Tender For Centrifugal Machine Repair Work, Udam Singh Nagar-Uttarakhand

Tender For Centrifugal Machine Repair Work-Crack Shaft Of Batch Type Self Discharge Centrifugal Machine Make And Fit New Shaft In Place According To Bearing Size. 2 S. D. General Diameter Of Shaft Of Batch Type Centrifugal Machine Make According To Bearings. Dc. - 10 / 34 By Repairing Shaft Of Centrifugal Machine Making According To Bearing Size. D.C. - 10 / 34 Slipped Chowging Of Centrifugal Machine Page Correcting Bolts. D.C. - 10 / 34 New Collar Of The Basket Of The Centrifugal Couple Machine Fitting, M. Sealing In The Press Hub. In The Lower Centrifugal Basket 3 Mm. Thick New Ss Top Ring 5 6 Make And Apply! 1. Sc- 1100 K. T. / 30, 2. Sc 1100 K. T. / 34. 3. D.C. 10 / 34 4. N. Of. 1100 / 30° 5. Sc. 1350 K. T. / 30 The New S In The Lower Centrifugal Basket. S. Making Molasses Guard And Applying It. 7 1. Sc- 1100 K. T. / 30, 2. Sc 1100 K. T. / 34. 3. D.C. 10 / 34 4. N. Of. 1100 / 30° 9 10 5. S. C. 1350 K. T. / 30° Sc 1350 K. Replacing The Crack Distribution Plate Of T. / 30 Continuous Centrifugal Machine By Making A New Plate. Sc 1350 K. Supporting New Ss In T. 30 Basket , Form Fit Liner 4 Mesh X 16 Swg ( As Per Oem Specification ) Connecting The Supporting Liner Over The Basket Of Continuous Centrifugal Machine. Key Rib Fit Without Joint. ( 20 Mm Width And 03 Mm Thickness ) 1. Sc- 1100 K. T. / 30, 2. Sc 1100 K. T. / 34. 3. D.C. 10 / 34 4. N. Of. 1100 / 30° 5. S. C. 1350 K. T. / 30° New Shaft Of The Following Centrifugal Machine From En-24 Material Make And Give 1.S. C. - 1100 / 30 Page 2 2. Sc 1100 K. T. 34 3. D.C. 10 / 34 4. N. Of. 1100 / 30° 5. S. C. 1350 K. T. / 30 ° 6. D. - 112 Centrifugal Machine 12 D.- 412 Balancing Centrifugal Machine With Basket With Hood. Making Baskets Of Batch Type Self Discharge Centrifugal Machine. Balancing 13 To Do The Following Continuous Centrifugal Machine With Basket Balancing With Distributor. 1. Sc- 1100 K. T. / 30 2. Sc 1100 K. T. / 34 3. डी०सी० 10 / 34 4. N.K. 1100 / 30° 5. S. C. 1350 K. T. / 30° Balancing Of Motor And Pulley Of Continuous Centripule Machine 15 Doing. 16 Balancing Of Distributor Of Continuous Centrifugal Couple Machine. S. D. Balancing Of Centrifugal Machine With Basket With Hood. 17 18 S. D. Balancing The Hood Of Centrifugal Machines. Functions Of Nk 1100 / 30° Nhec Make Centrifugal Machine ( A ) Strengthening With Necessary Repairs By Re-Leveling The Base Structure Of The Machine ( B ) Driven And Driver Shaft Of The Machine. Parallelity And Checking Both Pulls Ecentricly And To Be True ( C ) Damaged Molasses Diffuser Casing And Bearing Of The Machine. Necessary Repairs To The Base Plate Of The Housing. D ) After Repair Of Distributor And Basket, Dynamic Balancing Is Done To Give Success At The Site. D.- 412 Completely Clean The Plaque ( Rough ) Of The Centrifugal Machine Repair And Give Trial In Site. Nk Supply Of Monitor Casing Of 1100 / 30 Centrifugal Machine 19 20 21 Replacing The Base Plate Of The Following Centrifugal Machine Which Is Inside The Monitor Casing. 1.S. C. 1100 / 30 2. S.C. 1100 K.T. / 34.

INR 590 /-

Refer document