Tender For Repair And Maint Of Otm Buildings In Technical Area At Afs Kumbhirgram
Tender Value
9 Lakhs
Estimated cost
Bid Submission
20 Jun 2023
0 days left
EMD
18000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
kumbhirgram → Assam
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Repair And Maint Of Otm Buildings In Technical Area At Afs Kumbhirgram
BOQ
| Sl. No. | Item Description |
| 1 | Taking down aluminium door with chowkhat with all fittings and fixtures exc 1.5 Sqm but n.exc 4 Sqm complete all as specified and directed. |
| 2 | S&F powder coatedanodised aluminium frame for doors, windows, ventilators with one or more rebates including jointing cleat for fixing etc complete all as specified and as directed. |
| 3 | M&L for powder coated anodized aluminium partly paneled and partly glazed door shutter having top rail of section 85.00mmx44.45mmx2.00mm, bottom rail of section 85.00mmx44.45mmx2.00mm thick, door verticals of section 44.45mmx44.45mmx2.00mm thick and lock rail of section 85.00mmx44.45mmx2.00mm thick with aluminium anodized chowkats of section 63.50mmx33.10mmx2.50mm thick including necessary jointing cleats, glazing clips, rubber packing, snap beading, screws, handle and brass mortice lock 4 lever etc. fitted with 12mm thick pre laminated particle board, interior grade pre laminated with decorative face laminations both sides on bottom panel and 5.5 mm thick clear / frosted glass as required on top panel complete all as specified and as directed. |
| 4 | Refixing anodised aluminium door shutters, any type after repair, tightening screws with necessary joining cleats and fixing with proper alignment for easy/ smooth movement in same opening or other opening ,complete all as specified and directed.Note:Necessary glass with with rubber packing,particle board panelwith anidised beading and builders hardware shall be measured and paid separately. |
| 5 | S&F powder coated anodised aluminium window and ventilator shutters, fixed type without sash bars, aluminium sections weighing 0.55 kg/m including necessary jointing cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittingsand 4.0 mm thick clear / frosted glass as required complete all as specified and directed. |
| 6 | Taking down aluminium door with chowkhat with all fittings and fixtures not exc 1.5 Sqm each complete all as specified and directed. |
| 7 | Refixing anodised aluminium window or ventilator shutters, any type afterrepair, tightening screws with necessary joining cleats and fixing with proper alignment for easy/ smooth movement in same opening or other opening ,complete all as specified and directed.Note:Necessary glass with with rubber packing and builders hardware shall be measured and paid separately. |
| 8 | M&L for 12 mm thick pre laminated particle board fixed with aluminium snap beading to aluminium door frame complete all as specified and directed |
| 9 | Hacking out old broken glass with rubber packing(any thickness, size, quality or description)from aluminium frame complete all as specified and directed. |
| 10 | S&F 5.50 mm thick tinted sheet glass ordinary quality and glazing with rubber packing in aluminium door/window frame in square exc 0.5 Sqm in each pane including, complete all as specified and directed. |
| 11 | Supply and fix 3mm thick Sheet glass, ordinaly quality and glazing with rubber packing in aluminium window/ventilator frame as required in square n exc 0.5 sqm in each pane |
| 12 | Supply and fix Aluminium anodized barrel tower bolts of extruded section, 200 mm long all as specified and directed. |
| 13 | Supply and fix Aluminium anodized barrel tower bolts of extruded section, 150 mm long all as specified and directed. |
| 14 | S&F in double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminum alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts of mild steel heavy duty and fixed all as specified and directed. |
| 15 | S&F in repair mortice lock, brass, 4 levers type, size 100mm complete all as specified and as directed. |
| 16 | S&F in repair floor door stopper of aluminum alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor(Overall length of cover plate 140mm) , complete all as specified and directed. |
| 17 | S&F in repair hat pegs and hooks of aluminium, solid body,125mm to 175 mm, complete all as specified and directed. |
| 18 | S&F in repair stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples,complete all as specified and directed. |
| 19 | S&F in repair aluminium Die cast body Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and as directed |
| 20 | S&F PVC Eaves board 250 mmwidth, 18 mm thick, jointing with solvent cement andfixed with stainless steel screw complete all as specified and directed. |
| 21 | Dismantling of wall and ceiling boards (fibre, pulp, insulation etc) or insulation boards/slabs of any thickness including cover fillets complete all as specified and directed. |
| 22 | S&F interlocking aluminium power coatedsnap grid for false ceiling of grid size 605mmx605mm consists ofanodised aluminium main/cross Tee of size 40mmx25mmx2mm, weighing 0.36kg/RM,confirming to IS 733, IS 737& IS 1285. The main and cross Tee shall be jointed at junction/crossing with anodised aluminium angle bracket of 15mmx15mmx1.5mm, weighing 0.12KG/RM, fixed with suitable mild steel nut bolt & washers, snap grid frame work shall be fixed to ceiling with supporting hanger 6mm dia GI(upto 1200mm length) adjusting level fixed to roof slabs/truss by means of cleats made out of GI flat 40x3 mm size 60 mm long and expension hold fasteners 12.5 mm dia. 40 mm long complete all as manufacturer instruction fixed as specified. |
| 23 | M&L for Non Asbestos fibre cement building boards 4 mm thick fixed or laid in aluminium frame work with screws as in ceiling complete all as specified and as directed |
| 24 | Taking down cement plaster on brick or stone walls, etc including raking out joints, hacking for key, scrubbing down with water complete all as specified and directed. |
| 25 | M&L for rendering 15 mm thick in cement mortar (1:4) on fair faces of brick work or concrete surfaces,finished even and smooth (without using extra cement) including mixing of LW+@200ml/50Kg of cementcomplete all as specified and directed.Note:-Supply only LW+ shall be measured and paid separately. |
| 26 | M&L for rendering 10 mm thick in cement mortar (1:6) on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cementcomplete all as specified and directed. |
| 27 | Supply only LW+ ISI Marked of make:Dr Fixit of M/s M/s Pidilite Industries. |
| 28 | Supply and fix in repair bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed, 15mm complete all as specified and directed. |
| 29 | S&F in repair 15mm bore pillar taps cast copper alloy with capstan heads chromium plated screwed down high pressure with or without lettered \"HOT\" or \"COLD\" with long screwed shanks and fly nuts screwed for iron pipe and fixed complete all as specified and directed. |
| 30 | S&F in repairs stop valve 15 mm dia cast copper alloy chromium platedwith crutch or butter fly handles screwed down for iron pipe or for brass ferrule complete all as directed. |
| 31 | S&F in repairs stop valve concealed with flange15 mm dia cast copper alloy chromium plated, fancy typewith crutch or butter fly handles screwed down for iron pipe or for brass ferrule complete all as directed. |
| 32 | S&F in repairs angle cock with flange 15 mm dia cast copper alloy chromium plated, fancy typescrewed down for iron pipe or for brass ferrule complete all as directed. |
| 33 | S&F in repairs waste fittings, brass, chromium plated for glazed ware sinks, basins, etc with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed. |
| 34 | S&F in repair PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed . |
| 35 | Dismantling floor, hearth and wall tiling including cement mortar bedding (but excluding backing), removing rubbish off the premises complete all as specified and directed. |
| 36 | M&L for non skid ceramic joint free colouredtiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement including 15 mm thick screed bed or bedding layer in cement mortar (1:6) complete all as specified anddirected. |
| 37 | S&F for glazed ceramic coloured/printed tiles of size 300x200x6 to 7 mm thick as in vertical surfaces such as skirting, dados over and including 10 mm thick screedin cement mortar (1: 4) complete all as specified and directed. |
| 38 | S&F in repair galvanized mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanised wire staples complete all as specified and directed. |
| 39 | M&L for chequered cement concrete tiles 30cm x 30cm x 20mm thick with grey cement and pigment, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of tiles over and including 15 mm thick screed bed or bedding layer in cement mortar (1:6) complete all as specified anddirected. |
| 40 | S&F in repairs bib taps 15 mm dia cast copper alloy chromium plated, fancy type with crutch or butter fly handles screwed down for iron pipe or for brass ferrule complete all as directed. |
| 41 | S&F in repair vitreous china wash hand basin white, flat back of size 580x450mmincluding brackets, waste coupling, PVC waste pipe complete all as specified and directed. |
| 42 | S&F in repair vitreous china bowl urinal flat back, size of 465x355x265mm white (minimum), with grating and union for discharge pipe(excluding flushing cistern, flush pipe and waste pipe), including providing and securing urinal to plugs with and including 60mm long brass screws , pointing around urinal back in cement, complete all as specified and directed. |
| 43 | S&F in repair urinal spreader of PTMT any colour for fixing with 15mm dia pipe(minium weight 60gms) complete all as specified and directed . |
| 44 | S&Fin repair PVC low level flushing cistern, pastel coloured, 10 ltrs capacity, valveless, syphonic action type including all fittings and flush pipe, PVC connection pipe all as specified and directed. |
| 45 | Demolition of cement concrete (unreinforced) in ground floor and pavings not exc 15 cm thickness (below or above ground level)complete all as specified and directed. |
| 46 | M&L for 75mm thick plain cement concrete (1:3:6) type C2 using 40mm graded crushed stone aggregate as in path, hardstanding etc., finishing surfaces even and smooth without using extra cement, complete all as specified and directed. |
| 47 | M&L for PCC (1:2:4) type B0 (using 12.5 mm graded crushed stone aggregate)as incoping,benching,plinth courses seismic and other similar bands, hold fast bed, filling hollow spaces etc., complete all as specified and directed. |
| 48 | Demolition of brick/stone massonry work built in cement mortar as in wall including all quoins, arches, pillars etc complete all as specified and directed. |
| 49 | M&L for brick work with sub class ‘B’ bricks (locally available best quality) straight or curved on plan to any radius built in cement mortar (1:4) as in half brick thick wall complete all as specified and directed. |
| 50 | Taking up or down 15 mm bore GI tubing and connections including cleaning for re-fixing complete all as directed. |
| 51 | Fixing only old serviceable GI tubing 15 mm bore, medium grade with all new fittings and fixedto walls and ceilings or laid in floors complete all as specified and directed. |
| 52 | S&F GI tubing 15 mm bore, medium grade with all fittings such as bends, elbows, nipples, sockets, tees, unions, short pieces etc. and fixedto walls and ceilings or laid in floors complete all as specified and directed. |
| 53 | Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 for concealed water tubing and making good, cutting not exc 10cm girthcomplete all as specified and directed. |
| 54 | M&L for PVC(SWR) floor trap/Nahani trap, plain with grating including jointing with solvent cement, 75mm, complete all as specified and directed. |
| 55 | Supply and fix in repairsink with drainage board made of stainless steelsheet 1mm thick for kitchen or laboratory with plugs, washers and wastes, including bedding in cement mortar to dwarf wall or including fixing cantiliver brackets and connecting union to pipe overall size 915mmx460mm bowl size 410mmx330mmx160mm ,complete all as specified and directed. |
| 56 | Supply and fix in repair CP health faucet with 1 mtr tube and hook for EWC, complete all as specified and directed. |
| 57 | Dismantling of plain or corrugated steel sheeting any gauge/thickness in roof or wall covering complete all as specified and directed. |
| 58 | M&L for closing bolt holes etc. in old corrugated steel sheets or Aluminium sheeting by bsealing with one bitumen and one curved GI washer on either side and 6mm GI bolts and nuts, all set in stiff white lead, bolt n exc 25mm in length complete all as specified and directed. |
| 59 | Fixing only galvanised corrugated MS sheeting of any type and grade with two corrugation side laps fixed with \"L\" or \"J\" hooks and washers in roofs complete all as specified and as directed |
| 60 | S&F Corrugated galvanized steel sheeting 0.63mm thick ( 275 gram galvanization per Sqm) with two corrugation side laps and fixed with L type or J type hooks or cranked hook bolts and washers in roof/wall etc complete all as specified and directed. |
| 61 | S&F plain galvanized steel sheeting 0.80mm thick ( 275 gram galvanization per Sqm)as in ridges, hips and valley gutters complete all as specified and directed. |
| 62 | S&F fibre glass reinforced translucent corrugated sheeting 2mm thick with two corrugation side lap fixed with J type screw and washer in roof complete all as specified and directed. |
| 63 | S & Fpre - painted galvalume aluminium zinc coating (AZ 150) GI based plain steel sheet eaves gutter, 610mm width box shape with round edges, 0.50 mm thick of an colour as specified and as directed. |
AI Tender Summary
Tender Timeline
Jun 08, 2023
11:30 IST
Tender Published
Tender notice published.
CompletedJun 20, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJun 22, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender