Housing Urban and Rular Development Government Departments Closing in 0 days TDR #38124050

Tender For Construction Work Of Non-Patchable /Missing Link Road And Road From Jhunwasa Head (Badunda) To Aibra (6.5 Km.) (Bundi) Under The Block Offices Under Circle Bundi.

Issued by Government Departments · bundi, Rajasthan
Tender Value
2.03 Crore
Estimated cost
Bid Submission
12 Jun 2023
0 days left
EMD
4.07 Lakhs
Bank guarantee accepted
Document Fee
2000
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
bundi → Rajasthan
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Tender For Construction Work Of Non-Patchable /Missing Link Road And Road From Jhunwasa Head (Badunda) To Aibra (6.5 Km.) (Bundi) Under The Block Offices Under Circle Bundi.

BOQ

Name of Work :- Package No BA-23-24-VSB-04
Sl. No. Item Description
1Clearing and grubbing road land including uprooting rank vegetation, grass, brush, shrubs, saplings and trees of girth upto 300mm, removal of stumps, disposal of unserviceable Material and stacking of serviceable Material upto 1000m from road boundary. (MoRTH Specification : Clause 201). BY MECHANICAL MEANS In area of Thorney Jungle
2djtwuk e.Mkojk jksM ds fdeh0 3@800 ¼lkyfj;k pkSjkgs½ ls HkS#iqjk cjM rdA
3dqy
4Scarifying, including picking up scarified Material and stacking of old serviceable Material within a lead of 1000 meter [MoRTH Specification: Clause 202 & 305.4.3]. Top bituminous surface of surface dressing or SDBC or premix carpet with all lift and lead upto 1000m for reusable Materials.
5djtwuk e.Mkojk jksM ds fdeh0 3@800 ¼lkyfj;k pkSjkgs½ ls HkS#iqjk cjM rdA
6dqy
7Construction of embankment with approved Materials deposited at site from roadway cutting and excavation from drain and foundation of other structures graded and compacted by vibratory roller 8-10 tonne to meet requirement of Tale 300-2 as per MoRTH specification : Clause No. 305
8djtwuk e.Mkojk jksM ds fdeh0 3@800 ¼lkyfj;k pkSjkgs½ ls HkS#iqjk cjM rdA
9dqy
10Providing, laying and spreading and compacting specified graded crushed stone in sub-base course including premixing the Material at OMC in mechanical mixer (Pug mill), carriage of mixed Material, laying in uniform layers with Motor Grader, F.E. Loader, on a prepared surface and compacting with Vibratory Compactor to achieve the desired density including all Material, labour, machinery, lighting barricading and maintenance of Driversion complete. (MoRTH specification clause 401). with all lead & lift
11djtwuk e.Mkojk jksM ds fdeh0 3@800 ¼lkyfj;k pkSjkgs½ ls HkS#iqjk cjM rdA
12dqy
13Providing, laying, spreading and compacting crushed graded stone aggregate as per Table 400-10 & 400.11 to Wet Mix Macadam specifications including premixing the Material with water to OMC in mechanical mixer (Pug mill) as per design mix, carriage of mixed Material by tipper to site laying in uniform layers, with motor grader/F.E. loader/Paver Finisher, in sub-base/base course on a well prepared under-base and compacting with Vibratory Roller to achieve the desired density including lighting, guarding, barricading and maintenance of Driversion etc. (MoRTH specification : Clause 406). with all lead & lift
14djtwuk e.Mkojk jksM ds fdeh0 3@800 ¼lkyfj;k pkSjkgs½ ls HkS#iqjk cjM rdA
15dqy
16Providing, laying and spreading of granular sub-base by providing coarse graded Material, spreading in uniform layers with motor grader on prepared surface mixing by mix in place method with rotavator at OMC, and compacting with vibratory roller to achieve the desired density, complete as per MoRTH Specification : clause No. 401. Grading-III
17djtwuk e.Mkojk jksM ds fdeh0 3@800 ¼lkyfj;k pkSjkgs½ ls HkS#iqjk cjM rdA
18dqy
19Providing and applying primer coat over prepared surface of granular base with bitumen emulsion as per IS:8887 & manufacturer’s specifications @7.50 kg/10 sqm with a self propelled or towed bitumen pressure sprayer equipped for spraying the Material uniformly at specifiedrates and temperatures (including cleaning of road surface) as per MoRTH specification : Cl. 502, 112
20djtwuk e.Mkojk jksM ds fdeh0 3@800 ¼lkyfj;k pkSjkgs½ ls HkS#iqjk cjM rdA
21dqy
22Providing and applying tack coat on the prepared surface, with bitumen emulsion as per IS:8887 & manufacturer’s specifications @0.275 kg/sqm with a self propelled or towed bitumen pressure sprayer equipped for spraying the Material uniformly at specified rates and temperatures (including cleaning of road surface) as per MoRTH specification Cl. 502, 112.
23djtwuk e.Mkojk jksM ds fdeh0 3@800 ¼lkyfj;k pkSjkgs½ ls HkS#iqjk cjM rdA
24dqy
25Providing and laying open graded premix carpet 20mm thick (compacted), on prepared surface in a single course as wearing course, composed of specified graded crushed aggregates as per Table 500-23, heating bituminous binder @ 14.6 kg/10 sqm and aggregates in Hot Mix Plant (including cost of anti-stripping compound, wherever required), transporting the mixed Material with tipper and laying with paver finisher to the required level and grade, rolling with power roller, 8-10 tonne, but excluding cost of tack coat and seal coat with all lead & lift (MoRTH specification : clause 510, 112) In Hot Mix Plant 40-60 TPH, including loading of aggregates with F.E. loader bitumen VG30 grade
26djtwuk e.Mkojk jksM ds fdeh0 3@800 ¼lkyfj;k pkSjkgs½ ls HkS#iqjk cjM rdA
27dqy
28Providing and applying Premixed Seal Coat type “B” comprising of thin application of fine aggregate (0.06 cum per 10 sqm) premix with (6.8 kg per 10 sqm) bitumen binder (including cost of anti-stripping compound, wherever required) in mini hot mix plant 6-10 TPH, and laying with paver finisher and rolling with power roller 8-10 tonne, including all lead of mix Material (MoRTHspecification : clause 511).Bitumen VG30 grade
29djtwuk e.Mkojk jksM ds fdeh0 3@800 ¼lkyfj;k pkSjkgs½ ls HkS#iqjk cjM rdA
30dqy
31Dry lean cement concrete sub - base.Construction of dry lean cement concrete 1:3:6 sub-base over a prepared sub-grade with coarse and fine aggregate conforming to IS: 383, the size ofcoarse aggregate not exceeding 25 mm, aggregate cement ratio not to exceed 15:1, aggregate gradation after blening to be as per Table 600-1, cement content not to be less than 150 Kg/Cum, optimum moisture content to be determined during trial length construction, concrete strength not to be less than 10 Mpa at 7 days, mixed in a batching plant, transported to site, laid with a paver with electronic sensor, compacting with 8-10 tonne vibratory roller, finishing and curing.
32djtwuk e.Mkojk jksM ds fdeh0 3@800 ¼lkyfj;k pkSjkgs½ ls HkS#iqjk cjM rdA
33dqy
34Providing and Laying un-reinforced, dowel jointed, plain cement concrete pavement over a prepared sub-base with 43 grade cement, coarse and fine aggregate conforming to IS:383, maximum size of coarse aggregate not exceeding 25mm, mixed in a batching and mixing plant as per approved mix design, transported to site, laid with a fixed form or Fix form paver, spread, compacted and finished in a continuous operation including provision of contraction, expansion, construction and longitudinal joints, joint filler, separation membrane, sealant primer, joint sealant, debonding strip, dowel bar, tie rod, admixtures and vacuum processing pump as approved, curing compound, finishing to lines and grades as per drawing as per MoRTH Specification : Clause No. 602, 112. Using Cement concrete M-30 pavement Grade
35djtwuk e.Mkojk jksM ds fdeh0 3@800 ¼lkyfj;k pkSjkgs½ ls HkS#iqjk cjM rdA
36dqy
37Providing and Erecting typical Citizens Information Board as per approved drawing & specification of MoRD, made of two MS Sheet of 1.6 mm thick each of size 900 mm × 750 mm stiffened by angle iron 25 mm ×25 mm × 3 mm all around the plate and plates fixed on frame of 75 mm dia pipe of 12 SWG sheet (vertical post 3050 m with angle holdfasts and horizontal member 900 mm) to be joined by 5 mm thick MS plate at 12 places (65 × 50 mm) duly embedded in cement concrete M-15 grade of block of 600 mm × 600 mm × 750 mm size below ground level as per enclosed drawings & as directed by Engineering - In-Charge. All MS will be stove enameled on both side, Lettering, figuring and border will be with ready mixed synthetic enamel paint of superior quality in required shade and colour etc. complete in all respect. All sections of framed post and steel tube will be painted with primer and two coat of epoxy paint as per drawing and as per MoRD specification.
38djtwuk e.Mkojk jksM ds fdeh0 3@800 ¼lkyfj;k pkSjkgs½ ls HkS#iqjk cjM rdA
39dqy
40Supply of villege Name Board size 600x900 mm made out of 1.25 mm thick M.S. Sheet duly framed with 30mm Outer Dia Mild Steel tube tightened with M.S. flat 12x3 mm fixed on two posts of size 40 mm ODMS tube 3M long whole board is processed in blue/white stoving enamel paint and white/red machine cut reflective sheet complete in all respect posts duly painted with black/white synthetic enamel.
41djtwuk e.Mkojk jksM ds fdeh0 3@800 ¼lkyfj;k pkSjkgs½ ls HkS#iqjk cjM rdA
42dqy
43Kilometre Stone Reinforced cement concrete M15grade kilometre stone of standard design as per IRC:8-1980, fixing in position including painting and printing etc Ordinary kilometer stone (precast)
44djtwuk e.Mkojk jksM ds fdeh0 3@800 ¼lkyfj;k pkSjkgs½ ls HkS#iqjk cjM rdA
45dqy
46Kilometre Stone Reinforced cement concrete M15grade kilometre stone of standard design as per IRC:8-1980, fixing in position including painting and printing etc 5th kilometre stone (precast)
47djtwuk e.Mkojk jksM ds fdeh0 3@800 ¼lkyfj;k pkSjkgs½ ls HkS#iqjk cjM rdA
48dqy
49Kilometre Stone Reinforced cement concrete M15grade kilometre stone of standard design as per IRC:8-1980, fixing in position including painting and printing etc Hectometer stone (precast)
50djtwuk e.Mkojk jksM ds fdeh0 3@800 ¼lkyfj;k pkSjkgs½ ls HkS#iqjk cjM rdA
51dqy
52Road Marking with Hot Applied Thermoplastic Compound with Reflectorising Glass Beads on Bituminous Surface Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35 .The finished surface to be level, uniform and free from streaks and holes.
53djtwuk e.Mkojk jksM ds fdeh0 3@800 ¼lkyfj;k pkSjkgs½ ls HkS#iqjk cjM rdA
54dqy
55Providing and laying Reinforced cement concrete pipes NP-3 for culverts including jointing ends and fixing collar with cement mortar 1:2. (MoRTH specification : clause 1000/2900). 300 mm dia
56djtwuk e.Mkojk jksM ds fdeh0 3@800 ¼lkyfj;k pkSjkgs½ ls HkS#iqjk cjM rdA
57dqy
58Earthwork in excavation for foundation of structure complete with all lift, dewatering, shoring and shuttering etc. including refilling of trenches in 250 mm layer, ramming, watering and disposal of surplus soil within a lead of 1000 meters, as per drawing and technical Earth in excavation for foundation of specification. [MoRTH Specification : Clause 304]. In ordinary soil [MoRTH Specification : clause 301]BY MECHANICAL MEANS Depth upto 3m
59djtwuk e.Mkojk jksM ds fdeh0 3@800 ¼lkyfj;k pkSjkgs½ ls HkS#iqjk cjM rdA
60dqy
61Providing & laying mechanically mixed and vibrated Cement Concrete in foundation upto a depth of 1.5mtr, below ground level and 1.5mtr. above ground/bed level. [MoRTH Specification : Clause 1000/1700]. (a) Cement concrete 1:3:6 mix with crushed stone aggregate 20 mm nominal size.
62djtwuk e.Mkojk jksM ds fdeh0 3@800 ¼lkyfj;k pkSjkgs½ ls HkS#iqjk cjM rdA
63dqy
64Structural cement concrete for plain concrete/ reinforced concrete for substructure at any level, complete as per drawing and technical specification. Design mix concrete – [MoRTH Specification : Section 1500 & 1700]. RCC M-20 grade, including form work Upto 5 mtr. height
65djtwuk e.Mkojk jksM ds fdeh0 3@800 ¼lkyfj;k pkSjkgs½ ls HkS#iqjk cjM rdA
66dqy
67Providing and laying steel reinforcement at any level in foundation complete as per drawing and technical specification. [MoRTH Specification : Section 1600]. HYSD bar reinforcement
68djtwuk e.Mkojk jksM ds fdeh0 3@800 ¼lkyfj;k pkSjkgs½ ls HkS#iqjk cjM rdA
69dqy
70Structural cement concrete (Design Mix) in open foundations, with form work, at any level. Cement concrete for plain/reinforced concrete in open foundations as per drawing and technical specification. [MoRTH Specification : Section 1700 & 1500]. With 20mm nominal size aggregate P.C.C.M-15 grade
71djtwuk e.Mkojk jksM ds fdeh0 3@800 ¼lkyfj;k pkSjkgs½ ls HkS#iqjk cjM rdA
72dqy
73Structural cement concrete (Design Mix) in open foundations, with form work, at any level. Cement concrete for plain/reinforced concrete in open foundations as per drawing and technical specification. [MoRTH Specification : Section 1700 & 1500]. With 20mm nominal size aggregate R.C.C.M-20 grade With Batching Plant, Transit Mixer and Conrete Pump
74djtwuk e.Mkojk jksM ds fdeh0 3@800 ¼lkyfj;k pkSjkgs½ ls HkS#iqjk cjM rdA
75dqy
76Providing and laying Reinforced cement concrete pipes NP-3 for culverts including jointing ends and fixing collar with cement mortar 1:2. (MoRTH specification : clause 1000/2900). 1000 mm dia
77djtwuk e.Mkojk jksM ds fdeh0 3@800 ¼lkyfj;k pkSjkgs½ ls HkS#iqjk cjM rdA
78dqy

AI Tender Summary

OUR REF NO 38124050
AUTHORITY Government Departments
TENDER VALUE 2.03 Crore
LAST DATE 12-06-2023
Authority
Authority Name Public Works Department
Work Description Tender For Construction Work Of Non-Patchable /Missing Link Road And Road From Jhunwasa Head (Badunda) To Aibra (6.5 Km.) (Bundi) Under The Block Offices Under Circle Bundi.
Basic Detail
Tender No SE PWD CIRCLE BUNDI NITNO-05-2023-24
Bidding Type Tender
Location
City bundi
State Rajasthan
Key Dates
Publish Date 10 Jun 2023
Submission Date 12 Jun 2023
Open Date 13 Jun 2023
Finance
Tender Value 2.03 Crore
Tender Fee 2000
EMD 4.07 Lakhs
Exemption Not Available
Document List
3c70153d-4744-4bb3-a18b-0f8aeb7caa8a.html
BOQ_607401.xls
Tendernotice_1.pdf
Tendernotice_2.pdf
Tendernotice_3.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Jun 10, 2023
11:30 IST

Tender Published

Tender notice published.

Completed
Jun 12, 2023
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Completed
Jun 13, 2023

Bid Opening Date

Technical bids will be opened and evaluated.

Completed

Tender Documents

Download All (ZIP) ↓
html

3c70153d-4744-4bb3-a18b-0f8aeb7caa8a.html

xls

BOQ_607401.xls

pdf

Tendernotice_1.pdf

pdf

Tendernotice_2.pdf

pdf

Tendernotice_3.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender

TenderDetail
Loading tenders