|
| 1 | Earth work in excavation in foundation trenches, column foundation and pits in hard Soil within an initial lift of 1.5m including dressing the sides and levelling the bed & depositing the excavated materials away from the site within an initial lead of 50 Mincluding cost of dewatering, cost of all labour, sundries, Tools & plants etc. complete as per direction of Engineer-in-charge. |
| 2 | Supplying & Filling foundation trenches and plinth with fine course sand including watering ramming ect. including cost, conveyance,royalties, loading and inloading of all materials and all labour for work including scaffolding, watering and curing, sundries, T&P etc. complete as per the direction of the Engineer-in-charge. |
| 3 | Cement concrete of proportion (1:3:6) in foundation and floors using 4cm (3/2”) size clean hard blackCrusher broken granite stone metal of approved quality and from approved quarry including hoisting, lowering and laying concrete in layers not exceeding 15cm (6”) thick to the required level, ramming, wateringandcuringetc. complete including cost and conveyance of all materials with royalties and all labour with T&P required for the work etc. complete including dewatering if required. |
| 4 | Providing Fly Ash brick masonry work inFoundation and plinth using (250mm x 120mm x 80mm ) size having crushing strength not less than 75Kg / Sqcm with dimensional tolerance + percent in cement mortar (1:6)in Foundation and plinth for brick masonrywallsafter immersing the bricks for minimum 6 hours in water before use with all necessary projections, splays cutting, circular moulding, corbelling etc as per drawings including cost, conveyance, allroyalties, loading and unloading of all materials and all labour for work including scaffolding, watering and curing, sundries, T&P etc. complete as per the direction of the Engineer-in-charge. |
| 5 | Providing, lifting, hoisting and laying Reinforced cement concrete of M-20 grade with 20mm and down grade C.B chips in following items as per approved designs and drawings having a minimum compressive strength (in work test) 200 Kg. / Square cm. in 15 cm. cubes at 28 days after mixing and test conducted in accordance with I.S. 516 using 10 mm. to 20 mm. size black hard crushed broken granite stone chips and screened and washed sharp sand for mortar of approved quality from approved quarry, washed andcleaned ( 20mm. size chips not to exceeds 25 % ) to be mixed in concrete mixture with Portlandslag cement (PSC) including hoisting, lowering, laying and compaction concrete by using vibrators, watering and curing for 28 days, centering and shuttering then after dismantling and removing debris from the work site and finishing the exposed surface smooth providing grooves or beads wherever necessary including cost, conveyance, loading, unloading, royalties of all materials and cost of all labours, sundries, T & P required of the work etc. complete in all respect as directed by the Engineer-in-Charge. But excluding cost and conveyance of M.S. rods or Tor steel and binding wires and labour charges for straightening, cutting, bending etc. of M.S. rods or tor steel tying the grills and placing in proper position. |
| 6 | Column Footing |
| 7 | Plinth Band |
| 8 | Column Shaft |
| 9 | Lintel |
| 10 | Chajja (0.065 mt Avg. thick) |
| 11 | Roof Beam |
| 12 | Roof Slab |
| 13 | Supplyingand Straightening bent up or coiled rods, cutting, bending, crancking hooking welding or jointing(if required) theTor Steel of SAIL/RINL/TATA/JINDAL/SHYAM STEEL make with binding wires and binding tying the grills, hoisting, lowering & placing in proper position as required for all types of R.C.C. works includingcost, conveyance ofsteel and binding wire of of 18 to 20 gauge and labour with T & P required for the worketc. complete in all floors (weight of binding wires will not be consideredfor payment , and payment will be made on weight ofTor Steel Only. |
| 14 | Providing Fly Ash brick masonry work inSuperstructure using (250mm x 120mm x 80mm ) size having crushing strength not less than 75Kg / Sqcm with dimensional tolerance + percent in cement mortar (1:6)in Super Structurefor brick masonrywallsafter immersing the bricks for minimum 6 hours in water before use with all necessary projections, splays cutting, circular moulding, corbelling etc as per drawings including cost, conveyance, allroyalties, loading and unloading of all materials and all labour for work including scaffolding, watering and curing, sundries, T&P etc. complete as per the direction of the Engineer-in-charge. |
| 15 | Providing 2.5 cmthick grading concrete(1:2:2) on roof slab with 4.7 sizeH.G. Crusher chips mixing with admixture such as ploysulphide chemical compound including cost, conveyance ,royality ofall materials and cost of alllabour, T&P etc. complete as per specification & direction ofE.I.C. |
| 16 | Providing 12mm thick cement plaster to the surface of brick masonry wall in cement mortar (1:6) including racking out joints, scraping and cleaning the surface and finishing the plaster surface smooth using wooden floats only to proper plumbs and level and making grooves, beads and drip coarse to give required ornamental finish as per drawings including cost of all materials, conveyance, Royality,loading and unloading, all labour, scaffolding, watering and curing, sundries and T&P etc. complete as per direction of the Engineer-in-charge. |
| 17 | Providing 16mm thick cement plaster to the surface of brick masonry wall in cement mortar (1:6) including racking out joints, scraping and cleaning the surface and finishing the plaster surface smooth using wooden floats only to proper plumbs and level and making grooves, beads and drip coarse to give required ornamental finish as per drawings including cost of all materials, conveyance, Royality,loading and unloading, all labour, scaffolding, watering and curing, sundries and T&P etc. complete as per direction of the Engineer-in-charge. |
| 18 | Supplying and fixingof M.S door, Window with grills made out of M.S Angle frame, M.S Flat, sheet etc ofapproved quality and design to windows and openings & stair case railing and parapet railings etc. including making holes in walls and RCC structures or wood work etc. in proper position making good the damages of walls or RCC or other structures complete including mending or cutting sizes or grooves in choukaths with cost and conveyance of all materials, labour with T&P required for the work and royalties etc. complete ( including screws)in all respect in all floors. |
| 19 | 2.5 cm thick Artificial Stone flooring with cement concrete (1:2:4) including punning using 12mm size hard crusher broken granites chips etc. including cost of all materials, conveyance, Royality,loading and unloading, all labour and T&P etc. complete as per direction of the Engineer-in-charge. |
| 20 | Finishing plastered surface with wall cement based wall putty (water based) to receive primer etc including cost, conveyances, ofwall cement putty & all materials and cost of all labour with T&P etc, complete as per specification & direction of Engineer-in-charge. |
| 21 | Painting two coat with any approved enamel paint over a coat of Priming of approved colour, shade to iron surfacesincluding sand papering, polishing the surface, cost, conveyanceofall materials such as anamel paint, primeretc and cost of alllabour, T&P etc. complete as per specification & direction ofE.I.C. |
| 22 | Painting 2 (two) coats with any approved colour weather coatover a coat of primer to out side surface of wallof approved shade and quality etc including all cost of weather coat, Primer, conveyance, , all labour T&P etc complete as per direction of Engineer -in- charge. |
| 23 | Wall painting two coat with P.E paint over a coat of primerof approved shade on new work to give an even shade including cost conveyanceP.E Paint,Primerand all materials labour & T&P require for the work etc. complete as directed by E.I.C. |
