| 247 | Design,Supply and Fixing of miniaturescaled models (1:50) of poonga components such as Entrance arch, visitors centre, ticketing centre,education centre nursery buildings,exhibition area,view decks ,watch tower amphitheatre ,bridges,toilets etc., made of Alumnium sheets (3mm thick) finishedwith approved gloss duco paint along with necessary fixing arrangements and construction of pedastal for mounting. |
| 248 | Providing and fixing of Aluminium Dye cast letters of approved size with provision for concealed strip light feature on the sides (all around)and colourThe colour treatment process is achieved with MRF colour coat and then the processed coloured layer is set into the kiln for the heat treatment process for in the following sizeand as directed by dept. officers.(cost excluding strip light) |
| 249 | Tamil Letters - Aluminium Dye Cast letters 30\" (h) x 4\"(depth) |
| 250 | English Letters - Aluminium Dye Cast letters 30\" (h)x 4\"(depth) |
| 251 | English Letters - Aluminium Dye Cast letters 12\"(h)x 4\"(d)Size |
| 252 | English Letters - Aluminium Dye Cast letters 36\" (h)x 4\"(d)Size |
| 253 | English Letters - Aluminium Dye Cast letters 15\"(h)x 4\"(d)Size |
| 254 | English Letters - Aluminium Dye Cast letters 24\" (h)x 4\"(d)Size |
| 255 | Heart Logo - 36\" |
| 256 | Coffee cup Logo - 36\" |
| 257 | Tamil Letters - Aluminium Dye Cast letters 36\"(h)x 4\"(d)Size |
| 258 | Tamil Letters - Aluminium Dye Cast letters 15\"(h)x 4\"(d) Size |
| 259 | Tamil Letters - Aluminium Dye Cast letters 24\" (h)x 4\"(d)Size |
| 260 | Circular Logo Logo 2\" (dia)x 6\"(depth) |
| 261 | PoongaLogo - 12\" |
| 262 | Chairs(water proof & washable cushion upholstery) dark brown (24\"*24\"*36\") pvc cane type |
| 263 | Photo frames - 600x1200mm |
| 264 | Supply & installation of Dual band Wifi routerconnection with simultaneous Dual Band 2.4 GHz&5 GHz with 5 nos of 10/100 Mbps fast Ethernet ports(1WAN &4 LAN )with autosensing technology having 1 no of USB2.0 port &flash memory of 128MB &128 MB RAM,processor with speed 800 GHz(3 years warranty) along with necessary CAT6 patch corts. |
| 265 | Design, Supply , fabrication & fixing of Aluminium Frame work for \"I love tholkappia poonga\" - Selfie spot on brickpedestal(excluding the cost of brick pedestal) |
| 266 | Design, Supply , fabrication & fixing of Aluminium Frame work for \"Foundation Stone poem\" - Selfie spot on pcc pedestal |
| 267 | Supply and fixing ofstainless steel (T316) trellis system 40m (L) 1/8\" (dia) wire rope cable for climbers including SS hubs (56nos), screws ,anchors for fixing on RCC columns and neceesary components as directed by Departmental Officers.(each column will have 8 columns and 7 rows of hubs spread across 360 deg for 3mts height) |
| 268 | Repair and Repainting of the existing Statue of lizard in front of ticketing centre with necessary approved colour paints of exterior emulsion and artist works of ferro cement/restoring the RCC works in the statue as directed by the departmental officers. |
| 269 | Supply ofPVC Cane outdoor dining furniture set with one no oftable(circular table of diameter 900mm)with four nos. of chairs (ciruclar chairs of diameter 600m) with relevent standard specifications and as directed by the department officers. |
| 270 | Supply of outdoor 360 degree rotating patio Umbrella (9ft diameter) of white colour waterproof fabric (230 GSM)along with MS pole (8 ft tall) and floor stand (total weight 100 kg) with relevent standard specifications and as directed by the department officers. |
| 271 | Supplying and fixing of Bus shelter of size 9.00M x 2.50M with 3.0 Nos of vertical supports ( 2.70 m height ) madeout of stainless steel box section of grade 316 and size of 250mm X 250 MMwith suitable trusses, and stiffening plates with seating arrangements etc., |
AI Tender Summary
Tender Timeline
Jul 13, 2023
11:30 IST
Tender Published
Tender notice published.
Completed
Jul 13, 2023
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Completed
Jul 13, 2023
18:00 IST
Corrigendum-2 Issued
Clarifications on tender conditions and amendments issued.
Completed
Jul 13, 2023
18:00 IST
Corrigendum-3 Issued
Clarifications on tender conditions and amendments issued.
Completed
Jul 14, 2023
18:00 IST
Corrigendum-4 Issued
Clarifications on tender conditions and amendments issued.
CompletedJul 14, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJul 14, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender