Tender For Tiruvannamalai Municipality - 9.Desilting Of Open Well And Providing Water Supply Arrangements At Maniyari Street
Tender Value
2.50 Lakhs
Estimated cost
Bid Submission
15 Jun 2023
0 days left
EMD
2500
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
thiruvannamalai → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tiruvannamalai Municipality - 9.Desilting Of Open Well And Providing Water Supply Arrangements At Maniyari Street 9. Desilting Of Open Well And Providing Water Supply Arrangements At Maniyari Street
BOQ
| Sl. No. | Item Description |
| 1 | Dewatering using 3HP diesel engine pumpset including Hire charges, cost of Diesel, Engine oil, pump operator, labour charges, conveyance of pumpset and fuel to site and back, loading, unloading and any other incidental charges etc., complete. |
| 2 | Desilting light or sandysoil or silt from infiltration wells below water level including the charges for special T&P and air compressor etc. complete. |
| 3 | Disposal of surplus earth including loading and conveyance within a distance of 5 km (basic cost of earth is zero) including loading charges and Conveyance Charges of 5 kms distance. |
| 4 | Supply and fixing of following materials including cost and conveyance etc., complete. - 32 mm dia PVC Pipe |
| 5 | 50 mm dia HDPE PIPES FOR SUB-MERSIBLE PUMP IN BORE WELL Class-5 |
| 6 | 32 mm dia PVC Bend |
| 7 | 32mm dia PVC Coupling |
| 8 | 32mm dia UPVC Ball valve |
| 9 | Nylon Rope for Bore-well |
| 10 | 40mm Clamp Set |
| 11 | Supply and delivery of Open well Submersible pump set conforming to IS 14220 /2002 and as amended thereafter and BEE 3 Star Rated capable of discharging the following duties due to all causes. The pump shall be with stainless steel shaft and dynamically balanced bronze mixed type impeller, CI FG 200 grade casing and brass screws and rotor shall be of copper rod as per IS 613/1984 with ISI mark. The pump suitable for installation in sump with 1.1KV grade 3 core suitable copper flat submersible cable to a length of 15m with necessary cable joints. The non-return valve located at the top of the pump in the discharge outlet connection is to be designed with minimum friction. The pump should be directly coupled to 2880 RPM, three phase, 50 Hz (±5), 415V+6% & 415V-15% squirrel cage induction motor suitable for DOL upto 5 HP, Fully Automatic Air break Star Delta up to 20 HP and Auto Transformer starter for above 20 HP starting and for continuous operation. (50 LPM X 25m Head) |
| 12 | Supply and delivery of 2.50 Sq.mm copper submersible PVC insulated and sheathed 3 core plate type confirming To IS 694/77 with ISI Mark. |
| 13 | SINGLE PHASE PANEL BOARD WITH TWO LEVEL GUARD AND AUTO STARTSupply and delivery of direct online starter confirming to IS13947, IEC60947-1 and as amended thereafter with suitable KW rating for operation in AC/single Phase/50HZ(± 5%) and 230 V(±10%) including Ammeter, Voltmeter, Thermal Overload relay, 16 Amps 2 pole Magnetic Contactor with under Voltage protection, Indication lamp, starting capacitor, running capacitor and On/Off Push button switches, 5 way connector, wiring with 1 sq. mm/1.5 sq. mm copper PVC insulated cable, powder coated vermin proof box including the capacitor (the cost of capacitor is to be taken separately). 1 HP Panel board (TWAD SOR 2021-22, P.109) |
| 14 | Supply and run of 2 of 6 sq.mm. (84 / 0.3) PVC insulated single core unsheathed copper conductor of 1100V on 7 / 20 GI bearer wire for service connection mains7/20 copper wire (SD.66) |
| 15 | Labour charges for the erection of submersible pumpset in borewell/openwell including fixing and jointing submersible cable with proper clamps upto the starter to required depth and also fixing of riser pipes to the required depth valves erection clamps, pressure gauges upto the exterior wall of pump room and erection of panel board consisting of TPICN switches starter, Voltmeter, Ammeter, three pilot (indicating) lamps capacitor single phasing preventor, water level guard and laying and jointing the cables and twin earthing as per IE rules etc., complete and testing the pumpset and trail run for 10 days. |
| 16 | Construction of mini tank bottom platform with brick work (with approved chamber class II bricks of size 9\" x4 3/8\" x23/4\" in CM 1:5 and plastered with CM 1:5, 12mm thick outside as per type design with foundation concrete 20mm thick in CM 1:4:8 using 40mm HBG, as directed by the Engineer in -charge. The rate shall include earthwork, gravel filling, palstering and painting complete as per standard specification and directed by the Department Engineer. |
| 17 | Supply and delivery and fixing of HDPE tank as per IS 12701/1996 including loading, unloading, transportation and labour charges for fixing of the GI pipes and specials for pipe connection works including cutting, threading and fixing charges etc.,(1000 Litres capacity) |
| 18 | Supply and fixing of TNEB meter Board suitable for 32A Single Phase service connection with 32A Fuse unit (500V) 32A neutral link and earth link (1\" x 1/8\" Copper flat) on TW plank of size 375mm x 300mm x 19mm with supporting TW reepers of 1\" thick an either side with painting with suitable bolt and nuts for fixing the TW plank on wall with earth connection and inter connection with 7/20 PVC insulated copper wire from EB meter to fuse unit.sd 125 |
| 19 | Supply and delivery of MS KIOSK of size 0.75 x 0.45 x 0.75m made up MS angle of size 50mm x 50mm x 3mm alround coverd with 18 gauge MS up of MS plates of size 25mm x 3mm including cutting Welding Grinding, Locking arrangements and Labour charges etc., complete for fixing of meter board.Switch board with MS door and lock and key arrangements (Page No:83) |
| 20 | Earthing as per P.W.D standard with an earth electrode of 2mtr . Class \"B\" GI Pipe of a dia not less then 32mm complete with necessary masonry work. (PWD Ele.Data-Sl.No-234) SD234 |
| 21 | Painting two coats of newly plastered wall surface with ready mixed Cement paint of first quality and of approved colour over a priming coat including preparing the surface, clean removal of dirt and including necessary plaster of paris putty wherever required etc., complete complying with standard specification. |
| 22 | Plastering with cement mortar 1:5 (One part of Cement and Five part of Plastering Sand (P- Sand)) 12mm, thick in all floors including cost and conveyance of all materilas to site and labour charges etc,complete as per standard specifications |
| 23 | Supply and fixing of M.S Grills with Doors and Windows with one coat of Red oxide with Primer including all costs such as welding,grinding and fabrication charges, cost and conveyance of all materials to site etc,complete as per standard specification. |
| 24 | Plain cement concrete 1:2:4 mix (one cement two sand and four aggregate) using 20mm HBG metal including cost and conveyance of all materials and all labour charges etc,.complete complying with standard specification |
AI Tender Summary
Tender Timeline
Jun 10, 2023
11:30 IST
Tender Published
Tender notice published.
CompletedJun 15, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJun 15, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender