Tender For Services / Supply/ Supply Installation Testing Commissioning / Item Of Works, On Urgent Basis For The Works Of Special Repair Works At Various Building At Igntu Campus, Amarkantak (M.P.)
Tender Overview
Project Description
Tender For Services / Supply / Supply Installation Testing Commissioning / Item Of Works, On Urgent Basis For The Works Of Special Repair Works At Various Building At Igntu Campus, Amarkantak ( M.P. ) -1 Acoustical Panelling 2 Adhesive For Ceramic Tiles 3 Adhesive For Wood Work 4 Aluminium Accessories And Hardware 5 Aluminium Composite Panels 6 Aluminium Die-Cast Handles &Two-Point Locking Kit 7 Aluminium Extrusion / Sections 8 Aluminium Fabricator 9 Anchor Fastner / Dash Fastner 10 Anti – Termite Treatment 11 Back Up Rod 12 Batch Mix Concrete ( Bmc ) / Ready Mix Concrete ( Rmc ) 13 Bitumen 14 Cement 15 Cement: White 16 Clean Room Wall Panels With / Without Return Air Risers, Doors / Windows Etc. 17 Clear Glass / Clear Float Glass / Toughened Glass 18 Concrete Additive 19 Cover / Spacer Block 20 Curtain Rod / Drapery Rod / Venetian Blinds 21 Crash Guard / Corner Guard 22 Door Closer / Floor Spring23 Door Locks 24 Door Seal – Woolpile Weather Strip 25 Door Shutters- Flush 26 Doors & Windows Fixtures / Fitting. 27 Epoxy Flooring 28 Extruded Polystyrene Board 29 False Ceiling - Calcium Silicate Boards & Tiles 30 False Ceiling - Metal 31 False Ceiling - Mineral Fibre 32 Frp Doors 33 Fire Rated Glass 34 Fire Retardant Paint 35 Fire Seal 36 Fire: Door Closures, Mortice Dead Locks 37 Fire: D-Type Pull Handles 38 Fire: Hinges, 39 Fire: Panic Exit Devices 40 Fire: Sealant 41 Fire: Tower Bolts 42 Floor Hardener 43 Glass : Float & Mirror 44 Glass For Aluminum Doors / Windows / Structural Glazing 45 Glass Wool / Insulation Boards / Pufinsulatedroofing 46 Grc Jali 47 Grout: Non-Shrink 48 Grouting Compound49 Gypsum Board / Gypsum False Ceiling / Gypsum Partitions 50 Laminates / Veneers 51 Lead Lined Door 52 Modular Grab Bars And Disabled Hardware 53 Modular Ss Railing System 54 Neutron Shielded Door 55 Night Latch 56 Ot: Anti-Fungal Paint 57 Ot: Conductive Tile Flooring: Esd- Control Tile Flooring 58 Paints - Cement Based 59 Paint – Fire Retardent 60 Paints - Epoxy Paint 61 Paints - Oil Bound Distemper / Acrylic Washable Distemper 62 Paints - Other Paints / Primer 63 Paints - Plastic Emulsion Paint 64 Paints - Plastic Emulsion Paint ( Exterior ) 65 Paints - Synthetic Enamel Paints 66 Paints - Texture Paint 67 Paver Blocks / Tiles ( All Types ) 68 Plywood / Block Board / Ply Board 69 Polycarbonate Sheets 70 Pre-Coated Galvanised Steel Sheet 71 Pre-Laminated Particle Board 72 Pvc Continuous Fillet For Periphery Packing Of Glazings / Structural / Glazing 73 Pvc Doors 74 Pvc Flooring 75 Powder Coating Material Pure Polyester 76 Pvc Water Stops77 Rf Shielded Door 78 Reinforcement Steel / Structural Steel 79 Restroom Cubicles 80 Sandwich Puff Panel 81 Sealant: Poly-Sulphide 82 Sfrc / Rcc Manhole Covers / Perfect Rcc Grating 83 Silicon Sealants / Weather Sealant / Structural Glazing Sealant 84 Stainless Steel 85 Outdoor Sports Flooring 86 Stainless Steel Bolts, Screws, Nuts & Washers 87 Stainless Steel Clamps 88 Stainless Steel Cp Grating 89 Stainless Steel D-Handles 90 Stainless Steel Friction Stay 91 Stainless Steel Hinges 92 Stone Adhesives 93 Sunken Portion Treatment 94 Super Plasticizer 95 Tiles: Ceramic Tiles 96 Tiles: Glass Mosaic Tiles 97 Tiles: Glazed ( Ceramic ) Tiles 98 Tiles: Heat Resistant Terrace Tiles 99 Tiles: Vitrified Tiles ( Double / Multi Charged ) / Germ Free 100 Vacuum Dewatered Flooring 101 Veneered Particle Board 102 Vinyl Flooring 103 Water Proofing Materials ( Bitumenistic ) 104 Wooden Laminated Flooring 105 Auditorium Chairs 106 Expansion Joints B. Plumbing & Sanitary Works 1 Automatic Variable Temperature Control / Fixed Temperature Control Faucets 2 Central Control 3 Ball Cock 4 Ball Valves With Floats 5 Brass - Stop & Bib Cock 6 C. I Pipes & Fittings7 Centrifugally Cast Iron Hubless Pipes & Fitting 8 C.I Sluice Valve &Non-Return Valve 9 C.I Valves ( Full Way, Check And Globe Valves 10 C.I. Manhole Covers 11 C.P. Fittings: Mixer / Bib Cock / Pillar Taps / Angle Valve / Valves Washers Waste / Urinal / Spreaders / Accessories Etc. 12 Centrifugally C.I Rainwater Intel Fitting Bronze Gratings 13 Centrifugally Casted C.I. Pipes 14 Chlorinator 15 Chlorine Dosing System 16 Cockroach Trap 17 Copper Fittings ( Capillary ) 18 Disc Filter 19 Ductile Iron Fittings ( Is:9523 ) 20 Ductile Iron Pipes ( Is:8329 ) 21 E.P.D.M Gaskets 22 Forged Steel Fittings & Flanges ( For Welded Joints ) 23 Geyser 24 Hand Drier 25 Hdpe Pipes / Moulded Fittings 26 Hdpe Solution Tank 27 Inbuilt Drip Line 28 Insulation Of Hot Water Pipes 29 Liquid Level Controllers / Indicators 30 Liquid Soap Dispenser 31 Ms Saddle With G.I. Riser 32 Pvc Flushing Cistern 33 P.R.S. Dials 34 P.T.M.T. Fitting 35 Pipe Coat Material ( Pipe Protection ) 36 Pipe Fittings: G.I. 37 Pipe:- G.I. 38 Pipes & Fitting: Pvc For Swr Soil, Waste & Vent Pipes And Fittings, Type B Pvc Casing & Screen Pipes 39 Pipes & Fittings: Cpvc 40 Pipes & Fittings: Upvc 41 Pipes & Gully Trap: Stone Ware 42 Pipes And Accessories: Pe-Al-Pe 43 Pipes: Copper 44 Pipes: M.S. 45 Pipes: Pp-R ( Pn – 16 ) 46 Pipes: R.C.C 47 Plastic Seat Cover Of W.C 48 Polyethylene Storage Tank 49 Pop Up Connecting Assembly 50 Popup Spray Head 51 Rqrc Hydrant 52 Rqrc Key 53 Sensor Operated Auto Flushing System Urinals 54 Ss Gratings / Soap Dish / Towel Rail Etc. 55 Stainless Steel Sink 56 Valve Box 57 Valve: Air Release 58 Valve: Butterfly 59 Valve: Gun Metal 60 Valve: Flush 61 Valve: Mainline Isolation 62 Valve: Pressure Relief 63 Valve: Sluice / Nrv 64 Valve: Solenoid 65 Valve: Non-Return 66 Valves: Gunmetal / C.P Brass Angle 67 Vfd Pump 68 Vibration Eliminator Resisto-Flex Pads & Connections 69 Vitreous China Sanitary Wares 70 Water Cooler 71 Water Meter 72 Water Supply Pumps 73 White Glazed Fire Clay Sink Electrical 1 Elevators 2 Cable Tray / Race Ways / Floor Trunking / Wall Channels 3 Db‘S / Pre-Wired Db‘S 4 Pvc Insulated Frls - Aluminum / Copper 1.1 Kv Grade Flexible Wires 5 Ht & Lt Cables ( Power & Control Cables, Solar Cables ) 6 Led Light Fixtures And Lamps 7 Mcbs / Rccb / Isolaters / Rcbo / Change Over Switch 8 Modular Switches / Socket Outlets And Wiring Accessories With Molded Cover Plate
BOQ
| Sl. No. | Item Description |
| 1 | Disposal of surplus excavated earth |
| 2 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. |
| 3 | Treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1 :2 (1 cement : 2 Coarse sand) to match the existing floor: |
| 4 | Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation,levelling & dressing & finishing the top smooth. |
| 5 | Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing: |
| 6 | 1:1½:3 (1 cement : 1½ coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). |
| 7 | Foundations, footings, bases of columns, etc. for mass concrete |
| 8 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more |
| 9 | Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for the following grades of concrete. All works Above Plinth Level |
| 10 | Concrete of M25 grade with minimum cement content of 330 kg /cum |
| 11 | Brick work with non modular fly ash bricks conforming to IS:12894, class designation 10 average compressive strength in super structure above plinth level up to floor V level in : |
| 12 | Cement mortar 1:4 (1 cement : 4 coarse sand) |
| 13 | Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with : |
| 14 | Cement mortar 1:6 (1 cement : 6 coarse sand) |
| 15 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately). |
| 16 | Second class teak wood |
| 17 | Extra for providing frosted glass panes 4mm thick instead of ordinary float glass panes 4mm thick in doors, windows& clerestory windows, shutters (Area of opening for glass panes excluding portion inside rebate shall be measured) |
| 18 | Providing & Fixing decorative high pressure laminatedsheetofplain/ woodgrain in gloss / matt / suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S including cost of adhesive of approved quality |
| 19 | 1.0 mm thick. |
| 20 | Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters : |
| 21 | 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws. |
| 22 | Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of shutters (over all area of door shutter to be measured) |
| 23 | Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. |
| 24 | Fixed to openings /wooden frames with rawl plugs screws etc. |
| 25 | Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embeddings in cement concrete block 30x10x15cm 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) |
| 26 | Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete : |
| 27 | 250x10 mm |
| 28 | Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete : |
| 29 | 125 mm |
| 30 | Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. |
| 31 | Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works |
| 32 | Providing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. |
| 33 | 1.00 mm thick with zinc coating not less than 275 gm/m² |
| 34 | 12 mm cement plaster of mix : |
| 35 | 1:4 (1 cement: 4 coarse sand) |
| 36 | 15 mm cement plaster on rough side of single or half brick wall of mix: |
| 37 | 1:4 (1 cement: 4 coarse sand) |
| 38 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : |
| 39 | Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture |
| 40 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 41 | White washing with lime to give an even shade : New work (three or more coats) |
| 42 | Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-in-charge. |
| 43 | Made of G.I. wire of dia 4 mm |
| 44 | Providing and laying 60mm thick factory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of Engineer-in-charge. |
| 45 | Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by Engineer-in-charge). |
| 46 | Laying old cement cocrete interlocking paver blocks of any design/ shape laid in required line, level, curvature, colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineerin- charge. (Old CC paver blocks shall be supplied by the department free of cost). |
| 47 | Providing and applying integral crystalline slurry of hydrophilic in nature for waterproofing treatment to the RCC structures like retaining walls of the basement, water tanks, roof slabs, podiums, reservior, sewage & water treatment plant, tunnels / subway and bridge deck etc., prepared by mixing in the ratio of 5 : 2 (5 parts integral crystalline slurry : 2 parts water) for vertical surfaces and 3 : 1 (3 parts integral crystalline slurry : 1 part water) for horizontal surfaces and applying the same from negative (internal) side with the help of synthetic fiber brush. The material shall meet the requirements as specified in ACI- 212-3R-2010 i.e by reducing permeability of concrete by more than 90% compared with control concrete as per DIN 1048 and resistant to 16 bar hydrostatic pressure on negative side. The crystalline slurry shall be capable of self-healing of cracks up to a width of 0.50mm. The work shall be carried out all complete as per specification and the direction of the engineer-in-charge. The product performance shall carry guarantee for 10 years against any leakage. |
| 48 | Cutting holes up to 30x30 cm in walls including making good the same: With common burnt clay F.P.S. (non modular) bricks |
| 49 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed steel conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required. |
| 50 | Group C |
| 51 | Supplying and fixing of following sizes of STEEL conduit alonwith the accessories in surface/recess including painting in case of surface conduit, or cutting the wall and making good the same in case of recessed conduit as required. |
| 52 | 20 mm dia |
| 53 | Supplying and fixing following modular boxand plate etc. as required. |
| 54 | 100mmx100mmx60mm deep |
| 55 | Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. |
| 56 | 5/6 amps switch |
| 57 | 3 pin 5/6 amp socket outlet |
| 58 | 6 pin 15/16A Socket Outlet |
| 59 | Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required. |
| 60 | Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required. |
| 61 | 8 Module (125X125MM) |
| 62 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed steel PVC conduit as required |
| 63 | 2x2.5sq mm + 1x2.5 sq mm earth wire |
| 64 | Supplying and fixing of following sizes of medium class pVC conduit along with accessories in surface / recess including cutting the wall and making good the same in case of recessed conduit as required |
| 65 | 20mm |
| 66 | Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, C series Miniature Circuit Breaker suitable for inductive loads of following poles in the existing MCB DB complete with connections, testing and commissioning etc.,as required. |
| 67 | Single pole |
| 68 | Supplying and fixing rating four pole (three phase and neutral) 415 volts residual current circuit breaker (RCCB), having a senstivity currnt 30mA in the existing MCB DB complete with connections, testing and comissioning etc as required |
| 69 | 25A |
| 70 | Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required. |
| 71 | Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator). |
| 72 | 2+8 way / 10 Way, Double Door |
| 73 | Supplying and Fixing Following way, Horizontal Type Three Pole and Neutral, Sheet Steel, MCB Distribution Board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator). |
| 74 | 6 way (4+18) Double Door |
| 75 | Supplying of Following Sizes of 1.1 KV Grade MulticoreAluminium Conductor XLPE Power Cable Insulated armoured cable conforming to IS:7098 (Part - I) or as per Relevant IS Code complete with all Amendments etcand should be NABL certified as required. |
| 76 | 4 C X 16 Sq.mm Al. XLPE arm. |
| 77 | Supplying and fixing following rating, double pole, 240 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. |
| 78 | 40 Amp |
| 79 | Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, son cable tray as required.and cushioning, protective covering and refilling the trench etc as required. |
| 80 | Upto 35 sq. mm |
| 81 | Supplying and Making End Termination With Brass Compression Gland and Aluminium lugs for Following Size of PVC Insulated and PVC Sheathed / XLPE Aluminium Conductor Cable of 1.1 kV Grade as Required. |
| 82 | 4 X 16 sq. mm (28mm) |
| 83 | Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CM/M/W) minimum 6.00, Air delivery minimum 210 Cum/Min , 350 RPM (tolerance as per IS : 374-2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required. |
| 84 | Supply of Wall Mounted BRACKET light fitting suitable for 10 Watt LED Light with all accessories as required. |
| 85 | Installation, testing and commissioning of pre-wired, fluorescent fitting / compact fluorescent fitting of all types, complete with all accessories and tube/lamp etc. directly on ceiling/ wall, including connections with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as Required. |
| 86 | Earthing with GI earth pipe 4.5 metre long,40mm dia including accessories,and proving masonaryenclosure with covber plate having locking arrangement with watering pipe etc with charcoal coal and salt as required. |
| 87 | Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 meter long etc. with charcoal/ coke and salt as required. |
| 88 | Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required. |
| 89 | Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required. |
| 90 | Supplying and Installation of Exhaust fan (300mm) approved brand, all complete as per direction of Engineer-in-charge. |
| 91 | SITC of 8 Passenger MRL Lifts of 1m/s speed with 6 Stops forG+5 Building with opening on one side with fire rated Doors as per norms as per the approval of Engineer in charge. |
| 92 | Providing and fixing of 3HPStarter for Pump with sensor including all complete as per directions of Engineer-in Charge. |
| 93 | Providing and fixing of 2\" Brass Non-Return-Valve Vertical including all complete as per directions of Engineer-in Charge. |
| 94 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. |
| 95 | Coupler (75mm) |
| 96 | Single tee with door(75X75X75 mm) |
| 97 | Bend 87.5° 75 mm bend |
| 98 | Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings. |
AI Tender Summary
Tender Timeline
Tender Published
Tender notice published.
CompletedBid Submission Deadline
Online submission via eProcurement portal.
CompletedBid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender