Military Engineer Services-MES has published Tender For Certain Repair To Flooring/ Tiling, Ceiling, Roof, Sanitary Fitting, Panelling, Joinery, Plumbing Work Etc At Sig Regt Under Age(I) Cif (R). Submission Date for this Tender is 11-07-2023. Civil Work Tenders in Rajouri Jammu And Kashmir. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 17-Jun-2023 | Revision of BOQ | BOQ | 04-07-2023 |
| 2 | 04-Jul-2023 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 11-07-2023 |
| Sl. No. | Item Description |
| 1 | Demolition of cement concrete (unreinforced) in ground floors and pavings n.exc 15cm thickness (below or above ground level) incl any types of tiles, complete all as specified and directed by engineer-in-charge. |
| 2 | Dismantling plain or corrugated steel sheeting, any gauge, thickness in roof covering and removing from site of work complete all as specified and directed. |
| 3 | Dismantling of wall and ceiling boards of any thickness incl cover fillets etc complete all as specified and directed. |
| 4 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed by engr-in-charge. |
| 5 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and removing serviceable tiles to store and rubbish off the premises complete all as directed. |
| 6 | 25 mm thick cement concrete 1:2:4 type B-1, (using 20 mm graded crushed stone aggregate) as in sub base of floor surface finished even and fair to receive top layer all as specified. |
| 7 | M&L forNon - skidceramiccoloured tiles7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement including15mm thick screed bed in cement mortar 1:4 complete all as specified and directed by engineer-in-charge. |
| 8 | M&L for glazed ceramic coloured designer tiles 450 x 300x 7 mm thick as in Vertical surfaces set and jointed in neat cement slurry and jointed or coloured cement to match etc complete over 15 mm thick rendering in CM 1:4all as specified and directed. |
| 9 | M&L for premium quality Vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm in floors etc. set and jointed in neat cement slurry @ 3.00 kg/Sqm and pointed in white or coloured cement to match, laid over 15mm thick screed in CM 1:6 complete all as specified and directed by engr-in-charge. |
| 10 | M&L for premium quality Vitrified coloured ceramic tiles 10 mm thick (square/ rectangular) polished as in vertical surface i.e skirting, dadoes etc, set and jointed in neat cement slurry @ 3.00 kg/Sqm and pointed in white or coloured cement to match, laid over 10mm thick rendering in CM 1:4 complete all as specified and directed by engr-in-charge. |
| 11 | Taking down cement plaster on brick wallor concretesurfaces of ceilling etc incl racking out joints hacking for key scrubbing down with water etc. complete allas spd & directed. |
| 12 | M&L for rendering 15mm thick on fair faces of brick or concrete surfaces in cement mortar 1:4 on walls finished even and smooth complete all as specified and directed by engr-in-charge. |
| 13 | M&L for preparation of new plastered surfaces and applying two coats of cement base paint on walls complete all as specified and directed by Engineer-in-charge. |
| 14 | S&F Prepainted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified. |
| 15 | S&F Prepainted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified. |
| 16 | S&F Hand rails, half round or other stock section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts;posts and struts in fencing including cutting tops to shape as directed, drilling holes,notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed. |
| 17 | S&F in position suspended false ceiling system using E-grid suspended ceiling grid system. The size of grid shall be 600 x 600mm with GI frame work main runner 38 x 24mm cross tee 25 x 24mm and wall angle 24x24mm, using 4 mm thick ceiling panel laminated with PVC film on front face and foil back availabel in due drop texture as per IS-2095, part-I-1996, fixid in the grid of E-grid suspended ceiling grid system duly suspended by 4mm dia GI bar hanger from the purlins of the roof with butter fly clips all as directed and as approved by Engr in Chargeand dismantling wall and ceiling board (fibre, pulp, insulation etc) or insulation boards/slabs/blankets any thickness including fillets,Complete all as specified and directed by Engineer-in Charge. |
| 18 | S&F 500 litres Capacity Rotational moulded polyethlene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I and 15 mm bore ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed including all accessories and dismantling of old water storage tank, complete all as specified and directed. |
| 19 | S&F in repair vitreous china wash hand basin white of bowl size 550x400mm including waste coupling and waste pipe PVC 32mm dia to be fixed over mild steel bracket complete all as specified and directed. |
| 20 | S & F in repair, Vitreous china one piece EWCwith slim soft close seat cover size 715x335x715mm straight -line design square blow concealed "S" trap for batter aesthetics, snow white colour,including fixing with screw/bolts fixed in repairs, complete all as specified and directed. Make:-CERA Cat. No.S1013209 or equivalent cat part of make as specified in list of make here-in-after. |
| 21 | Supply and fix in repair Vitreous China squatting pan orissa pattern size 580 x 440 mm white with integral foot rests including connection to trap and to flushing pipe,complete all as specified & directed. |
| 22 | S&F low level 10 ltrs capacity PVC valveless symphonic action type flusing cistern low level white with inlet ball valve float ovel handle including 32mm dia PVC flushing pipe complete all as specified and directed by Engr-in-Charge. |
| 23 | Taking up or down Steel Tubing bore of pipe in 15mm and connections, including cleaning for refixing or removal to store etc complete all as specified and directed. |
| 24 | Taking up or down Steel Tubing bore of pipe in 20mm and connections, including cleaning for refixing or removal to store etc complete all as specified and directed. |
| 25 | M&L for Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth in brick masonry, complete all as specified. |
| 26 | Refixing old 15mm bore of steel tubing and connections in new or old position (Walls, ceiling, floors, etc.), complete all as specified and directed. |
| 27 | Refixing old 20mm bore of steel tubing and connections in new or old position (Walls, ceiling, floors, etc.), complete all as specified and directed. |
| 28 | S&F Steel Tubes Medium Grade Bore of tube in 15mm galavanised with all fitting laid in trenches, walls, ceiling or laid in floors etc complete all as specified and directed. |
| 29 | S&F Steel Tubes Medium Grade Bore of tube in 20mm galavanised with all fitting laid in trenches, walls, ceiling or laid in floors etc complete all as specified and directed. |
| 30 | S&F in repair bib taps, fancy type, chromium plated, cast copper aloy ISI marked with crutch or butter fly handle high pressure screwed down for iron pipe of 15mm bore complete all as specified and directed by Engr-in-Charge. |
| 31 | Supply and fix in CP stop cock/angle valve fancy type cast copper alloyscrewed down high pressure ,with crutch or butterflyhandle screwed both ends for iron pipe or for union of 15 mm borecomplete all as spd & directed |
| 32 | S&F in repairs stop valve, cast copper alloy ISI marked screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions of 20 mm bore completeall as specified. |
| 33 | S&F in repairs stop valve, cast copper alloy ISI marked screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions of 15 mm bore completeall as specified. |
| 34 | S&F in repairs 15mm bore angle valve chromium plated screwed downfancy typehigh pressure screwd both ends for iron pipe of 15mm bore complete all as specified and directed by Engineer-in-Charge. |
| 35 | S&F in repair brass chromium plated shower rose 125mm size with or without swivel joints, including fixing to steel pipe or union complete all as specified and directed. |
| 36 | S&F in repair PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed. |
| 37 | Mild steel chromium plated grating 100 mm diawith or without circular hole for inserting waste pipe fixed as in repair complete all as specified and directed. |
| 38 | 15 mm bore CP jet spray all as specified and directed by Engineer-in-Charge. |
| 39 | S&F in repair centre hole basin mixture valve, cast copper alloy fancy type 15mm brass chromium plated mixer (central hole basin mixer w/o pop up waste system) for mixing hot & cold water screwed down for iron pipe , complete all as specified. |
| 40 | S&F for 110mm bore, PVC (SWR) rain water drainage pipes single socketed in any length with rubber ring joints fixed towalls complete all as specified. |
| 41 | M&L 110mm PVC Branch pieces, double (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches as in repairs complete all as specified. |
| 42 | M&L 75mm PVC Branch pieces, double (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches as in repairs complete all as specified. |
| 43 | S&F in repair 75mm PVC Bends (any radius),complete all as specified and directed. |
| 44 | M&L in repairs 75mm PVC floor trap, with grating including jointing to waste pipe fixed in cement type B-1 1: 2:4and making good wall or floor tiling to match existing surface,complete all as specified and directed. |
| 45 | S & F in repair 8mm thick looking mirror of size 1.00 Mtr X 0.9 Mtr of selected quality glass mounted on 8mm thick AC building board or commercial plywood and aluminium angle beading around mirrior fixed onwall PVC plug and screwsetc complete allas specified and directed |
| 46 | Taking down chowkats or frameswith shutters(without taking offshutters from frames) area exceeding 1.50 square metre andnot exceeding 4 square metre each, including cutting holes for taking out existinghold fasts and making good the disturbed portion of jambs and adjoining surface to match with existing finish and removal, complete all as specified and directed. Note: PCC for fixing hold fast shall be measured and paid separately |
| 47 | Taking down chowkhat or frame with shutter (without taking off shutter from the frame) n exc. 1.50 Sqm each incl taking out hold fast, complete all as specified and directed. |
| 48 | S & F 35 mm thick second class hard wood factory made plain, framed, panelled shutters (two numbers of panels) with lock rail and panel of 9 mm BWP commercials ply or 12 mm veneered particle board on both faces.The size of rails and size as per IS:1003 (Part-I), Kiln seasoned & chemically pressure treated, complete all as specified and directed. |
| 49 | S & F 35 mm thick second class hard wood factory made glazed and skelton shutters, open rebated and prepared to receive glass, gauge, etc. (without sash bars), edges of framing plain, chamered or rounded, fitted with cut and mitred beads for securing glass, etc.Size of memebers of shutters as specified in SSR Part-I 2009, Section 8, clause 8.24 (a) for doors, complete all as specified and directed |
| 50 | Solid PVC door frames of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M S square tube, suppling and fixing in opening as per specification and drawing as per SSR Pt-II 2020, complete all as specified and directed. |
| 51 | Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification clause No 8B.1 to 8B.10 and drawing on page No 176 of MES SSR-2020 Part-II. |
| 52 | S & F 200 mm aluminium anodised barrel tower bolt of extruded section and fixed,complete all as specified and directed. |
| 53 | S&F aluminium alloy, sliding door bolt 300 mm long with hasp, staple ( bolt type) and fixing clips of sheets, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed, all as specified. |
| 54 | S & F 100 mm long butt hinges, medium wight cold rolled mild steel, complete all as specified and directed. |
| 55 | S & F 150 mm extruded aluminium alloy handles, fabricated type, anodisedand, complete all as specified and directed. |
| 56 | Deduction to be made from BOQ for schedule of credit (Sch "A" Part - II) Amount of ? 9,367.50during AOC Note:- Tenderers shall not quote for this Schedule |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
