Tender For Improvement Of Water Bodies At Pudukkulam In Pudukkottai Municipality
Tender Value
Ref. Documents
Estimated cost
Bid Submission
11 Jul 2023
0 days left
EMD
5 Lakhs
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
pudukkottai → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Improvement Of Water Bodies At Pudukkulam In Pudukkottai Municipality
BOQ
| Sl. No. | Item Description |
| 1 | Clearing Heavy Jungle including loading and transportation charges etc, complete as per standard specification. |
| 2 | Earth work excavation deploying earth moving machineries for desilting Channel having a width of more than 10m and forming bund on either side and depositing the earth on banks including jungle cleareance etc complete. |
| 3 | Removal of Excavated Excess Earth away from the site to 2K.M including loading and transportation charges etc, complete as per standard specification. |
| 4 | Earth work excavation for foundation in Hard stiff clay, stiff black cotton, hard red earth, shales murram, gravel,stoney earth and earth mixed with small size boulders SS.20B and Sand, silt or other loose soil, wet sand,or silt not under water, light black cotton soil, sandy loam ordinary soil and to full depth as may be directed except in hardrockrequiring blasting inclusive of shoring shuttering and baling out water and cleaning and levelling the site etc.,complete Earthwork Excavation |
| 5 | Footing |
| 6 | Plinth |
| 7 | Supplying and filling in foundation andbasement with Crushed Stone Sand (M-Sand) in layers of not more than 15cm thick well rammed watered and compacted etc., complete complying with standard specification.- M Sand filling |
| 8 | Plain Cement Concrete 1:4:8 (one cement four fine aggregates and eight coarse aggregates) using 40mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges and all incidential charges such as water providing etc., complete as per standard specification |
| 9 | Supplying and erecting steel centering including necessary supports for plane surfaces for Reinforced Cement Concrete works such as column footings, column pedestals, plinth beams, grade beams, staircase steps, etc. which require only nominal strutting using mild steel sheets of size 90cm x 60cm and 10 BG stiffened with welded mild steel angles of size 25mm x 25mm x 3 mm for boarding, laid over silver oakjoists of size 10cm x 6.5cm spaced at about 75cm centre to centre or at suitable intervals etc. complete in all floors complying with standard specifcation. (Payment for centering shall be given after the concrete is laid) - Centering 1 |
| 10 | For Toe wall |
| 11 | For Footing,plinth beam |
| 12 | Supplying and erecting centering for sides and soffits including necessary supports and strutting upto 3.29 M height for plane surfaces as detailed below in all floors with all cross bracings using Mild Steel sheets of size 90 x 60 cm and 10 BG stiffened with welded Mild Steel angle of size 25mm x 25mm x 3 mm for boarding laid over silver oak joists of size 10cm x 6.50 cm spaced at abote 90 cm centre to centre and supported by casurina props of 10cm to 13 cm dia spaced at not more than 75 cm centre to centre etc. complete complying with the standard specificaiton. (Payment for centering shall be given after the concrete is laid) - Centering 2 |
| 13 | For plane surfaces such asslab,beam, etc. |
| 14 | For plane surfaces such asrectangular or square RCC columns, sunshades, top and bottom slab of RCC boxing, etc. |
| 15 | Plain Cement concrete1:2:4 (One cement two point five M-sand and four aggregates) mix using 20mm gauge hard granite broken stone jellyin all RCC works connected to the work excludingshuttering , Centering and cost of Reinforcement grills butincludingcuring ,finishingetc complete with standard specification and as directed by Engineer incharge. TNDSS NO.28 V,VI S25 |
| 16 | Plain Cement concrete1:1 1/2:3 (One cement one and half point M-sand and three aggregates) mix using 20mm gauge hard granite broken stone jellyin all RCC works connected to the work excludingshuttering , Centering and cost of Reinforcement grills butincludingcuring ,finishingetc complete with standard specification and as directed by Engineer incharge. TNDSS NO.28 V,VI S25 |
| 17 | Providing and fixing Bitumen Pad for Expansion joint in between pavement slabs to 12mm thick and fixed as shown in the drawing including cost and conveyence of expansion joints including shalimar pad and joint sealent etc, complete as per standard specification |
| 18 | Supplying and layingPaver Block of size 63mm thickM40 grade Providing and laying high strength type conforming IS 15658-2007 Of rubberized interlocking paver lock in size of minimum compressive strength of 40N mm2 in uniform shape of approved make to be laid in flurring bone pattern with sand cushion below the uniform shap of approvednon skitting surface in the top and the rate including levelling the base preparation ofpavers as sub base, sand cushion 100mm thick layingout of pavement cut the pieces to fix the edge vibring the pavers,sweeping tranporting loading unloading of laying paver block as per standard specification,. |
| 19 | Providing and laying in position Standardised Concrete Mix M-20 Grade in accordance with IS 456 - 2000 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement contenet of 325Kg/ cum and maximum water cement ratio of 0.55 including admixture (Plasticiser / super plasticiser) in recommended proportions as per IS 9103 to accelerate, related setting of concrete, improve workability without imparing strength and durability with about (5.0cum), 7730Kg of 20mm machine crushed stone jelly and with about (3.3 cum), 5156kg of 10 - 12mm machine crushed stone jelly and with about (4.79cum) 7670 kg of sand, but excluding cost of reinforcement grill and fabricating charges centering and shuttering but including laying, vibrating with mechanical vibrators, finishing, curing, etc and providing fixtures like fan clamps in the RCC floor / roof slabs wherever necessary without claiming extra cost etc., complete complying with standard specification and as directed by the departmental officers - The Coarse and Fine aggregates to be used should comply with the requiremnents of IS staandards. (No separate payment will be made by the Department for the excess usage of materials) |
| 20 | Basement |
| 21 | Above basement |
| 22 | Suppling and fabricating and placing in position MS(or) R.T.S. bar for reinforcement to all RCC works as per the design given including cost ofsteel and binding wire also in all floors. |
| 23 | Brick work in CM 1:5 (one cement & five sand) using II class ground moulded bricks of size 9\"X43/8\"X 2 3/4\" including finishing, curing, etc., complete complying with standard specification.- |
| 24 | Basement |
| 25 | Ground floor |
| 26 | Supplying and filling in foundation andbasement with Well Gravel in layers of not more than 15cm thick well rammed watered and compacted etc., complete complying with standard specification..- Basement filling |
| 27 | Plastering with cement mortar (1:5) 12mm ,thick in all floors including cost and conveyance of all materilas to site and labour charges etc,complete as per standard specifications (S.I.306) |
| 28 | Plastering with cement mortar (1:3) 10mm thick in all floors including cost and conveyance of all materials to site and labour charges etc, complete complying with standard specifications (S.I.309 |
| 29 | White washing two coats with freshly burnt shell lime white in colour in all floors including cost of lime and other materials brushes scaffolding charges etc.complete complying with standard specification and as directed. |
| 30 | Painting two coats with ready mixed Plastic Emulsion Paint S.I.358 Plastic emulison paint of\"approved quality and colour over a priming coat, including thoroughscraping, clean removal of dirt, etc complete and including necessary plaster of paris, putty, wherever required including cost and conveyance of all materials etc.and all lobour charges etc.complete as per Standard specification and as directed by the departmental officers. |
| 31 | Paving the floor with design antiskid ceramic tiles (colour and shade as directed) of size 305mm x 305 mm x 6mm in all floor aver a base layer of cement mortar 1:3 (one cement and three sand) 20 mm thick laid in situ and pointed with same coloured cement. |
| 32 | Dadooing walls withGlazed tiles of sizes 305mm X200mm X 6mm size of approved make and quality and colour l Set in cement mortar 1:2 (one cement ,two sand) over 10 mm base layer plastering and pointing with white cement neatly as directed. |
| 33 | Supply and Delivery Fabrication of MS doors and windows with outer frame and shutter frame in MS angle of size 40mm x 40mm x 6 mm with MS flat 25mm x 25mm x 6mm and MS sheet of 18 gauge including ventilating arrangements using 20mm square MS rods with locking arrangements including two coats of approved enamel paint over coat of red oxide including cost of angles, plates, sheets, fabrication charges, cost of hold fast and transportation charges etc.,complete.TWAD-2022-23, Pg.no.91 |
| 34 | Fully panelled Single leaf - Door (0.90 m x 2.00 m) |
| 35 | Fully panelled Single leaf - Door (0.75 m x 2.10 m) |
| 36 | Fully panelled Double leaf - Window 1.20 m x0.90 m |
| 37 | Ventilator - 0.45 m x0.60 m |
| 38 | Manufacturing, Supplying and Fixing of Stainless Steel Hand rails for staircase using 50mm dia 304L Grade Stainless Steel pipe of 1.60mm thick at required locations to a height of 900mm from finished floor level welded to 38mm dia Stainless Steel pipe post of 1.00mm thick as vertical at 900mm centre with 2 Nos. of 25mm dia intermediate horizontal stainless steel pipe of 1.60mm thick in between. The vertical pipe has to be welded to the 100 X 100 X 6mm MS base plate encased in the base concrete. The rate is inclusive of the charges for cutting, bending, welding, grinding, polishing, conveyance, electrical charges, etc. complete. PWD SOR 2022-23, Pg.no.57 |
| 39 | Weathering Course with Concrete Broken Brick (S.I.No.278) & ( P & D) Data 54.Jelly 20mm gauge in pure slaked lime (no sand to be added) over roof slab,the proportion of brick jelly to lime being \"32 to 12.5 well beated with wooden beaters for giving required slope and thickness as directed by the departmental officers.etc., complete.-1 m 3 |
| 40 | Finishing the top of roof with one course of machine pressedtiles of size 200 mm x 200 mm x 20 mm of approved quality in Cement Mortar 1:3 (One Cement add three sand) 12 mm thick mixed with water proofing compound conforming to ISS at 2% by weight of cement used and the joints pointed neatly to full depth of tiles with the same cement mortar mixed with red oxide and water proofing compound including curing etc., complete |
| 41 | Supplying and fixing G.I.pipe 32mm dia ( B class) induding cutting on fixing in kerb wall and providing weldmesh of size 150x500mm size 10 gauage and providing MS flat 35x6mm size at middle angle allowed if size 25x25x5mm including cost conveyance and welding with weld mesh |
| 42 | Design Fabrication, Supply and erection of bar screen made of MS 10mm square bars to suit the channel. Inner size of channel 1000mm , wide 900mm liquid depth and 1200mm length. The MS 10mm square bars should be properly epoxy coated to avoid the rusting of bars. The spacing betweenthe square bar is 5mm, so that the particles above 5mm will be retained in the entry channel and will be cleared by hand rac manually. Thebar screen should be kept at an inclination of 60o. The bar screen is fixed at site, inside the channel with a groove like arrangements, so that bar screen could be removed for maintenance purpose. The cost includes cost of MS bars, fabrication charges, Epoxy painting charges and fixing at site transport charges to site., etc., complete. |
| 43 | Design Supply and erection ofCoagulant dosing pump with the capacity of 0-6 liters per hour @ 4 kg/cm2,with 0.16 HP.The material of construction of thedosing pump is polypropene. The pump is fitted Base framenecessary bolts and nut . The capacity of the tank 200 liters with HDFE. The pump is fitted with a suction and delivery line. Necessary foot valve, level indicatoris provided withthe pump. Including the suitableAgitator for dosing pump The cost includes the cost of the pump, tank, foot valves, delivery and suction tubes of standard length, Agitator, labour charges, transport charges, erection charges etc., complete. |
| 44 | Design Supply and erection ofFlocculentdosing pump with the capacity of0-50 liters per hour @ 4 kg/cm2,with 0.16 HP .The material of construction of thedosing pump is polypropene. The pump is fitted Base framenecessary bolts and nut . The capacity of the tank 200 liters in HDPE. The pump is fitted with a suction and delivery line. Necessary foot valve, level indicatoris provided withthe pump. Including the suitableAgitator for dosing pump The cost includes the cost of the pump, tank, foot valves, delivery and suction tubes of standard length, Agitator, labour charges, transport charges, erection charges etc., complete. |
| 45 | Design Supply and erection of air blowers Ring Blower with electrical Motor, 16 m3/hr,0.50 HP motor .Air blower with motor are provided for one number for operational and one number for standby. The Air blower make is of Raico/Equivalentto suit the design requirements. The Air blower with motor is fixedin a base frame. Necessary foundation bolts, nuts are provided to fix the total coupled assembly of Air blower and motor in the concrete bed. The cost includes the cost of Air blower, base frame , diffusers, foundation bolts, erection charges, transport charges, labour charges., etc., complete. |
| 46 | Design, Fabrication, supply, erection of tube settler media with PVC 1000mm depth 1.1mm thickness in hexagonal chevron shaped fixed with 60 degree slope in tube settler tank including the cost of tube settler media, erection charges , transport charges, labour charges.etc., complete |
| 47 | Design Supply and erection of Sand Filter feed pump with motor withthe capacity of 5 m3 as per the design. The type of the pump is horizontal, Centrifugal,flexible coupling drive arrangement. The pump make is kirloskar/CRI/equivalent, The capacity of the motor is 2 HP. The motor type suitable for 3 phase supply,440v, 50hz .Motor make is Kirloskar/CRI/Equivalent. Necessary base frame, foundation bolts nuts are provided to fix the coupled pump set above the foundation bed. The cost includes thepump, motor, Stand by pump and motor, base frame, Motor Guards, foundation bolts, labour charges, erection charges, transport charges etc., complete. |
| 48 | Design Supply, fabrication and erection of Multi gradedSand filter unit with 610mm diaand 1828 mm height. Multi gradedSand filter is a vertical, cylindrical vessel made out ofFRP The inlet pipe inside the vessel is designed to have a bell mouth arrangements for liquid/water distribution, so that the filter media is in position & will notget disturbed. The bottom collection system is provided with header and lateral pipe arrangements with necessary holes. The filtered water is collected thro this header lateral pipes, will flow out to outlet pipes and viceversa. The filter media consists of Multi graded sandfilled over & under bed media of pebbles and gravels. The size and height of the filter media is as per the design and standards.The joints are properly vessel (Multi gradedSand Filter ) is supported by FRP legs, thereby fixing the vessel with foundation bolts properly in the concrete foundation bed. The cost includes the cost of materialsbolts, nuts and washers, filter media, foundation bolts fabrication charges, welding charges, erection charges, transport charges and paintingetc., complete. |
| 49 | Design Supply, fabrication and erection of Eco Ozotex with Ozone Generatorincludes the ozone recirculation pump in 4 m3 /hour.The type of the pump is horizontal, Centrifugal, Non clog, self priming flexible coupling drive arrangement. The pump make is kirloskar/CRI/equivalent, The capacity of the motor is 1 HP. The type of the motor is TEFC, IP55, CLSS-F insulation, suitable for 3 phase supply, 440V, 50HZ . ozone generator with a capacity of 100 gms / hour with oxygen concentrator, including the cost of epoxy coating for ozone reactor tank, water ozone mixing equipments with level gauge, safty valve with1 HP motor. The cost includes theozone generator, oxygen generator,ozone recirculation pump, motor, Stand by pump and motor for ozone recirculation pump, base frame, Motor Guards, foundation bolts, labour charges, erection charges, transport charges etc., complete. |
| 50 | Design Supply and erection of Back wash pump with motor withthe capacity of 5 m3 /hr , head of 3mas per the design. The type of the pump is horizontal, Centrifugal, Non clog, self priming flexible coupling drive arrangement. The pump make is kirloskar/CRI/equivalent, The capacity of the motor is 2 HP. The type of the motor is TEFC, IP55, CLSS-F insulation, suitable for 3 phase supply, 440V, 50HZ .Motor make is Kirloskar/CRI/Equivalent. Necessary base frame, foundation bolts nuts are provided to fix the coupled pump set above the foundation bed. The cost includes thepump, motor, Stand by pump and motor, base frame, Motor Guards, foundation bolts, labour charges, erection charges, transport charges etc., complete. |
| 51 | Design Supply, Fabrication and erection of piping for sewage treatment plant of capacity 100 m3 The piping work consists of1)Pipe lines for Blowers to Equalization tank Both MS and PVC pipes with necessary valves, pressure gauges are used as per the design and suit the flow rate.2)Pipelines from Collectiontankand Multigraded sand filter 3)Pipe linefrom multigraded Sand filter to Eco Ozotex reactor4) Pipe line from Backwash pump to Mutigraded filter5) Necessary pipe lines , valves, pressure Gauge for filters, flow meters for tube settler feed, Sand filter , float level switchThe total piping network as given above, is within the sewage treatment units.The cost includes the cost of pipes (MS, UPVC and 1\" dia to 3\"dia), Specials, valves, pressure gauges, flow meters, pipe fittings, fabrication charges, labour charges, transportation charges etc, complete. |
| 52 | Design, Fabrication, supply, erection of electrical panel board with necessary starters, main switches, voltmeter, ammeter, and electrical cables of required sizes from pumps to panel board as per design. The size of panel board is approximately2 feet x 2 feet, fabricated with MS sheets and powder coat. Necessary provisions are given in the panel board for bus bars, main switch , starters, switches, voltmeter ammeter as per the design to suit sewage Treatment plant motors. The cables are run from panel board to the all pumps and other electrical accessories such as level switches dosing pumps etc complete,. The cable sizes are as per the design and suitable for electrical motors fixed in the Sewage treatment Plant.No lighting points are considered. The cost includes the cost of panel board, starters, switches, voltmeter, Ammeter, main switch, cables for motors, labour chargesetc., complete. |
| 53 | Supply and Delivery and fixing of outside MS Ladder of 45cm clear wide made out of 50 mm x 50mm x 6mm MS angle for sides and steps in 16 mm MS plain rods fixed at 30cm C/C welded jointed etc ., providing with suitable side supports, clamps and locking arrangements provided with two coats of approved enamel paint over one coat of redoxide paint. |
| 54 | Dismanling the existing Reinforced Cement Concrete using deploying machineries, clearing away and carefully stacking materials useful for re-use for any thickness of walls. PWD SOR 2022-23, Pg.no.22 |
| 55 | Supplying and fixing in position white / colour glazed European Water Closet of best quality and approved make with 100 mm \"P\" or \"S\" trap connecting with CI pipe of 100mm dia / PVC pipe of 110mm dia, double flapped rigid PVC black seat and seat cover with CP brass hinges including cost of white cement, cement for packing, spun yarn, teak wood plugs, brass screws, etc., including supplying and fixing 10 liters capacity PVC / 12.5 liters capacity porcelin low level flushing tank with a pair of CI brackets, etc., complete with all fittings such as 15mm brass ball valve with polythene float with brass handle, union, coupling connected by means of 40mm white PVC flush hand using Indian adopter joint including all internal fittings. (SOR 2022-23, Pg.no.56) |
| 56 | Supplying, laying and jointing PVC Pipes of approved quality pipe of the following dia including labour fixing PVC Specials, including charges for cutting and threading of pipes, cost of such specials with necessary teak wood plugs, clamps, screws, thread balls, shellac, etc., etc., complete |
| 57 | 20mm PVC pipe |
| 58 | 20mm PVC Elbow |
| 59 | 20mm PVC Bend |
| 60 | 20mm PVC Tee |
| 61 | Chromium Plated Stop Cock 15mm dia |
| 62 | 110mm PVC pipe |
| 63 | 110mm PVC bend |
| 64 | 110mm PVC door Elbow |
| 65 | 110mm PVC vent cowl |
| 66 | Providing & fixing PVC RAIN WATER DOWNFALL PIPE of the following dia with necessary T.W.Clamps Plugs, Shoes,Bemds, other clamps, screws nails etc.,complete complying with standard specification. The rate is inclusive of cost of removable iron gratings of appropriate size. The size of Teak Wood plugs used is 150X25mm in front & 200x75mm in rear (wall side) with a depth of 110mm. The pipe is to be fixed by means of \"U\" clamps at the centre of pipes to be fixed.110mm dia PVC Pipe [4 Kg/SqCm] |
| 67 | Supply and fixing of TNEB meter Board suitable for 32 A Three phase service connection with 32A fuse unit(500V)32A neutral link and earth link (1\" x 1/8\" Copper flat) on T.W plank of size 600mm x450mm x 19mm with supportingT.W.reepers of 1\" thick oneither sider with painting withsuitable bolt and nuts for fixingthe TW plank on wall withearth connection and interconnection with 7/20 PVCinsulated copper wire from EBmeter to fuse unit. SD 127) |
| 68 | Wiring with 2 x 1.5 sqmm (22 /0.3 ) PVC insulated single core unsheathed copper conductor cable of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories inflush with wall with 3mm thick hylum sheet cover with TW switch box and 5A F.T. switch with continuous earth wire connection of 14 SWG TC wire for making good of the concealed portion with suitable colour for PVC concealed light point / Fan point (For Electronic regulator). SD 23 |
| 69 | Wiring with 2 x 1.5 sqmm (22 /0.3 ) PVC insulated single core unsheathed copper conductor cable of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories inflush with wall with 150 x 100 x 113 mm TW switch box with 3mm hylum sheet cover for5A 3 pin non inter locking CS plug with continuous earth wire connection of 14 SWG TC wire and making good of the concealed portion with suitable colour for concealed PVC plug point. SD 38 |
| 70 | Supply and fixing of single box type 4feet 18 Crystal Glass LED Tube Light Fitting complete with electronic ballast with TW round blockson wall or ceiling with led tube with PVC unsheathed Copper leads from terminals to the fitting. |
| 71 | Supply and fixing of fancy glass shade and 11W CFLfor BH Point. SD-80 |
| 72 | Supply and errection of CCTV in the following items. |
| 73 | Armoured cat-6 cable (PWD SOR page no:153) |
| 74 | POE switch for camera - 8 port (PWD SOR page no;153) |
| 75 | Hard disk for NVR 6 TB (PWD SOR page no;155) |
| 76 | Net work video record for CCTV 8 Channel - 1 SATA 1 No Hard disk(PWD SOR page no;154) |
| 77 | CCTV camera |
| 78 | Rack with Accessories 6U Rack(PWD SOR page no;155) |
| 79 | I/O SOKET RJ 45 (PWD SOR page no;155) |
| 80 | I/O SOKET RJ 11(PWD SOR page no;155) |
| 81 | 29\" LED TV |
| 82 | Supply and fixng of TNEB meter board suitable for 3 phase 100A service connection made up of suitable angle iron frame work of size 2 feet x 1-1/2 feet using angle iron of size 1-1/2\" x 1-1/2\" x 1/4\" rigidly fixed on wall covered with hylem sheet of size 2 feet x 1-1/2 feet of 12mm thickness with necessary bolts and nuts supports and supplyand fixing of 3 Nos. 100A fuse units (500V), 1 No. neutral link, copper earth flat of size 1\" x 1/4\" with inter connection of EB meter to fuse units by 16 Sq.mm PVC insulated copper wire with earth connection complete PWDELECTRICAL SD 2022- 23- SD-130 |
| 83 | Earthing as per the ISI specification with an earth electrode of 2.10 metre Class \"B\" GI pipe of dia not less than 40mm with copper earth plate of size 125mm x 50mm x 6mm with necessary funneling arrangements with necessary masonry work and with 38mm RCC cover slab for the brick masonry PWDELECTRICAL SD 2022- 23- SD-233 |
| 84 | Supply and Erection of GI steel Tubular pole for street light 6.00 Metre Length Single Bracket Pole with Base Plate (250 x250 x 6mm) 76.10mm OD x 3.65mm Thick x 6000mm Lengthetc.Complete. PWD SOR 2022- 23- page 148 |
| 85 | SINGLE PHASE DISTRIBUTION BOARD WITH MCBs 4 ways single phase DB No. of ways incomer MCB / Isolator - 2 No. of ways incomer ELCB / RCD - 2 No. of outgoings ways - 2.(SPMCB DB with Acrylic Door Cover with IP 42 Protection) PWD SOR 2022- 23- page 139 |
| 86 | Supply and laying of 2 x 6 sq.mm PVC armoured LTUG cable in a trench to be excavated at a depth of 0.75metre putting 0.15 metre layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good PWDELECTRICAL SD 2022- 23-(SD 197) |
| 87 | Supply and fixing ofMS Kiosk of size 0.75m x 0.45m x 0.75m made up of MS angle of size 50mm x 50mmx 4mm alround covered with 16 gauge MS sheet and kiosk door made up of MS plates of size 25 mm x 3 mm including cutting, welding, grinding, locking arrangements and labour charges etc.,TWAD SOR 2022-23 - P.NO 89 |
| 88 | Supply and fixing of FUSE UNITS 63 Amps Porcelain Fuse Unit (500V) PWD SOR 2022- 23- page 120 |
| 89 | Supply and fixing ofTRIPLE POLE SWITCHES (SIDE HANDLE) 100 Amps TPN Switch with HRC Fuses Sheet Steel Double Break PWD SOR 2022- 23- page 119 |
| 90 | Supply and fixing of NEUTRAL LINK 15 AMPS12 Way Neutral Link PWD SOR 2021- 22- page 126 |
| 91 | Supply and fixing of4 of 7/16 sq.mm wireinculding all material labour charges etc., complete PWD SOR 2021- 23- page 156 |
| 92 | Supply and fixing of2 of 7/20 sq.mm wireinculding all material labour charges etc., complete PWD SOR 2022- 23- page 156 |
| 93 | Supply and fixing of 63A TPN Switch Disconnector Fuse Units interior only with HRC Fuses Double Breakinculding all material labour charges etc., complete PWD SOR 2022- 23- page 119 |
| 94 | Supply and fixing of 3 phase 32A aerial fuse unit for 3 Nos. 32A fuse units (500V) on suitable MS sheet covered with 6mm thick hylem sheet on suitable angle iron work the tapping pole with necessary clampPWD SOR 2022- 23- page 114 |
| 95 | Supply and fixing of 30W LED Street Light Fitting with LED Outdoor Fittings (Light Emitting Diode)Higher End Philips / Havells / Equivalent etc complete. PWD SOR 2022- 23- page 115 |
| 96 | Supply and fixing ofSynthetic Moulded Compound Box for Street Lightetc complete. PWD SOR 2022- 23- page 126 |
| 97 | Design, supply, erection, testingand handing over of Mini High Mast Structure Bajaj/ Philips/ make or equivalent with required number of continuously tapered hot dip galvanized steel polygonal sides sections with telescopic strip joints to a total height of 12.00 meters capable of sustaining the maximum wind pressure at the erection site with single flange base plate secured welded in the bottom of the base mast section with vertically movable hot dip galvanized lantern carriage and accessories such as electrical junction box brackets for providing 6 Nos. 150W LED light luminaries with control gear box complete head frame assembly, Pulley drive, stainless steel wire rope single/double drum self lubricating winch arrangement suitable for raising and lowering the luminaries carriage ring flexible multi core power cable and necessary high tensile hot dipped galvanized foundation, bolt & nuts along with washers and anchor plates and templates including supply and fixing the following accessories in the Mast.(MR)SOR 2022-23, P.no.150 |
| 98 | Supply and insallation Cabinet Type Class 1 and 2 Combined Model SPD to arrest surges and overvoltages in the power line due to lighning switching action etc. they must be installed in the incoming MCC panel / DB of the respective buling in parallel to the power circuit. Model: PSV4-12.5/400TT (3 phase power network) SOR 2022-23, P.no.151 |
| 99 | Supply and insallation maintenance free GI Earthing System comprising of 50mm dia and 2 mtr. long earth electrode of low carbon steel rod with 100 micron bonding and 25 kgs. of carbon based environment friendly backfill compound and suitable clamp. SOR 2022-23, P.no.151 |
| 100 | Hot dip galvanized lightening arrestor |
| 101 | Supply and laying of 4 x 10 sq mm PVC armoured LTUG cable in a trench to be excavated at a depth of 0.75 metre putting 0.15 mt. Laner of sand and covering the cable completely with bricks and sand and refilling the earth to make good SOR 2022-23, SD -220 |
| 102 | Supply and fixing of the 4x10 sqmm brass cable gland for the 4x10sqmm PVC Armoured LTUG cable with earth connection.SOR 2022-23, SD -182 |
| 103 | Supply, Delivery and Providing Three Seater back slope Granite stiff sitting benches 5 feet in length 1.50 feet width 600x450x100 mm size Hard Granite slab side walls, 150x45x100 mm size bench slab back slope slab including cost and conveyance and fixing in position etc complete |
| 104 | Providing various designs of Animal Dust bins made of 3 layer fiber structure with multi colour powder coating. The height of the dist bins 4 feet available models are penguin, Rabbit, Fish and monkey |
| 105 | Design, fabrication, suppty, erection and commissioning ofembedded parts consisting of sill beam, wheel tracks, seal seats, guide rails etc., with all accessories for vertical barrage gate including cost of all materials, machinery, labour, cutting, aligning, anchoring, welding, finishing, cleaning, applying one coat of zinc rich epoxy primer and four coats of cold applied coal tar epoxy paint etc., complete as per specifications and approved drawings with lead upto 1 kmand all lifts for skuctural steel components and all leads and lifts steel components and all leads and lifts including packing / forwarding charges tor other components / materials, Note:1, Wf of 1 set of embedded parts in tonnes= 0.0055 (L² x H x h)0.716Where(L) is length = Clear distance between piers in m + 1 m.(H) is total heiqht of gate in m = FRL - Sill level + 0.20 m (h) is head of water above sill of gate in m = FRL _ Sill tevel2. Quantity of structural steel = 82.3 %of computed weight of 1 set |
| 106 | Supplying and Planting of Neem tree sapling of height 180 - 240 cm in polythene bag of dia 30cm including supporting stack of 5 cm dia casurina pole of 10 feet height, including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the site in-charge. |
| 107 | Supplying and Planting of Poovarasu tree sapling of height 180 - 240 cm in polythene bag of dia 30cm including supporting stack of 5 cm dia casurina pole of 10 feet height, including loadingand unloading charges,transportation, stacking of saplings at site, earth work excavation of required size, planting ofsapling, refilling of excavated earth etc asdirected by the site in-charge. |
| 108 | Supplying and Planting of Pungam trees apling of height 180 - 240 cm in polythene bag of dia 30cm including supporting stack of 5 cm dia casurina pole of 10 feet height, including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc asdirected by the site in-charge. |
| 109 | Supplying and erection of Children play equipment Family swing compo 3 Single seater SS chain using G.I Pipes with M.S Angles and flatsetc., including fabrication, transportingto site, erection and fixing in proper position, painting with Enamel paint as directed and labour charges etc., complete. (Play equipment Ref. no. SW-20) |
| 110 | Supplying and fixing of Spiral Slide 560*to a height of 11 Ft with a product area of 3 x 16 Ft, that installed in a play area of 6 x 24 Ft, including necessary earthwork excavation, PCC 1:2:4 and cost of materials, labour charges, conveyance, etc. complete as per the specifications directed by the department officers.(Play equipment Ref. no. SW-16) |
| 111 | Supplying and erection of Children play equipment SingleSea saw -6 seaterusing ‘B’ Class G.I Pipes with M.S Angles and flatsetc., including fabrication, transportingto site, erection and fixing in proper position, painting with Enamel paint as directed and labour charges etc., complete. (Play equipment Ref. no. SS-04) |
| 112 | Supplying and fixing of Spring rider - Honey bee equipment of which made of 2 inch galvanized “C” class pipe and Spring made of MS steel, including necessary earthwork excavation, PCC 1:2:4 and cost of materials, labour charges, conveyance, etc. complete as per the specifications directed by the department officers.(Play equipment Ref. no. SR-02) |
AI Tender Summary
Tender Timeline
Jun 09, 2023
11:30 IST
Tender Published
Tender notice published.
CompletedJul 11, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJul 11, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender