Tender For Provision Of Store Shelter For Asc Bn Under Stn Hq Zangli, kupwara-Jammu And Kashmir

Tender For Provision Of Store Shelter For Asc Bn Under Stn Hq Zangli. 1 BR and EM Portion 2 Surface dressing n.exc 15 cm deep and getting out in soft /loose soil complete all as specified and as directed by Engr-in-Charge. 3 Excavating over areas, n.exc 1.5 m deep and getting outin soft /loose soilas directed by Engr-in-Charge. 4 Excavating over areas, exc 1.5 m and n.exc 3m deep and getting outin soft /loose soilas directed by Engr-in-Charge. 5 Excavation in trenches n.exc. 1.50mtr in depth for foundation etc or for shafts, wells, cesspits, manholes, pier holes etc n.exc 10 sqm on plan and getting out as specified &directed by Engr-in-charge. 6 Returning filling including spreading, levelling, watering and well ramming in layers not exc 25cm in soft/loose soil complete all as specified and directed. 7 Removing excavated material n.exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed. 8 M&L PCC 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) as infoundations, filling and mass concrete, complete all as specified. 9 Supply only liquid water proofing compound. 10 M&L for RCC M-30 as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.basement slabs, under-reamed piles and mass concrete etc complete all as specified. 11 M&L for RCC M-30 as Columns, pillars, piers, posts and struts complete all as specified. 12 M&L for RCC M-30 as Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified. 13 M&L for RCC M-30, Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies,deck slabs and in shelves and the like complete all as specified. 14 M&L Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter for rough finish surfaces. 15 M&L Formwork to sides of pillars, posts, struts, piers,columns and stanchions for rough finish surfaces. 16 M&L Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping)for rough finish surfaces. 17 Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc. 18 M&L for Mild steel TMT bars 10mm dia and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia or securing with clips. 19 M&L for Mild steel TMT bars 5mm dia and over and up to and incl 10mm dia in stirrups, spacers and binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and incl mild steel wire (annealed) not less than 0.90mm dia or securing with clips. Gde IIS 432 (part I) 20 M&L Mild steel Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framedbalusters; walk ways; railings; framework of water tanksand similar work conforming to Fe.290.Gde-E-165 ( ISSQ). 21 M&L for Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in CM 1:6 as in wall/septic tank/soakage well all as specified and directed. 22 M&L Rendering 15mm thick on fair faces of brick work, stone masonry or concrete surface, in cement mortar 1:4 finishedthe surface even and smooth without using extra cement , complete, all as specified 23 M&L Rendering 10mm thick on fair faces of brick work, stone masonry or concrete surface, in cement mortar 1:6 finishedthe surface even and smooth without using extra cement , complete, all as specified 24 M&L Rendering 10 mm thick on ceiling concrete surface, in cement mortar 1:3 finishedthe surface even and smooth without using extra cement completeall as specified 25 M&L for prepration of new plaster surface of wall and applying three coat of white wash complete all as specified and directed. 26 All as per item above but in ceilling. 27 M&L for two coat of Oil Bound Distemper over a coat of 2mm thick wall Putty complete all as specified and directed. 28 M&LMoorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering complete all as specified and as directed. 29 M&L Hardcore of gaugen.exc. 63mm deposited, spread and levelled in layers n exc. 15cm thick, watered and rammed to a true surfaceof broken stone or boulders. 30 M&L for 75 mm thick PCC (1:4:8) type D-2 (using 40 mm graded stoen aggregates as in sub base to floor/path/hardstanding etc. complete all as directed. 31 M&L 75mm thick PCC 1:3:6 type C-2 (using 40mmgraded crushed stone aggregate) as in plinth protection and finished even and fair,complete all as specified and as directed. 32 Machine cutkota stone slab flooring 20-25mm thick over 15 mm cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed. 33 Machine Cut Kota stone slab 20-25mm thick in riser of steps, skirting, dado, pillar laid over 10mm cement screed and jointed with ditto as specified and directed. 34 M&LMarble work 18 to 20mm thick (table rubbedand polished)in steps,jambs,pillars, windowcills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade over 10mm cement screed and jointed with ditto as specified and directed. 35 S&F false ceiling E-Board 600x 600mm tile 10mm thick semi perforated coloured, Anodised aluminium snap grid frame work (Size of grid 605 x 605mm )with GI suspended system, metal frame work, G.I. wire mesh in flase ceiling complete. make Arms strong/ other ISI MARKED approved by GE as specified and directed. 36 M & L for chequered cement concrete tiles 30cm X 30cmX22mm thick set and jointed and poied in neat cement slurry in floor with gray cement and pigment over cement screed 15mm thick in Cement Mortar 1:6 complete all as specified and directed. 37 S&F prepainted galvalume aluminium zink coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550MPa as in roof covering/cladding to wall, fixed with self tapping screwincluding necessary scaffolding, anytype, any location/height complete all as specified anddirected by Engr-in-Charge. 38 S & F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws including necessary scaffolding, anytype, any location/ height complete all as specified anddirected by Engr-in-Charge. 39 M&L Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections )Fe -410-W(gde-E-250) Quality A including distance pieces, cleats etc. 40 Rolled sections as in main and cross beams, hip and jack rafters; purlins where connectedto common rafters and running rails and guides for sliding doors; fixedwithangle cleats or other connecting plates 41 M&L Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachmentall as specified anddirected by Engr -in charge. 42 M&L Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 10cm andn exc 15cm long, Diameter of neck in 11 to 15mm complete all as specified and directed. 43 M&L for applying two coats of synthetic enamel paint over a coat of red oxide primer including preparation of new steel surfaces of any description over 10cm width or girth not otherwise described andall as specified and as directed. 44 S & FPlain, framed, panelled shutters 35mm thick (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats sizes of me-mbers of shutters as specified inSSR Part I, Section 8, clause 8.24(a); supplied and fitted to chowkats all as specified. 45 S&F Pressed steel framesof size 125 x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc complete all fitting items all as specified anddirected by Engr -in charge. 46 S & F Mild Steel butt hinges 100mm long medium weight. 47 S & F Mild Steel butt hinges 75mm long medium weight. 48 S & F 200 Mild steel barrel tower bolts, stove enamelled black, with bright bolt 49 S & F 150 Mild steel barrel tower bolts, stove enamelled black, with bright bolt 50 S & F 300 mm long Mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed 51 S & F Mild steel pressed handles, 150mm oval type, stove enamelled black 52 S & F Mild steel pressed handles, 125 mm oval type, stove enamelled black 53 S&F Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay,complete with glazing bars, dovetailed or welded.Incl. frane & lugs etc. complete all as specified and as directed. 54 Sheet glass, ordinary quality and glazing with oil putty in square n.exc 0.5 sqm in each pane. 55 Point wiring for one light point/Ex/fan point controlled by one switch with 1.5 sqmm PVC FRLS insulated un-sheathed copper conductor single core multi strand cable and 1.5 sqmm PVC FRLS insulated un-sheathed copper conductor single core multi stranded cable (green color) as earth lead in and including cable 1100 volts grade including 25mm casing and capping (ISI marked) for one light/ fan point controlled by one switch including CI/MS sunk box of required size, & as directed by Engr in Charge including 3mm thick plastic laminated top sheet cover, including cutting chases to wall and making good the disturbed surfaces to match with theexisting specification complete all as specified. Note - Wiring will be as per SSR Part-I and Part II Spoecification and wire will be orignate in DB and end in lt end. 56 All as per item above but for 3 pin 5 amps socket outlet on independent board complete all as specified and directed. 57 All as per item above but for 3 pin 5 amps socket outlet on the sameboard with other switch complete all as specified and directed. 58 All as per item above but wiring with 2.5 sqmm copper wire ( FRLS)and 1.5 sqmm earth wire for socket outlet 6 pin 15 amps on independent board complete as directed by engineer in charge . 59 Supply & fixing Switch piano type flush 6 Amp Single pole one way ( ISI Marked) complete all as specified and directed. Make : Havells/Anchor. 60 Supply & Fixing Socket outlet 2 in1, 3 pin 5 Amps flush type complete all as specified and directed.Make : Havells/Anchor. 61 S&F Switch socket combination 5 in 1, 5 and 15 Amp flush type universal controlled by one switch (ISI marked) complete all as specified and directed. 62 Supply & Fixing ceiling rose surface backelite 65x50mm two to threeterminal (ISI marked).Make : Havells/Anchor. 63 S&F lamp holder/batton holder/angle holder insulated body with bakelite back plate suitable for fittings complete all as specifiedand directed. 64 S&F in replacement of CFLs with LEDLamp, B22type ,14 watt,complete all as specified and directed. 65 M&L for LED Batten 1x20 W for regal batten for LED Universalbatten for G 13 T with 18 W tube rods and Ultra bright LED Polycarbonate tube light very high efficiency suited for installation in existing T8 and connecting electrically using PVC insulated and overall sheathed flexible copper conductor cable of size 0.75 sqmm 3 core all as required at site or directed by Engineer-in-Charge. 66 S & F LED light fitting 1x9W/1X10Wbulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size all as specified and directed. 67 S&F in replacement sub Main Wiring with two PVC insulated unsheathed multistrand FRLS flexible copper conductor cable of size 2x6 sqmm and one PVC insulated multistrand unsheathed FRLS flexible copper conductor cable of size 6 sqmm(green colour)as earthing lead connecting to main earthing dolly drawn in and including non metallic PVC concealed conduit 20mm dia complete andmaking good to disturbed surface complete of wall/floor with cement mortar and finishes to match the existing surface complete all as specified and directed. 68 S & Finreplacement of sheet metal enclosure MCB distribution board, double door with IP-43 protection single phase 240 volts 12 way, including suitable size copper bus bar and neutral link fixed flush in wall including chases in wall for fixing DB and making good the distributed wall surfaces to match with existing specification complete all as specified and directed. 69 M & Lfor MCB SP 240 volts any rating from 6 to 40 amps, C cruve with rupturing capacity 10 KA, including providing thimble for out going cablescomplete all as specified and directed. 70 M & L for MCB SPN 240 volts any rating from 6 to 40 amps,C cruve with rupturing capacity 10 KA, including providing thimble for out going cablescomplete all as specified and directed. 71 Earthing complete with galvanised steel earth plate electrode 60cmx60cmx6.3cm thick burried directly in ground ( earth pit not less than 2.25 mtr deep below normal ground level)with top edge of the plate not less than 1.5m below normal ground level, connected to galvanised iron wire 4.0mm dia by means of bolts, nuts and washers of galvanised iron or steel all as shown in electrical plate No 3 connected to earthing test all as specified or indicated including testing on completion. 72 S & F in replacementbldg secuirty light fitting energy saving high efficiency LED street light fitting 25 Watts, 5700 K, IP 66, having pressure die cast housing with toughened glass and individual high power LEDs with secondary optics, prismatic polycarbonate cover complete including GI bracket of size 32 mm dia bent to shape having length on less than 1.5 mtr fixing with clamp etc and making connections using cord flexible 3 core copper cable of size 23/ .0076 from ceilling rose/ PVC connector to light fittings or as directed by Engr-in-chrage. 73 M&L for sand cushioning to under ground cables with a layer of sand 8 cm before laying the cable and 15 cm after laying the cable complete all as specified 74 M&L for Brick covering with equal to length of brick as mechanical protection to cable with well burnt sub class B bricks laid as directed. 75 Supply and lay cable XLPE Insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty)1100 Volts grade with stranded aluminiumconductor of size 16 sq mm 2 core.

Sr No	CorrigendumDate	Corrignedum	CorrigendumType	NewSubmissionDate
1	26-Jun-2023	Bid Auto Extn Corrigendum	Bid Auto Extn Corrigendum	03-07-2023
2	03-Jul-2023	Bid Auto Extn Corrigendum	Bid Auto Extn Corrigendum	08-07-2023
3	08-Jul-2023	Bid Auto Extn Corrigendum	Bid Auto Extn Corrigendum	11-07-2023

INR 500 /-

INR 83500.0 /-

Refer document

Name of Work : PROVN OF STORE SHELTER FOR ASC BN UNDER STN HQ ZANGLI

Sl. No.	Item Description
1	BR and EM Portion
2	Surface dressing n.exc 15 cm deep and getting out in soft /loose soil complete all as specified and as directed by Engr-in-Charge.
3	Excavating over areas, n.exc 1.5 m deep and getting outin soft /loose soilas directed by Engr-in-Charge.
4	Excavating over areas, exc 1.5 m and n.exc 3m deep and getting outin soft /loose soilas directed by Engr-in-Charge.
5	Excavation in trenches n.exc. 1.50mtr in depth for foundation etc or for shafts, wells, cesspits, manholes, pier holes etc n.exc 10 sqm on plan and getting out as specified &directed by Engr-in-charge.
6	Returning filling including spreading, levelling, watering and well ramming in layers not exc 25cm in soft/loose soil complete all as specified and directed.
7	Removing excavated material n.exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed.
8	M&L PCC 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) as infoundations, filling and mass concrete, complete all as specified.
9	Supply only liquid water proofing compound.
10	M&L for RCC M-30 as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.basement slabs, under-reamed piles and mass concrete etc complete all as specified.
11	M&L for RCC M-30 as Columns, pillars, piers, posts and struts complete all as specified.
12	M&L for RCC M-30 as Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified.
13	M&L for RCC M-30, Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies,deck slabs and in shelves and the like complete all as specified.
14	M&L Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter for rough finish surfaces.
15	M&L Formwork to sides of pillars, posts, struts, piers,columns and stanchions for rough finish surfaces.
16	M&L Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping)for rough finish surfaces.
17	Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc.
18	M&L for Mild steel TMT bars 10mm dia and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia or securing with clips.
19	M&L for Mild steel TMT bars 5mm dia and over and up to and incl 10mm dia in stirrups, spacers and binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and incl mild steel wire (annealed) not less than 0.90mm dia or securing with clips. Gde IIS 432 (part I)
20	M&L Mild steel Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framedbalusters; walk ways; railings; framework of water tanksand similar work conforming to Fe.290.Gde-E-165 ( ISSQ).
21	M&L for Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in CM 1:6 as in wall/septic tank/soakage well all as specified and directed.
22	M&L Rendering 15mm thick on fair faces of brick work, stone masonry or concrete surface, in cement mortar 1:4 finishedthe surface even and smooth without using extra cement , complete, all as specified
23	M&L Rendering 10mm thick on fair faces of brick work, stone masonry or concrete surface, in cement mortar 1:6 finishedthe surface even and smooth without using extra cement , complete, all as specified
24	M&L Rendering 10 mm thick on ceiling concrete surface, in cement mortar 1:3 finishedthe surface even and smooth without using extra cement completeall as specified
25	M&L for prepration of new plaster surface of wall and applying three coat of white wash complete all as specified and directed.
26	All as per item above but in ceilling.
27	M&L for two coat of Oil Bound Distemper over a coat of 2mm thick wall Putty complete all as specified and directed.
28	M&LMoorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering complete all as specified and as directed.
29	M&L Hardcore of gaugen.exc. 63mm deposited, spread and levelled in layers n exc. 15cm thick, watered and rammed to a true surfaceof broken stone or boulders.
30	M&L for 75 mm thick PCC (1:4:8) type D-2 (using 40 mm graded stoen aggregates as in sub base to floor/path/hardstanding etc. complete all as directed.
31	M&L 75mm thick PCC 1:3:6 type C-2 (using 40mmgraded crushed stone aggregate) as in plinth protection and finished even and fair,complete all as specified and as directed.
32	Machine cutkota stone slab flooring 20-25mm thick over 15 mm cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.
33	Machine Cut Kota stone slab 20-25mm thick in riser of steps, skirting, dado, pillar laid over 10mm cement screed and jointed with ditto as specified and directed.
34	M&LMarble work 18 to 20mm thick (table rubbedand polished)in steps,jambs,pillars, windowcills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade over 10mm cement screed and jointed with ditto as specified and directed.
35	S&F false ceiling E-Board 600x 600mm tile 10mm thick semi perforated coloured, Anodised aluminium snap grid frame work (Size of grid 605 x 605mm )with GI suspended system, metal frame work, G.I. wire mesh in flase ceiling complete. make Arms strong/ other ISI MARKED approved by GE as specified and directed.
36	M & L for chequered cement concrete tiles 30cm X 30cmX22mm thick set and jointed and poied in neat cement slurry in floor with gray cement and pigment over cement screed 15mm thick in Cement Mortar 1:6 complete all as specified and directed.
37	S&F prepainted galvalume aluminium zink coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550MPa as in roof covering/cladding to wall, fixed with self tapping screwincluding necessary scaffolding, anytype, any location/height complete all as specified anddirected by Engr-in-Charge.
38	S & F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws including necessary scaffolding, anytype, any location/ height complete all as specified anddirected by Engr-in-Charge.
39	M&L Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections )Fe -410-W(gde-E-250) Quality A including distance pieces, cleats etc.
40	Rolled sections as in main and cross beams, hip and jack rafters; purlins where connectedto common rafters and running rails and guides for sliding doors; fixedwithangle cleats or other connecting plates
41	M&L Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachmentall as specified anddirected by Engr -in charge.
42	M&L Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 10cm andn exc 15cm long, Diameter of neck in 11 to 15mm complete all as specified and directed.
43	M&L for applying two coats of synthetic enamel paint over a coat of red oxide primer including preparation of new steel surfaces of any description over 10cm width or girth not otherwise described andall as specified and as directed.
44	S & FPlain, framed, panelled shutters 35mm thick (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats sizes of me-mbers of shutters as specified inSSR Part I, Section 8, clause 8.24(a); supplied and fitted to chowkats all as specified.
45	S&F Pressed steel framesof size 125 x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc complete all fitting items all as specified anddirected by Engr -in charge.
46	S & F Mild Steel butt hinges 100mm long medium weight.
47	S & F Mild Steel butt hinges 75mm long medium weight.
48	S & F 200 Mild steel barrel tower bolts, stove enamelled black, with bright bolt
49	S & F 150 Mild steel barrel tower bolts, stove enamelled black, with bright bolt
50	S & F 300 mm long Mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed
51	S & F Mild steel pressed handles, 150mm oval type, stove enamelled black
52	S & F Mild steel pressed handles, 125 mm oval type, stove enamelled black
53	S&F Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay,complete with glazing bars, dovetailed or welded.Incl. frane & lugs etc. complete all as specified and as directed.
54	Sheet glass, ordinary quality and glazing with oil putty in square n.exc 0.5 sqm in each pane.
55	Point wiring for one light point/Ex/fan point controlled by one switch with 1.5 sqmm PVC FRLS insulated un-sheathed copper conductor single core multi strand cable and 1.5 sqmm PVC FRLS insulated un-sheathed copper conductor single core multi stranded cable (green color) as earth lead in and including cable 1100 volts grade including 25mm casing and capping (ISI marked) for one light/ fan point controlled by one switch including CI/MS sunk box of required size, & as directed by Engr in Charge including 3mm thick plastic laminated top sheet cover, including cutting chases to wall and making good the disturbed surfaces to match with theexisting specification complete all as specified. Note - Wiring will be as per SSR Part-I and Part II Spoecification and wire will be orignate in DB and end in lt end.
56	All as per item above but for 3 pin 5 amps socket outlet on independent board complete all as specified and directed.
57	All as per item above but for 3 pin 5 amps socket outlet on the sameboard with other switch complete all as specified and directed.
58	All as per item above but wiring with 2.5 sqmm copper wire ( FRLS)and 1.5 sqmm earth wire for socket outlet 6 pin 15 amps on independent board complete as directed by engineer in charge .
59	Supply & fixing Switch piano type flush 6 Amp Single pole one way ( ISI Marked) complete all as specified and directed. Make : Havells/Anchor.
60	Supply & Fixing Socket outlet 2 in1, 3 pin 5 Amps flush type complete all as specified and directed.Make : Havells/Anchor.
61	S&F Switch socket combination 5 in 1, 5 and 15 Amp flush type universal controlled by one switch (ISI marked) complete all as specified and directed.
62	Supply & Fixing ceiling rose surface backelite 65x50mm two to threeterminal (ISI marked).Make : Havells/Anchor.
63	S&F lamp holder/batton holder/angle holder insulated body with bakelite back plate suitable for fittings complete all as specifiedand directed.
64	S&F in replacement of CFLs with LEDLamp, B22type ,14 watt,complete all as specified and directed.
65	M&L for LED Batten 1x20 W for regal batten for LED Universalbatten for G 13 T with 18 W tube rods and Ultra bright LED Polycarbonate tube light very high efficiency suited for installation in existing T8 and connecting electrically using PVC insulated and overall sheathed flexible copper conductor cable of size 0.75 sqmm 3 core all as required at site or directed by Engineer-in-Charge.
66	S & F LED light fitting 1x9W/1X10Wbulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size all as specified and directed.
67	S&F in replacement sub Main Wiring with two PVC insulated unsheathed multistrand FRLS flexible copper conductor cable of size 2x6 sqmm and one PVC insulated multistrand unsheathed FRLS flexible copper conductor cable of size 6 sqmm(green colour)as earthing lead connecting to main earthing dolly drawn in and including non metallic PVC concealed conduit 20mm dia complete andmaking good to disturbed surface complete of wall/floor with cement mortar and finishes to match the existing surface complete all as specified and directed.
68	S & Finreplacement of sheet metal enclosure MCB distribution board, double door with IP-43 protection single phase 240 volts 12 way, including suitable size copper bus bar and neutral link fixed flush in wall including chases in wall for fixing DB and making good the distributed wall surfaces to match with existing specification complete all as specified and directed.
69	M & Lfor MCB SP 240 volts any rating from 6 to 40 amps, "C" cruve with rupturing capacity 10 KA, including providing thimble for out going cablescomplete all as specified and directed.
70	M & L for MCB SPN 240 volts any rating from 6 to 40 amps,"C" cruve with rupturing capacity 10 KA, including providing thimble for out going cablescomplete all as specified and directed.
71	Earthing complete with galvanised steel earth plate electrode 60cmx60cmx6.3cm thick burried directly in ground ( earth pit not less than 2.25 mtr deep below normal ground level)with top edge of the plate not less than 1.5m below normal ground level, connected to galvanised iron wire 4.0mm dia by means of bolts, nuts and washers of galvanised iron or steel all as shown in electrical plate No 3 connected to earthing test all as specified or indicated including testing on completion.
72	S & F in replacementbldg secuirty light fitting energy saving high efficiency LED street light fitting 25 Watts, 5700 K, IP 66, having pressure die cast housing with toughened glass and individual high power LEDs with secondary optics, prismatic polycarbonate cover complete including GI bracket of size 32 mm dia bent to shape having length on less than 1.5 mtr fixing with clamp etc and making connections using cord flexible 3 core copper cable of size 23/ .0076 from ceilling rose/ PVC connector to light fittings or as directed by Engr-in-chrage.
73	M&L for sand cushioning to under ground cables with a layer of sand 8 cm before laying the cable and 15 cm after laying the cable complete all as specified
74	M&L for Brick covering with equal to length of brick as mechanical protection to cable with well burnt sub class "B" bricks laid as directed.
75	Supply and lay cable XLPE Insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty)1100 Volts grade with stranded aluminiumconductor of size 16 sq mm 2 core.