Bids Are Invited For Renovation Work ( Q3 ) 1 Providing And Placing Of Visitor Chair. Seat Size Shall Be 600Mm(W) X 600(D) X 520Mm (H). Backrest Size Shall Be 550Mm(W) X 350Mm(H). Arm Material: Wooden, Size Of The Armrest- 25Mm(W) X 450Mm(L). The , Delhi-Delhi

Bids Are Invited For Renovation Work ( Q3 ) 1 Providing And Placing Of Visitor Chair. Seat Size Shall Be 600Mm ( W ) X 600 ( D ) X 520Mm ( H ) . Backrest Size Shall Be 550Mm ( W ) X 350Mm ( H ) . Arm Material: Wooden, Size Of The Armrest- 25Mm ( W ) X 450Mm ( L ) . The Seat Shall Be Made Of Pu Foam Covered With Leatherette. The Thickness Of Polyurethane Foam Used In Seat 50Mm And Backrest Polyurethane Foam Size: 25Mm. Finish: Pu Wooden Polish. The Item Shall Be Supplied Strictly As Per Specification, Approved Sample And As Per Direction Of The Engineer-In-Charge. 250 Each 2 Providing And Placing Of Dual Desk Cum Bench. Type Of Desking: Integrated Desk Cum Seating With Shelf / Storage Under Desk. Material Of Support Structure: Mild Steel Square Section Of Outside Side Minimum 25 Mm And Wall Thickness Minimum 1.2 Mm, Material Of Desk Top ( + / - 2 Mm ) : 18 Mm Thick Prelaminated Particle Board. Length Of Desking, Seating And Backrest ( ±10 Mm ) : 1050Mm, Height Of Desk Top ( ±5 Mm ) : 750Mm, Width Of Desk Top ( ± 5 Mm ) : 380Mm, Width Of Seating ( ±10 Mm ) : 320Mm, Height Of Seat ( ±10 Mm ) : 450Mm, Width Of Backrest ( ± 5 Mm ) : 240Mm. The Item Shall Be Supplied Strictly As Per Specification, Approved Sample And As Per Direction Of The Engineer-In-Charge. 275 Each 3 Providing And Placing Of Principal Sofa Set 3+1+1. Size Of 3 Seater Unit: 2060Mm ( W ) X 905Mm ( D ) X 855Mm ( H ) X 450Mm ( Seat Height ) , Size Of 1 Seater Unit: 860Mm ( W ) X 905Mm ( D ) X 855Mm ( H ) X 450Mm ( Seat Height ) . Seat Foam: The Seat Is Made Up Of Pu Foam With An Additional Top Layer Of Supersoft Pu Foam, Upholstered With Fabric Or Leatherette, Back Foam: The Back Is Made Up Of Pu Foam With Two Additional Top Layer Of Supersoft Foam, Upholstered With Fabric Or Leatherette, Understructure: Understructure Is Made Up Of 12Mm Thick Hot Pressed Plywood [ Moisture Resistance & Termite Proof As Per Is: 303 ] & Pinewood Of Cross Sections Devoid Of Major Knots & Surface Defects, 6 Nos. Per Seat & 3.8Mm Dia. Zigzag Spring Assembly Is Mounted Over Understructure For Cushioning Purpose, Leg: It Is A Welded Assembly Made In Stainless Steel Tube & Plate With Plastic Endcap. Certification: The Company Should Be Iso-9001, 14001, 45001, 50001, Greenguard ( Ul ) And Bifma Certified. The Item Should Be As Per Certifications And Specifications As Per The Direction Of Engineer-In-Charge. 4 Each 4 Providing And Placing Of Steel Dustbin. Size: 250Mm Dia X 380Mm ( H ) , Material: Stainless Steel, Shape Of The Dustbin Cylindrical: Maximum Capacity Of The Dustbin Is 10Ltr. The Item Shall Be Supplied Strictly As Per Specification, Approved Sample And As Per Direction Of The Engineer-In-Charge. 5 Each

Sr No	CorrigendumDate	Corrigendum	CorrigendumType	NewSubmissionDate
1	13-06-2023			20-06-2023

Refer document

INR 147000.0 /-

Refer document