Military Engineer Services-MES has published Tender For Repair / Replacement Of Ply Wood Top In Wooden Bed, Table Bed Side, Sofa Set, Table Peg, Chair Writing, Chair Easy, Table Writing, Chair Dinning With Long Back And Other Connected Wooden Furniture For Officer Mess And Married Accn At Af St. Submission Date for this Tender is 06-07-2023. Wooden Furniture Tenders in manauri Uttar Pradesh. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 19-Jun-2023 | Corrigendum 1 | Other | 29-06-2023 |
| 2 | 19-Jun-2023 | Corrigendum | Other | 29-06-2023 |
| 3 | 29-Jun-2023 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 06-07-2023 |
| Sl. No. | Item Description |
| 1 | Bed plywood top- FD 246 Repair of Bed plywood top by removing of old unserviceable existing PLY from Bed plywood top & Supply and fixing 12 mm thick new ply wood Waterproof IS marked [National/Swastic/Centuary] with eight Nos nut & bolts over Bed plywood top & following fixing arrangement:- |
| 2 | Long rail made out of 1stclass hard wood shisham as per drawing complete all as specified & directed. |
| 3 | Ditto all as per item No 1.00 but front leg complete all as specified & directed. |
| 4 | Ditto all as per item No 1.00but rear leg complete all as specified & directed. |
| 5 | 4mm thick plywoodteakfacing one side other face commercial type1 quality BWR grade on both side and teak wood bedding all around of head rest of bed ply wood top fixed with head less nails of size 20mm 17 number complete all as specified and directed byEngineer-in-Charge. |
| 6 | Ditto- All as per item 1.00 above but for Foot rest. |
| 7 | Polishing with Hi-gloss French polish to match with the existing completeto the Bed plywood top including preparation of old wooden surface complete all as specified & directed by Engineer-in-Charge. |
| 8 | Chair Dining (FD-279-223) Re-Canning bottom as per size of bottom of chair dinning with new 2mm wide half round white plastic cane & Border Canning with 4mm wide plastic cane complete as per specification complete as specified & directed by Engineer-in-Charge. |
| 9 | Rear leg supply & fix as per drawing complete all as specified & directed. |
| 10 | Front leg as per drawing complete all as specified & directed. |
| 11 | Front /Back Rails as per drawing complete all as specified & directed. |
| 12 | Bottom stiffeners as per drawing complete all as specified & directed. |
| 13 | Polishing with Hi-gloss French polish to match with the existing completeto the Chair dining wooden including preparation of old wooden surface complete all as specified & directed. |
| 14 | Chair Writing M&L for replacement of damaged/ broken parts of chair writing with first class Shesham wood and fitted or readjusting as per Drg complete chair as specified & shown on Drg as directed by Engineer-in-Charge for the following :- Hand Rest complete all as specified & directed. |
| 15 | Front Leg as per drawing complete all as specified & directed. |
| 16 | Rearlegs complete all as specified & directed. |
| 17 | Front/back rails for seats complete all as specified & directed. |
| 18 | Bottom stiffeners complete all as specified & directed. |
| 19 | Re-Canning of chair CB With arms with new 2 mm thick half round white cane and Border canning with 4mm widecane complete including taking out old damaged cane carefully as specified & shown on drg complete all as specified & directed. |
| 20 | Polishing with Hi-gloss French polish to match with the existing completeto the Chair writingincluding preparation of old wooden surface complete all as specified & directed. |
| 21 | Chair Easy with Arms (FD-229) M&L in replacement of damaged / broken parts of chair easy with second class hard wood shisam and readjusting as per drg complete all as specified & directed. |
| 22 | Rear legs complete all as specified & directed. |
| 23 | Hand Rest complete all as specified & directed. |
| 24 | Side rails for Seat & back complete all as specified & directed. |
| 25 | Front & Back Rails complete all as specified & directed. |
| 26 | Bottom Stiffners complete all as specified & directed. |
| 27 | Re-Canning of Chair Easy with 2mm wide half round white plastic cane and border canning with 4mm wide plastic cane complete as per specification including taking out old cane complete as specified and shown on drawing complete all as specified & directed. |
| 28 | Polishing with Hi-gloss French polish to match with the existing completeto the Chair easyincluding preparation of old wooden surface complete all as specified & directed. |
| 29 | Chair Dinning with long back (FD-357) Taking out Unserveceable rear leg from chair dinning long back and Supply & Fixed new rear leg made of seasoned Shisham second classwood matching with existing shape & size complete all as specified & directed. |
| 30 | Taking out Unserveceable front leg from chair dinning long back and Supply & Fixed new front leg made of seasoned Shisham wood matching with existing shape & size complete all as specified & directed. |
| 31 | Taking out Unserveceable rear/ front/ side rail of chair dinning long back and Supply & Fixed new rear/ front/ side rail made of seasoned Shisham wood matching with existing shape & size complete all as specified & directed. |
| 32 | Taking out Unserveceable stiffeners from chair dinning long back and Supply & Fixed new stiffeners made of seasoned Shisham wood matching with existing shape & Size complete all as specified & directed. |
| 33 | Taking out Unserveceable seat from chair dinning long back and Supply & Fixed new seat from chair dinning made with 6mm thick ply wood with 50 mmthick cushion covered with black regsine matching with existing shape & size complete all as specified & directed. |
| 34 | Polishing with Hi-gloss French polish to match with the existing completeto chair dinning long backincluding preparation of old wooden surface complete all as specified & directed. |
| 35 | Table Dinning 6 person (FD-273 &269) Taking out unserveceable table top from table dinning6 person and supply & fix new table top made with18 mm thick MDF board one side teak face exterior BWR grade of Make: Archid/ Century/ Asisply or any Equivalent make as approved by Engineer-in-Charge including 4mm thick teak wood beading all around the top complete as shown in drg & directed by Engineer-in-Charge. |
| 36 | Taking out unserveceable/ damaged Legs S & F from table dinning and supply & fix new legs of table dinning made of seasoned Shisham wood matching with the existing shape & sizes including PVC or rubber shoe at the bottom of leg to match the existing complete as per drawing complete all as specified & directed. |
| 37 | Taking out unserveceable/ damaged front or back rails from table dinning 6/8 person and supply & fix new rails of table dinning 6/8 person made of seasoned Shisham wood to matching with the existing shape & sizes complete all as specified & directed. |
| 38 | Taking out unserveceable/ damaged side rails from table dinning 6/8 person and supply & fix new side rails of table dinning made of seasoned Shisham wood to matching with the existing shape & sizes complete all as specified & directed. |
| 39 | Polishing with Hi-gloss French polish to match with the existing completeto the table dinning 6/8 person wooden including preparation of old wooden surface complete all as specified & directed. |
| 40 | Table peg(FD – 236, 277 AND 25) Taking out Unserveceable top from table peg and Supply & Fixed new top made of pre-laminated particle board one side teak face Exterior grade BWR 18mm thick Make: Archid/Century/Asisply duly covered with 4mm thick teak wood beading with polishing all around the top complete all as shown in drg complete all as specified & directed. |
| 41 | Taking out Unserveceable leg from table peg and S&F new leg made of seasoned Shishamsecond class wood including rubber shoe at the bottom of legs fixed with steel screws matching with the existing shape & size complete all as specified & directed. |
| 42 | Taking out Unserveceable front/ back rails from table peg and Supply & Fixed new front/ back rails made of seasoned Shisham second class wood matching with existing shape & size, complete all as complete all as specified & directed. |
| 43 | Polishing with Hi-gloss French polish to match with the existing completeto the table peg including preparation of old wooden surface complete all as specified & directed. |
| 44 | Table bed side (FD – 276, 248 AND 28) Taking out Unserveceable back plywood from table bed side and Supply & Fixed new back made of 6mm thick commercial plywood Exterior grade BWR with polishing Make: Century /Kit ply or approved by Engineer-in-Charge complete as shown in drgs complete all as specified & directed. |
| 45 | Taking out Unserveceable shelves from table bed side and Supply & Fixed new shelves with steel handle made of 12mm thick pre-laminated particle board one side teak face Exterior grade BWR Make: Century/Kit Ply complete as shown in drg complete all as specified & directed. |
| 46 | Taking out Unserveceable sides from table bed side and Supply & Fixed new sides made of 18mm thick pre-laminated particle board one side teak face Exterior grade Make: Archid/ Century/ Asisply duly covered with 4mm thick teak wood beading matching with the existing shape & sizes complete all as specified & directed. |
| 47 | Taking out Unserveceable tops/ bottom from table bed side and S&F new tops/ bottom made of 18mm thick pre-laminated particle board one side teak face Exterior grade Make: Archid/ Century/ Asisply duly covered with 4mm thick teak wood beading matching with the existing shape & size, complete all as specified & directed. |
| 48 | Table writing with drawer [FD-249,275 & 33] Taking out Unserveceabletabke top from Table writing and Supply & fixed new table top made with 18 mm thick particle board exterior grade conforming to grade -1 & type III(PL MDF-13 Designation )as per IS 14587), One side teak face in Baverian beach shade and balancing white lamination on other side Make(as specified in particular specification )including 6 mm thick first class hard wood (MP Teak) edging all around the top complete as shown in drg complete all as specified & directed. |
| 49 | Taking out Unserveceable/ damaged legs from table writing and Supply & Fixed new leg made of seasoned Shisham wood matching with the existing shape & sizes complete all as specified & directed. |
| 50 | Taking out Unserveceable/ damaged front or back rails from table writing and Supply & Fixed new rails made of seasoned Shisham wood to matching with the existing shape & sizes complete all as specified & directed. |
| 51 | Taking out damaged centre stiffener from table writing and Supply & Fixed new centre stiffeners made of seasoned Shisham wood to matching with the existing shape & sizes complete all as specified & directed. |
| 52 | Taking out Unserveceable/ damaged Shutter from table writing and Supply & Fixed new Shutter made of 18 mm thick Pre-laminated particle board Exterior BWR grade one side teak face of Make: Novapan/ Kit Ply sides covered with 4mm thick teak wooden or PVC beading all around the shutter including piano type hinges, 40 mm dia PVC knob & 6 lever steel lock with duplicate key of godrej patteren best quality complete as shown in drg complete all as specified & directed. |
| 53 | Taking out unserveceable/ damaged back plywood from box of table writing and Supply & Fixed new back made with 6mm thick plywood commercial Exterior grade BWR complete all as specified & directed. Make: Century/ Kit ply or Sudarshan complete as Shown on drg & directed by Engineer-in-Charge. |
| 54 | Taking out unserveceable/ damaged drawers from Table writing and Supply & Fixed new drawers made with 12mm thick seasoned sheasham wood except bottom & bottomg of drawers shall be of 6mm thick ply wood commercial type BWR grade Make: Century/ Kit Ply or Sudarshan Including PVC or wooden Knob complete as shown on drg complete all as specified & directed. |
| 55 | Polishing with Hi-gloss French polish to match with the existing completeto theTable writing including preparation of old wooden surface complete all as specified & directed. |
| 56 | Table centre (FD- 174, 235 AND 274) Taking out Unserveceable top from table center and Supply & Fixed new top made of pre-laminated particle board one side teak face Exterior grade BWR 18mm thick Make: Archid/ Century/ Asis ply duly covered with 4mm thick teak wood beading with polishing all aroundthe table top complete all as specified & directed. |
| 57 | Taking out Unserveceable leg from table center and S&F new leg made of seasoned Shisham second class wood including rubber shoe at the bottom of leg matching with the existing shape & size complete all asspecified & directed by Engineer-in-Charge. |
| 58 | Taking out Unserveceable long rail from table center and S&F new front/ back rail made of seasoned Shisham second class wood matching with existing shape & size complete all as specified & directed. |
| 59 | Taking out Unserveceable side rails from table center and S&F new side rails made of seasoned Shisham second class wood matching with the existing shape & size complete all as specified & directed. |
| 60 | Polishing with Hi-gloss French polish to match with the existing completeto table centerincluding preparation of old wooden surface complete all as specified & directed. |
| 61 | Teapoy wooden (FD – 232, 278 AND 34) Taking out Unserveceable top from Teapoy wooden and Supply & Fixed new top made with18 mm thick pre laminated particle board , One side teak face in Baverian beach shade and balancing white lamination on other side Make (as specified in particular specification )including 6 mm thick first class hard wood (MP Teak) edging all around the top complete as shown in drg complete all as specified & directed. |
| 62 | Taking out Unserveceable leg from Teapoy wooden and S&F new leg made of seasoned Shisham second classwood including rubber shoe with screws at the bottom of leg matching with the existing shape & size, complete all asspecified & directed by Engineer-in-Charge. |
| 63 | Taking out Unserveceable front/back rails from Teapoy wooden and S&F new front/back rails made of seasoned Shishamsecond class wood matching with existing shape & size complete all as specified & directed. |
| 64 | Polishing with Hi-gloss French polish to match with the existing completeto theTeapoy wooden including preparation of old wooden surface complete all as specified & directed. |
| 65 | HAT STAND WITH MIRROR FD-233 Supply and fixing with replacement of old hat stand board with new blockboard commercial of18 mm thick pre laminated particle board One side teak face in Baverian beach shade and balancing white lamination on other side Make(as specified in particular specification )including 6 mm thick first class hard wood (MP Teak) edging all around the frame complete with Hi-gloss French polish to match with the existing complete all as specified, shown on drawing complete all as specified & directed. |
| 66 | Supply and fixing with replacement of old pegs with new pegs of Aluminiumanodized and replacement of oldmirror with new mirror as per existing size of make Saint Gobain/ Triveni Float Glass/ Atul/ Swastik/Golden fish/ Modias shown on drg as existing size complete all as specified & directed. |
| 67 | SIDE BOARD FD-241,FD-371. Taking out existing old unserviceable top andbottom of side board and providing new top and bottom made out of18 mm thick pre laminated particle board. One side teak face in Baverian beach shade and balancing white lamination on other side Make(as specified in particular specification )including 6 mm thick first class hard wood (MP Teak) edging all around the top and bottom complete as shown in drg complete all as specified & directed. |
| 68 | Taking out u/s ply wood from side board back side and providing new 6mm thick ply wood commercial BWR Gde I including polishing complete all as specified & directed. |
| 69 | Removing existing U/S shutter Supply and fixing new shutter double leaf made out of18 mm thick pre laminated particle board . One side teak face in Baverian beach shade and balancing white lamination on other side with continuous hinges cromium plated (Piono) and polishing complete 6mm thick teak wood edging shall be provided 40mm plastic knob superior quality in each shutter shall be provided complete all as specified & directed. |
| 70 | Taking out old unserviceable drawer from side board and providing new drawers made out of 1st class hard wood (Teak) and bottom of 6mm thick plywood commercial BWR Gde I including replacement of 40mm dia plastic knob superior quality in each drawer and polishing complete all as specified & directed. |
| 71 | CUSHION FOR SOFA SET 5 SEATER 100 mm thick 32 densitytepestry cloth dedatable type using one side suitable zip as approved over markincloth.Cushiontepesting cloth complete all as specified & directed. (Make :Cushion- Sleepwell, Kurlon) |
| 72 | SOFA SINGLE SEATER FD-234 (i) Taking out of defective components from single seater sofa set such as sofa spring cushion/coir,cotton layer,hession cloth, tapestry cloth nails, cane stick for fixing the spring etc. and supplu and fixing in replacement of new defective spring, coir of approved quality in seat and back, nails cane stick for fixing the spring and other necessary components which are involve for complete repair of sofa and including alround covered with approved standard tepestry cloth , cotton layer, tapestry cloth as approved by engineer in charge and as specified in Drg Fd-234. Note :- (i)Tapestry cloth,hession cloth & tapestry cloth & cushion shall be replaced in all single sofa and cost of these shalle be deem to be included in qouted rates. (ii) Rates of replacement of defective ply stiffeners ,Planks , rails shall be deem to be inclusive in quoted rates. (iii) All wood work and teak veneered surface shall be Hi Gloss french polished and rate for above shall be deem to be inclusive in quoted rates. |
| 73 | S&F in replacement of unserviceable legs of sofa set four seater and providing new legs made out of Ist class hard wood (Teak) duly polished complete all as specified & directed. |
| 74 | S&F in replacement of unserviceable hand rest of sofa set four seater and providing new hand rest made out of Ist class hard wood (Teak) duly covered complete all as specified & directed. |
| 75 | Note :- Credit shown in credit schedule of tender document shall be considered by the tenderer while quoting the rates of various items. The same shall be recovered from various payment to contractor before handing over old material. The contract amount shall be arrived at after deduction of Schedule of Credit from the total quoted amount in BOQ. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
