Health And Family Welfare Department has published Tender For Supply Of Ortho Implant Part-3- Interference Bio Screw Size 9Mm X 35Mm (75% Plla & 25% Ha),Interference Bio Screw Size 10Mm X 20Mm (75% Plla & 25% Ha),Interference Bio Screw Size 10Mm X 25Mm (75% Plla & 25% Ha),Interference Bio Screw Size 10Mm. Submission Date for this Tender is 26-06-2023. Brooms and Mops Tenders in Porbandar Gujarat. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Title | Specification |
| 1 | Interference Bio screw size 9mm x 35mm (75% PLLA & 25% HA) | - |
| 2 | Interference Bio screw size 10mm x 20mm (75% PLLA & 25% HA) | - |
| 3 | Interference Bio screw size 10mm x 25mm (75% PLLA & 25% HA) | - |
| 4 | Interference Bio screw size 10mm x 30mm (75% PLLA & 25% HA) | - |
| 5 | Interference Bio screw size 10mm x 35mm (75% PLLA & 25% HA) | - |
| 6 | Interference Bio screw size 11mm x 25mm (75% PLLA & 25% HA) | - |
| 7 | Interference Bio screw size 11mm x 30mm (75% PLLA & 25% HA) | - |
| 8 | Interference Bio screw size 11mm x 35mm (75% PLLA & 25% HA) | - |
| 9 | Interference Bio screw size 12mm x 35mm (75% PLLA & 25% HA) | - |
| 10 | Pelvic C-Clamp Set : Vario Case for Pelvic C- Clamp, With Lid Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
| 11 | Pelvic C-Clamp Set : Bottom, For Vario Case Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
| 12 | Pelvic C-Clamp Set : Tray for Instruments for Vario Case Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
| 13 | Pelvic C-Clamp Set : Guide Handle for 2.5mm K-Wire Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
| 14 | Pelvic C-Clamp Set : Pelvic C-Clamp, Complete Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
| 15 | Pelvic C-Clamp Set : Pelvic C-Clamp Set : Ratchet Wrench for Nut, Hexagonal, 11.0mm ( 2 Units ) Made of Stainless steel Grade - ISO 5832-1 should be CE | - |
| 16 | Pelvic C-Clamp Set : Wire Cutter, Large, With Multiplication, Length 220mm Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
| 17 | Pelvic C-Clamp Set : Socket Wrench Ø 11.0mm With Hammer Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
| 18 | Pelvic C-Clamp Set : Nail for Pelvic C-Clamp, Cannulated, Short, Length 190mm, Stainless Steel ( 2 Units) Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
| 19 | Pelvic C-Clamp Set : Nail for Pelvic C-Clamp, Cannulated, Long, Length 210mm, Stainless Steel (2 Units ) Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
| 20 | Pelvic C-Clamp Set : K - Wire Ø 2.5mm With Trocar Tip, Length 280mm, Stainless Steel, Pack of 10 Units Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
| 21 | Pelvic C-Clamp Set : Pliers, Flat Nosed Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
| 22 | Pelvic C-Clamp Set : Cap for Carbon Fiber Rods Ø 8.0mm Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
| 23 | Collinear Reduction Clamp Set: Insert for Collinear Reduction Clamp Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
| 24 | Collinear Reduction Clamp Set: Collinear Reduction Clamp With Sliding Mechanism Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
| 25 | Collinear Reduction Clamp Set: Combination Wrench Ø 8.0mm Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
| 26 | Collinear Reduction Clamp Set: Hohmann-Shape Arm for Collinear Reduction Clamp Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
| 27 | Collinear Reduction Clamp Set: Pelvic Arm for Collinear Reduction Clamp Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
| 28 | Collinear Reduction Clamp Set: Percutaneous Arm for Collinear Reduction Clamp Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
| 29 | Collinear Reduction Clamp Set: Bone Hook - Shape Arm for Collinesr Reduction Clamp Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
| 30 | Collinear Reduction Clamp Set: Combination Wrench Ø 13.0mm Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
| 31 | Collinear Reduction Clamp Set: K-Wire Ø 2.6mm with Spade Point Tip, Length 500mm ( 5 Units ) Made of Stainless steel Grade - ISO 5832-1 should be CE | - |
| 32 | Collinear Reduction Clamp Set: Spiked Disc for Pelvic Reduction Forceps Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
| 33 | Reduction Instruments, Large : Tray for Reduction Handles Large, Toothed & Rounded Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
| 34 | Reduction Instruments, Large : Lid for Modular Tray Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
| 35 | Reduction Instruments, Large : Guide Wire Ø 1.6mm with Threaded Tip with Trocar, Length 410mm, Stainless Steel ( 4 Units ) Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
| 36 | Reduction Instruments, Large : Guide Wire Ø 2.8mm with Threaded Tip with Trocar, Length 300mm, Stainless Steel ( 4 Units ) Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
| 37 | Reduction Instruments, Large : Allen Key , Angled, Ø 3.5mm Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
| 38 | Reduction Instruments, Large : Combination Wrench Ø 11.0mm Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
| 39 | Reduction Instruments, Large : Reduction Handle, Toothed for Threaded Rod Ø 5.0mm ( 2 Units ) Made of Stainless steel Grade - ISO 5832-1 should be CE | - |
| 40 | Reduction Instruments, Large : Reduction Handle, Rounded for Guide Wire Ø 2.8mm ( 2 Units ) Made of Stainless steel Grade - ISO 5832-1 should be CE | - |
| 41 | Reduction Instruments, Large : Protection Sleeve, 11.0 Slotted Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
| 42 | Reduction Instruments, Large : Drill Sleeve, 11.0/2.8 Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
| 43 | Reduction Instruments, Large : Drill Sleeve, 5.0/1.6 Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
| 44 | Reduction Instruments, Large : Drill Sleeve, 11.0/5.0 Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
| 45 | Reduction Instruments, Large : Tap, Ø 5.0/1.6mm, Cannulated, Self Drilling, Length 195mm, Stainless Steel Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
| 46 | Reduction Instruments, Large : Adjusting Nut for Threaded Rod Ø 5.0mm, Stainless Steel (2 Units ) Made of Stainless steel Grade - ISO 5832-1 should be | - |
| 47 | Reduction Instruments, Large : Threaded Rod, Ø 5.0mm with Self Drilling Tip, Length 380mm, Stainless Steel (4 Units) Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
| 48 | Reduction Instruments, Large : Threaded Rod, Ø 5.0/1.6mm, Blunt Tip, Cannulated, Length 335mm, Stainless Steel (2 Units) Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
| 49 | Reduction Instruments, Large : Combination Clamp, Clip-on Self Holding ( 2 Units ) Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
| 50 | Reduction Instruments, Large : Carbon Fibre Rod, Ø 11.0mm, Length 250mm Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
| 51 | Reduction Instruments, Large : Carbon Fibre Rod, Ø 11.0mm, Length 350mm Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
| 52 | Reduction Instruments, Large : Peri Articular Reduction Forceps, Large with Spherical Tip Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
| 53 | Reduction Instruments, Small : Tray for Reduction Handles Small, Toothed & Rounded Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
| 54 | Reduction Instruments, Small : Lid for Modular Tray Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
| 55 | Reduction Instruments, Small : Guide Wire Ø 1.6mm with Threaded Tip with Trocar, Length 150mm, Stainless Steel ( 4 Units ) Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
| 56 | Reduction Instruments, Small : Allen Key , Angled, Ø 3.5mm Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
| 57 | Reduction Instruments, Small : Allen Key Small , Angled, Ø 2.5mm Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
| 58 | Reduction Instruments, Small : Reduction Handle, Toothed for Threaded Rod Ø 3.0mm ( 2 Units ) Made of Stainless steel Grade - ISO 5832-1 should be CE | - |
| 59 | Reduction Instruments, Small : Reduction Handle, Rounded for Guide Wire Ø 1.6mm ( 2 Units ) Made of Stainless steel Grade - ISO 5832-1 should be CE | - |
| 60 | Reduction Instruments, Small : Protection Sleeve, 8.0 Slotted Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
| 61 | Reduction Instruments, Small : Drill Sleeve, 8.0/1.6 Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
| 62 | Reduction Instruments, Small : Drill Sleeve, 8.0/3.0 Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
| 63 | Reduction Instruments, Small : Adjusting Nut for Threaded Rod Ø 3.0mm, Stainless Steel (2 Units ) Made of Stainless steel Grade - ISO 5832-1 should be | - |
| 64 | Reduction Instruments, Small : Threaded Rod, Ø 3.0mm with Self Drilling Tip, Length 270mm, Stainless Steel (4 Units) Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
| 65 | Reduction Instruments, Small : Combination Clamp Medium, Clip-on Self Holding ( 2 Units ) Made of Stainless steel Grade - ISO 5832-1 should be CE | - |
| 66 | Reduction Instruments, Small : Carbon Fibre Rod, Ø 8.0mm, Length 160mm Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
| 67 | Reduction Instruments, Small : Carbon Fibre Rod, Ø 8.0mm, Length 240mm Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
| 68 | Reduction Instruments, Small : Peri Articular Reduction Forceps, Medium with Spherical Tip Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
| 69 | Plate Insertion Instruments : Insert for Instrument Set for Minimally Invasive Plate Insertion Made of Stainless steel Grade - ISO 5832-1 should be CE | - |
| 70 | Plate Insertion Instruments : Combination Wrench Ø 8.0mm Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
| 71 | Plate Insertion Instruments : Combination Wrench Ø 11.0mm Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
| 72 | Plate Insertion Instruments : Soft Tissue Retractor, Small, Extendible Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
| 73 | Plate Insertion Instruments : Soft Tissue Retractor, Large, Extendible Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
| 74 | Plate Insertion Instruments : Blade, Long, Small, for Soft Tissue Retractor, Small, Extendible Made of Stainless steel Grade - ISO 5832-1 should be CE | - |
| 75 | Plate Insertion Instruments : Blade, Long, Large, for Soft Tissue Retractor, Large, Extendible Made of Stainless steel Grade - ISO 5832-1 should be CE | - |
| 76 | Plate Insertion Instruments : Plate Holder for MIPO Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
| 77 | Plate Insertion Instruments : Clamping Foot for LCP 3.5 & LC - DCP 3.5 Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
| 78 | Plate Insertion Instruments : Clamping Foot for Narrow LCP4.5/5.0 & for Narrow LC- DCP4.5 Made of Stainless steel Grade - ISO 5832-1 should be CE | - |
| 79 | Plate Insertion Instruments : Clamping Foot for Broad LCP4.5/5.0 & for Broad LC- DCP4.5 Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
| 80 | Plate Insertion Instruments : Connecting Screw for Plate Holder for MIPO Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
| 81 | Plate Insertion Instruments : Connecting Screw for LCP 3.5 Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
| 82 | Plate Insertion Instruments : Adjusting Nut for Connecting Screw for LCP 3.5 & 4.5/5.0 Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
| 83 | Plate Insertion Instruments : Connecting Screw for LCP 4.5/5.0 Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
| 84 | Shoulder Instruments for Shoulder Surgery : Vario Case for General Shoulder Instruments, With Lid Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
| 85 | Shoulder Instruments for Shoulder Surgery : Delta Retractor Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
| 86 | Shoulder Instruments for Shoulder Surgery : Delta Retractor, Pointed Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
| 87 | Shoulder Instruments for Shoulder Surgery : Ring Retractor, Delta Shaped Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
| 88 | Shoulder Instruments for Shoulder Surgery : Ring Retractor Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
| 89 | Shoulder Instruments for Shoulder Surgery : Ring Retractor, Narrow Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
| 90 | Shoulder Instruments for Shoulder Surgery : Bone Retractor, Humeral Head Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
| 91 | Shoulder Instruments for Shoulder Surgery : Ring Retractor, Drop Shaped Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
| 92 | Shoulder Instruments for Shoulder Surgery : Ring Retractor, Drop Shaped, Narrow Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
| 93 | Shoulder Instruments for Shoulder Surgery : Shoulder Spreader, Left Bend Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
| 94 | Shoulder Instruments for Shoulder Surgery : Shoulder Spreader, Right Bend Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
| 95 | Hohmann Retractor Holder Set : Holder for Hohmann Retractor Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
| 96 | Hohmann Retractor Holder Set : Bone Lever, Width 8mm, 30°, Curved, Left Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
| 97 | Hohmann Retractor Holder Set : Bone Lever, Width 8mm, 30°, Curved, Right Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
| 98 | Hohmann Retractor Holder Set : Bone Lever, Width 8mm, Length 220mm Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
| 99 | Hohmann Retractor Holder Set : Bone Lever, Width 18mm, Length 235mm Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
| 100 | Hohmann Retractor Holder Set : Bone Lever, Width 43mm, Length 240mm Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
| 101 | Hohmann Retractor Holder Set : Bone Lever, Width 70mm, Length 240mm Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
| 102 | Hohmann Retractor Holder Set : Bone Lever, Width 43mm, Length 235mm Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
| 103 | Hohmann Retractor Holder Set : Bone Lever, Width 22mm, Length 250mm Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
| 104 | Hohmann Retractor Holder Set : Bone Lever, Width 24mm, Length 270mm Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
| 105 | Intramedullary Reaming System : Vario Case for Intramedullary Reaming System, With Lid, Module & 2 Inserts Made of Stainless steel Grade - ISO 5832- 1 should be CE certified | - |
| 106 | Intramedullary Reaming System : T-Handle with Quick Coupling, Length 85mm Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
| 107 | Intramedullary Reaming System : Holding Forceps for Reaming Rod 2.5mm Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
| 108 | Intramedullary Reaming System : Removing Tool for Reamer Head Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
| 109 | Intramedullary Reaming System : Reaming Rod, Ø 2.5mm , Length 1150mm,3.5mm Olive ( 2 Units ) Made of Stainless steel Grade - ISO 5832-1 | - |
| 110 | Intramedullary Reaming System : Flexible Shaft, Ø 7.0mm, Reaming Depth to 470mm Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
| 111 | Intramedullary Reaming System : Cleaning Brush for 3.6mm Flexible Shaft, Length 600mm Made of Stainless steel Grade - ISO 5832-1 should be CE | - |
| 112 | Intramedullary Reaming System : Reduction Head, Straight Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
| 113 | Intramedullary Reaming System : Reduction Head, Displacement 2.5mm Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
| 114 | Intramedullary Reaming System : Reamer Head, Ø 8.5mm Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
| 115 | Intramedullary Reaming System : Reamer Head, Ø 9.0mm Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
| 116 | Intramedullary Reaming System : Reamer Head, Ø 9.5mm Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
| 117 | Intramedullary Reaming System : Reamer Head, Ø 10.0mm Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
| 118 | Intramedullary Reaming System : Reamer Head, Ø 10.5mm Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
| 119 | Intramedullary Reaming System : Reamer Head, Ø 11.0mm Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
| 120 | Intramedullary Reaming System : Reamer Head, Ø 11.5mm Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
| 121 | Intramedullary Reaming System : Reamer Head, Ø 12.0mm Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
| 122 | Intramedullary Reaming System : Reamer Head, Ø 12.5mm Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
| 123 | Intramedullary Reaming System : Reamer Head, Ø 13.0mm Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
| 124 | Instrument Set for the Removal of Damaged or Broken Screw : Extraction Module for 3.5mm / 4.0mm / 4.5mm Screw Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
| 125 | Instrument Set for the Removal of Damaged or Broken Screw : Screw Driver Shaft, T25, Length 100mm Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
| 126 | Instrument Set for the Removal of Damaged or Broken Screw : Hollow Reamer, Complete, Anti Clockwise Cutting, for Ø 3.5/4.0mm Screws Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
| 127 | Instrument Set for the Removal of Damaged or Broken Screw : Spare Reamer Tube, for Hollow Reamer, Complete, Anti Clockwise Cutting, for Ø 3.5/4.0mm Screws Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
| 128 | Instrument Set for the Removal of Damaged or Broken Screw : Exctraction Bolt, For Screw 3.5mm & 4.0mm Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
| 129 | Instrument Set for the Removal of Damaged or Broken Screw : Hollow Reamer, Complete, Anti Clockwise Cutting, for Ø 4.5mm Screws Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
| 130 | Instrument Set for the Removal of Damaged or Broken Screw : Spare Reamer Tube, for Hollow Reamer, Complete, Anti Clockwise Cutting, for Ø 4.5mm Screws Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
| 131 | Instrument Set for the Removal of Damaged or Broken Screw : Exctraction Bolt, For Screw 4.5mm & 5.0mm Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
| 132 | Instrument Set for the Removal of Damaged or Broken Screw : Conical Extraction Screw for 2.7mm / 3.5mm / 4.0mm Screw Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
| 133 | Instrument Set for the Removal of Damaged or Broken Screw : Extraction Screw for 3.5mm Screw Made of Stainless steel Grade - ISO 5832-1 should be CE | - |
| 134 | Instrument Set for the Removal of Damaged or Broken Screw : Conical Extraction Screw for 4.5mm / 6.5mm Screw ( 2 Units) Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
| 135 | Instrument Set for the Removal of Damaged or Broken Screw : T - Handle with Quick Coupling Made of Stainless steel Grade - ISO 5832-1 should be CE | - |
| 136 | Instrument Set for the Removal of Damaged or Broken Screw : Screw Driver Shaft, Hexagonal, Small, Ø 2.5mm Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
| 137 | Instrument Set for the Removal of Damaged or Broken Screw : Screw Driver Shaft, Stardrive, 3.5, T15, Self Holding, for AO/ASIF Quick Coupling Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
| 138 | Instrument Set for the Removal of Damaged or Broken Screw : Screw Driver Shaft, Hexagonal, Large, Ø 3.5mm Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
| 139 | Instrument Set for the Removal of Damaged or Broken Screw : Screw Driver Shaft, Hexagonal, Hexagonal Head 4mm, Length 100mm Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
| 140 | Instrument Set for the Removal of Damaged or Broken Screw : Screw Driver Shaft, T40, Length 100mm Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
| 141 | Instrument Set for the Removal of Damaged or Broken Screw : Hollow Reamer, Complete, Anti Clockwise Cutting, for Ø 5.0 / 6.0 / 6.5 / 7.0mm Screws Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
| 142 | Instrument Set for the Removal of Damaged or Broken Screw : Spare Reamer Tube, for Hollow Reamer, Complete, Anti Clockwise Cutting, for Ø 5.0 / 6.0 / 6.5 / 7.0mm Screws Made of Stainless steel Grade - ISO 5832-1 should be CE | - |
| 143 | Instrument Set for the Removal of Damaged or Broken Screw : Exctraction Bolt, For Screw 6.0 / 6.5 / 7.0mm Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
| 144 | Instrument Set for the Removal of Damaged or Broken Screw : Anodized, Alluminium Plate with Application Diagram for Instrument set for the Removal of Damaged or Broken Screw Made of Stainless steel Grade - ISO 5832-1 | - |
| 145 | Instrument Set for the Removal of Damaged or Broken Screw : Sharp Hook, Length 155mm Made of Stainless steel Grade - ISO 5832-1 should be CE | - |
| 146 | Instrument Set for the Removal of Damaged or Broken Screw : Pliers for Screw Removal, Length 205mm Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
| 147 | Instrument Set for the Removal of Damaged or Broken Screw : Gouge, Width 10mm Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
| 148 | Femoral Distractor Set : Sterilizing Tray for Instrument Set for Large Distractor Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
| 149 | Femoral Distractor Set : Drill Bit, 3.5mm dia., L 195/170mm for quick coupling (2 Units) Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
| 150 | Femoral Distractor Set : Drill Sleeve 5.0/3.5, long Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
| 151 | Femoral Distractor Set : Drill Sleeve 6.0/5.0, long Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
| 152 | Femoral Distractor Set : Combination Wrench, 11mm, L 140mm Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
| 153 | Femoral Distractor Set : Pin Wrench, Dia. 4.5 mm, length 120 mm Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
| 154 | Femoral Distractor Set : Universal Chuck with T-Handle, L 160mm Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
| 155 | Femoral Distractor Set : Trocar, Dia. 3.5 mm, long Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
| 156 | Femoral Distractor Set : Threaded Rod, 14.0mm dia., L 330mm Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
| 157 | Femoral Distractor Set : Threaded Rod, 14.0mm dia., L 480mm Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
| 158 | Femoral Distractor Set : Knurled Nut, thread 14mm dia. (3 Units) Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
| 159 | Femoral Distractor Set : Sliding Carriage with Adjusting Nut Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
| 160 | Femoral Distractor Set : Double Joint with Adjusting Nut Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
| 161 | Femoral Distractor Set : Holding Sleeve with Wing Screw, L 55mm (2 Units) Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
| 162 | Femoral Distractor Set : Holding Sleeve with Wing Screw, L 105mm (2 Units) Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
| 163 | Femoral Distractor Set : Schanz Screw, Dia. 5.0 mm, length 150/50 mm, Stainless Steel (4 Units) Made of Stainless steel Grade - ISO 5832-1 should be | - |
| 164 | Femoral Distractor Set : Schanz Screw, Dia. 5.0 mm, length 175/50 mm, Stainless Steel (4 Units) Made of Stainless steel Grade - ISO 5832-1 should be | - |
| 165 | Femoral Distractor Set : Schanz Screw, Dia. 5.0 mm, length 200/50 mm, Stainless Steel (4 Units) Made of Stainless steel Grade - ISO 5832-1 should be | - |
| 166 | F - Reduction Tool : F-Tool, Large (1xBar, 3xThreaded Rod) Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
| 167 | F - Reduction Tool : F-Tool, Small (1xBar of 335mm, 3xThreaded Rod of 128mm) Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
| 168 | Wire Instrument Set : Sterilizing Tray for General Instrument Set Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
| 169 | Wire Instrument Set : Drill Bit, Dia.2.0 mm, length 100/75 mm, 2-flute, for Quick Coupling Made of Stainless steel Grade - ISO 5832-1 should be CE | - |
| 170 | Wire Instrument Set : Triple Drill Guide 2.0 with 3 holes, opposite side 1 hole Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
| 171 | Wire Instrument Set : Holding Forceps for Cerclage Wires, L 170mm (2 Units) Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
| 172 | Wire Instrument Set : Wire Bending Pliers, L 155mm Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
| 173 | Wire Instrument Set : Parallel Pliers, flat nosed, L 160mm Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
| 174 | Wire Instrument Set : Wire Cutter, short, L 175mm Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
| 175 | Wire Instrument Set : Wire Cutter, large, L 220mm Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
| 176 | Wire Instrument Set : Wire Passer, 45mm bending diameter Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
| 177 | Wire Instrument Set : Wire Passer, 70mm bending diameter Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
| 178 | Wire Instrument Set : Wire Tightener with handle and two pegs, L 240mm Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
| 179 | Wire Instrument Set : Bending Iron, for Kirschner Wires 1.25 to 2.5mm dia., L 120mm Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
| 180 | Wire Instrument Set : Wire Mount for Periprosthetic Fracture (20 Units) Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
| 181 | Wire Instrument Set : Cerclage Wire, 1.0mm dia., with eye L 280mm (20 Units) Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
| 182 | Wire Instrument Set : Cerclage Wire, 1.25mm dia., with eye L 280mm (20 Units) Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
| 183 | Wire Instrument Set : Cerclage Wire, 1.50mm dia., with eye L 280mm (20 Units) Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
| 184 | Wire Instrument Set : Wire Coil, 1.0mm dia., L 10M (10 Units) Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
| 185 | Wire Instrument Set : Wire Coil, 1.25mm dia., L 10M (10 Units) Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
| 186 | Wire Instrument Set : Wire Coil, 1.50mm dia., L 10M (10 Units) Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
| 187 | Wire Instrument Set : Kirschner Wire, 1.0mm dia., with trocar tip, L 150mm (10 Packets) Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
| 188 | Wire Instrument Set : Kirschner Wire, 1.25mm dia., with trocar tip, L 150mm (10 Packets) Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
| 189 | Wire Instrument Set : Kirschner Wire, 1.60mm dia., with trocar tip, L 150mm (20 Packets) Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
| 190 | Wire Instrument Set : Kirschner Wire, 2.0mm dia., with trocar tip, L 150mm (10 Packets) Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
| 191 | Wire Instrument Set : Kirschner Wire, 2.5mm dia., with trocar tip, L 150mm (10 Packets) Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
| 192 | 2.4mm LCP Distal Radius System Instrument Set : Module for LCP Volar Distal Radius Plate 2.4, Extra Articular, with Lid Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
| 193 | 2.4mm LCP Distal Radius System Instrument Set : Module for LCP Volar Distal Radius Plate 2.4, Intra Articular, with Lid Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
| 194 | 2.4mm LCP Distal Radius System Instrument Set : Module for LCP Dorsal Distal Radius Plate 2.4, with Lid Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
| 195 | 2.4mm LCP Distal Radius System Instrument Set : Handle for Torque Limiters 0.4/0.8/1.2 Nm Made of Stainless steel Grade - ISO 5832-1 should be CE | - |
| 196 | 2.4mm LCP Distal Radius System Instrument Set : Torque Limitor 0.8 Nm Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
| 197 | 2.4mm LCP Distal Radius System Instrument Set : Pliers, Flat Nosed, Pointed, For Plates 1.0 to 2.4 Made of Stainless steel Grade - ISO 5832-1 should be CE | - |
| 198 | 2.4mm LCP Distal Radius System Instrument Set : Drill Bit B 1.8 mm, with marking, length 110/85 mm, 2-flute, ( 2 Units ) Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
| 199 | 2.4mm LCP Distal Radius System Instrument Set : Drill Bit B 2.0 mm, length 100/75 mm, 2-flute, for Quick Coupling, ( 2 Units ) Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
| 200 | 2.4mm LCP Distal Radius System Instrument Set : 2.4mm LCP Distal Radius System Instrument Set : Drill Bit B 2.4 mm, length 100/75 mm, 2-flute, for Quick Coupling, ( 2 Units ) Made of Stainless steel Grade - ISO 5832-1 should | - |
| 201 | 2.4mm LCP Distal Radius System Instrument Set : Drill Bit, 2.7mm dia., L 100/75mm for quick coupling, ( 2 Units ) Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
| 202 | 2.4mm LCP Distal Radius System Instrument Set : LCP Drill Sleeve 2.4, with Scale up to 30 mm, for Drill Bits B 1.8 mm ( 2 Units ) Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
| 203 | 2.4mm LCP Distal Radius System Instrument Set : 2.4mm LCP Distal Radius System Instrument Set : 2.4mm LCP Distal Radius System Instrument Set : Universal Drill Guide 2.4 Made of Stainless steel Grade - ISO 5832-1 should be | - |
| 204 | 2.4mm LCP Distal Radius System Instrument Set : Universal Drill Guide 2.7 Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
| 205 | 2.4mm LCP Distal Radius System Instrument Set : Depth Gauge for 2.0mm and 2.4mm Screws Made of Stainless steel Grade - ISO 5832-1 should be CE | - |
| 206 | 2.4mm LCP Distal Radius System Instrument Set : 2.4mm LCP Distal Radius System Instrument Set : Depth Gauge for Screws B 2.7 to 4.0 mm, measuring range up to 60 mm Made of Stainless steel Grade - ISO 5832-1 should be CE | - |
| 207 | 2.4mm LCP Distal Radius System Instrument Set : Screwdriver Stardrive 2.4, Short, Self Holding, For Quick Coupling Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
| 208 | 2.4mm LCP Distal Radius System Instrument Set : Screwdriver Stardrive , T8, self-holding Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
| 209 | 2.4mm LCP Distal Radius System Instrument Set : LCP Holding Sleeve 2.4 Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
| 210 | 2.4mm LCP Distal Radius System Instrument Set : Reduction Forceps with points, micro handle, softlock, Length 126mm Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
| 211 | 2.4mm LCP Distal Radius System Instrument Set : Reduction Forceps with points, wide, micro handle, softlock, Length 127mm Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
| 212 | 2.4mm LCP Distal Radius System Instrument Set : Termite Forceps, finely stepped ratchet lock, weight 15g, Length 90mm Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
| 213 | 2.4mm LCP Distal Radius System Instrument Set : Periosteal Elevator, slightly curved blade, straight edge, width 3 mm, Length 187/87 mm Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
| 214 | 2.4mm LCP Distal Radius System Instrument Set : Periosteal Elevator, round edge, 3mm wide, curved blade Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
| 215 | 2.4mm LCP Distal Radius System Instrument Set : Bone Lever, small, short narrow tip, width 6 mm, Length 160 mm Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
| 216 | 2.4mm LCP Distal Radius System Instrument Set : Bending Pliers for Plates 1.5 to 2.7, Length 140 mm Made of Stainless steel Grade - ISO 5832-1 should be | - |
| 217 | 2.4mm LCP Distal Radius System Instrument Set : K - Wire 1.6mm with Trocar Tip, Length 150mm, Stainless Steel, Pack of 10 Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
| 218 | 2.4mm LCP Distal Radius System Instrument Set : K - Wire 1.25mm with Trocar Tip, Length 150mm, Stainless Steel, Pack of 10 Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
| 219 | 2.4mm LCP Distal Radius System Instrument Set : Centring Sleeve for 1.25mm K - Wire Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
| 220 | 2.4mm LCP Distal Radius System Instrument Set : Handle with mini quick coupling Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
| 221 | 2.4mm LCP Distal Radius System Instrument Set : Screwdriver Shaft T8, self- retaining, with mini quick coupling Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
| 222 | General Instrument Set : Hammer 500 g Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
| 223 | General Instrument Set : Chisel Handle Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
| 224 | General Instrument Set : Bone Hook, sharp, small, length 230 mm Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
| 225 | General Instrument Set : Bone Hook, sharp, medium, length 230 mm Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
| 226 | General Instrument Set : Bone Lever, short narrow tip, width 8 mm, length 220 mm Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
| 227 | General Instrument Set : Bone Lever, short narrow tip, width 18 mm, length 235 mm Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
| 228 | General Instrument Set : Bone Lever, with long, wide tip, width 24 mm, length 270 mm Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
| 229 | General Instrument Set : Periosteal Elevator, curved shaft, round edge, width 14 mm, length 190/75 mm Made of Stainless steel Grade - ISO 5832-1 should be | - |
| 230 | General Instrument Set : Periosteal Elevator, slightly curved blade, round edge, width 6 mm, length 190/90 mm Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
| 231 | General Instrument Set : Periosteal Elevator, straight shaft, round edge, width 14 mm, length 202/80 mm Made of Stainless steel Grade - ISO 5832-1 should be | - |
| 232 | General Instrument Set : Chisel Blade, width 10 mm Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
| 233 | General Instrument Set : Chisel Blade, width 16 mm Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
| 234 | General Instrument Set : Chisel Blade, width 25 mm Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
| 235 | General Instrument Set : Gouge for Cancellous Bone Graft, curved, width 10 mm, length 265/125 mm Made of Stainless steel Grade - ISO 5832-1 should be | - |
| 236 | General Instrument Set : Hammer 100 g Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
| 237 | General Instrument Set : Hammer 300 g Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
| 238 | General Instrument Set : Hammer 700 g Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
| 239 | General Instrument Set : Chisel Blade, width 5 mm Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
| 240 | General Instrument Set : Periosteal Elevator, straight shaft, straight edge, width 13 mm, length 195/80 mm Made of Stainless steel Grade - ISO 5832-1 should | - |
| 241 | General Instrument Set : Periosteal Elevator, curved shaft, straight edge, width 13 mm, length 187/72 mm Made of Stainless steel Grade - ISO 5832-1 should | - |
| 242 | General Instrument Set : Periosteal Elevator, straight shaft, round edge, width 20 mm, length 202/80 mm Made of Stainless steel Grade - ISO 5832-1 should be | - |
| 243 | General Instrument Set : Periosteal Elevator, slightly curved blade, straight edge, width 3 mm, length 187/87 mm Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
| 244 | General Instrument Set : Periosteal Elevator, slightly curved blade, straight edge, width 6 mm, length 187/87 mm Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
| 245 | General Instrument Set : Gouge for Cancellous Bone Graft, straight, width 5 mm, length 265/125 mm Made of Stainless steel Grade - ISO 5832-1 should be | - |
| 246 | General Instrument Set : Gouge for Cancellous Bone Graft, straight, width 10 mm, length 265/125 mm Made of Stainless steel Grade - ISO 5832-1 should be | - |
| 247 | General Instrument Set : Gouge for Cancellous Bone Graft, straight, width 15 mm, length 265/125 mm Made of Stainless steel Grade - ISO 5832-1 should be | - |
| 248 | General Instrument Set : Gouge for Cancellous Bone Graft, curved, width 5 mm, length 265/125 mm Made of Stainless steel Grade - ISO 5832-1 should be | - |
| 249 | General Instrument Set : Gouge for Cancellous Bone Graft, curved, width 15 mm, length 265/125 mm Made of Stainless steel Grade - ISO 5832-1 should be | - |
| 250 | General Instrument Set : Bone Hook, sharp, large, length 200 mm Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
| 251 | General Instrument Set : Bone Lever, narrow tip, width 43 mm, length 240 mm Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
| 252 | General Instrument Set : Bone Lever, narrow tip, width 70 mm, length 240 mm Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
| 253 | General Instrument Set : Bone Lever, long blade, width 43 mm, length 235 mm Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
| 254 | General Instrument Set : Bone Lever, with wide tip, width 22 mm, length 250 mm Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
| 255 | General Instrument Set : Bone Lever, long narrow tip, width 18 mm, length 235 mm Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
| 256 | General Instrument Set : Humeral Head Lever, length 220 mm Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
| 257 | Large Fragment LCP Instrument : Torque limiting Screwdriver, Length 125 mm, for 3.5 mm Hexagonal Recess Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
| 258 | Large Fragment LCP Instrument : Drill bit ,3.5mm dia.(3 Units) Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
| 259 | Large Fragment LCP Instrument : Extraction Screw , Conical for 4.5/6.5 mm screw Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
| 260 | Large Fragment LCP Instrument : Drill bit ,4.3 mm dia, L 221 mm (3 Units) Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
| 261 | Large Fragment LCP Instrument : Screwdriver shaft 3.5,self retainibg, L 110mm Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
| 262 | Large Fragment LCP Instrument : Threaded LCP drill guide for 4.3mm drill bit (4 Units) Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
| 263 | Large Fragment LCP Instrument : Universal drill sleeve LCP 4.5/5.0 Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
| 264 | Large Fragment LCP Instrument : Screw holding sleeve for LCP 4.5/5.0 Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
| 265 | Large Fragment LCP Instrument : Guide sleeve for K-Wires, 2.0 mm dia (2 Units) Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
| 266 | Large Fragment LCP Instrument : LCP bending iron for reconstruction plates (2 Units) Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
| 267 | Small Fragment LCP Instrument : Torque Limiting attchment for LCP 3.5,1.5 Nm Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
| 268 | Small Fragment LCP Instrument : Drill bit 2.5mm dia,for metal (3 Units) Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
| 269 | Small Fragment LCP Instrument : Extraction Screw , Conical Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
| 270 | Small Fragment LCP Instrument : Drill bit 2.8 mmdia ,L 65 mm for Quick coupling (3 Units) Made of Stainless steel Grade - ISO 5832-1 should be CE | - |
| 271 | Small Fragment LCP Instrument : Screwdriver shaft 2.5,L 80 mm Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
| 272 | Small Fragment LCP Instrument : Screw Holding sleeve for LCP 3.5 Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
| 273 | Small Fragment LCP Instrument : Threaded LCP drill guide for 2.8mm drill bit (4 Units) Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
| 274 | Small Fragment LCP Instrument : Centering sleeve for 1.25 mm K-Wire (2 Units) Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
| 275 | Small Fragment LCP Instrument : LCP bending iron for reconstruction plates (2 Units) Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
| 276 | Small Fragment LCP Instrument : Handle with Quick Coupling Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
| 277 | Small Fragment LCP Instrument : Universal Drill sleeve LCP 3.5 Made of Stainless steel Grade - ISO 5832-1 should be CE certified | - |
| 278 | BONE CEMENT (USA FDA APPROVED),40GM,uses a 75 -15 -10 mix: 75% METHYMETHACRYLATE. | - |
| 279 | BONE CEMENT (USA FDA APPROVED),20GM,uses a 75 -15 -10 mix: 75% METHYMETHACRYLATE. | - |
| 280 | ARITHROMYCIN BONE CEMENT (USA FDA APPROVED),40GM,uses a 75 -15 -10 mix: 75% METHYMETHACRYLATE. | - |
| 281 | TOBRAMYCIN BONE CEMENT (USA FDA APPROVED),40GM,uses a 75 - 15 -10 mix: 75% METHYMETHACRYLATE. | - |
| 282 | MODULAR SHOULDER STEM WITH FINS ,SIZE:6,7,8 | - |
| 283 | MODULAR SHOULDER HEAD , SIZE:40X15,17,22, 40 X 15,17,20 | - |
| 284 | SS FLOWER SHAPE MEDIAL WALL ACETABULAR MESH WITH 3.5MM HOLES | - |
| 285 | 75%PLDLLA AND 25% BCP ACL FIXATION SYSTEM WITH MBCP TECHNOLOGY | - |
| 286 | ADJUSTABLE CORTICAL FIXATION SYSTEM FOR ACL AND PCL | - |
| 287 | NATURAL BONE CONTOURED FEMORAL NAIL WITH 12" OF ANTEVERSION IN PROXIMAL SCREWS, TITANIUM ALLOY, MORE THEN 10 YEARS OF CLINICAL DATA | - |
| 288 | PROXIMAL SCREWS FOR ABOVE NAIL, TITANIUM ALLOY TI6AL4VI,MORE THEN 10 Y OF CLINICAL DATA | - |
| 289 | DISTAL SCREWS FOR ABOVE NAIL, TITANIUM ALLOY TI6AL4VI, MORE THEN 10 Y OF CLINICAL DATA | - |
| 290 | END CAP FOR ABOVE NAIL, TITANIUM ALLOY TI6AL4VI | - |
| 291 | 4 ANTERIOR BEND AND ANATOMIC DELTA CROSS SECTION TIBIA NAIL WITH TRANSVERSE PROXIMAL LOCKING HOLE , TITANIUM ALLOY TI6AL4VI, MORE THEN 15 YEARS OF CLINICAL DATA | - |
| 292 | SCREWS FOR ABOVE NAIL, TITANIUM ALLOY TI6AL4VI, MORE THEN 10 YEARS OF CLINICAL DATA | - |
| 293 | END CAP FOR ABOVE NAIL, TITANIUM ALLOY TI6AL4VI | - |
| 294 | 4" PROXIMAL LATERIZATION ANGLE AND 15" ANTEVERSION WITH ANTERIOR BEVEL ON TIP PROXIMAL , SPIRAL FLUTE FEMORAL NAIL , TITANIUM TI6AL4VI, MORE THEN 10 Y OF CLINICAL DATA | - |
| 295 | PROXIMAL SCREWS WITH GROOVE FOR SET SCREW FOR ABOVE NAIL, TITANIUM ALLOY,MORE THEN 10 YOF CLINICAL DATA | - |
| 296 | DISTAL SCREWS FOR ABOVE NAIL, TITANIUM ALLOY TI6AL4VI, MORE THEN 10 Y OF CLINICAL DATA | - |
| 297 | END CAP FOR ABOVE NAIL, TITANIUM ALLOY TI6AL4VI | - |
| 298 | ANATOMIC DVR PLATE WITH PRE LOADED SLEEVE, TITANIUM ALLOY, MATCH TOPOGRAPHY OF DISTAL RADIUS,ITH TOPOGRMORE THEN 10 YEARS CLINICAL DATA | - |
| 299 | DVR PLATE LOCKING PEG TTIANIUM ALLOY, MORE THEN 10 YEARS CLINICAL DATA | - |
| 300 | DVR PLATE MULTIDIRECTION LOCKING PEG , MATERIAL : COCR, MORE THEN 10 YEARS CLINICAL DATA | - |
| 301 | DVR PLATE SHAFT SCREWS, MORE THEN 10YEARS CLINICAL DATA, TITANIUM ALLOY | - |
| 302 | 3.5MM PROXIMAL HUMERUS LATERAL LOCKING PLATE, LEFT/RIGHT, 4,6,8,12HOLE ,22Cr-13-Ni-5MN | - |
| 303 | 3.5MM PROXIMAL TIBIA LATERAL LOCKING PLATE, LEFT/RIGHT, 6,8,10,12 HOLE ,22Cr-13-Ni-5Mn | - |
| 304 | 3.5MM DISTAL TIBIA MEDIAL LOCKING PLATE, LEFT/RIGHT, 6,8,10,14 HOLE ,22Cr-13-Ni-5Mn | - |
| 305 | 3.5MM SELF DRILLING CANULATED METAPHYSEAL LOCKING SCREWS FOR ABOVE PLATES | - |
| 306 | 3.5 CONICAL LOCKING SCREW FOR ABOVE PLATES | - |
| 307 | 3.5MM CORTICAL SCREW FOR DUAL COMPRESSION,22Cr-13-Ni-5Mn ,FOR ABOVE PLATES | - |
| 308 | 5.5MM DISTAL FEMUR LATERAL LOCKING PLATE, LEFT/RIGHT, 6,10,14,18 HOLE ,22Cr-13-Ni-5Mn | - |
| 309 | 5.5MM SELF DRILLING CANULATED LOCKING SCREW,22Cr-13-Ni- 5Mn ,L=55,60..90MM | - |
| 310 | 4.5MM SHAFT LOCKING SCREW,22Cr-13-Ni-5MnL=16,18,..50MM | - |
| 311 | 4.5MM CORTICAL SCREW FOR DUAL COMPRESSION,22Cr-13-Ni-5Mn , L=16,18,..50MM | - |
| 312 | INBUILT IN FAULT DIAGNISTICS2 STATION CHARGER ,USA FDA APPROVED,220-240VOLTS | - |
| 313 | DRILLING/REAMING HAND PIECE , USA FDA APPROVED DRILL:825RPM, 40IN/LBS, REAMING:250RPM,105IN/LBS,DEDICATED, FORWARD/REVERSE/SAFE MODE FACILITY | - |
| 314 | SAGITAL SAW HAND PIECE,USA FDA APPROVED,11500CPM,NOISE LEVEL LESS THEN 73.6DB | - |
| 315 | TRANSFER SHIELD FOR POWER MODULE,USA FDA APPROVED | - |
| 316 | POWER MODULE, USA FDA APPROVED,LI-ION CHEMISTRY,12.6 VOLTS,>1.1AH CAPACITY | - |
| 317 | CASE FOR ABOVE SYSTEM | - |
| 318 | DRILLING CHUCK FOR ABOVE SYSTEM,USA FDA APPROVED, | - |
| 319 | REAMING CHUCK FOR ABOVE SYSTEM,USA FDA APPROVED, | - |
| 320 | QUICK COUPLING CHUCK FOR ABOVE SYSTEM,USA FDA | - |
| 321 | HUDSON MODIFIED TRINKLE CHUCK FOR ABOVE SYSSTEM,USA FDA APPROVED, | - |
| 322 | WIRE COLLET CHUCK FOR ABOVE SYSTEM,USA FDA APPROVED,.71 TO 1.8MM | - |
| 323 | PIN COLLET SMALL FOR ABOVE SYSTEM,USA FDA APPROVED,2.0 TO 3.2MM | - |
| 324 | PIN COLLET LARGE FOR ABOVE SYSTEM,USA FDA APPROVED,3. TO 4.2MM | - |
| 325 | TOTAL KNEE REPLACEMENT WITH PATELA | - |
| 326 | TOTAL KNEE REPLACEMENT WITHOUT PATELA | - |
| 327 | TOTAL HIP REPLACEMENT CEMENTED | - |
| 328 | TOTAL HIP REPLACEMENT UNCEMENTED | - |
| 329 | TOTAL HIP REPLACEMENT ACETABULUM CEMENTED WITH FEMORAL STEAM UN CMENTED | - |
| 330 | TOTAL HIP REPLACEMENT ACETABULUM UNCEMENTED WITH FEMORAL STEAM UN CMENTED | - |
| 331 | Leg -O Drape | - |
| 332 | Hip Drape | - |
| 333 | stockinate 2" | - |
| 334 | Stockinate 4" | - |
| 335 | Soft Roll | - |
| 336 | Ioban skin drape | - |
| 337 | Ioban | - |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
