|
| 1 | Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a primin In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works |
| 2 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work |
| 3 | Cleaning of under ground sump, Over Head R.C.C. Tank ( independent staging) including disposal of slit and rubbish, all as per direction of Engineer-in-Charge. The cleaning shall consist following operations:- (i) Tank shall be emptied of water by pumping & bottom shall be cleaned of silt and other deposits. (ii) Entire surface area of the sump shall then scrubbed thoroughly with wire brush etc. and pressure washed with water. (iii) Chlorination of RCC internal surface by liquid chlorine. (iv) The treated surface shall be dried using air jetting and all loose particles shall be removal from the surface. (v) Finally the surface shall be treated with ultraviolet radiation etc. as per direction of Engineer-in-Charge. |
| 4 | Dismantling G.I. pipes (external work) including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means including stacking of pipes within 50 metres lead as per direction of Engineer-in-charge : 15 mm to 40 mm nominal bore |
| 5 | Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the wallsherever required : Kitchen sink without drain board 610x510 mm bowl depth 200 mm |
| 6 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. Internal work - Exposed on wall |
| 7 | 15 mm dia nominal bore |
| 8 | 20 mm dia nominal bore |
| 9 | 25 mm dia nominal bore |
| 10 | Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete : 25 to 40 mm nominal bore |
| 11 | Providing and fixing uplasticised PVC connection pipe with brass unions :30 cm length 15 mm nominal bore |
| 12 | Painting G.I. pipes and fittings with synthetic enamel white paint with two coats over a ready mixed priming coat, both of approved quality for new work : |
| 13 | 15 mm diameter pipe |
| 14 | 20 mm diameter pipe |
| 15 | 25 mm diameter pipe |
| 16 | Providing and fixing G.I. Union in existing G.I. pipe line, cutting and threading the pipe and making long screws, including excavation, refilling the earth or cutting of wall and making good the same complete wherever required : |
| 17 | 15 mm nominal bore |
| 18 | 20 mm nominal bore |
| 19 | 25 mm nominal bore |
| 20 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. |
| 21 | Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms. 15 mm nominal bore |
| 22 | Providing and fixing PTMT Ball cock of approved quality, colour and make complete with Epoxy coated aluminium rod with L.P./ H.P.H.D. plastic ball.20 mm nominal bore, 120 mm long, weighing not less than 198 gms |
| 23 | Cutting holes up to 30x30 cm in walls including making good the same: With common burnt clay F.P.S. (non modular) bricks |
| 24 | P/F gun metal gate valve 15 mm dia. of approved quality(DRP make) |
| 25 | P/F gun metal gate valve 20 mm dia. of approved quality(DRP make). |
| 26 | P/F gun metal gate valve 25 mm dia.(DRP make or equiavlent) of approved quality |
| 27 | Uprooting stay unwanted vegetation/ peepal tree etc from wall and terrace upto floor level i/c repair of damaged wall & plaster and making good the same as per existing finishing as directed by Engineer-in-charge. |
| 28 | P/F Tank Nippale 15 to 20 mm dia. of approved quality(ISImake) |
| 29 | Charges for disconnecting and loading / unloading the PVC water storage tank500 to 1000 ltr capacity from terrace to Engineering store Maurice Nagar as directed by engineer-in-charge |
| 30 | P/F PVC water storage tank cover 500 to 1000 ltr capacity with locking arrangement etc complete. |
| 31 | Disposal of malba and other kooda (waste items) garbage and disposal out sidethe campus |
| 32 | Cleaning of roof, vertical rain water pipe, spout, sunshade also and necessary removal of vegetation complete in allrepsect as per the direction of Engineer-in-charge. |
| 33 | Repair the damaged GI pipe line with required GI pipe and fittings etc complete as per direction of Engineer –in-charge (15 to 25 mm) |
