Military Engineer Services-MES has published Tender For Provn Of Security Fencing With Accessories For Nfs Node And Special Repair Of Perimeter Security Wall With Allied Infra Under Station Hq Trehgam. Submission Date for this Tender is 30-06-2023. Wire Fencing Tenders in kupwara Jammu And Kashmir. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | BR Portion |
| 2 | Demolition of brick/stone masonry work built in cement mortar. |
| 3 | Demolition of Reinforced Cement Concrete (reinforcement cut as required to facilitate demolition) in ground floors and pavings n.exc 15cm thickness (below or above ground level) complete all as specified and directed. |
| 4 | Mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips, all as specified. |
| 5 | Mild steel TMT bars 8mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips as in stirrups complete all as specified and directed. |
| 6 | M&L RCC type B1 1:2:4(20 mm graded aggregate) as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed. |
| 7 | M&L RCC type B1 1:2:4(20 mm graded aggregate) as in Columns,pillars,piers, posts and struts complete all as specified and directed. |
| 8 | M&L RCC type B1 1:2:4(20 mm graded aggregate) Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed. |
| 9 | M&L Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified and directed. |
| 10 | M&L Formwork to sides of pillars, posts, struts, piers,columns and stanchion Square, rectangular or polygonal complete all as specified and directed. |
| 11 | M&L Formwork to edges of concrete flats, breaks in floors, openings in concrete walls, floors and roofs and sides of RCC/PCC bands in walls, horizontal or sloping, and similar work all exceeding 20cm wide.complete all as specified and directed. |
| 12 | Providing cement concrete 1:2:4 (using 20 mm graded aggregate ) in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering,slightly rounded or chamfered angles and throating, as directed. |
| 13 | Brick work sub class "B" bricks, straight or curved on plan exceeding 6 metre mean radius, built in cement, mortar 1:4, all as specified. |
| 14 | Taking down cement plaster, any description on stone or brick wall including racking out joints, hacking for key, scrubbing down with water etc.complete all as specified and directed. |
| 15 | Rendering 15mm thick over brick/Stonesurface in cement mortar 1:4 and finishing surface even and smooth without using extra cement.complete all as specified and directed. |
| 16 | M&L Two Coats of cement base paint with priming on plastered and other surfaces with alkali resistant priming paint newly plastered surface including preparation complete all as specified and directed. |
| 17 | Dismantling cast iron work of any description. |
| 18 | Mild steel work as in post and struts in fencing including cutting tops to shape as directed, drilling holes notching for wire etc. conforming to Fe 410 or Fe 310 complete all as specified and directed. |
| 19 | S & F Galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2 mm dia barbs at 75mm spacing and straining and fixing to any of standardrails. Section etc, fixed in repair complete all as specified and directed by Engr In Charge |
| 20 | Restraining and resecuring including making good staples etc. galvanised 2 strand steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacing and straining and fixing and straining rails and straining bolts including securing or tying at crossing with and provision of galvanised mild steel wire stapplesor steel pins etc. as directed and all as specified (Each line wire to be measured). |
| 21 | M&L for two coat of cement base paint including preparation of old plastered surface of wall complete all as specified and directed. |
| 22 | Prepartion of steel and iron surfaces exceeding 10 cm width or girth and applying two coats of synthetic enamal point over one coat of red oxide zinc chrome primer complete, all as specified. |
| 23 | Prepartion of old steel and iron surfaces exceeding 10 cm width or girth and applying one coats of synthetic enamal point, all as specified. |
| 24 | S& F Punched tape concertina coil (Including spike and handle) with 50 turn and dia 600mm , max covered length 10 RM, having a core wire of high carbon spring steel of high tensile strength. The punched tape and core wire (2.6+0.035mm dia) are electrogalvanized to provide against outdoor exposure. The punched tape is mechanically creamed over the core wire and the formed into a coilat various parts of the periphery of the coil, steel clips toal 129 Nos per coil spaced to connect the individual turn of the coil to each other so that it open up like an accodian . The width of strip as per 19mm and spacing of blades 24.00 +5%mm C/c. The weight of each coil will be 15.2 +5% Kgs without packing material and coil length 15 Mtr when opened up with a effective height915 mm each coil wound with an bituminized hessian cloth for providing packing complete all as specified and directed by Engr-in-Charge. |
| 25 | Restraining and resecuring including making good staples etc, Punched tape concertina coil (Including spike and handle) with 50 turn and dia 600mm , max covered length 10 RM, having a core wire of high carbon spring steel of high tensile strength. The punched tape and core wire (2.6+0.035mm dia) are electrogalvanized to provide against outdoor exposure. The punched tape is mechanically creamed over the core wire and the formed into a coilat various parts of the periphery of the coil, steel clips toal 129 Nos per coil spaced to connect the individual turn of the coil to each other so that it open up like an accodian . The width of strip as per 19mm and spacing of blades 24.00 +5%mm C/c. The weight of each coil will be 15.2 +5% Kgs without packing material and coil length 15 Mtr when opened up with a effective height 915 mm each coil wound with an bituminized hessian cloth complete all as specified and as directed. |
| 26 | Excavation in post holes each n. exc .50 cum, getting out in soft/loose soil and removing surplus material n. exc 50 mtr and making good disturb surfaces all as specified. |
| 27 | M& L PCC 1:3:6 type C-2 (using 40 mm graded aggregate ) as in foundation of posts and struts. |
| 28 | M & L 10 mm dia MS round bar for fixing of chain link fencing with post. |
| 29 | M & L for Flat Iron 40x6mm for fixing chain link fencing with RCC post and MS rounnd bar 10 mm dia for inserting in mesh including hooking etc complete. |
| 30 | S & F 10mm dia 40mm long MS screw bolt machine made with hexagonal or Square head at one end and screwedthe other,screwed end fixed with washer complete. |
| 31 | Supply only chain link fencing, galvinised mild steel of mesh 100x100mm size,10 gauge complete all as specified. |
| 32 | Fixing only chain link fencing, including line wires 100x100 mesh, 10 gauge galvinised mild steel to any type of standards, rails, straining bolts, etc. complete. |
| 33 | M&L two coats of synthetic enamel paint over redoxide n.exc 10 cm width/girth on steel surface including preparation of surface complete all as specified. |
| 34 | M & L two coats of black bituminous paint on new steel complete all as specified. |
| 35 | S & F Mild steel framed work such as grills, gratings, etc. with ends of barsshouldered and/or riveted,or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
