Rural Development Government Departments Closing in 0 days TDR #38138362

Tender For Construction Of Mini Anganwadi No. 1 Building At Mahandol Tq. Chakur For The Year 2022-23

Issued by Government Departments · chakur, Maharashtra
Tender Value
11.09 Lakhs
Estimated cost
Bid Submission
19 Jun 2023
0 days left
EMD
11094
Bank guarantee accepted
Document Fee
590
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
chakur → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Tender For Construction Of Mini Anganwadi No. 1 Building At Mahandol Tq. Chakur For The Year 2022-23

BOQ

Name of Work: Constg. Mini Anganwadi No. 1 Building at Mahandol Tq. Chakur For the Year 2022-23
Sl. No. Item Description
1Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removingthe excavatedmaterialuptoadistanceof50m.beyondthebuildingareaand stackingandspreadingas directed,dewatering,preparingthebedforthefoundationand necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 3.00 m.) By Manual Means Bd.A.1 Page Number 259
2Excavationforfoundationinhardmurum includingremovingtheexcavatedmaterialupto distanceof 50metresbeyondthebuildingareaandstackingandspreadingasdirected, dewatering,preparingthe bedforthefoundationandnecessarybackfilling,ramming, watering including shoring and strutting etc. complete. (Lift upto 1.50 m) By Manual Means
3Providing and laying Cast in situ/Ready Mix cement concrete in M-10 of trap/ granite/quartzite/ gneiss metal for foundation and bedding including bailing out water, Steelcentering,formwork, laying/pumping, compacting, roughening them if special finish is to be provided,finishingifrequiredand curingcomplete,withfullyautomaticmicroprocessor based PLC with SCADA enabled reversible Drum Typemixer/concreteBatchmixplant(Panmixer)etc.complete. Withfineaggregate(CrushedsandVSI Grade) Bd. E. 1 Page Number 287
4Providing and laying in situ /Ready Mixcement concreteM-20of trap / granite /quartzite/ gneiss metalfor R.C.C.work infoundationslikeraft,stripfoundations,grillageand footingsofR.C.C.columnsand steel stanchionsetc. including bailing out water,Steelcentering formwork, laying/pumping cover blocks, compaction and curingrougheningthesurfaceifspecialfinishistobeprovided(Excluding reinforcementandstructuralsteel)etc.complete,withfullyautomaticmicroprocessorbasedPLCwith SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) Bd.F.3 Page Number 298 and B.7, Page Number38
5ProvidingandlayingCastinsitu/ReadyMixcementconcreteM-20oftrap/granite/quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawing or as directed including steel centering,formwork,coverblocks,laying/pumping,compactionfinishing the formedsurfaceswithcement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete.(Excluding reinforcement and structural steel).with fullyautomaticmicroprocessorbasedPLCwithSCADAenabledreversibleDrumTypemixer/concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) Bd.F.5 Page Number 300 and B.7, Page.Number 38
6ProvidingandlayingCastinsitu/ReadyMixcementconcreteM-20 oftrap / granite/quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or asdirected including steel centering, formwork, cover blocks, laying/pumping, compactionand roughening thesurfaceifspecialfinishistobeprovidedand curingetc. complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushedsand VSI Grade) Bd.F.6 Page Number 300 and B.7, Page Number38
7ProvidingandlayingCastinsitu/ReadyMixcementconcreteM-20oftrap/granite/ quartzite/ gneiss metalforR.C.C. slabsand landings as perdetailed designsand drawingsincludingsteelcentering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic microprocessorbasedPLCwithSCADAenabledreversibleDrum Typemixer/concreteBatchmixplant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) Bd.F.8 Page Number 302 and B.7, Page Number38
8Providing and laying Cast in situ/Ready Mixcement concrete M-20 of trap/ granite/ quartzite/ gneiss metal for R.C.C.chajjaasperdetaileddesignanddrawingsincludingsteelcentering,formwork,coverblocks, laying/pumping,compactingand rougheningthesurfaceif specialfinishistobeprovidedandcuring complete. (Excluding reinforcement and structural steel). withfullyautomaticmicroprocessorbasedPLC with SCADAenabled reversible DrumType mixer/ concrete Batch mix plant (Pan mixer) etc. complete.Withfineaggregate (Crushed sand VSI Grade) Bd.F.9 Page Number 303 and B.7, Page Number38
9Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels,chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings andschedules.including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. Bd.F.17, Page Number 306
10Providing secondclassBurntBrickmasonrywithconventional/I.S.typebricksincement mortar 1:6 infoundationsandplinthofinnerwalls/inplinthexternalwallsincludingbailingoutwatermanually, striking joints on unexposedfaces, raking out joints on exposedfaces and watering etc. Complete. Bd.G. 1 Page Number 313
11Fillinginplinthandfloorswithcontractors material/broughtfromoutsideandapprovedbyEngineer incharge inlayersof15cm to20cmincludingwateringandcompactionetc.complete. Bd.A.11 Page Number 263
12Providing secondclassBurntBrickmasonrywithconventional/I.S.typebricksincement mortar1:6 insuperstructureincludingstrikingjoints,rakingoutjoints,wateringand scaffolding etc. Complete Bd.G.5 Page Number 315
13Providing secondclassBurntBrickmasonrywithconventional/I.S.typebricksincement mortar 1:4 in half brick thick wall including mild steel longitudinal reinforcement of 2 bars of 6 mm diameter / 2 hoop ironstrips25mm X1.6mm placed ateverythirdcourse,properlybentandbondedatendsscaffolding, racking out joints and watering etc. complete. Bd.G.7 Page Number 316
14Providinginternalcementplaster12mm thickinsinglecoatincementmortar1:5without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc. complete.
15Providing internal cement plaster 20mm thick inSingle coats in cement mortar 1:5withoutneeru finish, to concrete, brick surface, in all positions including scaffolding and curing etc. complete Bd.L.4 Page Number 368
16Providing and laying vitrified mirror / glossy finish tiles decorative typehaving size 590 mm to 605 mm x 590 mm to 605 mm of 8 to 10 mm thickness andconfirming to IS. 15622-2006( groupBla) of approved make, shade and pattern for flooring in required position laid on a bed of1:4cementmortarincludingneat cementfloat,fillingjoints,curingandclearing etc. complete.
17Providing and laying vitrified mirror / glossy finish tiles having size 590 mm to 605 mm x 590 mm to 605 mm of 8 to 10 mm thickness and confirming to IS. 15622-2006 ( group Bla) of approved make, shade and patternfordadoandskirting inrequiredpositionfixedin1:4cementmortarincludingneatcementfloat, filling joints, curing and clearingetc. complete Bd.M. 12 Page Number385
18Providing and laying matt finish ceramic tiles of having size 30 cm x 30 cm confirming to I.S.15622/2006 (groupDII-A)and7to8mm thickforflooring inrequiredpositionlaidonabedof1:4cementmortar including cement float, filling joint with white/colour cement slurry cleaning curing etc. complete. Bd.M.12 Page Number 385.
19Providingandlayingceramictilesof havingsize30cm.x30cm.andconfirmingto corresponding I.S. for dado and skirting in required position with readymade adhesive mortar of approved quality on plaster of 1:2 cement mortar including joint filling with white/ colour cement slurry cleaning curing etc. complete. Bd.M.13 Page Number 386.
20Providing andapplying Twocoats ofwall care Putty onplastered surface andCeiling and Walls to prepare surface even and smooth of approved make, etc complete. As directed by Engineer in charge.
21Providing andfixing frame with/without ventilatorof size as specifiedwithCountrynon teak wood for doors and windows including chamfering, rounding, rebating, iron holdfast of size 300mm x 40mm x 5mm with oil painting, etc. complete. As directed by Engineer in charge.
22Providing and fixing solid core flush door shutter in single leaf 32 mm thick decorative type of exterior grade as per detailed drawings approved face veneers 3 mm thick on both faces or as directed, all necessary beads, mouldingsandlipping,wroughtironholdfasts,chromiumplated fixtures and fastenings, with brass mortiselock,chromiumplatedhandlesonboth sides, and finishing with French Polish etc. complete.
23Providing and fixing steel window C.R.C. sheet as per I.S. 1513 : 1986. gauge sect. 65 x 40 x 25 mm shutter single sheet of 24 gauge single leaf joinedby fusion welding at appropriate points with vertical grooves of 15 mm wide and 15 mm deep at a distance of 45 mm. The first andlastribshouldbe60mmawayfrom verticaledgeoftheshutter.theshuttershallbe welded, with angle to from the periphery of the shutter. At the center of the frame there shall beangleweldedtobifurcatetheframeintosegmentswithtwoleaf shuttersquare12mm square guard bars at 120 mm center with all accessories As directed by Engineer in charge.
24Providingandfixingsteelventilatorfullyglazedpartlyfixedasperdetaileddrawingwithhotdip zinc coatingincludingfabricatingglazingwith plain /obscured glasspans 5mmthickandapprovedtype quality and iron oxidized fixtures and fastening with guard square bars 12 mm 10 cm c/c and oil painting 2 coats etc. complete. BD-T-53Page Number 509 As directed by Engineer in charge.
25Providing and applying priming coat on concrete/ masonary/ Asbestos Cement plasteredsurfaces includingscaffoldingifnecessary,preparingthesurfacebythoroughlycleaningoil,grease,dirtandother foreign matter and sand papering as required etc. complete. As directed by Engineer in charge.
26Providingandapplyingwashableoil-bounddistemperofapproved colourand shadetooldand new surfaces in two coats including scaffolding, preparing the surfaces. (excluding the primer coat.) etc. complete. Bd.P.5 Page Number 413
27Providingandapplyingtwocoatsofwaterproofcementpaintofapprovedmanufactureandof approved colourtotheplasteredsurfacesincludingscaffoldingifnecessary,cleaningandpreparingthesurface, watering for two days etc.complete. Bd.0.8 Page Number 406
28Providing and applying two coats of lead/zinc base oil paint/ bituminious paint of approved colourtonew structural steel work and iron work in buildings including scaffolding ifnecessary,cleaningand preparing the surface etc.complete. (excluding primer coat). Bd.0.3 Page Number 403
29ProvidingandfixingOrissatypewhiteglazedearthenware575mmwaterclosetpan including S trap withearthenware footrests,castironsoilandventpipe uptooutside face ofthe wall 1:2:4brick batlime concrete bedding without flushing tank and its accessories etc. complete. As directed by Engineer in charge.
30Providing and fixing 100 mm dia stabiliser pipe/ P.V.C. soil vent/waste pipe and withnecessary fixtures andfitting such as bends, tees, single junctions, slotted vent, clamps etc.complete. As directed by Engineer in charge.
31ProvidingandfixingwhiteglazedearthenwareWashHandBasinof55cm.x40cm.size including coldwaterpillartap/coldandhotwaterpillartapbrackets,rubberplugsandbrasschain,stoptapand necessary pipe connections including P.V.C. waste pipe and trap up to the outside face of the wall. Making good the damaged surface, testing etc. complete. Bd.V.30 Page Number 565
32Providing and fixing H.D.P container one piece moulded water tank made out of high density polythyler and builtcorrugatedinclusiveofdeliveryuptodestinationhoistingand fixing of accessories such as inlet,outletoverflowpipeinclusiveofalltankscapacity between 200 to 1000 liters As directed by engineer-in- charge.
33Providing andfixing onwalls/ceiling/floor 20mm dia. UPVC pipe withnecessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. BD.V 5 page 551 and as directed by Engineer in charge
34Providingandfixing15mm dia.screwdownbib/stoptapofbrassincluding necessarysocketunionnut complete.
35Providing 25 mm to 30 mm thick partition of polished black kadappa stone slab of approved quality including giving required size and shape etc. Fixing in cement mortar 1:3 curing and cement etc. complete. a) One side polish Bd.M.35 B/P Number393
36Providingsoakpitofsize 120cm x120cm x120cmincluding excavatingandfilling with brick-bats. Bd.V.46, Page Number 576
37ROYALTY CHARGES :- Supply of Rubble, Murum, Soil, 60mm./40mm. metal (Hand broken), royalty charges are not included in the rates.[As per Govt. of Maharashtra, Revenue and Forest Departments Gazette No.146 Dt.04 June ,2021. States that the royalty charges ofRs.211.95/Cu.M. ) are considered. The surcharge levied on Royalty shall also be payable to the contractor. ROYALTY CHARGES FOR SAND
3810% ROYALTY MINERALS FUND CHARGES FOR SAND
39(B) ROYALTY CHARGES FOR OTHER MINERALS
40Laboratory testing charges are not considered in the Rate Abstracts. Where ever required separate item shall be taken in the estimate for material testing charges, on the basis of testing frequency and charges fixed by Vigilance & Quality Control Circle, for the current year and shall form part of tender.testing of material by Quality control and certified quality must be use by contractor. CONCRETE Compressive Strength of C. C. Cube (Set of 3 Cubes)
41BRICKS Water Absorption, Compressive Strength, Efflorescence
42PART II- ADD 18% GST
430.50% FOR LABOUR INSURANCE
44Supplying and erecting HMS PVC conduit 25 mm dia with PVC accessories on wall /ceiling as per specification No:WG-MA/CON.
45Supplying & erecting mains with 2x1.5 sq.mm F.R copper PVC insulated wire laid in provided conduit/trunking/insidepole/Bus bars or any other places as per specification No: WGMA/BW
46Supplying & erecting mains with 1x1.5 sq.mm F.RLSH COPPER PVC insulated wire laid in provided conduit/trunking/insidepole/Bus bars or any other places as per specification No: WGMA/BW
47Supplying & erecting mains with 2x2.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/insidepole/Bus bars or any other places as per specification No: WGMA/BW
48Supplying and erecting mains with ISI mark WP 2 x 2.5 sq. mm. 1100 V grade aluminium PVC insulated and PVC sheathed wires on G.I. bearer wire No. 8 SWG complete erected with required size
49Supplying and erectingmodular type switch 6A / 10A duly erected on provided plate and box with wiring connections complete
50Supplying and erectingmodular type 3 pin 6Amultisocket with safety shutter, duly erected on provided plate and box with wiring connections complete.
51Supplying and erectingmodular type switch 16Aduly erected on provided plate and box with wiring connections complete.
52Supplying and erectingmodular type 3 pin 6 / 16Amultisocket with safety shutter,duly erected on provided plate and box with wiring connections complete.
53Supplying and erecting regular/ standard model ceiling fan of 900 /1050 mm. sweep complete erected in position as per specification no. FG-FN/CF
54Supplying and erecting PVC Surface modular switch box with double mounting plate for 12module duly erected.
55Point wiring for light/bell/exhaust fan in PVC trunking (casing-capping) with 1.5 sq.mm (2+1E) FRLSH grade copper wire, modular type switch, earthingand required accessories as per specification No: WG-PW/SW
56Supplying and erectingmodular type (two module) electronic step regulator for fan, duly erected on provided plate and box with wiring connections complete.
57Wiring for plug on board withSwitch socket surface/concealed type, copper wiring and earthing and with modular accessories as per specification No: WG-PW/CW
58Supplying & erecting inverter LED batten 10W tube light fitting with polycarbonate housing, heat sink, integrated HF electronic driver, Min. 2600 mAh Lithium ion Battery with charging time of 8-10 Hours and backup time of Min. 3 hrs. with minimum 25% of initial Watts having luminous efficacy of 100 lumen/watt,CRI>80, CCT of 6500K and THD<=20% havinguseful life of minimum 25000 hrs. with overheating protection with 2 years warranty.
59Supplying & erecting 10-12W, 230V integral type LED Lamp suitable for B-22 / E-27 base.
60Supplying, erecting & marking SPMCB 6A to 32A, B-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB
61Supplying, erecting & marking DPMCB 6A to 32A, C-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB
62Supplyingand erecting single pole and neutral distributionboard (SPNDB), with 2 ways for incoming and 2 ways (2 poles) for outgoing SP MCBs, with door, 1.2mm thickness surface / flush mounted, IP 43 Protection on iron / GI frame as per specification no. SW-SWR/MCBDB
63Providingpipetype earthing with 40mm. dia. G.I. pipe or 20 mm dia. G.I. Rodcomplete with all materials testing and recording the results as per specification no. EA-EP
64ADD II- 18 % FOR GST

AI Tender Summary

OUR REF NO 38138362
AUTHORITY Government Departments
TENDER VALUE 11.09 Lakhs
LAST DATE 19-06-2023
Authority
Authority Name Rural Development Department
Work Description Tender For Construction Of Mini Anganwadi No. 1 Building At Mahandol Tq. Chakur For The Year 2022-23
Basic Detail
Tender No ZPL/W/E-T/60/2023-24
Bidding Type Tender
Location
City chakur
State Maharashtra
Key Dates
Publish Date 12 Jun 2023
Submission Date 19 Jun 2023
Open Date 21 Jun 2023
Finance
Tender Value 11.09 Lakhs
Tender Fee 590
EMD 11094
Exemption Not Available
Document List
f5ccb72e-f07f-4f45-b545-e257dcf6fb57.html
BOQ_1592823.xls
D.D.BELOW.pdf
Tendernotice_1.pdf
Tendernotice_2.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Jun 12, 2023
11:30 IST

Tender Published

Tender notice published.

Completed
Jun 19, 2023
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Completed
Jun 21, 2023

Bid Opening Date

Technical bids will be opened and evaluated.

Completed

Tender Documents

Download All (ZIP) ↓
html

f5ccb72e-f07f-4f45-b545-e257dcf6fb57.html

xls

BOQ_1592823.xls

D

D.D.BELOW.pdf

pdf

Tendernotice_1.pdf

pdf

Tendernotice_2.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender