Town Panchayats-TP has published Tender For Renovation, Improvement And Maintenance Of Existing 2.00 Lakhs Lit Sump And Pump Roomat Ward No; 7 Melapalayam Thalagani Street In Watrap Town Panchayat.. Submission Date for this Tender is 15-06-2023. Pump Supply Tenders in watrap Tamil Nadu. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Earth workexcavating and deposting on bank with initial lead of 10m& intial lift of 2m in hard stiff clay, stiffblack cotton, hard red earth shales ,murram, gravel, stoneyearth mixed with small size boulders etc completed as per std specification. |
| 2 | Cement concrete of mix 1:4:8 (One cement four sand eight aggregates) using 40mm guage hard broken including cost conveyance of all materials to site and labour charges, transporting and placing in position including shoring, forming protective bunds, cofferdams bailing out of water labour for mixing compacting, finishing and curing, working at depths, tools and plants and incidental charges such as sheeting, shoring and bracing and their subsequent removal etc., complete as per standard specification. |
| 3 | Brick Work in Cement Mortor 1:5 Mix (one cement, five sand) using new best II Class Bricks of size 83/4" x 41/4" x 23/4" from approved quarry including cost and conveyance of all materials to site. Loading and unloading charges and labour charges for mixing, laying and curing etc. complete. Complying with std. specifications. |
| 4 | Dismantling and clearing away from this site for exisiting damaged condition of work including cost for all labour charges etc., complete as per standard specification.1)R.C.C |
| 5 | Plastering in Cement Mortor 1:5 Mix (one cement, five sand) 12mm thick including cost and conveyance of all materials to site, loading and unloading charges and labour charges for mixing, laying and curing etc. complete. Complying with std. specifications. |
| 6 | Plastering in Cement Mortor 1:3 Mix (one cement, five sand) 10mm thick including cost and conveyance of all materials to site, loading and unloading charges and labour charges for mixing, laying and curing etc. complete. Complying with std. specifications. |
| 7 | Steel centering for side and sifitsincluding supports and struttingupto 1m height for plain surfacesuch as RCC slab with all cross bracings using mild steel sheet of size 90cmx60cmx10 gaugestiffened with welded miled steel angles of size 25x25x6mm for laid over silver oak for coundary wood joints of size 10x6.5 cm spaced at about 90cm centre to centre and supported by casurials props of 10cm to 13 cm diaspaced at about 75cm centre to centre and suppor etc completed as per std specification. |
| 8 | Supplying fabricating and placing in position of steel rods using TMT Steel including cost of binding wire, cost of labour charges for fabrication and placing in positionetc. Complete. Complying with std. specifications. |
| 9 | Vibrated Reinforced Cement Concrete 1:1½:3 Mix (One part cement, one and half part of sand and three part of aggregate)using 20mm size ISS HBG metal machine crushed from approved quarry for Reinforced Concrete Works including cost and conveyance of all materials to site, loading and unloading charges and labour charges for mixing, laying and curing but excluding cost of reinforcement etc.Complete |
| 10 | A) Supply and fixing in position of RCC Jolly 50mmtk including cost and conveyance of all material to site and all other labour charges for fixing etc., Complete. |
| 11 | C) Supplying and fixing RCC Pre cast slab in RCC 1:1 1/2:3 mix including cost of reinforcement grill but including moduling, finishing watering curing and fixing in position etc., Complete as per std., Specifications., |
| 12 | Manufacturing, Supplying and Fixing of Stainless Steel Hand rails for staircase near wet riser using 50mm dia 304L Grade Stainless Steel pipe of 1.60mm thick will be provided withtubular supports made of 304L Grade Stainless Steel pipe of 25mm dia of 1.60mm thick welded to the railing. The supports will be grouted into the wall and provided with 93.00mm thick Stainless Steel circular base plate of 304 Grade. The rate shall included for grouting into concrete with necessary supporting arrangements the hand rail in floor polishing buffing, bonding, cutting, grinding, conveyance,welding charges, electrical charges, etc. complete. |
| 13 | Painting the oldiron work in all floor two coat of best synthetic enamel paintof approved colour and brand over one coat of primer including scrapping and preparation of surface, cost of breshes and neat finishing complying with stadard specifications |
| 14 | Painting the walls two coats over one coat of priming with best Ready mix plastic Emulsion paint of approved colour and quality including preparation of surface and finishing neatly etc., complete complying with standard specification and as directed by departmental officers(S.l.No.359-A) |
| 15 | Providing two legged scaffolding using 15cm dia blue-gum posts of 4.0m overall length (3M HT + 0.5M projection + 0.5m into ground) the distance between two rows being 1.25m and the spacing of postsbeling 2.0m and the spacing of postsbeling 2.0m in both the rows with two horizontal posts with 0.5m overlap on either sideand braces at 2m c/cincluding longitudinal and transverse middle braces to step up and providing aplatform with country woodplanksof 40mm tk & 1.0m width in a complete form using colr and nalls - 1.0m run -- FOR REJUVENATION WORKSFirst Level; 0 to 3.00 M |
| 16 | Second Level:3.00 to 5.50 M |
| 17 | Third Level:5.50 to 8.00 M |
| 18 | Fourth Level ;8.00 to 10.50M |
| 19 | Fifth Level:10.50 to 13.00M |
| 20 | Six th level 13.00 to 15.50 M |
| 21 | Weathering corese in cement motor 1:2 line mixed with all set in brick jelly concrete 1:4:8 Mix concrete 10 cm thick using 20mm brick jelly and top finished with c.m. 1:3 mix 20mm thick without any leakage etc. complete. |
| 22 | Finishing with top of roof with one course of machine pressed tiles of size 23cmx23cmx23cm of approved quality laid in cement mortar 1:3 (One cement and three sand) 12mm thick mixed with water proofing compound conforming to ISS by 2% weight of cement used and the joint pointed neatly to full depth of tiles with same water proofing compound mixed with cement motar, red oxide, etc. complete. |
| 23 | Supply and delivery of Woltman model with removal mechanism water meters,(no domestic use) conforming to ISO 4064 part I, II, III Class B and IS-2373 with life cycle testcertificate from FCRI/ NABL accridiated lab. The watermeter shall have magnetic drivers or mechanicaldrivers and shall be versatile for installation in any position. The meters shall behydrodynamically, hydrostatically balanced. The runner, runner chamber, |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
