|
| 1 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular type switch, phenolic laminated sheet, suitable size G.I. box andearthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required.Wire- Havells/Anchor/ABB |
| 2 | Group C |
| 3 | Wiring in existing conduit: Supply and drawing following sizes of FR LS PVC insulated copper conductor, single core cable in existing surface/ recessed steel/ PVC conduit as requried .Wire- Havells/Anchor/ABB |
| 4 | 2 x 1.5 sq.mm |
| 5 | 2 x 2.5 sq.mm |
| 6 | 2 x 4.0 sq.mm |
| 7 | 2 x 6.0 sq.mm |
| 8 | 4 x 10.0 sq.mm |
| 9 | Supplying and fixing 3 pin, 5 amp ceiling rose on the existing junction box/ wooden block including connection etc as required. Makes- Havells/Anchor/ABB |
| 10 | Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. Make - Anchor/Equivalent (2mm thick) |
| 11 | 20 mm(2mm thick) |
| 12 | 25 mm(2mm thick) |
| 13 | Supplying and fixing following sizes of Modules, GI Box with Modular base and Cover platefor modular switches in recesess etc as required.Makes- Havells/Anchor/Carbtree |
| 14 | 1 or 2 Module ( 75 x 75 MM ) |
| 15 | 4 Module ( 125 mm x 75 mm) |
| 16 | 6 Module ( 200 mm x 75 mm ) |
| 17 | Supplying and fixing following Modular type switch/ socket on the existing Switch box/ cover including connections etc. as required. Makes- Havells/Anchor/Carbtree |
| 18 | 5/6 amps switch |
| 19 | 15/16 amps switch |
| 20 | 3 pin 5/6 amps socket outlet |
| 21 | 6 pin15/16 amps socket outlet |
| 22 | Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 volts, on surface/recess, complete with tinned copper bus bar, neutral bus bar,earth bar, din bar, interconnections, powder painted includingearthing etc. as required. (But without MCB/RCCB/Isolator). Makes- Havells/ABB/Schnider |
| 23 | 4 Way (4+12) Double Door |
| 24 | Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, “C”curve, miniature circuit breaker suitable for inductive load offollowing poles in the existing MCB DB complete with connections,testing and commissioning etc. as required.Makes- Havells/Anchor/Schinder/Indo |
| 25 | Single pole |
| 26 | Single pole and neutral |
| 27 | Double pole |
| 28 | Earthing with copper earth plate 600 mm X 600 mm X 3 mm thickincluding accessories, and providing masonry enclosure with coverplate having locking arrangement and watering pipe of 2.7 metrelong etc. with charcoal/ coke and salt as required. |
| 29 | Supplying and laying 25 mm X 5 mm copper strip at 0.50 metrebelow ground as strip earth electrode, including connection/terminating with nut, bolt, spring, washer etc. as required. (Jointingshall be done by overlapping and with 2 sets of brass nut bolt &spring washer spaced at 50mm) |
| 30 | Supplying and fixing of 63 amps MCB,TPN.Makes-Havells/Anchor/Schinder/Indo |
| 31 | Supplying and fixing of 4 feet LED light 20 watt.Havells/Wipro/Bajaj |
| 32 | Supply and fixing of Ceiling Fan 48 inch , double ball bearing ,5 star energy rating, (Ivory/Brown colour). Makes- Havells/Crompton/Usha/Khaitan |
| 33 | Supply of 3.5 X 35 sq.mm XLPE Cable,A2XFY .Makes- Havells/ABB/KEI/Shalimar |
| 34 | Supplying and drawing of UTP 4 pair CAT 6 LAN CableSinglr runin theexisting surface/ recessed steel/ PVC conduit as required. Make- Havells/Schinder |
| 35 | Supplying, installation, commissioning and testing of 200 amps outdoor LT panel with 16 SWG MS Sheet. The panel should be dust free with proper rubber gaskets. The panel should be floor mounted with BUS Bar chamber, Earthing point, interconnections with Copper wiring. The panel should be coated with 2 coats of enamel paint( Grey Shade) with designation of incoming and outgoing feeder as per detail below: A. Incoming MCCB 100 amps 4 pole, 25 K ( 1 no),outgoing 63 amps MCCB 4 pole, 25 K ( 2 nos),with indicators with AE make Ammeters and Voltmers with end terminations. Make of MCCBS should be L&T/Siemens only |
