Bids Are Invited For The Procurement Of Deep Diving Set Accessories Wet Diving Suit 3Mm , Wet Diving Suit 5Mm , Gloves , Hose For Full Face Mask , Pressure Gage , Reserve Air Valve , Octopus , Boot , M 8 Strip For Frb Buckle Full Face Mask , Din Insert In, Kamrup Metro-Assam
TDR : 38031857
Tender Notice
BOQ
Expired
Kamrup Metro
Assam
Bids Are Invited For The Procurement Of Deep Diving Set Accessories Wet Diving Suit 3Mm , Wet Diving Suit 5Mm , Gloves , Hose For Full Face Mask , Pressure Gage , Reserve Air Valve , Octopus , Boot , M 8 Strip For Frb Buckle Full Face Mask , Din Insert In
Men s full suit L XL sizeraw cut collarblack blue colourWET SUIT in 3 mm neopreneIt will come in a one piece overall design
2
WET DIVING SUIT 5mm
Men s full suit L XL sizeraw cut collarblack blue colour WET SUIT in 5 mm neopreneIt will come in a onepiece overall design
3
GLOVES
Comes with comfort lining and grip neoprene material and thickness is 3mm
4
HOSE FOR FULL FACE MASK
This is a low pressure 800 mm hose required for connection of full face mask with first stage regulator to provide breathing air to diver in the full face mask
5
PRESSURE GAGE
It should be supplied with a PRESSURE GAGEwhich shall be connected to the 1st stage of the regulator to check the pressure of air in the cylinder The 1st stage regulator and the pressure gage should also be type tested and certified to EN250 2014 standard by EU notified body for use at 50m depth
6
RESERVE AIR VALVE
This is required for fixing on diving kit cylinder to manage the air while use of cylinder under water it has a knob for managing the reserve air in the cylinder
7
OCTOPUS
Octopus with yellow colored extra flex hose of length 120cm again connected using Q C couplingThe octopus should have dive pre dive switch Weight of the octopus without the hose should be within 250 grams plus minus 5 percent tolerance
8
BOOT
5mm thickness with non slip sole and zipper for comfortable wearHeavy duty molded sole 5mm 7 mm sole with anti slip reinforcement
9
M8 STRIP FOR FRB BUCKLE FULL FACE MASK
M 8 Strip for full face maskstrap for fixing the full face mask over the diver face with FRB2 buckle soft silicone rubber material
10
DIN INSERT IN VALVE
DIN INT screw for inserting in the reserve air valve for filling of diving cylinder
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
