Tender For Supply Of Furniture For 11 No. Vkc Building In Distt. Kaithal, kaithal-Haryana

Tender For Supply Of Furniture For 11 No. Vkc Building In Distt. Kaithal-- 1 Supply Of Furniture For 11 No. Vkc Building In Distt. Kaithal 2 Sarpanch Table Providing And Placing Of Table With Dimensions 2100 Width X 900 Depth X 740 Height . The Top Shall Be Made From 25 Mm Thick Pre- Laminated Board . All The Edges Are Sealed With 2 Mm Thick Pvc Edge Band All Around . Side Panels Shall Be Made From 25 Mm Thick Pre- Laminated Paticle Board . All The Edges Are Sealed With 2 Mm Thick Pvc Edge Band On The User Side And 0.8 Mm On The Top And Bottom Side .The Side Panels Have 2 Glide Screws Each For Levelling Of The Desk.Modesty Panel Shall Be Made From 18 Mm Thick Pre- Laminated Particle Board . All The Edges Are Sealed With 0.8 Mm Thick Pvc Edge Band All Around. Freestanding Pedestal Shall Be Made From 18 Mm Pre- Laminated Particle Board With A Combination Of 2 Mm And 0.8 Mm Pvc Edge Band On All The Exposed Surfaces As Per Requirement .The Drawers Are Provided With Suitable Slides For Smooth Operation . All The Pedestal Drawers Are Centrally Locked With A Single Key . The Oem Should Be Havig Valid Iso 9001:2015, Iso-14001:2015 , Iso 50001:2018 , Iso45001:2018 Certificates As Per Nabcb Guidelines. The Certifying Agencies Should Be Accredited By Nabcb. 3 Sarpanch Revolving Chair High Back :- Providing And Placing Of Valid Iaq Gold Certified High Back Chair. The Seat And Back Should Be Made Up Of 1.2 ±0.1Cm. Thick Hot-Pressed Plywood And Upholstered With .Fabric Upholstery Covers And Moulded Polyurethane Foam. The Back Foam Should Be Designed With Contoured Lumbar Support For Extra Comfort. The Seat Has Extra Thickfoam On Front Edge To Give Comfort To Popliteal Area. Back Size Should Be 47.5 Cm. ( W ) X 69.5 Cm ( H ) And Seat Size Should Be 47.0 Cm. ( W ) X 48.0 Cm. ( D ) The Hr Polyurethane Foam Should Be Moulded With Density = 45±2 Kg / M3 And Hardness Load 16 ± 2 Kgf For 25% Compression. The One-Piece Armrests Should Be Injection Moulded From Black Co-Polymer Polypropylene. The Mechanism Should Be Central Tilt Synchro Designed With The Following Features: • 360° Revolving Type. • Upright-Position Locking • Tilt Tension Adjustment• Seat / Back Tilting Ratio Of 1:3. The Pneumatic Height Adjustment Has An Adjustment Stroke Of 12.0 ±0.3Cm.The Bellow Should Be 3 Piece Telescopic Type And Injection Moulded In Black Polypropylene. The Pedestal Should Be Injection Moulded In Black 33% Glass-Filled Nylon-66 And Fitted With 5 Nos. Twin Wheel Castors. The Pedestal Should Be 66.3±0.5Cm. Pitch-Center Dia. ( 76.3 ±1.0Cm With Castors ) . .The Twin Wheel Castors Should Be Injection Moulded In Black Nylon. Overall Dimensions Of Chair Seat Height - Min 42.5 To Max 54.5Cm. Height - Min97.0 To Max 109.0Cm. Width & Depth Of Chair As Measured From Pedestal - Width-76.3 Cm And Depth-76.3 Cm. The Oem Should Be Havig Valid Iso 9001:2015, Iso-14001:2015 , Iso 50001:2018 , Iso45001:2018 Certificates As Per Nabcb Guidelines. The Certifying Agencies Should Be Accredited By Nabcb. The Product Certifications Likegreen-Guard, Iaq Gold, Green-Pro, Bifma From Valid Certification Bodies To Be Uploaded With The Bid And Quoted Model Name To Be Present On Thecertification Website. 4 Sarpanch Visitor Chair :- Providing And Placing Of Valid Iaq Gold Certified Visitor Chair . The Seat And Back Should Be Made Up Of 1.2 ±0.1Cm. Thick Hot-Pressed Plywood And Upholstered With .Fabric Upholstery Covers And Moulded Polyurethane Foam. The Back Foam Should Be Designed With Contoured Lumbar Support For Extra Comfort. The Seat Has Extra Thick Foam On Front Edge To Give Comfort To Popliteal Should Be Area Back Size 47.5 Cm. ( W ) X58.0 Cm ( H ) Seat Size 47.0 Cm. ( W ) X 48.0 Cm. ( D ) The Hr Polyurethane Foam Should Be Moulded With Density = 45±2 Kg / M3 And Hardness Load 16 ± 2 Kgf For 25% Compression. The One-Piece Armrests Should Be Injection Moulded From Black Co-Polymer Polypropylene. The Powder Coated ( Dft 40-60 Microns ) Tubular Frame Should Be Cantilever Type & Made Of 0 2.54 ±0.03Cm. X 0.2±0.016Cm.Thk. M.S. Er.W. Tube.Overall Dimensions Of Chair Seat Height - 46.5Cm. Height - 89.5Cm. Width & Depth Of Chair As Measured From Pedestal - Width-61.4 Cm And Depth-64.5 Cm. The Oem Should Be Havig Valid Iso 9001:2015, Iso-14001:2015 , Iso 50001:2018, Iso 45001:2018 Certificates As Per Nabcb Guidelines. The Certifying Agencies Should Be Accredited By Nabcb. The Product Certifications Like Green-Guard, Iaq Gold, Green-Pro, Bifma From Valid Certification Bodies To Be Uploaded With The Bid And Quoted Model Name To Bepresent On The Certification Website. 5 Table For Meeting Room :- Providing And Placing In Place Of Iaq Certified Conference Table. The Overall Dimensions Of The Table Shall Be 4200 X 1200 X 750Mm. These Terminating Leg Structure Shall Be In M.S. Crca Sheet / Tubes / Rods As Per Is. 513 / 7138 / 432 Finished With Epoxy Power Coating Of The Approved Colour As Per The Project Designer.Worktop Shall Be Made Of 25Mm Thickpre-Laminated Board Conforming To Is: 12823. All The Edges Of Work Surface Shall Be Provided With Machine Pressed 2 Mm Thick Pvc Lipping Glued With Hot Melt Eva Glue. Cross Members In The Upbeat System Are Made From 50 Mm X 25 Mm X1.2 Mm Thick. Cross Members Are Assembled By Friction Fit Pdc Joinery And Grub Screws. All Cross Members Are Mounted At A Distance Of 165 Mm From Worktop Sides. Wire Management: Wire Tray With Integrated Power Box Made With A Combination Of 0.6 Mm Thick Crca Outer Body And 0.8 Mm Thick Crca Switch Plate ( 8+3 Anchor Roma ) Module Cut Out As Standard. They Are Mounted On Worktop. The Oem Should Be Havig Valid Iso 9001:2015, Iso-14001:2015 , Iso 50001:2018 , Iso 45001:2018 Certificates As Per Nabcb Guidelines. The Certifying Agencies Should Be Accredited By Nabcb. The Product Certifications Like Green-Guard, Iaq Gold, Green-Pro, Bifma From Valid Certification Bodies To Be Uploaded With The Bid And Quoted Model Name To Be Present On The Certification Website. 6 Chairs For Meeting Room :- Providing And Placing Of Valid Iaq Gold Certified Visitor Chair . The Seat And Back Should Be Made Uo Injection Moulded High Impact Strenght Polypropylene Polymer Compound With Indoor Graade Uv Resistance.The Tubular Weled Frame Is Made From Dia2.22 + / - 0.03Cmx 0.12+ / - 0.0128 Cm And 3.5+ / - 0.03 Cm X 0.12+ / - 0.0128 Am Stainless Steel 202 Grade Tube.The Tube Are Buff Polished To Give Shiny Finish. Cm. The Shoes Are Made Of High Impact Strenght Polypropylene Polymer Compond With Indoor Grad Uv Resistance And Pressed Fitted With Tubularfram. Size : ( W ) 52.5Cm* ( D ) 55.8Cm* ( H ) 84.5Cm* ( Seat H ) 45.0 Cm. Seat Size 52.5Cm ( W ) *53.2 Cm ( D ) Back Size51.6 Cm ( W ) *40.5 Cm ( H ) . The Oem Should Be Havig Valid Iso 9001:2015, Iso-14001:2015 , Iso 50001:2018 , Iso 45001:2018 Certificates As Per Nabcb Guidelines. The Certifying Agencies Should Be Accredited By Nabcb. The Product Certifications Like Green-Guard, Iaq Gold, Green-Pro, Bifma From Valid Certification Bodies To Be Uploaded With The Bid And Quoted Modelname To Be Present On The Certification Website. 7 Staff Chair :- Providing And Placing Of Valid Iaq Gold Certified Chair Wherein The Chair Should Have One Common Frame Of Seat And Back. The Cushioned Seat Assembly Consists Of Seat Base Moulded Inglass-Filled Poly-Amide, Moulded Polyurethane Foam & Upholstered With High Stretch Knitted Polyester Fabric. The Cushioned Back Assembly Consists Of Back Inner Moulded In Polypropylene In-Situ Moulded With Polyurethane Foam & Upholstered With High Stretch Knitted Polyester Fabric. Full Back Size : 45.5 Cm. ( W ) X 53.0 Cm. ( H ) *Seat Size :48.5 Cm. ( W ) X 49.0 Cm. ( D ) The Hr Polyurethane Foam Used In Seat And Back Cushion Is Moulded In Density 45±2 Kg / M3, And Hardness Load 16 ± 2 Kgf As Per 15:7888 For 25%Compression. The Seat And Back Are Firmly Connected To The Base Frame And Are Cantilevered In Such A Way That It Gives A Multi-Dimensional Movement Possibility Just With A Simple Lean On The Sides Or Back, Without Need For Complex Manual Adjustments. The Cantilevered Seat Offers Impact Cushioning While Sitting And Synchronises With The Back Movement During Posture Changes. The 5 Shaped Spines Moulded In High Strength Glass-Filled Poly-Amide And The Spine Connector Moulded In Glass-Filled Poly-Am ) De Form Theback-Spine Structure Involved Inmulti-Dimensional Recline Motion. The Variable Tilt Angle Recline Motion Can Be Adjusted With 3 Position Tilt Limit Feature Which Is Inbuilt In Seat Base And The Tension ( Return Force ) Is User Weight Dependent. The Assembly Consists Of Armrest Housing Sliding Over The Armrest Structure, Both Moulded In Glass-Filled Poly-Amide. The Height Adjustment Feature Is Button Operated Having Adjustment Of 6.6±0.5Cm. The Armrest Top Is Made Up Of Integral Skin Pu Moulded Over Plastic Inner Moulded In Glass-Filled Poly-Amide.The Seating Height Can Be Adjusted With A Pneumatic Gas-Lift Having An Adjustment Stroke Of 9.2 ± 0.3 Cm The Pedestal Is Injection Moulded In Glass-Filled Poly-Amide And Fitted With 5 Nos. In Wheel Castors. The Pedestal Is 66.0±0.5 Cm. Pitch Centre Diameter And 76.0±1.0 Cm. With Castors. Twin Wheel Castors Are Injection Moulded Inpoly-Amide Having 5.0±0.1Cm Heel Diameter And Assembled To The Pedestal. The Powder Coated ( Dft 40-60 Micron ) Tubular Frame Is Cantilever Type & Lade Of 02.54±0.03 Cm X 0.3±0.016 Cm Thk Ms Erw Tube. Shoes Are Made Of Glass-Filled Poly-Amide And Fixed The Tubular Frame.Dimensions Measured Out To Out Extreme Point ) On Components In Knockdown Condition, Variations Within ±1.0 Cm. ( W ) 76 ( D ) 76* ( H ) 99.5-108.8Cm Seat ( H ) 44.5-53.8Cm. The Oem Should Be Havig Valid Iso 9001:2015, Iso-14001:2015 , Iso 50001:2018 , Iso 45001:2018 Certificates As Per Nabcb Guidelines. The Certifying Agencies Should Be Accredited By Nabcb. The Product Certifications Like Green-Guard, Iaq Gold, Green-Pro, Bifma From Valid Certification Bodies To Be Uploaded With The Bid And Quoted Model Name To Be Present On The Certification Website

INR 5000 /-

Refer document