Housing Urban and Rular Development Government Departments Closing in 0 days TDR #38022832

Construction Work Of Non-Patchable /Missing Link Road And Road From Jhunwasa Head (Badunda) To Aibra (6.5 Km.) (Bundi) Under The Block Offices Under Circle Bundi. Pkg No Ba-23-24-Vsk-05

Issued by Government Departments · bundi, Rajasthan
Tender Value
1.21 Crore
Estimated cost
Bid Submission
12 Jun 2023
0 days left
EMD
2.42 Lakhs
Bank guarantee accepted
Document Fee
2000
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
bundi → Rajasthan
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Construction Work Of Non-patchable /Missing Link Road And Road From Jhunwasa Head (Badunda) To Aibra (6.5 Km.) (Bundi) Under The Block Offices Under Circle Bundi. Pkg No Ba-23-24-Vsk-05

Corrigendum

Sr No Corrigendum Date Corrigendum Type New Submission Date
1 08-Jun-2023 Rate Analysis Technical Bid 12-Jun-2023
2 08-Jun-2023 Component Technical Bid 12-Jun-2023
3 10-Jun-2023 Tender Document Technical Bid 12-Jun-2023

BOQ

Name of Work :- Package No BA-23-24-VSK-05
Sl. No. Item Description
1Clearing and grubbing road land including uprooting rank vegetation, grass, brush, shrubs, saplings and trees of girth upto 300mm, removal of stumps, disposal of unserviceable Material and stacking of serviceable Material upto 1000m from road boundary. (MoRTH Specification : Clause 201). BY MECHANICAL MEANS In area of Thorney Jungle
2Hkh;k ls lq[klkxj
3Total
4Construction of embankment with approved Materials deposited at site from roadway cutting and excavation from drain and foundation of other structures graded and compacted by vibratory roller 8-10 tonne to meet requirement of Tale 300-2 as per MoRTH specification : Clause No. 305
5Hkh;k ls lq[klkxj
6Total
7Providing, laying and spreading and compacting specified graded crushed stone in sub-base course including premixing the Material at OMC in mechanical mixer (Pug mill), carriage of mixed Material, laying in uniform layers with Motor Grader, F.E. Loader, on a prepared surface and compacting with Vibratory Compactor to achieve the desired density including all Material, labour, machinery, lighting barricading and maintenance of Driversion complete. (MoRTH specification clause 401). with all lead & lift
8Hkh;k ls lq[klkxj
9Total
10Providing, laying, spreading and compacting crushed graded stone aggregate as per Table 400-10 & 400.11 to Wet Mix Macadam specifications including premixing the Material with water to OMC in mechanical mixer (Pug mill) as per design mix, carriage of mixed Material by tipper to site laying in uniform layers, with motor grader/F.E. loader/Paver Finisher, in sub-base/base course on a well prepared under-base and compacting with Vibratory Roller to achieve the desired density including lighting, guarding, barricading and maintenance of Driversion etc. (MoRTH specification : Clause 406). with all lead & lift
11Hkh;k ls lq[klkxj
12Total
13Providing and applying primer coat over prepared surface of granular base with bitumen emulsion as per IS:8887 & manufacturer’s specifications @7.50 kg/10 sqm with a self propelled or towed bitumen pressure sprayer equipped for spraying the Material uniformly at specifiedrates and temperatures (including cleaning of road surface) as per MoRTH specification : Cl. 502, 112
14Hkh;k ls lq[klkxj
15Total
16Providing and applying tack coat on the prepared surface, with bitumen emulsion as per IS:8887 & manufacturer’s specifications @0.275 kg/sqm with a self propelled or towed bitumen pressure sprayer equipped for spraying the Material uniformly at specified rates and temperatures (including cleaning of road surface) as per MoRTH specification Cl. 502, 112.
17Hkh;k ls lq[klkxj
18Total
19Providing and laying open graded premix carpet 20mm thick (compacted), on prepared surface in a single course as wearing course, composed of specified graded crushed aggregates as per Table 500-23, heating bituminous binder @ 14.6 kg/10 sqm and aggregates in Hot Mix Plant (including cost of anti-stripping compound, wherever required), transporting the mixed Material with tipper and laying with paver finisher to the required level and grade, rolling with power roller, 8-10 tonne, but excluding cost of tack coat and seal coat with all lead & lift (MoRTH specification : clause 510, 112) In Hot Mix Plant 40-60 TPH, including loading of aggregates with F.E. loader bitumen VG30 grade
20Hkh;k ls lq[klkxj
21Total
22Providing and applying Premixed Seal Coat type “B” comprising of thin application of fine aggregate (0.06 cum per 10 sqm) premix with (6.8 kg per 10 sqm) bitumen binder (including cost of anti-stripping compound, wherever required) in mini hot mix plant 6-10 TPH, and laying with paver finisher and rolling with power roller 8-10 tonne, including all lead of mix Material (MoRTHspecification : clause 511).Bitumen VG30 grade
23Hkh;k ls lq[klkxj
24Total
25Kilometre Stone Reinforced cement concrete M15grade kilometre stone of standard design as per IRC:8-1980, fixing in position including painting and printing etc Ordinary kilometer stone (precast)
26Hkh;k ls lq[klkxj
27Total
28Kilometre Stone Reinforced cement concrete M15grade kilometre stone of standard design as per IRC:8-1980, fixing in position including painting and printing etc Hectometer stone (precast)
29Hkh;k ls lq[klkxj
30Total
31Providing and Erecting typical Citizens Information Board as per approved drawing & specification of MoRD, made of two MS Sheet of 1.6 mm thick each of size 900 mm × 750 mm stiffened by angle iron 25 mm ×25 mm × 3 mm all around the plate and plates fixed on frame of 75 mm dia pipe of 12 SWG sheet (vertical post 3050 m with angle holdfasts and horizontal member 900 mm) to be joined by 5 mm thick MS plate at 12 places (65 × 50 mm) duly embedded in cement concrete M-15 grade of block of 600 mm × 600 mm × 750 mm size below ground level as per enclosed drawings & as directed by Engineering - In-Charge. All MS will be stove enameled on both side, Lettering, figuring and border will be with ready mixed synthetic enamel paint of superior quality in required shade and colour etc. complete in all respect. All sections of framed post and steel tube will be painted with primer and two coat of epoxy paint as per drawing and as per MoRD specification.
32Hkh;k ls lq[klkxj
33Total
34Supply of villege Name Board size 600x900 mm made out of 1.25 mm thick M.S. Sheet duly framed with 30mm Outer Dia Mild Steel tube tightened with M.S. flat 12x3 mm fixed on two posts of size 40 mm ODMS tube 3M long whole board is processed in blue/white stoving enamel paint and white/red machine cut reflective sheet complete in all respect posts duly painted with black/white synthetic enamel.
35Hkh;k ls lq[klkxj
36Total
37Road Marking with Hot Applied Thermoplastic Compound with Reflectorising Glass Beads on Bituminous Surface Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35 .The finished surface to be level, uniform and free from streaks and holes.
38Hkh;k ls lq[klkxj
39Total
40Earthwork in excavation for foundation of structure complete with all lift, dewatering, shoring and shuttering etc. including refilling of trenches in 250 mm layer, ramming, watering and disposal of surplus soil within a lead of 1000 meters, as per drawing and technical Earth in excavation for foundation of specification. [MoRTH Specification : Clause 304]. In ordinary soil [MoRTH Specification : clause 301]BY MECHANICAL MEANS Depth upto 3m
41Hkh;k ls lq[klkxj
42Total
43Providing and laying Reinforced cement concrete pipes NP-3 for culverts including jointing ends and fixing collar with cement mortar 1:2. (MoRTH specification : clause 1000/2900). 1000 mm dia
44Hkh;k ls lq[klkxj
45Total
46Providing and laying Reinforced cement concrete pipes NP-3 for culverts including jointing ends and fixing collar with cement mortar 1:2. (MoRTH specification : clause 1000/2900). 300 mm dia
47Hkh;k ls lq[klkxj
48Total
49Providing & laying mechanically mixed and vibrated Cement Concrete in foundation upto a depth of 1.5mtr, below ground level and 1.5mtr. above ground/bed level. [MoRTH Specification : Clause 1000/1700]. (a) Cement concrete 1:3:6 mix with crushed stone aggregate 20 mm nominal size.
50Hkh;k ls lq[klkxj
51Total
52Dry lean cement concrete sub - base.Construction of dry lean cement concrete 1:3:6 sub-base over a prepared sub-grade with coarse and fine aggregate conforming to IS: 383, the size ofcoarse aggregate not exceeding 25 mm, aggregate cement ratio not to exceed 15:1, aggregate gradation after blening to be as per Table 600-1, cement content not to be less than 200 Kg/Cum, optimum moisture content to be determined during trial length construction, concrete strength not to be less than 10 Mpa at 7 days, mixed in a batching plant, transported to site, laid with a paver with electronic sensor, compacting with 8-10 tonne vibratory roller, finishing and curing.
53Hkh;k ls lq[klkxj
54Total
55Providing and Laying un-reinforced, dowel jointed, plain cement concrete pavement over a prepared sub-base with 43 grade cement, coarse and fine aggregate conforming to IS:383, maximum size of coarse aggregate not exceeding 25mm, mixed in a batching and mixing plant as per approved mix design, transported to site, laid with a fixed form or Fix form paver, spread, compacted and finished in a continuous operation including provision of contraction, expansion, construction and longitudinal joints, joint filler, separation membrane, sealant primer, joint sealant, debonding strip,, tie rod, admixtures and vacuum processing pump as approved, , finishing to lines and grades as per drawing as per MoRTH Specification : Clause No. 602, 112. Using Cement concrete M-30 pavement Grade
56Hkh;k ls lq[klkxj
57Total
58Supply of retro-reflective name board size 600×900mm made out of 2mm thick aluminium sheet fixed on post and frame made out or angle iron 50×50×6mm 3m long using stainless steel nut bolts of 8mm dia aluminium sheet is covered with high intensity grade Retro-reflective letters in black post duly painted in black and white synthetic enamel, complete in all respect confirming to MoRTH specifications (2001) cl. 801.
59Hkh;k ls lq[klkxj
60Total
61Structural cement concrete (Design Mix) in open foundations, with form work, at any level. Cement concrete for plain/reinforced concrete in open foundations as per drawing and technical specification. [MoRTH Specification : Section 1700 & 1500]. With 20mm nominal size aggregate R.C.C.M-20 grade By using concrete mixer
62Hkh;k ls lq[klkxj
63Total
64Providing and laying steel reinforcement at any level in foundation complete as per drawing and technical specification. [MoRTH Specification : Section 1600]. HYSD bar reinforcement
65Hkh;k ls lq[klkxj
66Total
67Providing and laying Reinforced Cement Concrete M-20 mix with stone aggregate 20 mm nominal size mechanically mixed and vibrated for bed plates excluding steel reinforcement but including centering and shuttering, laid in position. (MoRTH specification : clause 1000/1700)
68Hkh;k ls lq[klkxj
69Total
70Providing and laying Precast reinforced cement concrete Box culvert sectionof M-40 gradedesignedfor \"AA\" classloadingas per IRC specificationsincludingtheeffectof impact,EQetc.completeon firmbase of200mm thick leanconcrete ofM-10 grade with aggregateofsize40mmnominaloffollowinginternalsizes.The work includes required safety measures, construction of drain for diversion of flowing water, cost of design of RCC Precast Box and its proof checkingfrom IIT/MNITJaipur etc. completein all respect as per specifications Size 1.50 M x 1.50 M
71Hkh;k ls lq[klkxj
72Total
73Providing and laying Precast reinforced cement concrete Box culvert sectionof M-40 gradedesignedfor \"AA\" classloadingas per IRC specificationsincludingtheeffectof impact,EQetc.completeon formbase of200mm thick leanconcrete ofM-10 grade with aggregateofsize40mmnominaloffollowinginternalsizes.The work includes required safety measures, construction of drain for diversion of flowing water, cost of design of RCC Precast Box and its proof checkingfrom IIT/MNITJaipur etc. completein all respect as per specifications Size Size 1.00 M x 1.00 M
74Hkh;k ls lq[klkxj
75Total
76Reinforced cement concrete wearing coat M-30 grade at any level including formwork and reinforcement complete as per drawing and technical Specification. [MoRTH Specification : Clause 2204, 1500 & 1700].
77Hkh;k ls lq[klkxj
78Total

AI Tender Summary

OUR REF NO 38022832
AUTHORITY Government Departments
TENDER VALUE 1.21 Crore
LAST DATE 12-06-2023
Authority
Authority Name Public Works Department
Work Description Construction Work Of Non-patchable /Missing Link Road And Road From Jhunwasa Head (Badunda) To Aibra (6.5 Km.) (Bundi) Under The Block Offices Under Circle Bundi. Pkg No Ba-23-24-Vsk-05
Basic Detail
Tender No SE PWD CIRCLE BUNDI NITNO-05-2023-24
Bidding Type Tender
Location
City bundi
State Rajasthan
Key Dates
Publish Date 10 Jun 2023
Submission Date 12 Jun 2023
Open Date 13 Jun 2023
Finance
Tender Value 1.21 Crore
Tender Fee 2000
EMD 2.42 Lakhs
Exemption Not Available
Document List
2b4fb116-e6a1-4acf-926f-9a635c75e1ee.html
BOQ_604679.xls
Tendernotice_1.pdf
Tendernotice_2.pdf
Tendernotice_3.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Jun 10, 2023
11:30 IST

Tender Published

Tender notice published.

Completed
Jun 12, 2023
18:00 IST

Corrigendum-1 Issued

Clarifications on tender conditions and amendments issued.

Completed
Jun 12, 2023
18:00 IST

Corrigendum-2 Issued

Clarifications on tender conditions and amendments issued.

Completed
Jun 12, 2023
18:00 IST

Corrigendum-3 Issued

Clarifications on tender conditions and amendments issued.

Completed
Jun 12, 2023
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Completed
Jun 13, 2023

Bid Opening Date

Technical bids will be opened and evaluated.

Completed

Tender Documents

Download All (ZIP) ↓
html

2b4fb116-e6a1-4acf-926f-9a635c75e1ee.html

xls

BOQ_604679.xls

pdf

Tendernotice_1.pdf

pdf

Tendernotice_2.pdf

pdf

Tendernotice_3.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender

TenderDetail
Loading tenders