Tender For Mtc. Of Urban Water Supply Scheme Under Dws Dvn Jrn During 2023-24 Sh Installation Of Motor Sets Starter, Main Switch, Electrical Panel Board, Induction Motors, Reduction Gearbox Etc Complete Of 0.55 Mgd Capacity Surface Treatment Plant At
Tender Value
9.55 Lakhs
Estimated cost
Bid Submission
28 Jun 2023
0 days left
EMD
19110
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
jirania → Tripura
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Mtc. Of Urban Water Supply Scheme Under Dws Dvn Jrn During 2023-24 Sh Installation Of Motor Sets Starter, Main Switch, Electrical Panel Board, Induction Motors, Reduction Gearbox Etc Complete Of 0.55 Mgd Capacity Surface Treatment Plant At Ranirbazar Please Refer To Dniet
BOQ
| Sl. No. | Item Description |
| 1 | Charges for lifting of pump, motor, column pipe etc. from intake well and stacking the same at suitable place as per specification and direction of the Eng- In -Charge. |
| 2 | Rewinding of Horizontal Motor suitable for centrifugal pumps by complete dismantling in/c providing & rewinding with super enamelled copper conductor (as per IS: 13730 part-3) conductor & all necessary spare parts and reassembling the same in/c serving of rotor & necessary trial run as per specification and direction of the eng-In-Charge. |
| 3 | A) 1 - 1.5 HP Pump motor set. |
| 4 | Rewinding of VT Motor suitable V.T. pumpp by complete dismentling in/c providing & rewinding with super enamelled copper conductor(as per IS: 13730 part-3) conductor & all necessary spare parts and reassembling the same in/c serving of rotor & necessary trial run as per specification and direction of the eng-In-Charge. |
| 5 | A) 50 - 65 HP |
| 6 | Providing and fitting fixing C I sluice valve (with cap) complete with bolts, nuts, ruber insertions etc. (the tail piece if required will be paid separately ) as per specification & direction of the Eng-In-Charge. |
| 7 | i) 150 mm dia. PN-1.6 |
| 8 | ii) 200 mm dia. PN- 1.6 |
| 9 | Providing & fitting fixing with PVC insulated single core multistand copper cable conforming to IS: 694 for inter connection with all electrical equipment of the panel board as per specification & direction of the eng-in-Charge. |
| 10 | i) 10 sqmm |
| 11 | Providing and fitting fixing with PVC insulated 3 core flatCopper cable conforming to relevant IS code for submerssiblemotor with all necessary equipments and fittings as requiredas per specification and direction of the Engineer-in-charge. |
| 12 | i) 10 sqmm |
| 13 | ii) 6 sqmm |
| 14 | Providing & fitting fixing low voltage AC TEFC squiral cage induction motor suitable for 415V(+)(-) 10%, 3 phase supply, foot mounted (B3 construction) continous rated (S1 delay) with bare shaft & key as per IS:12615/IEC:60034- /LNT/BCH/HAVELS/Siemens etc. make complete as per psecification and direction of the Eng-In-Charge. |
| 15 | i) For 1.00 HP/0.75Kw |
| 16 | ii) For 1.50 HP/1.10Kw |
| 17 | Providing & fitting fixing Worm reduction Gearbox suitable to the low voltage AC TEFC squiral cage induction motor completeNT/BCH/HAVELS/Siemens etc make as per specification and direction of the Eng-In-Charge. |
| 18 | i) Type 200A, Ratio 70/1 |
| 19 | ii) Type 237A, Ratio 60/1 |
AI Tender Summary
Tender Timeline
Jun 07, 2023
11:30 IST
Tender Published
Tender notice published.
CompletedJun 28, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJun 28, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender