Bharat Sanchar Nigam Limited-BSNL has published Tender For Providing And Fixing Aluminium Partition For Cabin,Curtain Cloths , Supplying Of Office Tables And Misc Repair Works At The Office Of The Ddg Dot ( Ne1) Lsa At First Floor ,Door Sanchar Bhavan, Kamanchoumuhani,Agartala ( Tripura Ba ). Submission Date for this Tender is 13-06-2023. Aluminium Furniture Tenders in agartala Tripura. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: |
| 2 | a)Cement mortar 1:4 (1 cement : 4 coarse sand) |
| 3 | Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: |
| 4 | a ) 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws. |
| 5 | Providing and fixing chromium plated brass curtain rods having wall thickness of 1.25 mm with two chromium plated brass brackets fixed with C.P. brass screws and PVC sleeves etc., wherever necessary complete : |
| 6 | a ) 20 mm dia. |
| 7 | Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete. |
| 8 | Providing and fixing bright finished brass casement window fastener with necessary screws etc. complete. |
| 9 | Providing and fixing bright finished brass casement stays (straight peg type) with necessary screws etc. complete : |
| 10 | a ) 300 mm weighing not less than 330 gms |
| 11 | Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete : |
| 12 | a ) 300x16 mm |
| 13 | Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade with necessary screws etc. complete : |
| 14 | a ) 300x10 mm |
| 15 | Providing and fixing aluminium handles ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete : |
| 16 | a ) 125 mm |
| 17 | Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete. |
| 18 | a ) Single rubber stopper |
| 19 | 15 mm cement plaster on the rough side of single or half brick wall of mix : |
| 20 | a ) 1:4 (1 cement: 4 fine sand) |
| 21 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade: |
| 22 | a ) Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture. |
| 23 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 24 | Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq. meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground , all complete as per directions of Engineer-In-Charge. |
| 25 | a ) With cement mortar 1:4 (1cement: 4 coarse sand). |
| 26 | Making the opening in brick masonry including dismantling in floor or walls by cutting masonry and making good the damages to walls, flooring and jambs complete, to match existing surface i/c disposal of mulba/rubbish to the nearest municipal dumping ground, all complete as per directions of Engineer-In-Charge. |
| 27 | a ) For door/ window/ clerestory window. |
| 28 | Renewing glass panes, with putty and nails wherever necessary including racking out the old putty: |
| 29 | a ) Float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm). |
| 30 | Cutting holes of required size in brick masonry wall for fixing of exhaust fan including providing and fixing 300 mm dia PVC pipe conforming BIS-12818 and making good the same etc. complete as per direction of Engineer-in-charge. |
| 31 | Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. |
| 32 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : |
| 33 | a ) For fixed portion |
| 34 | i) Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) |
| 35 | b) For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately). |
| 36 | i) Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) |
| 37 | Providing and fixing 12mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS:12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge. |
| 38 | a ) Pre-laminated particle board with decorative lamination on both sides. |
| 39 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): |
| 40 | a ) With float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm) |
| 41 | Providing and fixing Brass 100mm mortice latch and lock with 6 levers without pair of handles (best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete. |
| 42 | Providing and applying repairs to the existing glazed window shutter including screws, Rivets,nuts,bolts,bearing ,putty and cleaning of complete window shutter and glass portion by appling glass cleaner etc. all complete as per the directions of Engineer in harge a) Glass window shutter up to 5.00 Sqm |
| 43 | Supplying and fixing curtains of approved colour and shade with decorative visible appearence ( pattern and type as desired by the users ) to existing glaszed window shutters made up of high quality cloth from approved cloth mills in required color and shade including stiched in as per decorative pattern designed by BSNL/DOT authorities including fixing to available curtain rods after waashing and iron press etc all compete as per the directions of Engineer in charge |
| 44 | a ) Size 1.10 to 1.25 X 1.80 to 2.40 Meter ) |
| 45 | Supplying and providing Office tableofaprroved make Godrej/elentra etc. model ENT 1500 or equivalent manufacturer and (quality as per user desires ) in approoved colour shade etc all complete as per the directions of Engineer in charge.a) 1.50 X 0.75 X 0.75 meter height |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
