Military Engineer Services-MES has published Tender For Certain Repairs To Flooring, Wall, Chajja, Facia, Plumbing And Sanitary Fittings Under The Aor Of Age (U) W/S-I And Age(U) E/S-I Under Age (I) (U) B/R, Delhi Cantt-10.. Submission Date for this Tender is 05-07-2023. Plumbing and Sanitary Work Tenders in delhi Delhi. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 19-Jun-2023 | Corrigendum 02 | BOQ | 28-06-2023 |
| 2 | 19-Jun-2023 | Corrigendum 01 | Other | 28-06-2023 |
| 3 | 28-Jun-2023 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 05-07-2023 |
| Sl. No. | Item Description |
| 1 | Demolition of cement concrete in ground floor and paving n.exc 15 cm below or above ground level complete all as specified and as directed. |
| 2 | Dismantling floor, hearth or wall tilling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified. |
| 3 | M&L non skid ceramic tiles 7 to 8 mm thick (square / rectangular) area of each tile exc 0.11 sqm but n.exc 0.18 sqm, in floor etc. set and joined in neat cement slurry over 15mm screed bed in CM 1:6 and pointed in white or coloured cement to match the existing surface complete all as specified and directed. |
| 4 | M&L for vitrified ceramic coloured tiles 10 mm thick (square/rectangular) area of each tile n.exceeding 0.36 Sqm in floors etc set and joined in neat cement slurry and pointed in white or colour cement to match colour tiles including 15 mm thick screed bed in cement mortar (1:6) complete all as specified and directed. |
| 5 | M&L for glazed ceramic coloured tiles (350x250x7mm/450x350x7mm ) thick on vertical surfaces such as skirting wall, and dado set and joint in neat cement slurry and pointed in white or coloured cement to match including 10mm thick plastering in cement mortar (1:4) rough to receive tiles complete all as specified and directed. |
| 6 | - ditto - all as per item No. 4 but on vertical surfaces such as skirting, dados and risers etc complete all as specified and as directed. |
| 7 | M&L for machine cut kota stone slab flooring 20-25mm thick over15 mm thick screed base in cement mortar (1:6) laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed. |
| 8 | M&L 50mm th PCC 1:4:8 type D-2 using 40mm graded aggregate as sub-base of kota stone, complete all as specified and as directed. |
| 9 | M&L 75mm th PCC 1:3:6 type C-1 using 40mm graded aggregate as in below interlocking complete all as specified and as directed. |
| 10 | M&L for machine pressed precast concrete interlocking paver bock any shape and size conforming to IS 15658-2006 of 60mm thick thickness, M-35 fixed with grey cement and no pigment including 50mm thick sand coushioning complete all as specified and as directed. |
| 11 | - ditto- all as per item No. 10 but "except tiles" obtained from item No.2 complete all as specified and as directed. |
| 12 | M&L 40mm th PCC 1:2:4 type B-1 using 20mm graded aggregate as in flooring,finished even and smooth without using extra cement complete all as specifed and as directed. |
| 13 | S & F glass dividing strips, 3mm thick 38mm width inserted in position to confirm to design complete all as specified and as directed. |
| 14 | M&L 75mm th PCC 1:3:6 type C-2 using 40mm graded aggregate as in plinth protection finished even and smooth without using extra cement complete all as specified. |
| 15 | Dismantled of brick masonrywork built in Cement mortar or cement lime mortar complete all as specified and directed. |
| 16 | M&L forbrick work with sub class "B" bricks (old size) straight or curved on plan exc 6 m mean radius, built in CM1:6 complete all as specified and directed. |
| 17 | M&L for brickwork with sub-class "B" bricks, straight or curved on plan to any radius in half brick work thick wall built in CM 1:4, complete all as specified and as directed. |
| 18 | Taking down cement plaster, any description from brick or stone walls etc. including racking out joints, hacking for key, scrubbing down with water complete all as specified and directed. |
| 19 | M&L for Rendering 10 mm thick on brick or concrete surfaces in cement mortar 1:6, finished even & smooth without using extra cement complete all as specified. |
| 20 | M&L for preparation of newly plastered surfaces of wall and applying three coats of white wash over a coat of primer complete all as specified and directed. |
| 21 | M&L for rendering 15 mm thick in cement mortar (1:4) on fair faces of brick work on concrete surfaces using water proofing compound @ 3% by weight of cement finished even and smooth without using extra cement complete all as specified and as directed. |
| 22 | M&L for preparation of newly plastered surfaces of wall & applying two coats of cement base paint over a coat of primer (chalk whiting ) complete all as speificed and as directed. |
| 23 | M&L for rendering 5 mm thick in cement mortar (1:3) on ceilling finish even and smooth without using extra cement complete all as specified and directed. |
| 24 | M&L for prepration of newly plastered surfaces on ceiling and applying three coats white wash complete all as specified and as directed. |
| 25 | Demolation cement concrete (reinforcement) as in roofs, floors (other than ground floor), beams, staircase, landing, chajjas and similar suspended work(reinforcement cut as required to facilitate demolition) complete all as specified and as directed. |
| 26 | M&L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90 mm dia or securing with clips complete all as specified and as directed. |
| 27 | M&L for mild steel TMT bars 6mm to 8mm dia as in stirrups, cut to length, bent to shape required, columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90 mm dia or securing with clips complete all as specified and as directed. |
| 28 | M&L for formwork to chullah hoods, chajjas, troughs and similar items including edges complete all as specified and as directed. |
| 29 | M&L for formwork to soffits of suspended slabs complete all as specified and as directed. |
| 30 | M&L for reinforced cement concrete (nominal mix)type B1 1:2:4 (20mm graded aggregate) as in chajjas complete all as specified and as diected. |
| 31 | M&L for reinforced cement concrete (nominal mix)type B1 1:2:4 (20mm graded aggregate) as in slab supported on walls complete all as specified and as diected. |
| 32 | Taking upor down 15MM steel tubing and connections including cleaning for refixing or removal to store complete all as specified and as directed. |
| 33 | S&F 15MM GI tubing medium grade galvanised steel tubing with all fittings fixed to wall or laid in floors complete all as specified and as directed. |
| 34 | Taking upor down 20MM steel tubing and connections including cleaning for refixing or removal to store complete all as specified and as directed. |
| 35 | S&F 20MM GI tubing medium grade galvanised steel tubing with all fittings fixed to wall or laid in floors complete all as specified and as directed. |
| 36 | S&F in repairs vitreous china urinals,flat back of size 465mmX 355mmX 265 mm ,white with grating and union for discharge pipe complete all as specified and directed. |
| 37 | S&F in repair 32mm bore PVC waste pipe n. exc. 90cm long with 40mm bore PVC coupler for urinal complete all as specified and directed. |
| 38 | Supply and fix,as in repairs,vitreous china squatting pan of Orrisa pattern size 580mm x 440 mm white with integral foot rests (excluding flushing cistern and flush pipe) including connection making good to floor all as specified . |
| 39 | S&F as in repair vitreous china wash down water closet pan (pedestal pattern) white (excluding fixing bolts, flusing cistern and flush pipe incl plastic water closet seat, black closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device completed all as specified and directed |
| 40 | S&F in repair plastic water closet seat back closed pattern with flat bottom and seat cover and mild steel chromium plated or aluminised hinging devicecomplete all as specified. |
| 41 | Supply & fixed in repair only 10 ltrs capacity (PVC), valve less, syphonic action type, fluhsing cistern, low level, white, with inlet, ball valve, float and handle including brackets, flush pipe of polyethylene of low or high densitycomplete all as specified and directed. Note:- The rate for fixing flushing cistern are deemed to be included with the rate of fixing water closet any type. |
| 42 | S&F in repair Vitreous china wash basin,whiteflat back, size 550x400mm excluding taps, but including waste pipe,waste cupling of PTMTincl bracket setc all as specified. |
| 43 | Dismantling water tank exc 500 & n exc 1000 ltr and removing from site as directed. |
| 44 | S&F rotational moulded polythene water storage tank (Cylindrical vertical withclosed top) hoisted and fixed in position of 1000 ltrs capacity any description,complete all as specified in SSR Part I. |
| 45 | Dismantling water tank exc 250 & n exc 500 ltr and removing from site as directed. |
| 46 | S&F rotational moulded polythene water storage tank (Cylindrical vertical withclosed top) hoisted and fixed in position of 500 ltrs capacity any description,complete all as specified in SSR Part I. |
| 47 | S&F in repair gun metal globe or gate valve with iron wheel screwed both ends for iron pipe of 20 mm dia all as directed. |
| 48 | S&F in repair ball valve high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for 20mm dia iron pipe and fixed complete all as specified and as directed. |
| 49 | S&F in repair 15 mm bore bib tap cast copper alloy (fancy type), chromium plated, with crutch or butterfly handle screwed down for iron pipe or for brass ferrule,complete all as specified and as directed. |
| 50 | S&F in repair 15 mm bore bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed,complete all as specified and as directed. |
| 51 | S&F in repair pillar tap, 15 mm dia copper chromium plated fancy type screwed down, high pressure, screwed both ends for iron pipe or for unions complete all as specified and as directed. |
| 52 | S&F as in replacement 600x450 mmlooking mirror, bevelled edge of selected quality glass with aluminium frame made of channel alround, mounted on 6 mm thick commercial ply or AC building board, fitted to wooden plug with CP screws complete all as specified and as directed. |
| 53 | S&F in repair 15 mm stop valve fancy type chromium plated cast copper alloy screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions complete all as specified and directed |
| 54 | Hacking out old broken glass (any thickness, size, quality or description) from wooden/steel/Aluminium frames, glazed with oil putty or fixed with beads complete all as specified and as directed. |
| 55 | M & L sheet glass ordinary quality 3mm thick and glazing with oil putty/ aluminium/wooden beads in squares n.exc 0.5sqm in each pane complete all as specified and directed. |
| 56 | S&F as in repair 125 mm shower rose CP with or without swivel joints, any size including fixing to steel pipe or union complete all as specified and directed. |
| 57 | S&F as in repair CP toilet paper holder with flat recessed type stainless steel fixed to wallscomplete all as specified and directed. |
| 58 | Note: (a)The work for sr item No.59 to 61 shall be executed directly by FOSROC company or their authorized applicator. (b) Quoted rate shall be inclusive of material, all kind of labours,tools and plants,scaffolding and working upto 25 mtr height from ground level. (c) Adoption of necessary safety arrangement like safety belts,ropes,helmets,safety net etc.Which are required for safety of working at height 25 mtr and all rates shall be mandatary and deemed to be inclusive on quoted rates. |
| 59 | Dismantling/Chipping off loose concrete surfaces,pillout concrete ceiling of any type of structure of any thickness by chiselling or as directed by Engr-in-Chrage and removal of debries upto a distance of 100m complete all as specified and directed by Engineer-in-Chrage. |
| 60 | Supply and fixed of hard drawn steel wire fabric not exc 4.00 kg weight per squre meter cut to lengths,bent to shape required and tying with and including mild steel wire (annealed) not less than 0.9mm in dia supplied and fixed in reinforcement complete all as specified and directed. |
| 61 | M & L for guniting with cement and coarse sand in ratio1:3 withincluding FOSROC Nitobond SBR mixed @ 1Ltr per 50kg of cement and water contant ratio 0.45 used as per manufacturer"s instruction using stotcrete pumps and allied equipment,uniform thickness of 25mm to 40mm complete on RCC wall, beams, pillars, columns, chajjas, ceiling and dom of water storage tanks etcall as specified and directed . |
| 62 | M&L for rendering 5 mm thick in cement mortar (1:3) on guniting surface finish even and smooth without using extra cement complete all as specified and directed. |
| 63 | S&Fsoap dish, any type, fixed to plug with chromium plated brass screws in the wall with glass shelf assembly complete all as specified and directed. |
| 64 | S&F as in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15mm dia pipe with 1.25 mtr long flexible tube and ABS wall hook including making connection and fixed in positioncomplete all as specified and directed. |
| 65 | S&F as in repair for PVC connection 600mm long superior quality with PTMT nut on both side complete all as speciifed and as directed. |
| 66 | S&F in repair waste coupling PTMT suitable for 32 /40 mm bore pipe complete all as specified and as directed. |
| 67 | Demolation and breaking updrain 75/100mm pipes (salt glazed ware, AC or reinforced concrete) set in cement mortar complete all as specified and as directed. |
| 68 | S&F PVC (SWR) pipe 110 mm dia single socketed with rubber ring joints laid in trenches or in floor including necessary excavation complete all as specified |
| 69 | S&F PVC (SWR) pipe 110 mm dia single socketed with rubber ring joints fixed to wall complete all as specified |
| 70 | S&F PVC (SWR) pipe 110 mm dia bends complete all as specified |
| 71 | S&F PVC (SWR) pipe 75 mm dia single socketed with rubber ring joints laid in trenches or in floor complete all as specified and as directed. |
| 72 | S&F PVC (SWR) pipe 75mm dia single socketed with rubber ring joints fixed to wall complete all as specified and as directed. |
| 73 | S&F PVC (SWR) pipe 75 mm dia bends complete all as specified and as directed. |
| 74 | S&F in repairs, 32 mm MS pipe powder coated as in curtain rod etc complete all as specified and as directed. |
| 75 | S&F for PVC (SWR) 75MM floor trap, plain with grating including jointing with solvent cement complete all as specified and as directed. |
| 76 | S&F as in repair sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and as directed |
| 77 | Taking down chowkat with shutter n. exc 1.5 sqm each and removing from site as directed. |
| 78 | S&F of solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, suppling and fixing in opening as per specification and drawing. |
| 79 | S&F of factory made solid panel PVC door shutter 30mm thick (Style) consisting of frame made out of M.S tubes for top and bottom rails. M.S frame shall be covered with heat moulded plain colour PVC "C" channel moulded plain colour PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail; Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying and fixing in the frame at site as per specification and drawing. |
| 80 | S&F 100 mm size MS butt hinges medium weight cold rolled fixed/welded to frame complete all as directed. |
| 81 | S&F 150 mm long aluminium anodised, barrel tower bolts of extruded section all as directed. |
| 82 | S&F 150 mm size aluminium handles, cast type, anodised all as directed. |
| 83 | M&L welding in repair exc 2.50 cm but n.exc 5 cm in length thickness of metal to be welded exc 6mm but n.exc 9mm complete all as specified and as directed. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
