Tender For Improvement And Replacement Of G.I. Pipeline At Pinakinagar Under Sub Division No.Iii, Swadeshnagar, Nacd, Apwd, Mayabunder
Tender Value
38.30 Lakhs
Estimated cost
Bid Submission
20 Jun 2023
0 days left
EMD
76613
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
mayabunder → Andaman And Nicobar Islands
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Improvement And Replacement Of G.I. Pipeline At Pinakinagar Under Sub Division No.Iii, Swadeshnagar, Nacd, Apwd, Mayabunder
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. |
| 2 | All kinds of soil. |
| 3 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : |
| 4 | 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources: 4 graded stone aggregate 20 mm nominal size derived from natural sources). |
| 5 | 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources). |
| 6 | Centering and shuttering including strutting, propping etc. and removal of form work for : |
| 7 | Foundations, footings, bases for columns |
| 8 | Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. |
| 9 | Dismantling G.I. pipes (external work) including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means including stacking of pipes within 50 metres lead as per direction of Engineer-in-charge : |
| 10 | 15 mm to 40 mm nominal bore |
| 11 | Above 40 mm nominal bore |
| 12 | Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. External work |
| 13 | 40 mm dia nominal bore |
| 14 | 50 mm dia nominal bore |
| 15 | 65 mm dia nominal bore |
| 16 | Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete : |
| 17 | 25 to 40 mm nominal bore |
| 18 | 50 to 80 mm nominal bore |
| 19 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : |
| 20 | 40 mm nominal bore |
| 21 | 50 mm nominal bore |
| 22 | 65 mm nominal bore |
| 23 | Providing and laying S&S C.I. standard specials such as tees, bends, collars, tapers, caps etc. (Heavy class): |
| 24 | Up to 300 mm dia |
| 25 | Painting G.I. pipes and fittings with two coats of anti-corrosive bitumastic paint of approved quality : |
| 26 | 40 mm diameter pipe |
| 27 | 50 mm diameter pipe |
| 28 | 65 mm diameter pipe |
| 29 | Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work): |
| 30 | 40 mm nominal bore |
| 31 | 50 mm nominal bore |
| 32 | 65 mm nominal bore |
| 33 | Constructing CC Chamber 90x90x100 cm, inside with 75 class designation cement concrete in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100 mm. top diameter, 160 mm bottom diameter and 180 mm deep (inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) necessary excavation foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design : |
| 34 | Providing 6mm thick M.S. Sheet lid of size 0.85 x 0.85mm with priming coat including M.S. flat of size 50x6mm 2 Nos. diagonally and 4 Nos. around the M.S. sheet lid with M.S. angle 40x6mm thick 4 Nos. as required including applying priming coat with arrangement of lock and key standard brand godrej norathal etc. complete as per the direction of Engineer-in-charge. |
AI Tender Summary
Tender Timeline
Jun 09, 2023
11:30 IST
Tender Published
Tender notice published.
CompletedJun 20, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJun 21, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender