|
| 1 | Earth work excavation for foundation in all kinds of soils and subsoils to full depth as may be directed except hard rock requiring blastering inclusive of shoring strutting and bailing out water wherever necessary and refilling the sides of foundation which excavated earth in layer of 15cm thick well rammed and consolidated and depositing the surplus earth within the compound in places shown by the departmental officers with intial lead of 10 metres and initial lift of 2 metres etc., complete. |
| 2 | Cement concrete 1:4:8 mix ( One cement four sand and eight aggregate) using 40mm ISSmetal including mixing, laying, consolidating curing cost and conveyance of all materials to site and all labour charges etc., complete as per standard specification. |
| 3 | Centering for soffits of RCC slabs of plane surface like lintels, beams ,etc.,including strutting 3m high using mild steel sheets of size 90cm X60cm X and B.G 10 stiffened with M.S angles of size 25mm X 25mm X 3mm laid over silver Oak (C.W) joists of size 10cm X 6.5cm (spaced at about 90cm c/c )and supported dy casurina props of 10cm to 13cm dia (spaced of 75cm C/C) complying with standard specification and directed - 10 m 2 (P & D)Data 38 |
| 4 | Plain Cement Concrete 1:2:4 (one cement, two fine aggregates and four coarse aggregates) using 20mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour chargesetc., complete as per standard specification |
| 5 | Supplying, fabricating, erecting structural steel work for roofing welded or bolted type using MS channels, angles, plates and round bars etc. conforming to IS specification including primer coating and enamal painting as per Design given by the departmental officers etc, complete as per standard specification |
| 6 | Providing chain link fencing using 10mm gauge at 2\" x 2\" size including tying with binding wire including cost, conveyance of all materials at site and all labour charges etc., complete as per standard specification |
| 7 | Fabricating supplying and fixing of pre painted galvanized iron sheets with the following specification. The materials should be of PPGI tile profile with a red colour or any other approved design 0.47 mm thick 24 guage having width 1050 mm. The sheet should be G.I.base pre painted hot dipped galvanized iron sheet and to be fixed with shelf tapping screws,plastic washer.The washer and screws to be fixed by using minute power machine drilled with out damaging the sheets paint coating to be regular modified polyster coat with zinc coating of Z 120 GSM paint thickness the finish should be terra cotta finish like malabar mangalore tiles finish optional matt finish. The sheet to be fixed with making suitable corrugated,cutting the sheet in to the required ssize and making ornamental designs as per the site condition and as directed by the departmental officers. |
| 8 | Painting two coats with Ready Mixed Enamel Paint over the new iron works of approved quality and colour without priming coatincluding the cost all materials etc.,complete, in all floors. |
| 9 | Towards the charges for providing Well Name Board upto 4 m length x 0.30m width arch or rectangle type With MS Plate welding , lettering charges including all labour charges etc complete.,( LMR) |
| 10 | Supply and fixing in position of weld mesh door made with 7.50cm x 2.50cm 10 Gauge weld mesh and supported with 25 x 5mm M.S.Patta and framed with 35 x 35 x 5mm M.S. L angle including cost and conveyance of materials and all labour charges for welding, jointing and fixing in position etc., complete complying with SS. |
| 11 | GST 18% |
