Dharapuram Municipality-agecode007 has published Tender For Dharapuram Municipality Construction Of Compound Wall And Providing Shed For Shredder Machine In Micro Compost Centre At Old Housing Unit Ward -23. Submission Date for this Tender is 15-06-2023. Wall Construction Tenders in dharapuram Tamil Nadu. Bidders can get complete Tender details and download the document.
Sl. No. | Item Description |
1 | Dismantling,Brick Masonry in cement mortar walls under 3m height clearing away and carefully stacking materials useful for reuse for any thickness of walls includingall charges etc ., complete as per standard specifications. |
2 | Earth work open excavation and depositing on bank with in the initial lead of 10m and a lift of 2m in hard stiff clay, stiff block cotton, hard red earth, shales, murram, gravel, stoney earth and earth mixed with small size boulders etc. complete. complying with std. specifications.SS 20 A |
3 | Plain Cement Concrete 1:4:8 (one cement four Crushed stone Sandand eight coarse aggregates) using 40mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges and all incidential charges such as water providing etc., complete as per standard specification |
4 | Centering for soffits of RCC slabs of plane surface like lintels, beams ,etc.,including strutting 3m high using mild steel sheets of size 90cm X60cm X and B.G 10 stiffened with M.S angles of size 25mm X 25mm X 3mm laid over silver Oak (C.W) joists of size 10cm X 6.5cm (spaced at about 90cm c/c )and supported dy casurina props of 10cm to 13cm dia (spaced of 75cm C/C) complying with standard specification and directed - 10 m 2 (P & D)Data 38 |
5 | drain |
6 | Plain Cement Concrete 1:3:6 (one cement, three Crushed stone Sandand six coarse aggregates) using 20mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges etc., complete as per standard specification |
7 | Supply and Fixing RCC Pre Cast Slab RCC 1:1.5:3 mix (one cement, one and half sand & three course aggregate) using 20mm gauge hand broken/ and broken granite stone for all RCCitemsof works including centering shuttering and but excluding steel cost of reinforcement cost including curing etc.,complete and alsoincluding fixingfan clamps and fixtures in rccworkswherever necessary as directed by departmentalofficer etc., complete. |
8 | Suppling and fabricating and placing in position MS(or) R.T.S. bar for reinforcement to all RCC works as per the design given including cost ofsteel and binding wire also in all floors. |
9 | Brick work in CM 1:5 (one cement & five Crushed stone Sand ) using II class ground moulded bricks of size 9"X43/8"X 2 3/4" including finishing, curing, etc., complete complying with standard specification - 100CFT |
10 | Plastering with cement mortar (1:5) 12mm ,thick in all floors including cost and conveyance of all materilas to site and labour charges etc,complete as per standard specifications (S.I.306) |
11 | "Paving the floor with design Shahabad stone tiles (colour and shade as directed) of size 600 mm x 600mm x 20mm in all floors over a base layer of cement mortar 1:3 (one cement and three Crushed stone Sand) 20mm thick laid in-situ and pointed with same coloured cement etc, complete as per standard specification" |
12 | Dadooing walls withGlazed tiles of sizes 305mm X200mm X 6mm size of approved make and quality and colour l Set in cement mortar 1:2 (one cement ,two Crushed stone Sand ) over 10 mm base layer plastering and pointing with white cement neatly as directed. |
13 | Supply and fixing of Weld Mesh 7.5 x 2.5cm 10 Gauge including all cost & conveyance |
14 | Painting two coats of newly plastered wall surface with ready mixed Cement paint of first quality and of approved colour over a priming coat including preparing the surface, clean removal of dirt and including necessary plaster of paris putty wherever required etc., complete complying with standard specification. |
15 | Supplying, fabricating, erecting structural steel work for roofing welded or bolted type using MS channels, angles, plates and round bars etc. conforming to IS specification including primer coating and enamal painting as per Design given by the departmental officers etc, complete as per standard specification |
16 | Fabricating supplying and fixing of pre painted galvanized iron sheets with the following specification. The materials should be of PPGI tile profile with a red colour or any other approved design 0.47 mm thick 24 guage having width 1050 mm. The sheet should be G.I.base pre painted hot dipped galvanized iron sheet and to be fixed with shelf tapping screws,plastic washer.The washer and screws to be fixed by using minute power machine drilled with out damaging the sheets paint coating to be regular modified polyster coat with zinc coating of Z 120 GSM paint thickness the finish should be terra cotta finish like malabar mangalore tiles finish optional matt finish. The sheet to be fixed with making suitable corrugated,cutting the sheet in to the required size and making ornamental designs as per the site condition and as directed by the departmental officers. |
17 | Supply and fixing of M.S Grills with Doors and Windows with one coat of Red oxide with Primer including all costs such as welding,grinding and fabrication charges, cost and conveyance of all materials to site etc,complete as per standard specification. |
18 | Wiring with 2 x 1.5 sq.mm. (22 / 0.3) PVC insulated SC unsheathed copper conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories and with TW switch box and 5A FT switch with painting of suitable colour for open PVC light point / fan point (for electronic regulator) (5 points per coil) SD - 18 |
19 | Supply and fixing of20W 4 feet LED Fitting withLED etc.,complete as per standard specifications |
20 | Supply and fixing of 450mm sweep Wall mounting fan including all cost of labour and materials etc.,complete as per standard specifications |
21 | Supply and fixing of48WLED Street lightFitting withLED etc.,complete as per standard specifications |
22 | Supply and fixing of brass cable gland for 3-1/2 x 95 sq.mm. PVC LTUG aluminium armoured cable with earth connection |
23 | Supply and delivery ofsubmersible 2.50sqm PVC Insulated and sheathed 3 core Flat type copper cable confirming to IS694/1990 |
24 | Supply and delivery of GI Pipe and specials laying and labour chargesetc., complete as per standard specification |
25 | 80mm GI pipe |
26 | 80mm GI bend |
27 | 80mm GI Union |
28 | 80mm x 50mm Reducer |
29 | 50mm x 32mm Reducer |
30 | 32mm GI Union |
31 | 50mm GI bend |
32 | Supply and fixing of 200Amps porcelain fuse unit (500V) etccomplete as per standard specification |
33 | Supply and delivery of direct online starter confirming to IS13947, IEC60947-1 and as amended thereafter with suitable KW rating for operation in AC/Three Phase/50HZ(± 5%) and 415 V(±10%) including Ammeter, Voltmeter, Thermal Overload relay, 16 Amps 2 pole Magnetic Contactor with under Voltage protection, Indication lamp, starting capacitor, running capacitor and On/Off Push button switches, 5 way connector, wiring with 1 sq. mm/1.5 sq. mm copper PVC insulated cable, powder coated vermin proof box including the capacitor (the cost of capacitor is to be taken separately). |
34 | Supply and delivery of PVC pipe specials |
35 | a) 75mm PVC Pipe |
36 | b) 75mm PVC Tee |
37 | c)75mm PVC Elbow |
38 | d) 75mm PVC Cowl |
39 | Supply & Fixing of AC Exhaust Fan 450mm (18") Sweep (Heavy Duty) |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail