Tender For Dharapuram Municipality Providing 100Mm Di K7 Distribution Main At Anna Nagar And Tiruppur Road
Tender Value
22 Lakhs
Estimated cost
Bid Submission
20 Jun 2023
0 days left
EMD
22000
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
dharapuram → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Dharapuram Municipality Providing 100Mm Di K7 Distribution Main At Anna Nagar And Tiruppur Road Providing 100Mm Di K7 Distribution Main At Anna Nagar And Tiruppur Road
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 15-Jun-2023 | Extension of Date to 19.06.2023 | Date | 19-Jun-2023 |
| 2 | 19-Jun-2023 | Extension of Tender Date | Date | 20-Jun-2023 |
BOQ
| Sl. No. | Item Description |
| 1 | Earth work excavation for foundation in all kinds of soils and sub soils to full depth as directed by the departmental officers except hard rockinclusive of shoring strutting and balling out water wherever necessary and refilling the sides of foundation with excavated earth in layers of 15cm thick well rammed and consolidated and depositing the surplus earth with in the compound in places shown by the departmental officers with initial lead of 10 meters and initial lift of 2 meters including cost of all labour charges etc., complete as per standard specification TWAD SOR 2022-2023, P.No.295 |
| 2 | a) for 100 mm Dia DI pipe |
| 3 | b) for Valve Pit |
| 4 | Plain Cement Concrete 1:5:10 (one cement, fiveCrushed stone Sandand ten coarse aggregates) using 40mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges etc., complete as per standard specification |
| 5 | Brick work in CM 1:5 (one cement & five Crushed stone Sand ) using II class ground moulded bricks of size 9\"X43/8\"X 2 3/4\" including finishing, curing, etc., complete complying with standard specification - 100CFT |
| 6 | Plastering with cement mortar (1:3) 12mm ,thick in all floors including cost and conveyance of all materilas to site and labour charges etc,complete as per standard specifications |
| 7 | Plastering with cement mortar (1:5) 12mm ,thick in all floors including cost and conveyance of all materilas to site and labour charges etc,complete as per standard specifications |
| 8 | Supplying and delivery of following sizes of DI pipes Socket/spigot pipesto site, confirming to specification as per IS:8329-2000 for standard length including cost of pipes, testing charges at factory, labour charges for loading, unloading and stacking at site etcDUCTILE IRON SOCKET/SPIGOT PIPES FOR CLASS K7 AS PER IS 8329/2000 AS PER IS 8329/2000 TWAD SOR 2022-23, P.No.46, Table-6, Sl.No.1 |
| 9 | 100 mm Dia DI pipe |
| 10 | Lowering of D.I Pipes and Specials in the trenches and laying to proper grade and alingnment and as directed by the TWAD Officers. TWAD SOR 2022-2023 P.No.258, Part (IV) a, Sl.No.7a(i) |
| 11 | 100 mm Dia DI pipe |
| 12 | Supply and delivery of DI D/F Gate sluice valves (soft seated) resilient seated soft sealing Gate Valves(Sluice Valves) with body Bonnet of Ductile cast iron ofGrade GGG 40 or Wedge fully rubber lined with EPDM replaceable spindle nut without gland packing and with 3 O-equivalent grade,Ring protection on the shaft and seals of NBR and the valves should be of Vacuum tight and 100% leak proof with face to face dimensions as per BS 5163-89/ISI 4846-2000/DIN 3202 F4.All the valves should be with electrostatic powder coating both inside and out side with pocket less straight through body passage. All the valves are to be compatible for buried application with pressure rating PN 10/16 |
| 13 | a)100mm Sluice Valve (Table.12.9) P.No.71 |
| 14 | b) 150mm Sluice Valve (Table.12.9) P.No.71 |
| 15 | Supply delivery and fixing of DI Specials including labour charges etc., complete as per standard specifications |
| 16 | a) 150mm dia CID Joint (Class 20) |
| 17 | b) 100mm dia CID Joint (Class 20) |
| 18 | c) 100mm dia DI Elbow |
| 19 | d) 100mm dia DI Tee |
| 20 | e) 100mm dia DI End Cap |
| 21 | f) 100mm dia DI Flanged Bend |
| 22 | Removal of Excavated Excess Earth away from the site to 2K.M including loading and transportation charges etc, complete as per standard specification.For 1M3 |
| 23 | Refilling witn excaved earth other than soil including consoldation and ramming the filling soil complete complying with standard specifications. TWAD SOR 2022-2023, P.No.295 |
| 24 | Supply and Fixing RCC Pre Cast Slab RCC 1:1.5:3 mix (one cement, one and half sand & three course aggregate) using 20mm gauge hand broken/ and broken granite stone for all RCCitemsof works excluding centering shuttering and cost of reinforcement but including curing etc.,complete and alsoincluding fixingfan clamps and fixtures in rccworkswherever necessary as directed by departmentalofficer etc., complete. |
| 25 | Suppling and fabricating and placing in position MS(or) R.T.S. bar for reinforcement to all RCC works as per the design given including cost ofsteel and binding wire also in all floors. |
AI Tender Summary
Tender Timeline
Jun 19, 2023
11:30 IST
Tender Published
Tender notice published.
Completed
Jun 19, 2023
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Completed
Jun 20, 2023
18:00 IST
Corrigendum-2 Issued
Clarifications on tender conditions and amendments issued.
CompletedJun 20, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJun 20, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender