Tender For Construction Of 01 No Girls Toilet At Naydrone S.B. School Under R.D. Kanchanpur Division During The Year 2023-24.
Tender Value
4.17 Lakhs
Estimated cost
Bid Submission
27 Jun 2023
0 days left
EMD
8351
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
panisagar → Tripura
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of 01 No Girls Toilet At Naydrone S.B. School Under R.D. Kanchanpur Division During The Year 2023-24. Construction Work
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation by mechanical means (Hydraulicexcavator) / manual means over areas (exceeding 30cm indepth, 1.5m in width as well as 10 sqm on plan) includingdisposal of excavated earth, lead upto 50m and lift upto1.5m, disposed earth to be levelled and neatly dressed.-All kinds of soil |
| 2 | Earth work in excavation by mechanical means (Hydraulicexcavator) / manual means in foundation trenches ordrains (not exceeding 1.5 m in width or 10 sqm on plan)including dressing of sides and ramming of bottoms, liftupto 1.5 m, including getting out the excavated soil anddisposal of surplus excavated soil as directed, within a leadof 50 m.-All kinds of soil |
| 3 | Filling available excavated earth (excluding rock) intrenches, plinth, sides of foundations etc. in layers notexceeding 20cm in depth, consolidating each depositedlayer by ramming and watering, lead up to 50 m and liftupto 1.5 m.-All kinds of soil |
| 4 | Supplying and filling in plinth, under floor, foundations etc. with sand (fine) from local quarry with all lifts includingspreading in horizontal layers, watering, grading torequired slope, ramming, consolidating and compactingeach layer by using plate compactor or by any suitablemethod complete. |
| 5 | Providing and laying in position cement concrete ofspecified grade excluding the cost of centring andshuttering --All work upto plinth level:4.1.15 1:4:8 ( 1 Cement: 4 fine sand : 8 graded well burntbrick aggregate 40 mm nominal size) |
| 6 | 4.17 Making plinth protection 50mm thick of cementconcrete 1:3:6 (1 cement : 3 fine sand : 6 graded wellburnt brick aggregate 20 mm nominal size) over75mm bed of dry brick ballast 40mm nominal sizewell rammed and consolidated and grouted with finesand including finishing the top smooth. |
| 7 | Providing and laying in position specified grade ofreinforced cement concrete excluding the cost ofcentring, shuttering, finishing and reinforcement--All work upto plinth level:5.1.2 1:1½:3 ( 1 Cement: 1½ fine sand : 3 graded stoneaggregate 20 mm nominal size) |
| 8 | Reinforced cement concrete work in walls (anythickness), including attached pilasters, buttresses,plinth and skirting courses, fillets, columns, pillars,piers, abutments, posts and struts etc. upto floor fivelevel excluding cost of centring, shuttering, finishingand reinforcement5.2.2 1:1½:3 ( 1 Cement: 1½ fine sand : 3 graded stoneaggregate 20 mm nominal size) |
| 9 | Reinforced cement concrete work in beams, suspendedfloors, roofs having slope upto 15° landings, balconies,shelves, chajjas, lintels, bands, plain window sills,staircases and spiral stair cases upto floor five levelexcluding the cost of centring, shuttering, finishingand reinforcement5.3.2 1:1½:3 ( 1 Cement: 1½ fine sand : 3 graded stoneaggregate 20 mm nominal size) |
| 10 | 5.8 Centering shuttering including struttings, propping etc.and removal of form work for:5.8.1.1 Foundations, footings, bases for columns etc. for massconcrete with timber plank |
| 11 | 5.8.6.1 Columns, Pillars, Piers, Abutments, Posts and Struts withshuttering ply |
| 12 | 5.8.5.1 Lintels, beams, plinth beams, girders, bressumers andcantilevers with shuttering ply |
| 13 | 5.8.4.1 Suspended floors, roofs, landings, balconies and accessplatform with timber planks |
| 14 | 5.20 Reinforcement for R.C.C. work including straightening,cutting, bending, placing in position and binding allcomplete above plinth level.5.20.4 Thermo-Mechanically Treated bars of grade Fe-500D ormore |
| 15 | First class brick work in foundation and plinthincluding cost of all materials as required complete:-6.1.5 In cement mortar 1:6 ( 1 cement : 6 fine sand ). |
| 16 | Half brick masonry work with first class bricks insuperstructure upto floor five level including cost ofall materials as required complete:-6.12.3 In cement mortar 1:4 ( 1 cement : 4 fine sand ). |
| 17 | Providing and fixing factory made door frame (singlerebate) made of solid PVC foam profile withhomogenous fine cellular structure having smoothouter integral skin having 60mm width & 30mmthickness and shall be fixed to wall as perinstructions of Engineer-In-Charge using 100x8 sheetmetal CSK screws. |
| 18 | Providing and fixing 28 mm thick door shutter madeof solid PVC foam profile with homogenous finecellular structure having smooth outer integral skinhaving 71mm width & 28mm thick as vertical &horizontal styles. Joints are made using solventadhesive and GI ‘C sections (39mm x 19mm x 0.6mmthick) or M S pipe (40mm x 20mm ) stiffener frameinsert & telescopic polymeric ‘L’ corners .The panelshall be filled with 3mm thick high - pressurecompact laminate as per manufacturer’sspecifications and directions of the Engineer-in charge, cover moulding shall be provided forcovering fixing screws and elegant look.( for W.C.bathroom door shutter) |
| 19 | Providing and fixing M.S. grills of required pattern inframes of windows etc. with M.S. flats, square orround bars etc. all complete.8.46.2 Fixed to openings /wooden frames with rawl plugsscrews etc. |
| 20 | 16.9 Providing and fixing double glazed hermetically sealedglazing in aluminium windows, ventilators and partitionetc. with 6 mm thick clear float glass both side having 12mm air gap including providing EPDM gasket, perforatedaluminium spacers, desiccants, sealant (both primary andsecondary sealant) of approved quality etc.complete asper specification, drawing and direction of Engineer-incharge. |
| 21 | 9.5 Providing and fixing 1mm thick M.S. sheet door withframe of 40x40x6mm angle iron and 3mm M.S. gussetplates at the junctions and corners, & with cleats withbolts & nuts, rivets, locking arrangement, handles, hooks& eyes, pinlets including embedding in cement concreteof required grade for fixing in position, all necessaryfittings, including applying a priming coat of approvedsteel primer etc. complete as required:-9.5.1 Using M.S. angels 40x40x6 mm for diagonal braces. |
| 22 | 10.5 Cement concrete flooring 1:2:4 (1 cement : 2 fine sand : 4graded stone aggregate) finished with a floating coat ofneat cement, including cement slurry, but excluding thecost of nosing of steps etc. complete.10.5.1 40 mm thick with 20 mm nominal size stone aggregate |
| 23 | 10.55 Providing and fixing precast chequered cement concretetiles 18 mm thick, laid in footpath & courtyard, on 20mm thick bed of cement mortar 1 : 4 ( 1 cement : 4 finesand ) jointed with neat cement slurry including rubbingand cleaning complete as per direction of the Engineer-in Charge. |
| 24 | 10.38 Providing and fixing 1st quality ceramic glazed wall tiles(minimum 200 x 300) conforming to IS : 15622 - 2017(thickness to be specified by the manufacturer) ofapproved make in all colours, shades of any size asapproved by Engineer-in-charge in skirting, risers ofsteps and dados, laid over 12 mm thick bed of cementmortar 1 : 3 (1 cement : 3 fine sand) jointed withordinary cement slurry including pointing with whitecement mixed with pigment of matching shade complete. |
| 25 | 10.39 Providing and laying ceramic floor tiles in different sizes(thickness to be specified by the manufacturer) of 1stquality conforming to IS : 15622 - 2017 of approvedmake in colours such as White, Ivory, Grey, Fume RedBrown, laid over 20 mm thick cement mortar 1:4 (1cement : 4 fine sand), Jointing with grey cement slurry @3.3 kg/sqm including pointing the joints with whitecement and matching pigment etc. complete.10.39.1 Mat Finish Tiles10.39.1.1 Ceramic Tiles 1st quality 300 x 300mm in all shades anddesigns |
| 26 | 12.4 6 mm cement plaster of mix :12.4.1 Cement mortar 1:3 (1 cement : 3 fine sand) |
| 27 | 12.1 12 mm cement plaster of mix12.1.4 Cement mortar 1:6 (1 cement : 6 fine sand) |
| 28 | 12.1 12 mm cement plaster of mix12.1.2 Cement mortar 1:4 (1 cement : 4 fine sand) |
| 29 | 15 mm cement plaster on the rough side of single orhalf brick wall of mix:12.2.4 Cement mortar 1:6 (1 cement : 6 fine sand) |
| 30 | Neat cement punning |
| 31 | Distempering with oil bound washable distemper ofapproved brand and manufacture to give an even shade[Payment shall be made after submission of TestCertificate issued by the Manufacturer] :12.24.1 New work ( two or more coats) over and including waterthinnable priming coat with cement primer. |
| 32 | 12.28 Finishing walls with water proofing cement paint ofrequired shade of approved brand and manufacture[Payment shall be made after submission of TestCertificate issued by the Manufacturer] :12.28.1 New work ( two or more coats applied @ 3.84 kg/10 sqm) |
| 33 | 12.27 Applying one coat of water thinnable cement primer ofapproved brand and manufacturer on wall surfacecomplete.12.27.1 Water thinnable cement primer |
| 34 | Painting with synthetic enamel paint of approved brandand manufacture to give an even shade [Payment shallbe made after submission of Test Certificate issued bythe Manufacturer]: 12.47.1 Two or more coats on new work |
| 35 | Providing and fixing ball valve (brass) of approvedquality High or low pressure, with plastic floatscomplete :19.18.3 25 mm nominal bore |
| 36 | 19.21 Providing and fixing uplasticised PVC connectionpipe with brass unions :19.21.2 45 cm length19.21.2.1 15 mm nominal bore |
| 37 | 19.49 Providing and fixing C.P. brass bib cock of approvedquality conforming to IS:893119.49.1 15 mm nominal bore |
| 38 | 19.53 Providing and fixing C.P. brass angle valve for basinmixer and geyser points of approved qualityconforming to IS:893119.53.1 15 mm nominal bore |
| 39 | 19.75 Providing and fixing PTMT extension nipple for watertank pipe, fittings of approved quality and colour.19.75.3 25 mm nominal bore. Weighing not less than 62 gm. |
| 40 | 19.1 Providing and fixing Polyethelene AluminiumPolyethelene(PEALPE)Composite Pressure Pipesconforming to IS 15450U.V. stabilized withcarbon black having thermal stability for hot &cold water supply, capable to withstand temperatureup to 800 C including all special fittings ofcomposite material (engineering plastic blend andbrass inserts wherever required) e.g. elbows, tees,reducers, couplers & connectors etc. with clamps at1.00 metre spacing. This includes testing of jointscomplete as per direction of the Engineer in charge.Internal work - Exposed on wall19.1.1 1216 (16 mm OD) pipe |
| 41 | 19.1.3 2025 (25 mm OD) pipe |
| 42 | 19.65 Providing and fixing PTMT soap Dish Holder havinglength of 138mm, breadth 102mm, height of 75mmwith concealed fitting arrangements weighing notless than 106 gm |
| 43 | 19.48 Providing and placing on terrace (at all floor levels)polyethylene water storage tank ISI : 12701 markedwith cover and suitable locking arrangement andmaking necessary holes for inlet, outlet and overflowpipes but without fittings and the base support fortank. |
| 44 | 18.1 Providing and fixing water closet squatting pan (Indiantype W.C. pan ) with 100mm sand cast Iron P or S trap,10 litre low level white P.V.C. flushing cistern withmanually controlled device (handle lever) conformingto IS : 7231, with all fittings and fixtures completeincluding cutting and making good the walls and floorswherever required :18.1.1 White Vitreous china Orrisa pattern W.C. pan of size580x440 mm with integral type foot rests. |
| 45 | 18.2 Providing and fixing white vitreous china pedestaltype water closet (European type W.C. pan) with seatand lid, 10 litre low level white P.V.C. flushingcistern with manually controlled device (handle lever),conforming to IS : 7231, with all fittings and fixturescomplete including cutting and making good the wallsand floors wherever required :18.2.1 W.C. pan with ISI marked white solid plastic seat and lid |
| 46 | 18.25 Providing and fixing white vitreous china wash basinincluding making all connections but excluding the costof fittings:18.25.1 Flat back wash basin of size 630x450mm. |
| 47 | 18.24 Providing and fixing white vitreous china squatting plateurinal with integral rim longitudinal flush pipe. |
| 48 | 18.73.2 600mm long towel rail with total length of 645mm, width78mm and effective height of 88mm, weighing not lessthan 190gm. |
| 49 | 18.31 Providing and fixing 600x450 mm bevelled edge mirrorof superior glass (of approved quality) complete with 6mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. |
| 50 | Providing and fixing P.V.C. waste pipe for sink or washbasin including P.V.C. waste fittings complete.18.28.2 Flexible pipe18.28.2.1 32 mm dia |
| 51 | 18.86 Providing and fixing to the inlet mouth of rain water,soil, waste & vent pipes pipe PTMT grating withthickness of 8mm and weighing not less than 100gm.18.86.2 100mm |
| 52 | 18.82 Providing and fixing on wall face unplasticised RigidPVC rain water, soil, waste & vent pipes (workingpressure 4 kg / cm2) conforming to IS : 13592 Type Aincluding jointing with seal ring conforming to IS :5382 leaving 10 mm gap for thermal expansion:18.82.1 Single socketed pipe - 75 mm OD |
| 53 | 18.82 Providing and fixing on wall face unplasticised RigidPVC rain water, soil, waste & vent pipes (workingpressure 4 kg / cm2) conforming to IS : 13592 Type Aincluding jointing with seal ring conforming to IS :5382 leaving 10 mm gap for thermal expansion:18.82.2 Single socketed pipe - 110 mm OD |
| 54 | 18.84 Providing and fixing on wall face unplasticised - PVCmoulded fittings/ accessories for unplasticised RigidPVC rain water, soil, waste & vent pipes pipesconforming to IS : 13592 Type A including jointingwith seal ring conforming to IS : 5382 leaving 10 mmgap for thermal expansion:18.84.1 Coupler18.84.1.1 75 mm |
| 55 | Providing and fixing on wall face unplasticised - PVCmoulded fittings/ accessories for unplasticised RigidPVC rain water, soil, waste & vent pipes pipesconforming to IS : 13592 Type A including jointingwith seal ring conforming to IS : 5382 leaving 10 mmgap for thermal expansion:18.84.1 Coupler18.84.1.2 110 mm |
| 56 | 18.84.3 Single equal tee without door18.84.3.1 75x75x75 mm |
| 57 | 18.84.3 Single equal tee without door18.84.3.2 110x110x110mm |
| 58 | 18.84.4 Single equal tee with door18.84.4.1 75x75x75 mm |
| 59 | 18.84.4 Single equal tee with door18.84.4.2 110x110x110mm |
| 60 | 18.84.5 Bend 87.5°18.84.5.1 75mm |
| 61 | 18.84.5 Bend 87.5°18.84.5.2 110mm |
| 62 | 18.85 Providing and fixing unplasticised -PVC pipe clips ofapproved design to unplasticised - PVC rain water,soil, waste & vent pipes by means of 50x50x50mmhard wood plugs, screwed with M.S. screws ofrequired length including cutting brick work andfixing with cement mortar 1 : 4 (1cement : 4 fine sand)making good the wall etc. complete.18.85.1 75mm |
| 63 | Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water, soil, waste & vent pipes by means of 50x50x50mm hard wood plugs, screwed with M.S. screws of required length including cutting brick work and fixing with cement mortar 1 : 4 (1cement : 4 fine sand) making good the wall etc. complete18.85.2 110mm |
| 64 | 18.61 Cutting chases in brick masonry walls for followingdiameter sand cast iron/centrifugally cast (spun) ironpipes and making good the same with cement concrete1:3:6 ( 1 cement : 3 coarse sand :6 graded stoneaggregate 12.5 mm nominal size ) including necessaryplaster and pointing in cement mortar 1:4(1cement: 4coarse sand):18.61.1 100mmdia. |
| 65 | 20.11 Constructing soak pit 1.20 x 1.20 x 1.20 mfilled with brickbats including S.W. drain pipe100 mm diameter and 1.20 m long complete asper standard design. |
| 66 | Providing and fitting fixing of 1 OHP Mono block including all accessories complete as per the direction of Engineer-in-charge. |
AI Tender Summary
Tender Timeline
Jun 12, 2023
11:30 IST
Tender Published
Tender notice published.
CompletedJun 27, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJun 27, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender