Tender For Construction Of Day Care Sub Center Cum Health And Wellness Center At Berhampur Gualigoroda Of Madhubana Gp
Tender Value
39.42 Lakhs
Estimated cost
Bid Submission
22 Jun 2023
0 days left
EMD
39426
Bank guarantee accepted
Document Fee
7080
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
satyabadi → Odisha
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of Day Care Sub Center Cum Health And Wellness Center At Berhampur Gualigoroda Of Madhubana Gp
BOQ
| Sl. No. | Item Description |
| 1 | Foundation excavation in Earth work in hard soil within 50m. Initial lead and 1.5m initial lift including rough dressing and breaking clods to maximum 5cm to 7cm and laying in layer not exceeding 0.3m in depth and as per specification approved by the department etc. complete.etc. complete as per direction of Engg-in-Charge . |
| 2 | Filling foundation and plinth with sand and well watered and rammed including cost, conveyance and royalty etc complete asper direction of Engg.-in-Charge. |
| 3 | Cement concrete (1:3:6)with 40mm size CBHG metal including cost, conveyance and royalty etc. completeas per direction of Engg.-in-Charge. |
| 4 | Cement Concrete (1:2:4) with 12 mm size broken hard granite chips for R.C.C. works including hoisting and laying etc. complete as per direction of Engg-in-Charge . |
| 5 | Fly Ash Brick masonry in c.m. 1:6 in F & Pincluding cost,conveyance and royalty of materials curing etc. complete. as per the direction of the Engineer-in-charge. |
| 6 | Ist class Fly Ash brick masonry workin superstructure thoroughly soaked in water, withcement mortar (1:6) including scaffoldings ,racking out joints, curing etc complete as per specification/drawing and as per the direction of the Engineer-in-charge. (Ground Floor) |
| 7 | FirstFloor |
| 8 | Second Floor |
| 9 | Providing and Laying reinforcement Cement concrete (M-20) with 20 mm and down graded chips including cost all materials,labours,T & P,curing etc complete (excluding the cost of reinforcement & Centering, shuttering) as per direction of Engineer-in-charge.(Column Base :Ground Floor ) |
| 10 | Plinth Beam: Ground Floor |
| 11 | Beam & Column: Ground Floor |
| 12 | First Floor |
| 13 | Second Floor |
| 14 | 65mm avg. Chajja :Ground Floor |
| 15 | First Floor |
| 16 | Second Floor |
| 17 | Roof Slab :Ground Floor |
| 18 | First Floor |
| 19 | Second Floor |
| 20 | Lintel :Ground Floor |
| 21 | First Floor |
| 22 | Staircase :Ground Floor |
| 23 | First Floor |
| 24 | Supplying, fitting and placing uncoated HYSD bar reinforcement complete in proper position including cost of binding wire 18 to 20 gauge as per direction of Engg.-in-Charge. Ground Floor: |
| 25 | First Floor |
| 26 | Second Floor |
| 27 | 12mm cement plaster in cement mortar (1:6)including necessary scaffolding curing etc. as per direction of Engg.-in-Charge.(Ground Floor) |
| 28 | First Floor |
| 29 | Second Floor |
| 30 | 16mm thick cement plaster in cement mortar (1:6) including necessary scaffolding curing etc. as per direction of Engg.-in-Charge. (Ground Floor) |
| 31 | First Floor |
| 32 | Second Floor |
| 33 | 6mm.thick cement plaster with C.M(1:4) to RCC surface including closed deep chipping and slury treatment etc. complete as per direction of Engg.-in-Charge.(Ground Floor) |
| 34 | First Floor |
| 35 | Second Floor |
| 36 | Fixing colour Vitrifiedtiles in floors (Printed Series)of size 600mm x600 mm of approved make conforming IS:13755 laid on 20 mm thick cement mortar (1:4)and filling joints with white cement of approved qualityincluding cost of all materials, labour T&P etc rrequired for the work all completeas per direction of Engineer-in-charge. (Ground Floor) |
| 37 | First Floor |
| 38 | Fixing Vitrifiedtiles in dados (Printed Series)skirting and risers of stepson 12 mm thick cement plaster(1:3) jointed with neat cement slurry mixed with pigments to matche shade of the tiles including rubbing and polishing completeasper direction of Engineer-in-charge. (Ground Floor) |
| 39 | First Floor |
| 40 | Fixing Granitetiles ofsize above 0.4 Sqm. (20mm. thick) in floors,treads or steps and landings on 25 mm thick CM (1:1) jointed with neat cement slurry mixed with pigments to match the shades includind cost for rubbing, polishing & cost of marbel tiles etc. completeas per direction of Engg-in-Charge .(Ground Floor) |
| 41 | First Floor |
| 42 | Fixing granite tiles of0.10 Sqm. & upto 0.4 Sqm. (10mm. thick)in dados skirting and risers of steps on 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigments to match the shades includind cost for rubbing, poloshing complete excluding cost oftiles etc. completeas per direction of Engg-in-Charge . (Ground Floor) |
| 43 | First Floor |
| 44 | Cement washing one coats with cost of all labour & materials etc. complete as per direction of Engg-in-Charge . (Ground Floor) |
| 45 | First Floor |
| 46 | Second Floor |
| 47 | Wall Priming onecoats on new work with wall water bound primer ofapproved shadeas per direction of Engg-in-Charge . (Ground Floor) |
| 48 | First Floor |
| 49 | Second Floor |
| 50 | Wall painting two coatswith Plastic emulsion paint ofapproved shadeas per direction of Engg-in-Charge . (Ground Floor) |
| 51 | First Floor |
| 52 | Second Floor |
| 53 | Wall painting two coats on new work with Weather coat paint ofapproved shade as per direction of Engg.-in-Charge.(Ground Floor) |
| 54 | First Floor |
| 55 | Second Floor |
| 56 | Supplying and fixing of steel M.S. grill with all fitting and fixtures including cost of cutting holes in the brick masonry and R.C.C. columns and making good to damage etc, as per direction of Engineer -in -charge. (Ground Floor) |
| 57 | First Floor |
| 58 | Second Floor |
| 59 | Eamel Painting two coats with enamel paint over one coat of primer of approved quality etc. complete as per direction of Engg-in-Charge .(Ground Floor) |
| 60 | First Floor |
| 61 | Second Floor |
| 62 | Fixing Floor tiles in floors,treads or steps and landings on 25 mm thick CM (1:1) jointed with neat cement slurry mixed with pigments to match the shades includind cost for rubbing, polishing & cost of marbel tiles etc. completeas per direction of Engg-in-Charge .(Ground Floor) |
| 63 | First Floor |
| 64 | Fixing Ceramic Glazed wall tiles in dados skirting and risers of stepson 12 mm thick cement plaster(1:3) jointed with neat cement slurry mixed with pigments to matche shade of the tiles including rubbing and polishing completeasper direction of Engineer-in-charge. (Ground Floor) |
| 65 | First Floor |
| 66 | Providing, fitting,fixing of Al.door withanodised Al.door section of 9202 as vertical member, 9201 as top member and 9200 as bottom and middle member of 12 mm thick prelaminated Nova pan Board fixed in door frame with frame section no 9221 and tappered clip No-4660 and the frame to be completed by means of jointing angle No-1855 including all cost of labour,T&P ,hire charges of drilling machine,labour charges etc. complete as per direction of Engg-in-Charge .(Ground Floor) |
| 67 | First Floor |
| 68 | Fixing industrial Chequred tiles in floors,treads or steps and landings on 25 mm thick CM (1:1) jointed with neat cement slurry mixed with pigments to match the shades includind cost for rubbing, polishing & cost oftiles etc. completeas per direction of Engg-in-Charge .(Ground Floor) |
| 69 | Supplying , fitting and fixing of two Track UPVC sliding window of approved make with 6mm thick glass of approved qualitycomplete with frame. shutters and all fitting and fixtures etc. completeas per direction of Engg-in-Charge .(Ground Floor) |
| 70 | First floor |
| 71 | 12mm. thick cementplaster in c.m. 1:4 over brick masonryincluding cost conveyance and royality of materials curing etc. complete as per direction of Engg-in-Charge .(Ground Floor) |
| 72 | Cement punning including cost, conveyance of cement and curing etc. complete as per direction of Engg-in-Charge .(Ground Floor) |
| 73 | Recessedwiringto lightpoint/fan point/exhaustfan point/callbell pointwith 1.5sq.mmFR PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non-metalic PVC flexible conduit with 5 Amp, 250 V modular type switch ISI marked and ceiling rose ISI marked mounted on MS box having front modular cover of suitable size , MS modular box with 1.0 sq.mm FR PVC insulated single core multistrand copper conductorasearthwireincludingallaccesoriesand connectionasperdirectionofEngineerinCharge.(Make of wire Finolex / L&T / Anchor / Havels / V Guard ) Group-A |
| 74 | Group-B |
| 75 | Group-C |
| 76 | SupplyingandfixingoffollowingMODULARtypeBell pushon the existing switch box / cover including connections etc as required. as perdirection of EngineerinCharge.(MakeofwireFinolex/L&T/Anchor / Havels / V Guard ) Ground Floor+ 1st Floor |
| 77 | Recessedwiringtosubmainin2x2.5sq.mmFRPVC insulatedsinglecoremultistrandcopperconductorof ISI marked confirming to IS-694/1990 in 20 mm dia non- metalicheavy duty flexibleconduit1.6mmthickalong with 1 x 1.5 sq.mm FR PVC insulated single core multistrandcopperconductorasearthwireas equired.(MakeofwireFinolex/L&T/Anchor/Havels/VGuard)Ground Floor + 1st Floor+ 2nd Floor |
| 78 | Recessedwiringtosubmainin2x4sq.mmFRPVC insulatedsinglecoremultistrandcopperconductorof ISI marked confirming to IS-694/1990 in 20 mm dia non- metalicheavy duty flexibleconduit1.6mmthickalong with 1 x 1.5 sq.mm FR PVC insulated single core multistrandcopperconductorasearthwireas equired.(MakeofwireFinolex/L&T/Anchor/Havels/VGuard) Ground Floor + 1st Floor+ 2nd Floor |
| 79 | Recessedwiringtosubmainin2x6sq.mmFRPVC insulatedsinglecoremultistrandcopperconductorof ISI marked confirming to IS-694/1990 in 20 mm dia non- metalicheavy duty flexibleconduit1.6mmthickalong with 1 x 2.5 sq.mm FR PVC insulated single core multistrandcopperconductorasearthwireas equired.(MakeofwireFinolex/L&T/Anchor/Havels/V Guard) Ground Floor + 1st Floor+ 2nd Floor |
| 80 | Recessedwiringtosubmainin2x10sq.mmFRPVC insulatedsinglecoremultistrandcopperconductorof ISI marked confirming to IS-694/1990 in 20 mm dia non- metalicheavy duty flexibleconduit1.6mmthickalong with 1 x 4.0 sq.mm FR PVC insulated single core multistrandcopperconductorasearthwireas equired.(MakeofwireFinolex/L&T/Anchor/Havels/V Guard)Ground Floor + 1st Floor+ 2nd Floor |
| 81 | Recessed wiring to Supply and fixing of01 no.sof 3pin 5/6ampmodularsocketandS.P.5/6amponeway modularswitch,1no.of 5pin 15/16socket outlet and S.P.15/16AonewaymodularswitchonModularG.I.Box with Modular Base and cover. .(Make of wire Finolex/L&T/Anchor/Havels/V Guard) Ground Floor + 1st Floor+ 2nd Floor |
| 82 | Supply and fixing of 3 pin 6Amp plugwith 6Amp switch on existing board (Modulartype ).(Make of wire Finolex/L&T/Anchor/Havels/V Guard) Ground Floor + 1st Floor+ 2nd Floor |
| 83 | Supplying and fixing suitablesizeGIboxwithmodular plate and cover in front on surface or in recess, including providing and fixing 03 no.s of 6 pin 5/6 & 01 no. of 15/16 A modular socket outlet and 15/16 A modularswitch,connectionsetc.asrequired.(Makeof wireFinolex/L&T/ Anchor/ Havels/V Guard) Ground Floor + 1st Floor+ 2nd Floor |
| 84 | SupplyingandfixingofCallBell/BuzzerISImarked suitable forDC /AC single phase 230 volts complete as required(Makeofwire Finolex/L&T/Anchor/Havels/VGuard) Ground Floor + 1st Floor |
| 85 | Supplyandfixingof followingwaysinglepoleand neutral,sheetsteel,MCBdistributionboardconsumer unit,240Vonsurface/recess,completewithtinned copperbusbar,neutralbusbar,earthbar,dinbar, hinged front acrylic covr for the MCB knobs detachable gland plate, interconnections, phosphatized and powder painted including earthing etc. as required ( But with out MCB / RCCB / Isolator)6 WAY (8 + 18) DOUBLE DOOR, HORIZONTAL TYPE Ground Floor + 1st Floor |
| 86 | Supplyandfixingof5Ampto32Arating240V\"B/C\" seriesMCBsuitableforlightingandotherloadsofthe following poles in the exiting MCB DB ISI marked completewithconnectionstestingandcommissioning etc. as required.(make-HPL/ Havells/ Legrand /L&T/C&S)Ground Floor + 1st Floor |
| 87 | Copper Earth Plate electrode Supply and fixing of copper plate earthing( 600 X 600 X 3.15mm )with running copper flat 25 X 5mm from copper plate to funnel of40mm dia G.I pipe including all accessories etc. as required.(make-HPL/ Havells/Legrand /L&T/C&S) |
| 88 | Salt / charcoal for pipe earth electrode CopperEarthPlateelectrodeExtraforusingsaltand charcoal for G.I or copper pipe earth elctrrode as required.(make-HPL/ Havells/ Legrand /L&T/C&S) |
| 89 | S/F of 1200mm High Speed Ceiling fan Alluminium Body, Copperwinding,Highspeedceilingfan(Make- CromptonModel-RivieraHighSpeed,PolycabModel-Vital, Polar Model-Winpro) etc. Ground Floor + 1st Floor |
| 90 | S/F of 8\"PLASTIC VENTILLATING FAN exhaust fan (Make-Crompton Model-Jura, Polycab Model-Vital, PolarModel-Winpro) etc. Ground Floor + 1st Floor |
| 91 | S/Fof 1x18 WattLEDT-5fitting(Make-Crompton/Philips/Havells/Bajaj) Ground Floor + 1st Floor+2nd floor |
| 92 | S/Fof 60 W LED Street light fitting(Make-Crompton/Philips/Havells/Bajaj) |
| 93 | S/F OF TP & N SFU IN CUBICAL PANEL BOARDProviding and fixing of following capacity TP& N disconnectorfuseswitchunitinsideexistingcubical panel board with ISI marked HRC fuses including drillingholesincubicalpannel,makinfgconnectionas requred etc, complete100 Amp TP & N |
| 94 | 63Amp 4WAY TPN bus barSupply and fixing of copper bus bar with suitable sheet metal enclosureon MS angle frame with proper grouting on wall including all connections. |
| 95 | S/F OF TP & N SFU IN CUBICAL PANEL BOARDProviding and fixing of following capacity TP& N disconnectorfuseswitchunitinsideexistingcubical panel board with ISI marked HRC fuses including drillingholesincubicalpannel,makinfgconnectionas requred etc, complete100 Amp TP & N |
| 96 | MV cable laying up to 25 sq.mm on surfaceLayingandfixingofonenumberofPVCinsulatedand PVC seathed / XLPE power cable of 1.1 KV grade of size notexceeding 25 sq.mmon surface as required. |
| 97 | Fixing of lightning conductor finialFixingoflightningconductorfinialmadeupof25mm dia 300 mm long , Copper tube / G.I. tube having single prong at top with 85 mm dia 6 mm thick G.I. base plate ISI marked including holes etc. as requredincluding allconnections. |
| 98 | P/Fofcoppertapeonparapetorwallsurface(Vertical run)Providing and fixing of copper tape 20 mm x 3 mm thick onparapetorsurfaceofwallforlightningconductorcomplete as required. (For vertical run)as required. |
| 99 | S/F TP MCB ISOLATOR - 100 AmpSupplyandfixingoffollowingratingfourpole415V isolatorintheexistingMCBDBISImarkedcomplete with connection testing and commissioning etc. as required. |
| 100 | S/F OF MCCB IN CUBICAL PANEL BOARD-100A 10KSupply and fixing of 4 pole MCCB 100 A,10KA breaking capacity in existing cubicle panel board including drilling holes in cubcle panel, making connections, etc. as required. |
| 101 | S/F OF MAIN SWITCHES ISI Marked-100Amp TPNSupply, Installation, Testing, and Commissioning of 100 Amp TPN Main switches of following capacity (IS 13940 Part3/1993)onexisting surface/wallmountnting and completewithHRCFuselinks,interconnections, earthing, etc. as required as per direction of Engineer in Charge.Make-SEIMENS/HPL/ANCHOR/L&T/HAVELS/C &S/ RK |
| 102 | Providing and fixing M.V danger board of 250 mm x 200 mmmademildsteelatleast2mmthickandvitreous enameledwhiteonbothsidesandwithinscriptioninsingle red colours on front side as requred. |
| 103 | S/F of 20 Watt LED Square surface mountfitting (Make-Havells/Philips/C&S/Crompton) as requred. |
| 104 | Cutting holes through existing brick work including making good the same in cement mortar (1:4) for taking GI/PVC pipes and fittings etc all complete as per Engg.-in- charge.250mm wall (All Floor) |
| 105 | Cutting holes in R.C.C floors and roos upto 19cm thick for passing G.I/P.V.C pipes and fitting etc. and prepairing the holes after insertion of pipe etc. with cement concrete 1:2:4 including finishing complete so as to make it leak proof as per Engg.-in- charge.(All Floor) |
| 106 | Cutting grooves in pucca floors and walls for taking GI/PVC pipes and making good the damages as per specification etc complete as per Engg.-in- charge.(All Floor) |
| 107 | Providing and fixing on wall face unplasticised Rigid PVC soil, waste and rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS: 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes complete as per direction of Engineer-in-Charge75mm OD P.V.C. SWR S/S Pipe (ISI type-A) All Floor |
| 108 | 90mm OD P.V.C. SWR S/S Pipe (ISI type-A)(for rain water)All Floor |
| 109 | 110mm OD P.V.C. SWR S/S Pipe (ISI type-A)All Floor |
| 110 | Laying in trenches unplasticised PVC pipes IS:4985-2000 and specials of the following outside diameter for all classes including jointing with supply of approved solvent cement by heat application method including testing as per specification complete. (Earth work in trenches to be measured and paid for separately) 125mmdia rigid UPVC pipe Class -3 (0.60Mpa) All Floor |
| 111 | 160mmdia rigid UPVC pipe Class -3 (0.60Mpa) All Floor |
| 112 | 200mmdia rigid UPVC pipe Class -3 (0.60Mpa) All Floor |
| 113 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes conforming to IS:15778, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 20mm dia pipe (All Floor) |
| 114 | 25mm dia pipe(All Floor) |
| 115 | 40mm dia pipe (All Floor) |
| 116 | 50mm dia pipe (All Floor) |
| 117 | Providing and fixing on wall face unplasticised-PVC moulded fittings / accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansios etc complete as per direction of Engineer-in-Charge .PVC SWR coupler:-75 mm dia PVC SWR coupler (All Floor) |
| 118 | 90 mm dia PVC SWR coupler (All Floor) |
| 119 | 110 mm dia PVC SWR coupler(All Floor) |
| 120 | Single tee with door:75 x 75 x 75mm dia PVC SWR Tee (All Floor) |
| 121 | 90 x 90 x 90mm dia PVC SWR Tee (All Floor) |
| 122 | 110 x 110 x 110mm dia PVC SWR Tee(All Floor |
| 123 | SWR Plain Bend 87.5°:75mm diaP.V.C. SWR plain bend 87.5 (All Floor) |
| 124 | 90mm diaP.V.C. SWR plain bend 87.5(All Floor) |
| 125 | 110mm diaP.V.C. SWR plain bend 87.5(All Floor) |
| 126 | SWR PlainDoor Bend 87.5°:-75mm diaP.V.C. SWR plain bend 87.5(All Floor |
| 127 | 90mm diaP.V.C. SWR plain bend 87.5(All Floor) |
| 128 | 110mm diaP.V.C. SWR plain bend 87.5(All Floor) |
| 129 | Fixing 100mm size ‘P’ or ‘S’ trap (with horn or without horn) for water closet squatting pan including jointing the trap with pan in cement mortar (1:1) as per specification. etc complete as per direction of Engineer-in-Charge.‘P’trap (with horn or without horn)(All Floor) |
| 130 | ‘S’trap (with horn or without horn)(All Floor) |
| 131 | Fixing water closet, squatting pan (Indian type W.C pan) conforming to IS 2556 : Part 3-2004 duly embedded in cement concrete (1:4:8) using hard granite metal 4cm nominal size all complete as per specification alletc. complete as per direction of Engg. in charge.(All Floor) |
| 132 | Fixing wash down water closet (Europian type WC ) with integral\"S\" and \"P\" trap to the floor with wooden plug and chromum plated screw including jointing the trap including eat cover alletc. complete as per direction of Engg. in charge.(All Floor) |
| 133 | Fixing plastic seat and cover for wash down water closet with chromium plated brass hingesand rubber buffers all complete as per specificationetc. completeas per direction of Engg. in charge.(All Floor) |
| 134 | Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixersetc. completeas per direction of Engg. in charge.(All Floor) |
| 135 | FixingWash Basinwith hole for pillar type with cast iron or M S bracket painted white including cutting holes in the walls and making good the damagesetc. complete as per direction of Engg. in charge.For Wash RoomPorcelain Counter Top Basin Oval Shape (550x430)(All Floor) |
| 136 | FixingWash Basinwith hole for pillar type with cast iron or M S bracket painted white including cutting holes in the walls and making good the damagesetc. complete as per direction of Engg. in charge.Porcelain 22\"x 16\"(550x400) W.H.B.(All Floor) |
| 137 | Fixing bowl pattern urinal conforming to IS 2556 : Part 6-1996 including connecting the urinal of 430x260x350 mm or 340x410x265 mm sizes respectively with waste pipe by means of white lead mixed with chopped hemp etc all complete as per specification.etc. complete as per direction of Engg. in chargePorcelain Flat back stall type magnum Urinal . (All Floor) |
| 138 | Fixing glazed earthenware squatting plate of size 600mm x 350mm conforming to IS:2556- Part-6-1995 with integral longitudinal flushing pipe including embedding the plate in 25mm cement mortar (1:8) laid over 150mm cement concrete (1:4:8) using 40mm hard granite metal all complete as per specification etc. complete as per direction of Engg. in charge.One-seated Urinal 1m x 0.50m x 0.15m size.(All Floor) |
| 139 | Fixing PVC waste pipe of following nominal diameter for wash basin or sink including brass check nut complete as per specificationetc. complete as per direction of Engg. in charge. (All Floor) |
| 140 | Fixing 15mm dia PVC inlet connection pipe and making connection with pillar cocks and supply mains for wash basin complete as per specificationetc. complete as per direction of Engg. in charge.(All Floor) |
| 141 | Fixing of Brass Screw-down Bib Cocks (Taps) polished bright conforming to IS:781-1995 of the following nominal sizes as per specificationetc. complete as per direction of Engg. in charge. 15mm Short Body Bib Cock (All Floor) |
| 142 | 15mm Long Body Bib Cock. (All Floor) |
| 143 | Fixing of Brass Screw-down Angle/Counseales stop cock Cocks polished bright conforming to IS:781-1995 of the following nominal sizes as per specificationetc. complete as per direction of Engg. in charge.15mm dia CP Brass Angle Stop Cock (All Floor) |
| 144 | 20mm dia CP Brass Concealed Stop Cock.(All Floor) |
| 145 | Fixing of Brass 15mm dia CP flange of the following nominal sizes as per specificationetc. complete as per direction of Engg. in charge.15mm dia CP flange(All Floor) |
| 146 | Fixing Bib Cock capstan head screw down high pressure lettered ‘Hot’ and ‘Cold’ with long screws, shanks and back nuts of the following nominal bore as per specificationetc. complete as per direction of Engg. in charge.15mm dia C.P. Pillar cock with swinging spout.(All Floor) |
| 147 | C.P.revolving shower (bend type).(All Floor) |
| 148 | CP Health Foucet with 1.0 mtr PVC Tube(All Floor) |
| 149 | Fixing 600mm x 450mm bevelled edge mirror of superior glass mounted on 6mm thick A.C sheet or plywood sheet and fixed to wooden plugs with chromium plated brass screws and washers complete as per specificationetc. complete as per direction of Engg. in charge.600mm x 450mm bevelled edge mirror.(All Floor) |
| 150 | Fixing standard sized glass-shelf with Chromium Plated brass brackets and guard rails complete, fixed to woden plugs with Chromium Plated brass screws as per specification complete as per direction of Engg. in charge.C.P. glass self with glass(All Floor) |
| 151 | Fixing standard sized Chromium Plated brass towel rail complete with Chromium Plated brass brackets fixed to wooden plugs with Chromium Plated brass screws, complete as per specification. complete as per direction of Engg. in charge.C.P. towel rail.(600x20)mm(All Floor) |
| 152 | Fixing (a) Liquid Soap Container – Glass container or Plastic container with Chromium Plated brass lid and brackets fixed to wooden plugs with Chromium Plated brass screws or (b) Chromium Plated brass soap dish complete with Chromium Plated brass brackets fixed to wooden plugs with Chromium Plated brass screws or (c) white glazed tooth brush holder fixed to wooden plugs with Chromium Plated brass screws as per specification complete as per direction of Engg. in charge.C.P Soap holder/disc.(All Floor) |
| 153 | Fixing Rotational moulded polyethylene cylindrical vertical water storage tanks conforming to IS : 12701--1996 including cutting holes through the tank and fixing mild steel tubes and fittings and providing extra sockets and jam nuts, fixing ball valve etc, including hoisting upto a height of 5 metres above ground level and placing the tank to the required position etc all complete as per specification complete as per direction of Engg. in charge. 1000 litre capacity Double Layer Cylinderical Vertical water storage tanks |
| 154 | Supply , fitting and fixing of following fixers including all materials and labours etc all complete as per specification complete as per direction of Engg. in charge.450x450mm Square Man Hole Cover -16.0 kg |
| 155 | 90mm dia P.V.C. Nahani Trap |
| 156 | 110mm dia PVC SWR Single Y with door |
| 157 | PVC SWR Jalli 110mm dia |
| 158 | 110 mm dia P.V.C. SWR Vent Cowl |
| 159 | UPVC BALL VALVE Sch-80 (Solvent Welded with Metal Ball)(25mmdia) |
| 160 | 40mmdia |
| 161 | 50mmdia |
AI Tender Summary
Tender Timeline
Jun 06, 2023
11:30 IST
Tender Published
Tender notice published.
CompletedJun 22, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJun 26, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender